Influence and role of metal ions in enzymatic catalysis with e.c. 1.2.3.2. xanthine oxidase Application to trace analysis

The effect of metal ions on the reductive half-reaction of xanthine oxidase (XOD) in the catalytic conversion of xanthine into uric acid has been studied spectrophotometrically in Tris-HCl buffer at pH 7.4, 37 +/- 0.1 degrees and ionic strength 0.04M. Some metal ions display inhibitor properties, the sequence of inhibiting efficiency being Ag(I) > Hg(II) > Cu(II) > Cr(VI) > V(V) > Au(III) > Tl(I) and for these the I(50) values were determined. Only Tl(I), V(V) and Cu(II) showed reversible inhibition and therefore for these the mechanisms were assessed [competitive for V(V) and Tl(I); uncompetitive for Cu(II)]. The conditional inhibition constants (K(i)) were also determined. The effect of EDTA for protection of the enzyme against metal inhibition, and for its reactivation after inhibition, was also investigated. Utilization of the linear relationship between relative enzyme activity and inhibitor concentration allowed sensitive and selective (though not specific) determination of Ag(I) and Hg(II) (10(-9)-10(-8)M), and of Cu(II) and Cr(VI) (10(-7)-10(-6)M), the maximum relative error being +/- 4%. For a few metal ions, e.g., Ag(I) and Cr(VI), in the presence of EDTA, a certain specificity is observed.     

Potentiometric titration of Bi, Cu, Cr and V with ferrous sulphate solution in alkaline glycerol medium

Summary A potentiometric method is described for the determination of Bi(III), Cu(II), V(V) and Cr(VI) in alkaline glycerol medium by ferrous sulphate solution. Errors are below ±1.5%. Furthermore, the Fe(II)-glycerol complex is used for the detection of Ag(I), Au(III), Bi(III), Cn(II), Hg(II) and Pd(II).

---

Zusammenfassung Ein Verfahren zur potentiometrischen Bestimmung von Bi(III), Cu(II), V(V) und Cr(VI) in alkalischer Glycerinlösung mit Fe(II)-Lösung wird mitgeteilt. Die Fehler liegen unter ± 1,5%. Au\erdem wird eine Nachweismethode für Ag(I), Au(III), Bi(III), Cu(II), Hg(II) und Pd(II) beschrieben, die ebenfalls auf der Reduktion mit Hilfe des Fe(II)-Glycerinkomplexes beruht.

     

Synthesis and characterization of silica gel microspheres encapsulated by salicyclic acid functionalized polystyrene and its adsorption of transition metal ions from aqueous solutions

The present study was undertaken to develop a novel adsorbent for heavy metal ions, and this paper presents the synthesis and characterization of a composite material-silica gel microspheres encapsulated by salicyclic acid functionalized polystyrene (SG-PS-azo-SA) with a core-shell structure. SG-PS-azo-SA was used to investigate the adsorption of Mn(II), Co(II), Ni(II), Fe(III), Hg(II), Zn(II), Cd(II), Cr(VI), Pd(II), Cu(II), Ag(I), and Au(III) from aqueous solutions. The results revealed that SG-PS-azo-SA has better adsorption capacity for Cu(II), Ag(I) and Au(III). Langmuir and Freundlich isotherm models were applied to analyze the experimental data, the best interpretation for the experimental data was given by the Langmuir isotherm equation with the maximum adsorption capacity for Cu(II), Ag(I), and Au(III) at 1.288 mmol g⁻¹, 1.850 mmol g⁻¹ and 1.613 mmol g^t-1, respectively. Thus, silica gel encapsulated by salicyclic acid functionalized polystyrene (SG-PS-azo-SA) is favorable and useful for the removal of Cu(II), Ag(I) and Au(III) metal ions.     

Indirect cerimetric determination of gold at the milligram level

Summary A rapid volumetric method has been worked out for the indirect determination of 0.25–2.5 mg of gold in presence of many common ions. It is based on the reduction of gold(III) to metal with excess of cobalt(II) in the presence of 1,10-phenanthroline at pH 3 and 50°, and estimation of the unreacted cobalt(II) in the filtrate by visual, potentiometric or biamperometric titration with standardized cerium(IV) sulphate solution. It has been found that there is no interference from Ni(II), Pb(II), Zn(II), Cd(II), Mn(II), Mg(II), Ca(II), Al(III), Cr(III), Ti(IV), V(V) and W(VI). Interference due to Pd(II) and Ag(I) can be eliminated. Fe(III), Cu(II), Mo(VI), Hg(II) and Pt(IV) interfere, even present in small amounts.

---

Zusammenfassung Ein schnelles maßanalytisches Verfahren zur indirekten Bestimmung von 0,25–2,5 mg Gold in Gegenwart vieler Ionen wurde ausgearbeitet. Es beruht auf der Reduktion zu metallischem Gold mit überschüssigem Kobalt(II) in Anwesenheit von 1,10-Phenanthrolin bei pH 3 und 50°. Die Rückbestimmung des unverbrauchten Kobalts im Filtrat erfolgt durch potentiometrische oder biamperometrische Titration mit Cer(IV)sulfat. Ni(II), Pb(II), Zn(II), Cd(II), Mn(II), Mg(II), Ca(II), Al(II), Cr(III), Ti(IV), V(V) und W(VI) stören nicht. Eine Störung durch Pd(II) oder Ag(I) kann man ausschalten. Fe(III), Cu(II), Mo(VI), Hg(II) und Pt(IV) stören auch in geringen Mengen.

     

以硫醚为主链的螯合树脂研究——Ⅲ.含硫氰酸根树脂的合成及吸附性能

环硫氯丙烷的均聚物或环硫氯丙烷与环氧氯丙烷的共聚物,在少量二乙烯三胺存在下制得预交联聚合物,将后者与硫氰化钾反应,制得两种侧链带有硫氰酸根的新型螯合树脂。它们对贵金属具有优良的吸附性能和高的吸附选择性。通过X射线光电予能谱初步探讨了树脂对金属离子的螯合作用     

Chloroform extraction of ethyl xanthate complexes from sulphuric acid media

The chloroform extraction of 30 elements (Fe, Co, Ni, Zn, Cd, Ge, Sn, V, As, Sb, Bi, Cu, Ag, Au, Mn, Re, Ga, In, Tl, Se, Te, Cr, Mo, U, Pt, Pd, Rh, Ir, Ru and Ce) from 0.1-8M sulphuric acid in the presence of potassium ethyl xanthate has been studied. Pd(II), Bi, As(III), Sb(III), Se(IV) and Te(IV) are completely extracted and Au(III) is largely extracted over the range of acid concentration investigated. Fe(II), Tl(I), Rh(III) and Cr(VI) are only slightly extracted and Se(VI), Te(VI), Ru(III), Cr(III), Mn(II), Zn, Ce(IV), Ir(IV) and Ge(IV) are not extracted at all. Depending on the acid concentration, the remaining elements are all partly extracted. Results are compared with those obtained in an earlier study of the extraction of xanthate complexes from hydrochloric acid media. The processes involved in the formation of some xanthate complexes and potential analytical separations are discussed.     

Metal-based anti-diabetic drugs: advances and challenges

The current status and likely future directions of complexes of V(V/IV), Cr(III), Mo(VI), W(VI), Zn(II), Cu(II), and Mn(III) as potential oral drugs against type 2 diabetes are reviewed. We propose a unified model of extra- and intracellular mechanisms of anti-diabetic efficacies of V(V/IV), Mo(VI), W(VI), and Cr(III), centred on high-oxidation-state oxido/peroxido species that inhibit protein tyrosine phosphatases (PTPs) involved in insulin signalling. The postulated oxidative mechanism of anti-diabetic activity of Cr(III) via carcinogenic Cr(VI/V) (which adds to safety concerns) is consistent with recent clinical trials on Cr(III) picolinate, where activity was apparent only in patients with poorly controlled diabetes (high oxidative stress), and the correlation between the anti-diabetic activities and ease of oxidation of Cr(III) supplements and their metabolites in vivo. Zn(II) and Cu(II) anti-diabetics act via different mechanisms and are unlikely to be used as specific anti-diabetics due to their diverse and unpredictable biological activities. Hence, future research directions are likely to centre on enhancing the bioavailability and selectivity of V(V/IV), Mo(VI), or W(VI) drugs. The strategy of potentiating circulating insulin with metal ions has distinct therapeutic advantages over interventions that stimulate the release of more insulin, or use insulin mimetics, because of many adverse side-effects of increased levels of insulin, including increased risks of cancer and cardiovascular diseases.     

Chloroform extraction of metal ethyl xanthates from hydrochloric acid media

The chloroform extraction of 32 elements (Fe, Co, Ni, Zn, Cd, Ge, Sn, Pb, V, As, Sb, Bi, Cu, Ag, Au, Mn, Re, Ga, In, Tl, Ce, Se, Te, Cr, Mo, U, Pt, Pd, Rh, Ir, Ru and Os) from O.1-10M hydrochloric acid media in the presence of potassium ethyl xanthate has been studied. The oxidation states in which some elements react, and potential analytical separations, are discussed. Pd(II), As(III) and Se(IV) are completely extracted as ethyl xanthate complexes, Te(IV) is almost completely extracted, and Au(III) is largely extracted over the range of acid concentration investigated. Mn(II), Zn, Rh(III), Ir(IV), Ru(III), Os(IV), Cr(III), Cr(VI), Ce(III) and Ce(IV) are not extracted. Ge is partly extracted from 6-10M media as the chloro-complex. Depending on the acid concentration, the remaining elements are all partially extracted as xanthate complexes.     

Luminol-K2S2O8体系中金属离子化学发光行为的研究

报导了在自行设计的流动注射式化学发光分析仪上,对Luminal-K2S2O8体系中32种金属离子的化学发光行为的系统研究.确定了对金属离子的最优测定条件以及大多数金属离子的检出极限和线性范围.     

Oximidobenzotetronic acid as a reagent for the separation and gravimetric determination of palladium and cobalt

Oximidobenzotetronic acid is recommended for the separation and gravimetric determination of palladium and cobalt An ethanolic solution of the reagent quantitatively precipitates palladium(II) from solutions which are 0.75 N in acid up to pH 5.1, the complex is weighed as Pd(C₉H₅NO₄)₂. Cobalt(II) can be determined in the filtrate after the precipitation of palladium. With 0.5 N acid solutions, no interference was found from Pt(IV), Ir(IV), Rh(III), Ru(III), Os(IV), Au(III), Ag(I), Cu(II), Fe(III), Ni(II), Hg(II). Pb(II), Bi(III), Cd(II), As(V), Se(VI), Te(IV), Mo(VI), Sb(III), Al(III), Cr(III), Zn(II), Ti(IV), Zr(IV). acetate, oxalate, citrate, tartrate, phosphate and fluoride.     

以硫醚为主链的螯合树脂研究Ⅳ．含硫代硫酸根、叠氮基树脂的合成及吸附性能

聚环硫氯丙烷或环硫氯丙烷与环氧氯丙烷共聚物，在少量二乙烯三胺存在下制得交联预聚物，将交联预聚物分别与硫代硫酸钠，叠氮化钠反应，制得四种侧链带有硫代硫酸根或叠氮基的新型螯合树脂。它们对贵金属离子具有较高的吸附容量和较好的吸附选择性。     

Extraction of molybdenum(V) as its ferron complex with trioctylamine in chloroform from a sulphuric acid medium

A simple, rapid, and highly selective method for the separation of molybdenum from a large number of elements of analytical importance has been developed. The method is based on the extraction of a Mo(V)-ferron (7-iodo-8-hydroxyquinoline-5-sulphonic acid) complex into trioctylamine-chloroform in a sulphuric acid medium using ascorbic acid as a reductant. Many elements such as Re(VII), W(VI), U(VI), Th(IV), Cr(III), Cr(VI), V(V), Ce(IV), Ru(III), Co(II), Ni(II), Mn(II), Fe(II), Fe(III), Cd(II), Mg(II), Cu(II), Al(III), Zn(II), Pb(II), Ag(I), and As(V) are not extracted under the conditions proposed and, thus, molybdenum can be easily separated without any interference. Sulphate, chloride, nitrate, phosphate, and oxalate anions have no effect on the extraction of molybdenum. However, zirconium and palladium interfere seriously. The ratio of Mo: ferron: TOA in the extracted species is found to be 1: 1: 3 using Job’s method of continuous variations. This value has been further confirmed by the mole-ratio method. The text was submitted by the authors in English.     

Extraction and separation of mercury(II) using triisobutyl phosphine sulfide (TIBPS/Cyanex) as an extractant and its application to industrial effluent

Studies have been carried out on the extraction of Hg(II) along with Cr(III), Fe(III), Mn(II), Co(II), Ni(II), Cu(II), Zn(II), Cd(II), Pb(II) and Ag(I), from mineral acid media using TIBPS. The effect of different variables influencing extraction of Hg(II), such as, mineral acid used, nature of diluent, concentration of metal ion and extractant has been investigated. Based on the partition data some binary separations from Hg(II) have been achieved. The potential of the extractant for decontaminating Hg from paper industry effluent has been assessed.     

Adsorption of metal ions on activated carbon from aqueous solutions at pH 1-13

Adsorption of microgram amounts of 20 metal species on activated carbon powder from aqueous solutions of pH 1-13 was investigated. The species examined were Cs(I), Y(III), Ce(III), Ti(IV), Zr(IV), Cr(III), Cr(VI), Mn(II), Fe(III), Co(II), Ni(II), Ru(III), Cu(II), Ag(I), Zn(II), Cd(II), Al(III), Pb(II), Sb(III) and Bi(III).     

Liquid — Liquid extraction of silver(I) by diphenyl-2-pyridylmethane in benzene from aqueous mineral acid — Thiocyanate solutions

Liquid — liquid extraction of Ag(I) by diphenyl-2-pyridylmethane (DPPM) in benzene from aqueous nitric and sulfuric acid solutions containing thiocyanate ions has been studied at ambient temperature (24±2 °C). The metal is extracted quantitatively from 0.01M HNO₃+0.02M KSCN; or 0.25M H₂SO₄+0.02M KSCN by 0.1M DPPM (optimum extraction conditions). Slope analysis indicates that two types of ion-pair complexes i.e. [(DPPMH)⁺·Ag(SCN) ₂ ^– ] and [(DPPMH) ₂ ⁺ ·Ag(SCN) ₃ ^2– ] are involved in the extraction process. Separation factors determined at optimum conditions reveal the separation of Ag(I) from Cs(I), Br(I), Mn(II), Co(II), Ni(II), Cu(II), Zn(II), Cd(II), Fe(III), Au(III) (from HNO₃ solution only), Cr(III), Hf(IV), Ta(V), Sn(IV) and Cr(VI). With the exception of thiosulfate, other complexing anions like ascorbate, acetate, citrate, oxalate do not hinder the extraction of Ag(I) under optimum conditions.     

Chromatographic separation by a new chelating resin containing β-hydroxydithiocinnamic acid

Summary The distribution coefficients of Ag(I), Au(III), Cd(II), Cu(II), Fe(III), Hg(II), Ni(II), Pb(II), Pt(IV), and Zn(II) on a new chelating resin containing -hydroxydithiocinnamic acid at various acidity were studied. In the strongly acidic region, the resin shows high affinity for Ag(I), Hg(II), Au(III) and Pt(IV) and high resistance against air oxidation. The effect of diverse foreign ligands on the sorption of metal ions and the possibility of application to speciation studies with this resin were also considered. Some quantitative separations of Cd-Cu-Pb, Cu-Au and Au-Pt with this resin column were described. Detection of the chromatography system was carried out via post column derivatisation of the column effluent with PAR at 520 nm or direct UV detection of the chloride complexes at 215 nm.     

Thermogravimetric analysis of some metal thiocarbonates and sulphides obtained with potassium thiocarbonate (PTC) reagent

The thiocarbonates of K(I), Tl(I), Pb(II), Cd(II), Cu(II), Co(II), Ni(II), Zn(II), Fe(II) and the sulphides of Ag(I), Cu(II), Cd(II), Hg(II), Bi(III), Mo(VI), Pt(IV), Au(III), V(V), Se(IV), Te(IV), As(III, V), Sb(III) have been studied by thermogravimetric analysis. These studies not only confirm the purity of the precipitated products obtained with PTC but also determine correct temperature ranges for the precipitates to attain constant weight, thereby affording gravimetric evaluations of even mg quantities of the metal ions studied. Purity of precipitated products was made possible with the technique of precipitation from homogeneous solution based on the PTC reagent as precipitant.     

A fast and precise heterometric determination of thallium(I) with sodium tetraphenylborate

The heterometric titration of thallium(I) with sodium tetraphenylborate, at various pH values and in the presence of salts and different complexing agents, was studied; 1.5–0.75 mg of thallium(I) could be determined within 3–4 min, and the error was negligible. Of the complexing agents studied, sodium pyro- and tripolyphosphate had a specific influence, raising the sensitivity about 4-fold, and no interference was caused by the presence of 30–130-fold molar excesses of the following metals: Ca, Mg, Zn, Mn, Co, Ni, Fe(III), Al, UO₂(II), Cd, Cu(II), Pb, Bi(III), Ag, V(V), Mo(VI) W(VI) and Th. Pd, Au(III) and Pt(IV) did not interfere.     

Studies on the synthesis of 5-(p-aminobenzylidene)-rhodanine and its properties

A new analytical reagent 5-(p-aminobenzylidene)-rhodanine (ABR) was synthesized. The acidic dissociation constant of ABR has been determined. The properties, the acid-base behavior of ABR and the reactions of ABR with metallic ions have been studied. The color reactions of the reagent with Pd(II), Au(III), Ag(I), Ru(III), Hg(II) and Cu(II) are studied in detail. The composition of Pd(II)-ABR, Au(III)-ABR and Ag(I)-ABR complexes were discussed.