Solid phase extraction and spectrophotometric determination of Au(III) with 5-(2-hydroxy-5-nitrophenylazo)thiorhodanine.

A new chromogenic reagent, 5-(2-hydroxy-5-nitrophenylazo)thiorhodanine (HNATR) was synthesized. A highly sensitive, selective and rapid method for the determination microg l(-1) level of Au(III) based on the rapid reaction of Au(III) with HNATR and the solid phase extraction of the colored complex with a reversed phase polymer-based C(18) cartridge have been developed. The HNATR reacted with Au(III) to form a red complex of a molar ratio 1:2 (Au(III) to HNATR) in the presence of 0.05 - 0.5 mol l(-1) of phosphoric acid solution and emulsifier-OP medium. This complex was enriched by the solid phase extraction with a polymer-based C(18) cartridge. The enrichment factor of 100 was achieved. The molar absorptivity of the complex is 1.37 x 10(5) l mol(-1) cm(-1) at 520 nm in the measured solution. The system obeys Beer's law in the range of 0.01 - 3 microg ml(-1). The relative standard deviation for eleven replicates sample of 0.5 microg l(-1) level is 2.18%. The detection limit, based on the three times of standard deviation is 0.02 microg l(-1) in the original sample. This method was applied to the determination of gold in water and ore with good results.     

Colour reaction of gold with 5-(4-sodium sulphonatephenylazo)-8-aminoquinoline and its analytical application

The synthesis of 5-(4-sodium sulphonatephenylazo)-8-aminoquinoline (SPAQ) is described, and a simple, rapid, selective and sensitive new spectrophotometric method for determination of gold is developed. SPAQ reacts with gold(III), and in the presence of cetyl trimethyl ammonium bromide cationic surfactant and upon making the solution alkaline, forms a blue-green 1:3 (metal:ligand) with an absorption maximum at 605 nm. Beer's law is obeyed over the concentration range 0-2 microg/ml gold. The molar absorptivity and Sandell's sensitivity of the method are 1.48 x 10(5) 1.mole(-1).cm(-1) and 0.0013 microg/cm(2), respectively. The interference of various ions has been studied and the method has been used for the determination of microamounts of gold in ores and anode slimes.     

6-Chloro-3-hydroxy-2-(5'-methylfuryl)-4H-chromene-4-one as an analytical reagent for micro determination of molybdenum(VI).

6-Chloro-3-hydroxy-2-(5'-methylfuryl)-4H-chromene-4-one (CHMFC) has been used as an analytical reagent for the spectrophotometric determination of molybdenum. Molybdenum(VI) in the presence of several cations, anions and complexing agents forms a yellow 1:2 complex with CHMFC. The complex is quantitatively extractable into 1,2-dichloroethane from 1 mol dm(-3) acetic acid medium and is stable for more than 6 h. The complex shows an absorption maximum at 438 nm with a molar absorptivity of 5.36 x 10(4) dm3 mol(-1) cm(-1) and Sandell's sensitivity equal to 0.0017 microg Mo cm(-2). The method obeys Beer's law up to 1.9 microg Mo ml(-1). The relative standard deviations are 0.2% for solutions and 0.5-1.5% for solid samples. The method is simple, selective, precise and rapid, and has been satisfactorily applied to the micro determination of molybdenum in various synthetic and standard samples.     

Interaction of nickel with 4-(2'-benzothiazolylazo) salicylic acid (BTAS) and simultaneous first-derivative spectrophotometric determination of nickel(II) and iron(III)

The solution properties of nickel complex with 4-(2'-benzo-thiazolylazo) salicylic acid (BTAS) have been studied by zero-order absorption spectrophotometry in 40% (v/v) ethanol at 20 degrees C and an ionic strength of 0.1 mol dm(-3) (KNO(3)). The equilibria that exist in solution were established and the basic characteristics of complexes formed were determined. A new direct spectrophotometric method for the determination of trace amounts of the nickel is proposed based on the formation of the Ni (BTAS) complex at pH 7.0. The absorption maximum, molar absorbtivity, and Sandell's sensitivity of 1:1 (M:L) complex are 525 nm, 0.6 x 10(4) l mol(-1) cm(-1) and 2.824 x 10(-9) microg cm(-2), respectively. The use of first-derivative spectrophotometry eliminates the interference of iron and enables the simultaneous determination of nickel and iron using BTAS. Quantitative determination of Ni(II) and Fe(III) is possible in the range (0.59-7.08) and (2.1-8.4) microg ml(-1), respectively with a relative standard deviation of 0.5%. The proposed method has been successfully applied to the simultaneous spectrophotometric determination of nickel and iron in steel alloys and aluminum alloys.     

Spectrophotometric determination of cobalt with 1-(2-pyridylazo)-2-naphthol and surfactants

A simple and highly selective spectrophotometric method for the determination of cobalt based upon the rapid reaction with PAN in the presence of surfactants and minute amounts of ammonium persulphate at pH 5.0 is described. The cobalt(III) chelate is made water-soluble by a neutral surfactant. Triton X-100, combined with sodium dodecylbenzene sulphonate (DBS). Iron(III), bismuth, tin(IV) and aluminium are masked with oxalate or citrate. Iron(II) must be absent. The other metal-PAN chelates, except that of nickel, are readily decomposed by EDTA. Up to 150 microg of nickel does not interfere. When larger amounts up to 625 microg are present, the absorbance can be corrected by measurements at two wavelengths. In a strongly acid medium (below pH 0.5) the nickel and other metal chelates are completely and instantaneously decomposed, while the cobalt(III) chelate remains unchanged. When, in place of EDTA, several ml of 6M hydrochloric acid are added after the colour development, nickel in quantities up to 1250 microg can be tolerated. A several hundredfold excess of zinc and manganese does not interfere. At 620 nm Beer's law is obeyed over the cobalt concentration range 0.4-3.2 microg/ml. The precision (95% confidence) is +/- 1.0 microg for 100 microg of cobalt. The molar absorptivity is 1.90 x 10(4) l. mole(-1) .cm(-1).     

Highly sensitive and selective spectrophotometric method for determination of trace gold in geological samples with 5-(2-hydroxy-5-nitrophenylazo)rhodanine

A excellent sensitive and selective method for spectrophotometric determination of trace gold has been developed, the method is based on the color reaction of gold(III) with new reagent 5-(2-hydroxy-5-nitrophenylazo)rhodanine (HNAR). Under optimal conditions, HNAR reacts with gold(III) to form a 1:5 orange complex, which has an maximum absorption peak at 480 nm. Maximum enhancement of the absorbance of the complex was obtained in the presence of the mixed surfactant of Triton X-100 and CTMAB; the reaction completed rapidly and the absorbance is stable for 5 h at least at 20 degrees C; 0-48 microg L(-1) Au(III) obeyed Beer's law. The apparent molar absorptivity of the complex, Sandell's sensitivity, the limit of quantification, the limit of detection and relative standard deviation were found to be 2.0x10(6) L mol(-1) cm(-1), 0.000,098,483 micro g cm(-2), 1.02 ng mL(-1), 0.35 ng mL(-1) and 1.09%, respectively. The effect of co-existing ions was studied seriously; most metal ions can be tolerated in considerable amounts. Its sensitivity and selectivity are remarkably superior to other reagents in the literature. The proposed method was used successfully to determine trace gold in geological samples. Moreover, the synthesis, characteristics and analytical reaction of HNAR with gold are also described in detail.     

Spectrofluorimetric determination of Er (III) with diantipyrylmethane

The optimum fluorescence conditions for erbium (III) are obtained by irradiating this lanthanide at 435 nm in 0.04 microg ml(-1) diantipyrylmethane solution at pH = 8 (lambdaem = 510 nm). The method proposed is satisfactory for the determination of erbium (III) in the range of 0.001 to 1 microg ml(-1). The relative standard deviation 0.02 microg ml(-1) Er (III) in 0.04 microg ml(-1) diantipyrylmethane solution is 1.1%. The effect of other rare earths upon the intensity of the fluorescence emitted by erbium (III) is discussed.     

A highly selective spectrophotometric determination of niobium (V) using 3-hydroxy-2-[1'-phenyl-3'-(p-chlorophenyl)-4'-pyrazolyl]-4-oxo-4H-1-benzopyran as a complexing agent

3-Hydroxy-2-[1'-phenyl-3'-(p-chlorophenyl)-4'-pyrazolyl]-4-oxo-4H-1benzopyran (HPCPB) is used as an analytical reagent for the spectrophotometric determination of niobium in trace amounts with which it forms a yellow coloured complex (4:1) in perchloric acid medium. The complex is extractable into chloroform and shows absorption maximum at 407-418 nm with a molar absorptivity of 2.79 x 10(4) L mol(-1) cm(-1) and Sandell's sensitivity equal to 0.0033 microg Nb(V) cm(-2), respectively. Beer's law holds good in the range 0-1.2 microg Nb ml(-1), with a standard deviation of +/- 0.0015 absorbance units. The method is free from the interference of a large number of elements and handles satisfactorily the analysis of various samples of varying complexity.     

H-point standard addition method for simultaneous spectrophotometric determination of Co(II) and Ni(II) by 1-(2-pyridylazo)2-naphthol in micellar media

A very simple and selective spectrophotometric method for simultaneous determination of Co(II) and Ni(II) by 1-(2-pyridylazo) 2-naphthol (PAN), in micellar media, using H-point standard addition method (HPSAM) is described. The ligand and its metal complexes (Co(II)-PAN and Ni(II)-PAN) were made water-soluble by the neutral surfactant Triton X-100, and therefore, no extraction with organic solvents was required. Formation of both the complexes was complete within 10 min at pH 9 (adjusted by ammonia buffer). The linear range was 0.10-2.00 microg ml(-1) for Co(II) and 0.05-1.50 microg ml(-1) for Ni(II). The relative standard deviation (R.S.D.) for the simultaneous determination of 0.50 microg ml(-1) each of Co(II) and Ni(II) was 2.32 and 3.13%, respectively. Interference effects of common anions and cations were studied and the method was applied to simultaneous determination of Co(II) and Ni(II) in alloy samples. The method was compared with derivative spectrophotometric method.     

Solid-liquid extraction and preconcentration of trace nickel using 2-nitroso-1-naphthol-4-sulfonic acid (Nitroso-S) and TDBA onto benzophenone and determination by atomic absorption spectrometry.

Nickel was quantitatively retained by 2-nitroso-1-naphthol-4-sulfonic acid (Nitroso-S) and tetradecyldimethylbenzylammonium chloride (TDBA Cl) onto benzophenone in the pH range 5.0-6.0 from large volumes of aqueous solutions of various samples. After filtration, each solid mass consisting of a nickel complex and benzophenone was dissolved with 5 ml of dimethylformamide (DMF) and the metal was determined by atomic absorption spectrometry (AAS). About 0.6 microg of nickel could be concentrated from 200 ml of an aqueous sample, where its concentration was as low as 3.0 ng/ml. Eight replicate determinations of 2.5 microg/ml of nickel in the final DMF solution gave a mean absorbance of 0.112 with a relative standard deviation of 1.9%. The sensitivity for 1% absorption was 98 ng/ml. The interference of a number of anions and cations was studied and the developed optimized conditions were utilized for the trace determination of nickel in various alloys and biological samples.     

Extraction of gold(III) with (RS)-1-(4-chlorophenyl)-4,4-dimethyl-3-(1H-1,2,4-triazol-1-yl-methyl)-pentan-3-ol from hydrochloric acid solutions

Extraction of gold(III) with (RS)-1-(4-chlorophenyl)-4,4-dimethyl-3-(1H-1,2,4-triazol-1-ylmethyl)-pentan-3-ol from 3 M hydrochloric acid solutions (with chloroform as a diluent) has been studied. Optimal extraction conditions have been found. The reagent has been shown to extract efficiently metal ion from solutions containing 3 M hydrochloric acid due to formation of coordination bond between gold(III) and the N4 atom of the triazole ring. The coordination mechanism of gold(III) extraction has been proposed on the basis of the data obtained. Concentration constants of extraction have been calculated, and the thermodynamic parameters of extraction have been determined.     

Extraction spectrophotometric determination of maneb with 1-(2'-pyridylazo)-2-naphthol (PAN)

A rapid, sensitive, simple and selective spectrophotometric method has been developed for the determination of micro-quantities of maneb (manganese ethylenebisdithiocarbamate) after extraction of the manganese-PAN complex in isobutyl methyl ketone (MIBK). The complex absorbs strongly at 550 nm. Beer's law is obeyed over the concentration range 0.37-3.75 microg/ml. The molar absorptivity was found to be 4.1 x 10(4) l. mole(-1) . cm(-1). The developed method has been applied to the determination of maneb in commercial formulations, synthetic mixtures, grain and in the presence of various other dithiocarbamates.     

Synergistic liquid-liquid extractive spectrophotometric determination of gold(III) using 1-(2′,4′-dinitro aminophenyl)-4,4,6-trimethyl-1,4-dihydropyrimidine-2-thiol

Synergistic liquid-liquid extractive spectrophotometric determination of gold(III) using 1-(2′,4′-dinitro aminophenyl)-4,4,6-trimethyl-1,4-dihydro pyrimidine-2-thiol [2′,4′-dinitro APTPT] has been described. Equal volumes (5 cm³) of the 2′,4′-dinitro APTPT (0.02 mol L⁻¹) in the presence of pyridine (0.5 mol L⁻¹) form an orange-red coloured ternary complex with gold(III) of molar ratio 1:1:1 at pH 1.8-2.4 with 5 min of shaking. The absorbance of coloured organic layer in 1,2-dichloroethane is measured spectrophotometrically at 445 nm against reagent blank. A pronounced synergism has been observed by the binary mixture of 2′,4′-dinitro APTPT and pyridine, which shows that the enhancement in the absorbance is observed in the presence of pyridine by the adduct formation in the organic phase. Beer's law was obeyed in the concentration range 2.5-20.0 μg mL⁻¹, with molar absorptivity and Sandell's sensitivity values of 8.7 × 10³ dm³ mol⁻¹ cm⁻¹ and 0.023 μg cm⁻² respectively. A repetition of the method was checked by finding relative standard deviation (R.S.D.) (n = 10) which was 0.17%. The composition of the gold(III)-2′,4′-dinitro APTPT-pyridine adduct was established by slope analysis, molar ratio and Job's method. The ternary complex was stable for more than 48 h. The influence of various factors such as pH, 2′,4′-dinitro APTPT concentration, solvent and pyridine on the degree of complexation has been established. A number of foreign ions tested for their interferences and use of suitable masking agents wherever necessary are tabulated, which show that selectivity of the method has been enhanced. The method is successfully employed for the determination of gold(III) in binary, synthetic mixtures and ayurvedic samples. The reliability of the method is assured by inter-comparison of experimental values, using an atomic absorption spectrometer.     

The separation of gold by selective extraction of HAuBr(4) using a poly(tetramethylene) ether glycol impregnated filter

The separation of gold(III) by selective extraction on an organic- impregnated filter (OIF) was studied. Gold was found to be rapidly extracted into the active polytetramethylene ether glycol (polyTHF) layer of the filter from strongly acidic solutions of HBr, as the HAuBr(4) complex. Quantitative extraction of gold from solution was obtained with flow rates up to 600 ml min(-1) through the 10.75 cm(2) OIF and at ng ml(-1) concentration levels. The extraction is shown to be dependent on the solution flow rate and HBr concentration as well as the filter pore size, thickness and porosity. Gold can be eluted from the filter by converting it into the AuBr(4)(-) complex using a KBr solution. The separation of gold is demonstrated from simple binary metal mixtures involving iron and cadmium, as well as from a more complicated matrix, gold ore solution.     

Extractive spectrophotometric determination of tungsten(VI) using 3-hydroxy-2-(2'-thienyl)-4-oxo-4H-1-benzopyran

A simple, rapid, highly sensitive and selective spectrophotometric method for the determination of tungsten(VI) in trace amounts is developed using 3-hydroxy-2-(2'-thienyl)-4-oxo-4H-1-benzopyran (HTB) as a reagent for the complexation of metal ion and extracting the 1:2 (metal:ligand) complex into dichloromethane from 0.2 M HCl solution. It obeys Beer's law in the range 0-2.8 microg Wml(-1) with molar absorptivity and Sandell's sensitivity at 415 nm as 6.45 x 10(4) L mol(-1) cm(-1) and 0.0029 microg W(VI) cm(-2), respectively. The method is free from the interference of a large number (39) of elements and handles satisfactorily the analysis of various samples of varying complexity.     

Preconcentration of 1-(2-pyridylazo)-2-naphthol-iron(III)-capriquat on a membrane filter, and third-derivative spectrophotometric determination of iron(III)

Iron(III) was preconcentrated by collection on an organic solvent-soluble membrane filter (nitrocellulose (NC)) of the iron(III)-1-(2-pyridylazo)-2-naphthol (PAN) complex in the presence of capriquat as an oily quaternary ammonium salt. Third-derivative spectrophotometry was used for measurement of the third-derivative distance (d(3)A/dlambda(3)) between lambda(1) = 520 nm and lambda(2) = 590 nm or lambda(3) = 660 nm and lambda(4) = 724 nm of the iron(III)-PAN-capriquat complex or PAN-capriquat in dimethylsulfoxide (DMSO) following preconcentration. The calibration curve was linear in the range of 1-10 mug iron(III)/5.0 ml DMSO solution. The proposed method was about five-fold more sensitive and more selective than using zero-order spectrophotometry.     

Sensitive spectrofluorimetric determination of ruthenium at nanotrace levels using 2-(alpha-pyridyl) thioquinaldinamide [PTQA

A new spectrofluorimetric method for the determination of ruthenium with nonfluorescent 2-(alpha-pyridyl) thioquinaldinamide (PTQA) is described. The oxidative reaction of Ru(III) upon PTQA gives oxidised fluorescent product (lambda(ex(max))=347 nm; lambda(em(max))=486 nm). The sensitivity of the fluorescence reaction between ruthenium and PTQA is greatly increased in the presence of Fe (III). The reaction is carried out in the acidity range 0.01-0.075 M H(2)SO(4). The influence of reaction variables is discussed. The range of linearity is 1-400 microg l(-1) Ru(III). The standard deviation and relative standard deviation of the developed method are +/-1.210 microg l(-1) Ru (III) and 2.4%, respectively (for 11 replicate determinations of 50 microg l(-1) Ru (III)). The effect of interferences from other metal ions, anions and complexing agents was studied; the masking action is discussed. The developed method has been successfully tested over synthetic mixtures of various base metals and platinum group metals, synthetic mixtures corresponding to osmiridium, certified reference materials in spiked conditions and rock samples.     

Complexation equilibria between niobium(V) and 4-(4'H-1',2',4'-triazolyl-3'-azo)-2-methylresorcinol Extraction-spectrophotometric determination of niobium in pyrochlore-bearing rocks

The complexation equilibria between niobium(V) and 4-(1'H-1',2',4'-triazolyl-3'-azo)-2-methylresorcinol has been studied by spectrophotometric methods and graphical and numerical calculation methods. The 1:2 Nb:R complex species formed at pH 6.2 ( = 2.16 x 10(4) l.mole(-1).cm(-1) at 490 nm) allows the determination of 0.15-2.50 ppm Nb. A 1:1 Nb:R complex species can be extracted into n-butanol from 0.1-1.5M hydrochloric acid ( = 1.28 x 10(4) l.mole(-1) .cm(-1) at 510 nm) and Beer's law is obeyed over the range 0.77-4.64 ppm Nb. Interferences and their elimination have been studied and the methods applied to the determination of niobium in pyrochlore-bearing ores.     

Spectrophotometric determination of osmium with 1-phenyl-4,4,6-trimethyl-(1H,4H)-2-pyrimidinethiol and extraction into molten naphthalene

Conditions have been developed for the spectrophotometric determination of osmium with 1-phenyl-4,4,6-trimethyl-(1H,4H)-2-pyrimidinethiol after extraction of the complex into molten naphthalene. Beer's law holds for the concentration range of 4-77 mug of osmium in 10 ml of the final solution. The molar absorptivity is 1.33 x 10(4) l.mole(-1).cm(-1). The reagent is highly selective for osmium.     

Solid phase extraction and spectrophotometric determination of silver with 2-(2-quinolylazo)-5-diethylaminophenol as chromogenic reagent.

A new chromogenic reagent, 2-(2-quinolylazo)-5-diethylaminophenol (QADEAP), was synthesized. A sensitive, selective and rapid method has been developed for the determination of microg/L level silver ion based on the rapid reaction of silver(l) with QADEAP and the solid phase extraction of the colored chelate with C18 cartridge. The QADEAP reacts with Ag(l) to form a violet chelate of a molar ratio 1:2 (silver to QADEAP) in pH 3.5-8.0. This chelate was prconcentrated by solid phase extraction with C18 cartridge. An enrichment factor of 100 was achieved. The molar absorptivity of the chelate is 1.30 x 10(5) L mol(-1) cm(-1) at 590 nm in measured solution. Beer's law is obeyed in the range of 0.01-0.6 microg/ml. The relative standard deviation for eleven replicate samples of 0.01 microg/ml is 1.15%. The detection limit is 0.02 microg/L in the original samples. This method was applied to the determination of microg/L level silver ion in water with good results.