Simultaneous determination of aluminium and beryllium by first-derivative synchronous solid-phase spectrofluorimetry

A method for the simultaneous determination of aluminium and beryllium in mixtures by first-deravative synchronous solid-phase spectrofluorimetry has been developed. Aluminium and beryllium reacted with morin to give fluorescent complexes, which were fixed on a dextran-type resin. The fluoresnce of the resin, packed in a 1-mm silica cell, was measured directly with a solid-surface attachment. The constant wavelength difference chosen to optimize the determination was Deltalambda = lambda(em) = 75 nm. Aluminium was measured at lambda(em)lambda = 445/520 nm and beryllium at lambda(em)lambda(em) = 430/505 nm. The range of application is between 0.5 and 5.0 ng/ml for both aluminium and beryllium. The accuracy and precision of the method are reported. The method has been successfully applied to the determination of aluminium and beryllium in synthetic mixtures and natural waters.     

3-Hydroxypyridine-2-aldehyde 2-pyridylhydrazone as an analytical reagent: Fluorimetric Determination of Aluminium in Natural Waters

The properties of 3-hydroxypyridine-2-aldehyde 2-pyridylhydrazone as a spectrophotometric and fluorimetric reagent are described. The four ionization constants are reported. A rapid procedure for the fluorimetric determination of 2—300 ppb(7.2 × 10^-81.1 × 10^-5 M) of aluminium in acetate-buffered medium is described (λ_ex = 390 nm, λ_em = 475 nm). Interferences have been evaluated, and the procedure has been applied satisfactorily to the determination of aluminium in potable, fresh and sea waters.     

Fluorimetric determination traces of aluminium in soil extracts

Salicylaldehyde picolinoylhydrazone (SAPH) form a fluorescent complex with aluminium (lambda(ex) = 384 nm, lambda(em) = 468 nm) in acidic medium (stoichiometry 1:3, Al:SAPH). Two procedures based on the direct or standard additions methods has been proposed for the determination of concentrations down to 1-2 mug/dm(3) of Al(III). The effects of 72 ions in the method has been evaluated and different masking agent reactions have been tested. The method has been used satisfactorily for the determination of aluminium at a level of mug/dm(3) in acetate extracts of several agricultural soils. The method has been compared favourably with ICP spectroscopy emission.     

Spectrophotometric determination of cobalt(II) with 2-[di-(2-pyridyl)-methylidenehydrazino]quinoline

A simple, rapid and selective procedure for spectrophotometric determination of cobalt has been developed. Cobalt(II) forms two water-soluble complexes with 2-[di-(2-pyridyl)methylidenehydrazino]quinoline, an orange-yellow complex (lambda(max) 510 nm) in the pH range 2-12 and a pink complex (lambda(max) 530 nm) in 0.1-6M perchloric acid medium. The molar absorptivities for the orange-yellow and pink complexes are 3.65 x 10(4) and 4.1 x 10(4) 1.mole(-1).cm(-1) and Beer's law is obeyed up to 1.84 and 2.0 ppm of cobalt(II) respectively. Cobalt(II) has also been determined in alloys.     

Sensitive spectrophotometric determination of traces of zirconium with 2-(6-bromo-2-benzothiazolylazo)-5-diethylaminophenol in the presence of sodium lauryl sulphate

A simple and highly sensitive procedure for spectrophotometric determination of zirconium has been developed. At pH 4.6, zirconium reacts with 2-(6-bromo-2-benzothiazolylazo)-5-diethylaminophenol in the presence of sodium lauryl sulphate to form a red-violet complex, which has an absorption maximum at 520 nm. The molar absorptivity at 520 nm is 4.4 × 10⁵ 1.mole⁻¹ .cm⁻¹. Beer's law is obeyed for 0.25–1.50 μg of zirconium in 25 ml of solution. The method has been used in the determination of zirconium in aluminium alloy and steel samples.     

High performance liquid chromatographic determination of aluminium in natural waters in the form of its lumogallion chelate

A high performance liquid chromatographic method for the determination of ultra trace amount of aluminium in natural waters has been developed using lumogallion as a precolumn reagent for fluorimetric detection. The highly fluorescent Al-lumogallion chelate (lambda(ex) 500 nm, lambda(em) 574 nm) was separated on a LiChrosorb RP 18 column with an eluent containing 3:7 acetonitrile/0.02M potassium hydrogen phthalate buffer (pH 4.7) containing 10(-5)M lumogallion. The proposed system provides a simple, quick, selective and sensitive method for the determination of ultra-trace amount of aluminium in water samples. The detection limit defined as three times the standard deviation of the blank signal, was 0.05 mug/l. in water samples for 100 mul injection. The tolerance limits were 5 mg/l. for Fe(III) and F(-) and over 10 mg/l. for other foreign ions. The sensitivity of the method was independent of salinity. This method had been used for the direct determination of aluminium in both tap and coastal sea-waters without any preconcentration steps.     

Spectrophotometric determination of iron with 1-hydroxy-4-sulpho-2-naphthoic acid

1-Hydroxy-4-sulpho-2-naphthoic acid (H(3)L) is proposed as a spectrophotometric reagent for determination of iron. It gives a red-brown chelate, FeL(6-)(3), with lambda(max) 500-520 nm at pH 8 ( = 3.3 x 10(3) l. mole(-1). cm(-1)). In this wavelength region the reagent has no absorption. Most common cations and oxo-anions do not interfere. In the determination of iron in polymetallic iron ores and aluminium alloys the relative error and relative standard deviation of the method were found to be better than 1 and 0.5%, respectively. 1-Hydroxy-4-sulpho-2-naphthoic acid seems to be a more sensitive and accurate reagent for iron than 5-sulphosalicylic acid, and the number of interfering ions is smaller than in the 1,10-phenanthroline or thiocyanate methods.     

Nonextractive spectrofluorimetric determination of aluminium in real, environmental and biological samples using chromotropic acid

An ultra-sensitive and highly selective nonextractive fluorimetric method is presented for the rapid determination of aluminium at nano-trace levels using chromotropic acid as a fluorimetric reagent [lambda(ex) = 360 nm and lambda(em) = 390 nm] in the pH range of 4.1-4.7. The fluorescence intensity of the metal chelate (2:3 complex) reaches a constant value within 1/2 hr and remains unchanged for over 48 hr. The fluorescence intensity aluminium concentration calibration curve is collinear between 1 and 300 ng/ml of Al. A constant fluorescence intensity is obtained over a wide range (1:50-1:1500) of Al:reagent molar concentrations. Large excesses of over 60 cations, anions and complexing agents (like tartrate, oxalate, phosphate, thio-urea, SCN(-), etc.) do not interfere in the Al determination. The developed method was successfully used in assaying aluminium in several standard reference materials (Al-bronze, brass, stainless steel) as well as in some environmental and biological samples. The method is very precise and accurate (S.D = +/-0.001 on 10 ng/ml; 11 determinations).     

Sensitive spectrophotometric determination of nickel(II) with 2-(5-bromo-2-pyridylazo)-5-diethylaminophenol

A simple, selective and highly sensitive procedure for spectrophotometric determination of nickel has been developed. At pH 5.5, nickel reacts with 2-(5-bromo-2-pyridylazo)-5-diethylaminophenol in water-ethanol medium to form a red-violet complex which has two absorption maxima, at 520 and 56Onm. The molar absorptivity at 56Onm is 1.26 x 10(5) l.mole(-1).cm(-1). Beer's law is obeyed for 0-15 mug of nickel. Nickel in aluminium alloys and electroplating waste-water has been determined by this method.     

Determination of ruthenium and osmium in each other's presence in chloride solutions by direct and third-order derivative spectrophotometry

Ruthenium and osmium (up to 20 mug Ru(Os) ml(-1)) can be determined in chloride solutions directly after absorption of RuO(4) and OsO(4) in hydrochloric acid. In 9 M HCl, RuO(4) and OsO(4) are quantitatively converted into RuCl(6)(2-) (lambda(max) = 480.0 nm, epsilon = 4.8 x 10(3) l mol(-1) cm(-1)) and OsCl(6)(2-) (lambda(max) = 334.8 nm, epsilon = 8.4 x 10(3) l mol(-1) cm(-1)) respectively. Osmium does not interfere with the determination of ruthenium in the form of the RuCl(6)(2-) complex by direct spectrophotometry. The absorbance of the obtained solution at lambda(max) = 480.0 nm corresponds only to the concentration of ruthenium. A derivative spectrophotometric method using numerical calculation of absorption spectra of the RuCl(6)(2-) and OsCl(6)(2-) complexes has been developed for the determination of osmium in a mixture with ruthenium. The interfering effect of ruthenium on the determination of osmium can be eliminated by measuring the value of a third-order derivative spectrum of the OsCl(6)(2-) complex at 350.0 nm ("zero-crossing point" of ruthenium). Simple and rapid determination of ruthenium and osmium in a calibration standard solution of the noble metals (Ru, Rh, Pd, Os, Ir, Pt and Au) for plasma spectroscopy using the proposed methods has been achieved.     

Spectrofluorimetric determination of cysteine by 5-maleimidyl-2-(m-methylphenyl)benzoxazole

A new thiol weak-fluorescence probe, 5-maleimidyl-2-(m-methylphenyl)benzoxazole (MMPB), gives a highly fluorescence product in the presence of Cys. In this paper, MMPB has been developed for the fluorimetric determination of cysteine (Cys). At lambda(ex)/lambda(em) = 305.6/425.6 nm, the linear range is from 0 to 3.3 x 10(-7) mol l(-1) and the detection limit (sigma = 3) of 6.2 x 10(-10) mol l(-1). The main advantage of this method lies in the relative high selectivity compared with the methods using other N-substituted maleimide type of thiol reagents, in which 0.15-fold (molar ratio) of GSH is allowed and most of other amino acids at 100-fold (molar ratio) level had no obvious effect on the results. The proposed method has been applied to the determination of Cys in real samples.     

Extraction and spectrophotometric determination of titanium(IV) with alizarin and fluoride

The characteristics of the mixed-ligand titanium(IV)-fluoride-alizarin complex, including the optimum conditions of formation and extraction into methyl isobutyl ketone, are described. A simple and sensitive procedure for spectrophotometric determination of titanium has been developed. At pH 9.5-10.3 titanium reacts with alizarin in the presence of fluoride to form a red-violet complex that is completely extractable into methyl isobutyl ketone, and has its absorption maximum at 513 nm. The molar absorptivity at 513 nm is 7.0 x 10(4)l.mole(-1).cm(-1). Beer's law is obeyed up to 22 mug of titanium in 30 ml of solution. The method has been used for the determination of titanium in an oxide mixture and aluminium alloy samples.     

Spectrofluorimetic determination of cysteine based on the fluorescence inhibition of Cd(II)-8-hydroxyquinoline-5-sulphonic acid complex by cysteine

A spectrofluorimetric method for the determination of cysteine at trace and ultra trace levels (0-1.82 x 10(-5) mol l(-1)) has been developed. It is based on the efficient inhibition action of cysteine on the fluorescent system of Cd(II)-8-hydroxyquinoline-5-sulphonic acid complex (Cd(II)-HQS) (lambda(ex) 364.8 nm, lambda(em) 510.4 nm) solution at pH 8.5. The method has been applied to protein hydrolysate and cystine electrolyte samples.     

Spectrophotometric study of the reaction of zinc with O-hydroxybenzenediazoaminoazobenzene and its application

A highly sensitive and selective procedure for spectrophotometric determination of zinc has been developed. At pH 10.6, in the presence of emulsifier p-octylpolyethyleneglycol phenylether (OP), zinc forms an orange-red complex with o-hydroxybenzenediazoaminoazobenzene (HDAA) which has an absorption maximum at 525 nm. The molar absorptivity is 1.50 x 10(5) 1.mole(-1).cm(-1). Beer's law is obeyed for zinc in the range 0-13 mug/25 ml. The method has been applied to the spectrophotometric determination of trace amounts of zinc in aluminium alloy and in human hair. The proposed method is simple, rapid and accurate. No heating or separation is required.     

Trace determination of zinc in standard alloys, environmental and pharmaceutical samples by fourth derivative spectrophotometry using 1-2-(thiazolylazo)-2-naphthol as reagent and ammonium tetraphenylborate supported on naphthalene as adsorbent

A highly sensitive, selective, economical and rapid method for the trace determination of zinc using fourth derivative spectrophotometry has been proposed with 1-2-(thiazolylazo)-2-naphthol (TAN) as an analytical reagent and ammonium tetraphenylborate (ATPB)-naphthalene as an adsorbent. Zn-TAN is quantitatively retained on ATPB naphthalene in the pH range 6.5-9.5. The calibration plot is linear in the concentration range 0.02-1.4 mug ml(-1) Zn of DMF solution. The sensitivity of the method as determined from the slope of the calibration plot is 2.640 (d(4)A/dlambda(4))/(mug ml(-1)). Nine replicate determinations of 5.0 mug of zinc in 5 ml of DMF give a mean signal height of 2.660 (peak to peak height between lambda(1)=597 nm and lambda(2)=585 nm) with a relative standard deviation of 1.1%. The various conditions have been optimized and the developed method has been used for the determination of zinc in standard alloys, environmental and pharmaceutical samples.     

Spectrofluorimetric method for determination of aluminium with chromotropic acid and its application to water samples

A rapid and sensitive method for the trace level determination of aluminium based on the formation of a 1:1 complex with chromotropic acid (1,8-dihydroxynaphthlene-3,6-disulfonic acid) in an methanol medium is reported. The fluorescence intensity of the system was 50 times greater than that of the system without aluminium. This method is very sensitive and selective for the direct determination of aluminium ion. The fluorescence is excited at 346 nm and measured at 370 nm. The optimum conditions are a chromotropic acid concentration of 5.0 ml (1.0x10(-4) M) and pH 4.0+/-0.5 (acetic acid-sodium acetate buffer). The fluorescence intensity is a linear function of the concentration of Al(III) in the range 2-100 ng ml(-1) and the detection limit is 1.0 ng ml(-1). The method has been applied successfully to the determination of trace amount of Al(III) in tap, river and sea-water samples.     

Improved spectrophotometric determination of uranium(VI) with 4-(2-pyridylazo)resorcinol in the presence of benzyldimethylstearyltrimethylammonium chloride

An improved spectrophotometric determination of uranium(VI) is proposed using 4-(2-pyridylazo)resorcinol(PAR) in the presence of benzyldimethylstearyltrimethylammonium chloride(BSTAC) as a cationic surfactant. The calibration graph is linear in the range of 0.3-60 microg/10 ml uranium(VI), measuring the absorbance at 550 nm. The reproducibility for 19.0 microg/10 ml uranium(VI) is 0.57%. The third-derivative method using the third-derivative distance (d(3)A/dlambda(3)) among lambda(1) 530 nm, lambda(3) 594 nm and lambda(2) 565 nm was also investigated.     

Spectrophotometric studies on the complexation equilibria of Ni and Pb with 2-carboxy-2-hydroxy-5'-sulfo-formazylbenzene. Simultaneous determination of trace amounts of Ni and Pb

Spectrophotometric studies have been made to investigate the reaction of Nickel and Lead with 2-carboxy-2'-hydroxy-5'-sulfoformazyl-benzene (zincon) in 50%(v/v) ethanol-water at 25 degrees C and an ionic strength of 0.1 M NaClO4. A complete picture of the complexation equilibria in the pH range (4.2-12.0) for nickel and (1.9-11.5) for lead are presented. Simple, rapid, selective and sensitive methods for the spectro-photometric determination of nickel and lead has been developed based on the color reaction of their complexes with zincon. The methods allow the determination of 4.69 microg mL(-1) of nickel at pH = 6.3 (lambdamax = 665 nm) and 10.3 microg ml(-1) of lead at pH = 5.6 (lambdamax = 610 nm). The apparent molar absorptivities were epsilon = 1.3 x 10(4) L mol(-1) cm(-1) for nickel and epsilon = 0.6 x 10(4) L mol(-1) cm(-1) for lead. The interference of a large number of foreign ions and complexing agents has been studied. Thiosulphate, as masking agent allows the simultaneous determination of nickel and lead in the presence of high concentrations of copper. Ascorbic acid, sodium cyanide and or sodium fluoride provide the elimination of many other interferences. The methods have been applied successfully to the simultaneous determination of nickel and lead in an aluminium and non-ferrous alloy.     

双波长分光光度法测定微量铜

报道了以５－（５－硝基－２－吡啶偶氮）－２－４－二氨基甲苯（５－ＮＯ２－ＰＡ－ＤＡＴ）为显色剂,应用双峰双波长光度法测定铜（Ｉ）的新方法。实验结果表明,在ｐＨ４．０￣ｐＨ６．０的乙酸－乙酸钠缓冲溶液中和盐酸羟胺和乙醇存在下,铜（Ｉ）可与试剂形成稳定的１：２红色配合物。     

Sensitive determination of aliphatic amines by high-performance liquid chromatography with a new fluorogenic probe 3-(4-fluorinebenzoyl)-2-quinoline carboxaldehyde

A new fluorogenic reagent 3-(4-fluorinebenzoyl)-2-quinoline carboxaldehyde (FBQCA) has been synthesized and used as a derivatizing reagent for the determination of aliphatic amines with HPLC. The reagent is nonfluorescent, but forms highly fluorescent isoindole upon the reaction with primary amines in alkaline medium. Eleven amine derivatives were baseline separated in 8 min using a gradient elution on a C(8) column and detected with fluorescence detection at lambda(ex)/lambda(em) = 480/546 nm. The detection limits were in the range of 0.5-2 nM (S/N = 3). The proposed method has been successfully applied to the analysis of aliphatic amines in food and environmental samples, including white wine, soybean oil, soil, and tap water with satisfactory recoveries in the range of 94-106%.