PVC Membrane electrodes for manual and flow-injection determination of tetraphenylborate: Applications to separate and sequential titrations of some metal ions

Three novel poly (vinyl chloride) matrix membrane electrodes, highly sensitive and selective for tetraphenylborate anion (TPB), are developed and electrochemically evaluated. They are based on the use of iron(II) bathophenanthroline, nickel(II) bathophenanthroline-and nitron-TPB ion-pair complexes as electroactive materials with dioctylphthalate (DOP) and 2-nitrophenyl phenyl ether (NPPE) as plasticizing solvent mediators. The electrodes exhibit stable and rapid near-Nernstian response for 10(-2)-10(-6)M TPB over the pH range 4-10. Use of these electrodes for direct potentiometric determination and potentiometric titration of as low as 1 mug of TPB/ml and 0.6 mg of TPB/ml give results with average recoveries of 99.3% (mean standard deviation 0.5%) and 99.4% (mean standard deviation 0.2%), respectively. Incorporation of nitron-TPB PVC sensor in a flow-through sandwich cell provides an efficient flow-injection detector for determining TPB with an input rate of at least 60 samples/hr. The limit of detection is 1.6 mug TPB/ml in a 20-mul sample. The electrodes are also used to monitor separate and sequential titrations of some metal ions with TPB. Alkaline earth and transition-metal ions upon reaction with polyethylene glycol and ethylenediamine, respectively, form cationic complexes readily titrated with TPB. Optimum conditions are outlined for sequential titrations of various combinations of metallic species.     

Amitriptyline-selective plastic membrane sensors and their pharmaceutical applications.

The construction and general performance characteristics of potentiometric amitriptyline-plastic membrane sensors, based on ion-pair complexes with triphenylstilbenylborate and tetra(2-chlorophenyl)borate, respectively, are described. Both electrodes show near-Nernstian responses over the range 1 x 10(-2)-7 x 10(-6) mol dm-3 with a detection limit of about 5 x 10(-6) mol dm-3. The electrodes proved useful in the determination of amitriptyline hydrochloride in pure drug substances and pharmaceutical preparations. They were also applied to the determination of content uniformity and dissolution rate of sugar-coated amitriptyline tablets. The physical processes were numerically simulated by typical equations.     

Potentiometric sensors enabling fast screening of the benign prostatic hyperplasia drug alfuzosin in pharmaceuticals, urine and serum

The construction and characterization of potentiometric membrane electrodes are described for the quantification of alfuzosin, a drug used in a mono- and combined therapy of benign prostatic hyperplasia (BPH). The membranes of these electrodes consist of alfuzosin hydrochloride-tetraphenyl borate, (Az-TPB), chlorophenyl borate (Az-ClPB), and phosphotungstate (Az(3)-PT) ion associations as molecular recognition reagent dispersed in PVC matrix with dioctylpthalate as plasticizer. The performance characteristics of these electrodes, which were evaluated according to IUPAC recommendations, revealed a fast, stable and liner response for alfuzosin over the concentration ranges of 8.3 x 10(-6) to 1.0 x 10(-2) M, 3.8 x 10(-6) to 1.0 x 10(-2) M, 7.5 x 10(-7) to 1.0 x 10(-2) M AzCl with cationic slopes of 57.0, 56.0 and 58.5 mV/decade, respectively. The solubility product of the ion-pair and the formation constant of the precipitation reaction leading to the ion-pair formation were determined conductometrically. The electrodes, fully characterized in terms of composition, life span and usable pH range, were applied to the potentiometric determination of alfuzosin hydrochloride ion in different pharmaceutical preparations and biological fluids without any interference from excipients or diluents commonly used in drug formulations. The potentiometric method was also used in the determination of alfuzosin hydrochloride in pharmaceutical preparations in four batches with different expiration dates. Validation of the method showed suitability of the proposed electrodes for use in the quality control assessment of alfuzosin hydrochloride. This potentiometric method offers the advantages of high-throughput determination, simplicity, accuracy, automation feasibility, and applicability to turbid and colored sample solutions.     

Potentiometric sensor for the high throughput determination of tetramisole hydrochloride

The electrochemical response characteristics of poly(vinyl)chloride (PVC) based membrane sensors for determination of tetramisole hydrochloride (TmCl) is described. The membranes of these electrodes consist of tetramisole-tetraphenyl borate (Tm-TPB), chlorophenyl borate (Tm-ClPB), and phosphotungstate (Tm(3)-PT) ion associations dispersed in a PVC matrix with dibutylpthalate as a plasticizer. The electrodes were fully characterized in terms of composition, life span, usable pH range, and working concentration range and ionic strength. The electrodes showed Nernstian response over the concentration ranges of 7.4 x 10(-7) to 1.0 x 10(-2) M, 1.7 x 10(-6) to 1.0 x 10(-2) M, and 5.6 x 10(-6) to 1.0 x 10(-2) M TmCl, respectively, and were applied to the potentiometric determination of tetramisole ion in pure solutions and pharmaceutical preparations. The potentiometric determination was also used in the determination of tetramisole in pharmaceutical preparations in four batches of different expiration dates. The electrodes exhibited good selectivity for TmCl with respect to a large number of excipients such as inorganic cations, organic cations, amino acids, and sugars. The solubility product of the ion-pair and the formation constant of the precipitation reaction leading to the ion-pair formation were determined conductometrically. The new potentiometric method offers the advantages of high-throughput determination, simplicity, accuracy, automation feasibility, and applicability to turbid and colored sample solutions.     

Construction and Application of a PVC Membrane Enoxacin Ion－selective Electrode Based on a Needle－shaped Inner Reference Electrode

IntroductionPVC membrane- coated- wire electrodes areused in the analytical field widely. They are pre-pared usually with platinum wire,silver wire orgraphite rod coated with a PVC thin membranecontaining various active components and plasticiz-ers[1— 3 ] .The electrodes have no inner KCl solutionand they are notinfluenced by the sample pressure.Furthermore,they are free from directional selec-tivity when they are installed,and they can be mi-crominiaturized easily. The shortcomings of th…     

Determination of fluoxetine in pharmaceutical preparations and biological samples using potentiometric sensors based on polymeric membranes

The construction and general performance of four novel potentiometric membrane sensors for the determination of fluoxetine have been described. The sensors are based on the formation of the ion association complex of fluoxetine with sodium tetraphenylborate and phosphotungstic acid as electroactive materialles, dispersed in a PVC matrix with dibuthyl sebacate (or diethyl sebacate) as a plasticizer. These sensors exhibit fast, stable and near-Nernstian response for the monocharged fluoxetine cation over wide concentration range from 3.0 × 10^?6 to 1.2 × 10^?2 M and pH 4.0–7.5. No interferences are caused by many inorganic and organic species. Direct potentiometric determinations of 5–100 μg/mL of fluoxetine in drug and urine samples show good recovery of fluoxetine. The developed membrane electrodes have been used as an end point indicator electrode; the potentiometric titration of fluoxetine with sodium tetraphenylborate as a titrant has been monitored.     

Maltodextrins as new chiral selectors in the design of potentiometric, enantioselective membrane electrodes

Maltodextrins (dextrose equivalent (DE) 4.0-7.0, 13.0-17.0, and 16.5-19.5) are proposed as novel chiral selectors for the construction of potentiometric, enantioselective membrane electrodes. The potentiometric, enantioselective membrane electrodes can be used reliably for the assay of S-captopril as raw material and in pharmaceutical formulations such as Novocaptopril tablets, by use of direct potentiometry. The best response was obtained when maltodextrin with higher DE was used for construction of the electrode. The best enantioselectivity and time-stability was achieved for the lower DE maltodextrin. L-proline was found to be the main interferent for all the proposed electrodes. The surface of the electrodes can be regenerated by simply polishing; this furnishes a fresh surface ready for use in a new assay.     

Moclobemide-selective membrane electrode and its pharmaceutical applications

A liquid membrane electrode prepared with moclobemide-dipicrylamine ion-pair complex, dissolved in nitrobenzene as solvent, was studied for analytical performance. The linear response covers the range 10(-3)-10(-6) M moclobemide solution, with a slope of 50.7 mV decade(-1) (pH range 3.5-8). The detection limit is 3 x 10(-7) M. The electrode shows stability, good reproducibility and fast response. The selectivity of the electrode is good. There are two important interfering ions: mianserin and thiamine (Vitamin B(1)). The compression excipients (such as Mg(2+), starch, talcum powder) do not interfere. These characteristics of the electrode enabled it to be used for the determination of moclobemide in drugs and as an active substance, via indirect and direct potentiometric methods. Via an indirect potentiometric method moclobemide, as an active substance, can be determined with an average recovery of 99.96% and a relative standard deviation of 0.85%, and this method can also be used for its determination in drugs with a relative standard deviation of < 2%. The electrode is useful for the determination of the dissolution rate of moclobemide tablets. The physical processes are numerically simulated by typical equations. The apparent first-order rate constants for disintegration and dissolution were calculated.     

Liquid and poly (vinyl chloride) matrix membrane electrodes for the selective determination of cocaine in illicit powders

The construction of liquid membrane and PVC matrix-type cocainium ion selective electrodes and their use for direct potentiometry and potentiometric titration of cocaine are described. The ion-pair complexes of cocaine cation with reineckate and tetraphenylborate anions are either dissolved in nitrobenzene solvent or dispersed in a PVC matrix, with DOP or DBS plasticizer, and used as the ion-exchange membranes. The electrochemical response characteristics of electrodes incorporating these types of membranes are evaluated with regard to the effect of pH, foreign basic compounds, temperature and gamma-radiation. The electrodes display a stable fast Nernstian response for 10(-2)-10(-5)M cocainium cation over the pH range 3-7, the lower limit of detection being 1 mug/ml. Determination of as low as 20 mug/ml cocaine hydrochloride shows an average recovery of 98% and a mean standard deviation of +/-0.6%. The electrodes exhibit useful analytical characteristics for determining cocaine in some illicit powders. The results agree fairly well with those obtained by gas-liquid chromatography.     

Optimization of polymeric triiodide membrane electrode based on clozapine-triiodide ion-pair using experimental design

Central composite design (CCD) and response surface methodology (RSM) were developed as experimental strategies for modeling and optimization of the influence of some variables on the performance of a new PVC membrane triiodide ion-selective electrode. This triiodide sensor is based on triiodide-clozapine ion-pair complexation. PVC, plasticizers, ion-pair amounts and pH were investigated as four variables to build a model to achieve the best Nernstian slope (59.9 mV) as response. The electrode is prepared by incorporating the ion-exchanger in PVC matrix plasticized with 2-nitrophenyl octal ether, which is directly coated on the surface of a graphite electrode. The influence of foreign ions on the electrode performance was also investigated. The optimized membranes demonstrate Nernstian response for triiodide ions over a wide linear range from 5.0 x 10(-6) to 1.0 x 10(-2)mol L(-1) with a limit of detection 2.0 x 10(-6) mol L(-1) at 25 degrees C. The electrodes could be used over a wide pH range 4-8, and have the advantages of easy to prepare, good selectivity and fast response time, long lifetime (over 3 months) and small interferences from hydrogen ion. The proposed electrode was successfully used as indicator electrode in potentiometric titration of triiodide ions and ascorbic acid.     

Construction of a permanganate ion-selective electrode and its application to potentiometric titrations

The construction of a liquid-membrane type permanganate ion-selective electrode and its application to potentiometric titrations are described. The benzylcetyldimethylammonium-permanganate ion-pair in the aqueous phase is easily extracted into nitrobenzene and the extract is employed as the liquid ion-exchange membrane of the ion-selective electrode. The electrode gives Nernstian response to permanganate in the concentration range from 10(-6) to 10(-1)M, and the potential is almost independent of pH over the range from 3.0 to 10.5. The electrode can be used as indicator electrode in potentiometric titrations with permanganate.     

Triiodide Ion‐Selective Electrode Based on Charge‐Transfer Complex of 4,7,13,16,21,24‐Hexaoxa‐1,10‐diazabicyclo‐[8.8.8]hexacosane

Two new highly selective triiodide electrodes have been prepared using charge‐transfer complex of iodine with cryptand 222 as an electroactive ionophore and nitrophenyl octyl ether as a plasticizing agent. The electrodes showed Nernstian response to triiodide ions over a concentration range from 1.0 × 10^?;2 — 7.9 × 10^?;7 M and from 1.0 × 10^?;2 — 1 × 10^?;6 M with detection limits of 6.3 × 10^?;7 and 7.9 × 10^?;7 M for cryptand and its charge‐transfer complex with iodine, respectively. The response times (t_95%) of the sensors were 10 and 5 s. The membrane could be used for more than 1 month without any divergence in potentials. The proposed sensors exhibited very high selectivity for triiodide ion over other anions, and could be used in a wide pH range ?2–10. These electrodes were successfully applied as an indicator electrode in potentiometric titration of copper in ore samples.     

Construction and performance characteristics of new tetramisole selective plastic membrane electrodes

New tetramisole (Tm) ion selective PVC membrane electrodes are constructed based on either the ion-pair complex Tm TPB (Electrode I) where TPB is tetraphenylborate or the ion associate Tm(3) PT (Electrode II) where PT is phosphotungstate. The rectilinear concentration ranges of Electrodes I and II are 4 x 10(-5)-10(-2)M (average slope = 55.7 mV/concentration decade) and 5 x 10(-5)-10(-2)M TmCl (average slope = 57.0 mV/concentration decade), at 25 degrees C, respectively. The life time of the two Electrodes I and II are 14 and 49 days of continuous working, respectively. The change in pH does not affect the electrodes performance within the range 3.0-5.5, 3.0-6.0 and 3.0-7.0 for Tm concentrations 10(-2) 5 x 10(-3) and 10(-3)M, respectively. The isothermal coefficients of Electrodes I and II are found to be 0.000667 and 0.001164 V/ degrees C, respectively. The electrodes proved to be highly selective for TmCl towards inorganic cations, sugars and amino acids. The standard addition method and potentiometric titration are used to determine Tm in pure solutions and in tetramisole 10% oral solution. Regeneration process for the exhausted Electrodes I and II is applied successfully by soaking them in a solution of NaTPB and PTA, respectively.     

Phenothiazine Drug Poly(vinyl chloride) Matrix Membrane Electrodes and Their Use in Pharmaceutical Analysis

The construction and performance characteristics of ion-selective membrane electrodes for phenothiazine drugs based on their ion-pair complexes with tetraphenylborate and dinonylnaphthalenesulfonate in a poly(vinyl chloride) matrix are described. The electrodes show a near-Nernstian response over various ranges depending on the nature of the phenothiazine drug. The selectivity of these electrodes to a number of amino acids, alkaloids, neurotransmitters, quaternary ammonium compounds, and other drugs or pharmaceutical excipients is reported. The standard additions method and potentiometric titrations are used to determine the phenothiazine drugs in pharmaceutical preparations with satisfactory results.     

A new construction for a potentiometric, enantioselective membrane electrode--its utilization to the S-captopril assay

A novel potentiometric, enantioselective membrane electrode based on graphite paste (graphite powder and paraffin oil) has been constructed. The graphite paste is impregnated with 2-hydroxy-3-trimethylammoniopropyl-beta-cyclodextrin (as chloride salt) solution, 10(-3) mol l(-1). The potentiometric, enantioselective membrane electrode can be used reliable for S-captopril assay as raw material and from Novocaptopril tablets, using a chronopotentiometry (zero current) technique, in the 10(-6)-10(-2) mol l(-1) concentration range (detection limit 2 x 10(-7) mol l(-1)), with an average recovery of 99.99% (RSD=0.05%). The enantioselectivity was determined over R-captopril and D-proline. The response characteristics of the enantioselective, potentiometric membrane electrode were determined also for R-captopril. It was shown that only L-proline is the main interfering compound. The surface of the electrode can be regenerated by simply polishing, obtaining fresh surface ready to be used in a new assay.     

Ion-selective electrodes for potentiometric determination of ranitidine hydrochloride, applying batch and flow injection analysis techniques.

New ranitidine hydrochloride (RaCl)-selective electrodes of the conventional polymer membrane type are described. They are based on incorporation of ranitidine-tetraphenylborate (Ra-TPB) ion-pair or ranitidine-phosphotungstate (RaPT) ion-associate in a poly(vinyl chloride) (PVC) membrane plasticized with dioctylphthalate (DOP) or dibutylphthalate (DBP). The electrodes are fully characterized in terms of the membrane composition, solution temperature, and pH. The sensors showed fast and stable responses. Nernstian response was found over the concentration range of 2.0 x 10(-5) M to 1.0 x 10(-2) M and 1.0 x 10(-5) M to 1.0 x 10(-2) M in the case of Ra-TPB electrode and over the range of 1.03 x 10(-5) M to 1.00 x 10(-2) M and 1.0 x 10(-5) M to 1.0 x 10(-2) M in the case of Ra-PT electrode for batch and FIA systems, respectively. The electrodes exhibit good selectivity for RaCl with respect to a large number of common ions, sugars, amino acids, and components other than ranitidine hydrochloride of the investigated mixed drugs. The electrodes have been applied to the potentiometric determination of RaCl in pure solutions and in pharmaceutical preparations under batch and flow injection conditions with a lower detection limit of 1.26 x 10(-5) M and 5.62 x 10(-6) M at 25 +/- 1 degrees C. An average recovery of 100.91% and 100.42% with a relative standard deviation of 0.72% and 0.53% has been achieved.     

Energy-dispersive and x-ray photoelectron spectroscopy and electron microscopy of new quininium-plastic membrane electrodes

New quininium (Qn) plastic membrane electrodes of the conventional type were constructed and characterized. They are based on incorporation of Qn-reineckate (QnRn) ion-pair, Qn-phosphotungstate (Qn3-PT), or Qn-phosphomolybdate (Qn3PM) ion associate into a poly(vinyl chloride) membrane. The electrodes are selective for Qn and have been successfully used for the determination of Qn2SO4 in pharmaceutical tablets. Nevertheless, they showed, as almost all other ion-selective electrodes, limited life times. Energy dispersive- (EDS) and X-ray photoelectron spectroscopy (XPS), as well as electron microscopy were applied to investigate the cause of this limitation in the life times of the electrodes. The results indicated that the electrodes lose their activity after prolonged soaking as a result of leaching of the ion exchanger from the membranes into the test solution in addition to deformation at the surface of the expired electrode.     

Coated-Wire Ion-Selective Electrodes Based on Chlorideand Cyanide Complexes of Zinc and their Application to Zinc Monitoring in the Electrogalvanizing Process

Abstract

An indirect potentiometric method based on the selective monitoring of chlorozincate (II) or cyanozincate (II) anions with a coated-wire electrode was studied. The electroactive membrane contains either the chlorozincate or the cyanozincate salt of the tricaprylylmethylammonium cation (Aliquat 336S). Both electrodes show a useful response over the concentration range from 10^?5 to 10^?1M Zn (II) in chloride or cyanide containing solutions. Interferences arise only from a few transition metals such as Cu (II), Cd (II) and Hg (II). This method can be applied to the conditions used in the electrogalvanizing process and to industrial waste management from electroplating plants.     

All-solid-state potentiometric sensors sensitive to nonionic surfactants based on ionophores containing ethoxylate units

Earlier work of potentiometric Ion-selective electrodes (ISEs) sensitive to nonionic surfactants of the polyethoxylate type is further extended. The ISEs constructed were all-solid-state sensors with plasticized PVC membranes. The sensing material was a tetraphenylborate salt of the barium complex with a polyethoxylate nonionic surfactant. As membrane component, the combinations of two polyethoxylates of the nonylphenoxy type, which differed in the number of oxyethylene units (5 or 12), and two different plasticizers, (o-nitrophenyloctyl ether and o-nitrophenylphenyl ether), were tested. The response of these electrodes to different nonionic surfactants and the interference effect of several species has been evaluated. For all the types of tested electrodes, the sensitivities shown were ca. 30.0 mV dec(-1) and the limit of detection, ca. 10(-5) M, when a nonylphenoxyde with 12 oxyethylene units was used as standard. The membrane with the best response characteristics was then applied in potentiometric titrations of this kind of surfactants in the presence of Ba(2+) ion and using tetraphenylborate as the titrant.     

Glycopyrronium-selective electrodes

Liquid-membrane and PVC-membrane glycopyrronium-selective electrodes have been developed. They are based on the ion-pair complexes of glycopyrronium with dicyclohexylnaphthalenesulphonate, di-isopentylnaphthalenesulphonate, di-isobutylnaphthalenesulphonate and tetraphenylborate. Their response is nearly Nernstian over the pH-range 4–8, and the detection limits range from 10⁻⁶M to 10⁻⁵M. For the liquid-membrane electrodes, with homologous membrane solvents, the response slopes are linearly related to the inverse of the dielectric constant of the membrane solvent, according to the formula S = C_o − C₁/ε. A similar relation exists between the slopes for both types of electrode and the dielectric constants of mixed-solvent backgrounds. The electrodes can be used in the potentiometric determination of glycopyrrolate.