Determination of manganese in some medicinal plants and their infusions by a catalytic spectrophotometric method

The catalytic effect of manganese (II) on the oxidation of the azo dye 3-Methyl-6-(2-hydroxyethoxy)-2-[2-methoxy-4-N (N, N diethylamino) phenylazo] benzothiazolium methylsulphate, with potassium periodate in the presence of 1,10-phenanthroline in weakly acidic media was studied. The reaction was followed spectrophotometrically by measuring the decrease in the absorbance of the dye at 560 nm. Under the optimum conditions (4 x 10(-5) mol dm(-3) azo dye, 4 x 10(-4) mol dm(-3) potassium periodate, 1 x 10(-4) mol dm(-3) 1,10-phenanthroline, 0.1 mol dm(-3) buffer--pH 3.0, 70 degrees C, 8 min) manganese (II) in the range 0.1-5 ng cm(-3) could be determined by the fixed-time method with a detection limit of 0.035 ng cm(-3). The developed method is highly sensitive, selective, and simple. The method was applied successfully to the determination of total manganese in some medicinal plants and to analyse their infusions for trace amounts of total manganese and free manganese (II) ions without separation.     

A selective catalytic colorimetric determination of manganese in subnanogram amounts through oxidation of sulphanilic acid by potassium periodate with 1,10-phenanthroline as activator

Summary The catalytic oxidation of sulphanilic acid by potassium periodate with manganese(II) as catalyst has been studied with 1,10-phenanthroline as an activator. The activator takes part in the formation of mixed complexes with the catalyst and the reagents, which favours contact and electron transfer between the latter. By this mechanism, 1,10-phenanthroline lowers the detection limit of the reaction by more than two orders of magnitude and increases its selectivity. On the basis of the investigations made, a catalytic method with low detection limit (0.5 ng/ml) and good reproducibility (coefficient of variation 2.6%) for the determination of manganese(II) in pure solutions has been developed.     

Kinetic, spectrophotometric determination of nanogram levels of manganese(II) using catalytic azo dye—potassium periodate—1,10-phenanthroline system

The catalytic effect of manganese(II) on the oxidation of the dye, sodium salt of 4-(2-hydroxynaphth-1-ylazo)benzenesulfonic acid, with potassium periodate in the presence of 1,10-phenanthroline in weakly acidic media was studied. The reaction was followed spectrophotometrically by measuring the decrease in the absorbance of the dye at λ = 483 nm. Under the optimum conditions Mn(II) concentration within the range of 0.08–4 ng cm⁻³ could be determined by the fixed-time method with a detection limit of 0.025 ng cm⁻³. The method was applied for the determination of manganese content in tomatoes, aubergine, white radish, and French beans. The results showed a good agreement with those obtained by atomic absorption spectrophotometry.     

Spectrophotometric determination of vanadium with 1,10-phenanthroline

A simple and sensitive spectrophotometric method for the determination of vanadium based upon the reaction of vanadate with 1,10-phenanthroline in the presence of sodium dithionite in ammoniacal solution is described. The absorbance of the complex measured at 645 nm follows Beer's law for solutions containing 30-400 microg of vanadium in 100 ml of solution. A 10-fold excess of molybdenum, tungsten, phosphorus or chromium does not interfere. The molar absorptivity is 8.0 x 10(3) 1 mole(-1) cm(-1). The complex is shown to be tris-1,10-phenanthroline vanadium(II). The method has been applied successfully to the determination of vanadium in bauxite.     

Spectrophotometric determination of iron in highly alkaline solution with 4-hydroxy-1,10-phenanthroline

4-Hydroxy-1,10-phenanthroline forms a stable tris-chelate with iron(II) in the range of alkalinity from pH 10 to 2M sodium hydroxide, with molar absorptivity 1.19 x 10(4) l.mole(-1).cm(-1) at 545 nm. The determination of iron is performed by adding the phenanthroline, stannous chloride, and iron-free sodium hydroxide to the sample to give pH > 13; stannite is the active reductant. Beer's law is obeyed over the iron concentration range from 1 x 10(-5) to 8 x 10(-5)M. Advantages over existing methods are the use of stannous chloride instead of sodium dithionite, which avoids the problem of turbidity, and the stability of the iron(II) chelate towards oxidation by air. The conditional reduction potential at pH 11 for the iron(III)/iron(II) complex couple is 0.39 V.     

Synthesis and characterization of manganese(II), nickel(II), copper(II) and zinc(II) Schiff-base complexes derived from 1,10-phenanthroline-2,9-dicarboxaldehyde and 2-mercaptoethylamine

The synthesis of a new Schiff base containing 1,10-phenanthroline-2,9-dicarboxaldehyde and 2-mercaptoethylamine is described. The reaction of 1,10-phenanthroline-2,9-dicarboxaldehyde with 2-mercaptoethylamine leads to 2,9-bis(2-ethanthiazolinyl)-1,10-phenanthroline (I) which undergoes rearrangement when reacted with manganese, nickel, copper or zinc ions to produce complexes of the tautomeric Schiff base 2,9-bis[2-(2-mercaptoethyl)-2-azaethene]-1,10-phenanthroline (L). The [M(L)Cl₂] complexes [where M = Mn(II), Ni(II), Cu(II) and Zn(II) ions] were characterized by physical and spectroscopic measurements which indicated that the ligand is a tetradentate N₄ chelating agent.     

Catalytic kinetic simultaneous determination of iron, silver and manganese with the Kalman filter by using flow injection analysis stopped-flow spectrophotometry

A catalytic differential kinetic method with Kalman filter for the simultaneous determination of multi-component is described. The oxidization of Rhodamine B (RB) by potassium periodate in a slightly acid solution is a slow reaction. But iron(III), silver(I) or manganese(II) has a differential catalytic effect on the oxidation reaction of RB in the presence of 1,10-phenanthroline as the activator. So iron, silver and manganese can be simultaneously determined by measuring the decreasing absorbance of the dye (RB) at 555 nm. A flow injection analysis stopped-flow spectrophotometric system with a microcomputer performs the determinations. This method has been applied to determining iron, silver and manganese of alloy samples with satisfactory results.     

Effects of auxiliary complex-forming agents on the rate of metallochromic indicator colour-change-III: mechanism of the colour change of tac in nickel-edta titrations

The rate of the ligand-substitution reaction of nickel(II)-TAC chelate (NiR(2)) with EDTA (Y) and 1,10-phenanthroline (X) has been determined spectrophotometrically in 20% v v dioxan over the pH range 5.7-6.3 at mu = 0.1 (KNO(3)) and 25 +/- 1 degrees . The substitution reaction with EDTA proceeds through the following two pathways: NiR(2) + H(+) right harpoon over left harpoon NiR(+) + HR, and NiR(2) + H(2)O right harpoon over left harpoon NiR(OH) + HR, The reaction of NiR(+) or NiR(OH) with EDTA is the rate-determining step, and k(1) = 2.1 x 10(3) l .mole(-1) .sec(-1) and k(2) = 7.9 x 10(6) l .mole(-1) .sec(-1).The substitution reaction with 1,10-phenanthroline proceeds as follows: NiR(+) + X right harpoon over left harpoon NiRX(+) At higher concentrations of 1,10-phenanthroline the release of TAC from NiR(2) by hydrogen ion is the rate-determining step, and k(3) = 2.4 x 10(5) l .mole(-1). sec(-1). At lower concentrations of 1,10-phenanthroline -d[NiR(2)]/dt is proportional both to [H(+)] and [X]. The value k(4) = 5.1 x 10(4) l. mole(-1). sec(-1) was calculated by the use of the steady-state approximation for [NiRX(+)]. The substitution with 1,10-phenanthroline proceeds much faster than that with EDTA. By the addition of a small amount of 1,10-phenanthroline, Ni can be titrated with EDTA at 50 degrees, with TAC as an indicator.     

Hexacyanoferrate(III) as a mediator in the determination of total iron in potable waters as iron(II)-1,10-phenanthroline at a single-use screen-printed carbon sensor device

Hexacyanoferrate(III) was used as a mediator in the determination of total iron, as iron(II)-1,10-phenanthroline, at a screen-printed carbon sensor device. Pre-reduction of iron(III) at −0.2 V versus Ag/AgCl (1 M KCl) in the presence of hexacyanoferrate(II) and 1,10-phenanthroline (pH 3.5-4.5), to iron(II)-1,10-phenanthroline, was complete at the unmodified carbon electrode surface. Total iron was then determined voltammetrically by oxidation of the iron(II)-1,10-phenanthroline at +0.82 V, with a detection limit of 10 μg l⁻¹.In potable waters, iron is present in hydrolysed form, and it was found necessary to change the pH to 2.5-2.7 in order to reduce the iron(III) within 30 s. A voltammetric response was not found at lower pH values owing to the non-formation of the iron(II)-1,10-phenanthroline complex below pH 2.5.Attempts to incorporate all the relevant reagents (1,10-phenanthroline, potassium hexacyanoferrate(III), potassium hydrogen sulphate, sodium acetate, and potassium chloride) into a modifying coated PVA film were partially successful. The coated electrode behaved very satisfactorily with freshly-prepared iron(II) and iron(III) solutions but with hydrolysed iron, the iron(III) signal was only 85% that of iron(II).     

Thermal lens studies of the reaction of iron (II) with 1,10-phenanthroline at the nanogram level

The determination of iron(II) with 1,10-phenanthroline in aqueous solutions was carried out exemplarily by thermal lens spectrometry. The peculiarities of analytical reactions at the nanogram level of reactants can be studied using this method. Under the conditions of the competing reaction of ligand protonation, the overall stability constant for iron(II) chelate with 1,10-phenanthroline was determined at a level of n x 10(-7) mol L(-1), logbeta3 = 21.3+/-0.1. The rates of formation and dissociation of iron(II) tris-(1,10-phenanthrolinate) at a level of n x 10(-8) mol L(-1) were found to be (2.05+/-0.05) x 10(-2) min(-1) and (3.0+/-0.1) x 10(-3) min(-1), respectively. The conditions for the determination of iron(II) with 1,10-phenanthroline by thermal lensing were reconsidered, and ascorbic acid was shown to be the best reducing agent, which provided minimum and reproducible sample pretreatment. Changes in the conditions at the nanogram level improved both the selectivity and sensitivity of determination. The optimum measurement conditions for thermal lensing were determined not only by the absorption of the analyte and reagents, but also by the background absorption of the solvent. The limits of detection and quantification of iron(II) at 488.0 nm (excitation beam power 140 mW) are 1 x 10(-9) and 6 x 10(-9) mol L(-1), respectively; the reproducibility RSD for the range n x 10(-8)-n x 10(-6) mol L(-1) is 2-5%.     

Spectrophotometric flow injection determination of l-ascorbic acid with a packed reactor containing ferric hydroxide

A flow injection system with spectrophotometric detection is proposed for determining l-ascorbic acid in pharmaceutical formulations. In this system a column containing Fe(OH)(3) immobilized in polyester resin (packed reactor) is inserted before the detector. Fe(III)-1,10-phenanthroline complex is reduced by l-ascorbic acid to produce Fe(II)-1,10-phenanthroline complex which is monitored at 510 nm. Under the optimum analytical conditions, the linearity of the calibration equation for l-ascorbic acid ranged from 5.0x10(-6) to 6.0x10(-5) M of added amount. The detection limit was 5.0x10(-7) M and recoveries between 98.5-102.0% were obtained. No interference was observed from the common excipients of pharmaceutical formulations and other active substances such as acetylsalicylic acid, caffeine and thiamine.     

Photometric determination of selenium with ferrocene

A sensitive spectrophotometric method for the determination of selenium has been developed. The method depends on a redox reaction between selenious acid in 8M hydrochloric acid and a chloroform solution of ferrocene. One mole of selenious acid produces 4 moles of ferricenium ions, which are then oxidized by bromine water. The resulting iron(III) is reduced to iron(II) and determined with 1,10-phenanthroline. The relative standard deviation for 20 mug of selenium was 1.1%. The apparent molar absorptivity of the final solution, referred to selenious acid, is 4.23 x 10(4) 1. mole(-1). cm(-1) at 512 nm. This method has been used to determine selenium in copper metal.     

Kinetic Determination of Nanogram Levels of Manganese(II) by Naphthol Blue Black–Potassium Periodate–1,10-Phenanthroline System

 The catalytic effect of manganese(II) on the oxidation of Naphthol Blue Black, with potassium periodate in the presence of 1,10-phenanthroline in weakly acidic media is studied. The reaction is followed spectrophotometrically by measuring the decrease in the absorbance of the dye at 618 nm. Under the optimum conditions (3 × 10⁻⁵ mol dm⁻³ Naphthol Blue Black, 6 × 10⁻⁴ mol dm⁻³ potassium periodate, 1 × 10⁻⁴ mol dm⁻³ 1,10-phenanthroline, 0.1 mol dm⁻³ acetate buffer – pH 4.0, 60 °C, 5 min) manganese(II) in the range 0.08–4 ng cm⁻³ can be determined by the fixed-time method with a detection limit of 0.025 ng cm⁻³. The influence of foreign ions on the accuracy of the results is investigated. The developed method is highly sensitive, selective, and simple. The method was applied successfully to the determination of manganese in cucumbers, garlic cloves and parsley leaves. Received June 12, 2000. Revision December 12, 2000.     

Kinetic Spectrophotometric Determination of Nanogram Levels of Manganese (II) Based on its Catalytic Effect on the Oxidation of an Azo Compound with Potassium Periodate in the Presence of 1, 10-Phenanthroline

ABSTRACT

The catalytic effect of manganese (II) on the oxidation of Diphenylamine-4-azo-benzen-4'-sulfonic acid potassium salt with potassium periodate in the presence of 1, 10-phenanthroline in weakly acidic media was studied. A catalytic kinetic spectrophotometric method for determination of manganese (II) in the range 0.05 – 2.5 ng ml-^?1 can be determined by the fixed-time method with a detection limit of 0.017 ng ml-^?1. The method was applied successfully to the determination of manganese (II) in tap water and human urine.     

Rapid automated in-situ monitoring of total dissolved iron and total dissolved manganese in underground water by reverse-flow injection with chemiluminescence detection during the process of water treatment

Measurement of iron and manganese is very important in evaluating the quality of natural waters. We have constructed an automated Fe(II), total dissolved iron(TDI), Mn(II), and total dissolved manganese(TDM) analysis system for the quality control of underground drinking water by reverse flow injection analysis and chemiluminescence detection(rFIA-CL). The method is based on the measurement of the metal-catalyzed light emission from luminol oxidation by potassium periodate. The typical signal is a narrow peak, in which the height is proportional to light emitted and hence to the concentration of metal ions. The detection limits were 3 x 10(-6)mug ml(-1) for Fe(II) and the linear range extents up to 1.0 x 10(-4) and 5 x 10(-6)mug ml(-1) for Mn(II) cover a linear range to 1.0 x 10(-4)mug ml(-1). This method was used for automated in-situ monitoring of total dissolved iron and total dissolved manganese in underground water during water treatment.     

Enzymatic method for the determination of inorganic and organic inhibitors of alcohol dehydrogenase

The inhibiting effect of heavy metal ions, organic nitrogen-containing heterocyclic compounds, and amino acids on the catalytic activity of yeast alcohol dehydrogenase (ADH) in the reaction of ethanol oxidation by nicotinamide adenine dinucleotide was detected. Sensitive procedures were developed for the determination of the most effective ADH inhibitors [mercury (II), silver(I), zinc(II), copper(II), 1,10-phenanthroline, 2,2′-dipyridyl, 8-hydroxyquinoline, quinoline, 3,4-dimethylimidazole, benzimidazole, 1,2,3-benzotriazole, histidine, tryptophan, proline, and histamine] with c_L = 5x 10^-10-1 x 10^-4M (RSD = 1–12%).     

Extraction and spectrophotometric determination of cobalt with dithizone

Cobalt(II) in acetate-tartrate buffer (pH 6.0-7.3) is extracted quantitatively as cobalt(III) dithizonate with excess of dithizone in CCl(4). The molar absorptivity in the CCl(4) phase is 4.6 x 10(4) 1.mole(-1).cm(-1) at the absorption maximum 550 nm. The calibration graph is linear for 1-10 mug of cobalt in 10 ml of CCl(4) when excess of dithizone is removed by back-extraction with 0.01M aqueous ammonia. Most interferences can be overcome by (a) initial extraction with dithizone at pH 1.3, (b) selective back-extraction into hydrochloric acid (pH 1 to 2), (c) oxidation of iron and tin to iron(III) and tin(IV) and addition of fluoride to complex the former, and (d) selective reaction of nickel dithizonate with 1,10-phenanthroline in the CCl(4) phase followed by back-extraction of nickel into 0.1M acid. The method has been applied to determination of cobalt in a copper-nickel-zinc alloy and a nimonic alloy.     

Development of FIA equipped with a chemiluminescence detector using a mixed reagent of luminol and 1,10-phenanthroline.

We developed an FIA system equipped with a chemiluminescence detector using a mixed chemiluminescence reagent of luminol and 1,10-phenanthroline for the detection of metal ions and metal complexes. The carrier, mixed chemiluminescence reagent comprising luminol, 1,10-phenanthroline, and cethyltrimethylammonium bromide, and H2O2 solutions were fed by corresponding pumps at a definite flow rate. Sample solutions dissolving hematin, [Co(NH3)4(H2O)2]2(SO4)3, CuSO4, NiCl2, K3[Fe(CN)6], and K4[Fe(CN)6] were analyzed as models by the means of the present FIA system. Solutions of hematin, [Co(NH3)4(H2O)2]2(SO4)3, CuSO4, and NiCl2 were detected as positive peaks, as usual. The order of the catalytic activity of these samples for the present chemiluminescence reaction using the mixed chemiluminescence reagent was [Co(NH3)4(H2O)2]2(SO4)3 > hematin > CuSO4 > NiCl2. On the other hand, sample solutions of K3[Fe(CN)6] and K4[Fe(CN)6] were detected as negative peaks and were determined over the ranges of 1 x 10(-8) - 1 x 10(-6) M with a detection limit of 1 x 10(-8) M and 2 x 10(-8) - 4 x 10(-6) M with a detection limit of 2 x 10(-8) M, respectively. Their negative peaks were observed reproducibly with a relative standard deviation of 2 - 5%.     

High selective determination iron(II) by its enhancement effect on the fluorescence of pyrene-tetramethylpiperidinyl (TEMPO) as a spin fluorescence probe

A novel fluorescence method determination for iron(II) with a high selectivity and sensitivity has been proposed, based on the enhancement of fluorescence signals resulting from specific redox reaction between synthesized spin fluorescence probe pyrene-tetramethylpiperidinyl (TEMPO) and iron(II). Under the experimental conditions, fluorescent probe displayed a rapid and linear response for iron(II) over the concentration range from 2.4 x 10(-7) to 3.6 x 10(-6) mol/L. The limit of detection was 4.0 x 10(-8) mol/L. The relative standard deviation of six replicate measurements was 1.90% for 3.0 x 10(-7) mol/L iron(II). Because of the specific redox reaction between developed spin fluorescence probe and iron(II), there are few interference by other ions, especially in the presence of relative high concentration iron(III). The method has been successfully applied for iron(II) determinations in two different kinds of real samples. Results determined by the proposed method agree favorably with those determined UV-vis spectrometry method with 1,10-phenanthroline.     

New colorimetric methods for the determination of trazodone HCl,famotidine, and diltiazem HCl in their pharmaceutical dosage forms

Two sensitive and simple spectrophotometric methods are developed for the determination of trazodone HCl, famotidine, and diltiazem HCl in pure and pharmaceutical preparations. The methods are based on the oxidation of the cited drugs with iron(III) in acidic medium. The liberated iron(II) reacts with 1,10-phenanthroline (method A) and the ferroin complex is colorimetrically measured at 510 nm against reagent blank. Method B is based on the reaction of the liberated Fe(II) with 2,2-bipyridyl to form a stable colored complex with lambda(max )at 520 nm. Optimization of the experimental conditions was described. Beer's law was obeyed in the concentration range of 1-5, 2-12, and 12-32 microg mL(-1) for trazodone, famotidine, and diltiazem with method A, and 1-10 and 8-16 microg mL(-1) for trazodone and famotidine with method B. The apparent molar absorptivity for method A is 1.06x10(5), 2.9x10(4), 1.2x10(4) and for method B is 9.4x10(4 )and 1.6x10(4), respectively. The suggested procedures could be used for the determination of trazodone, famotidine, and diltiazem, both in pure and dosage forms without interference from common excipients.