Influence of the type of foam films and the type of surfactant on foam stability

The behaviour and the life time ( _p) of different types of foam films (thin liquid films, for which DLVO-theory is valid; common black films, Newton black films) have been studied as a function of external pressure (P), applied in the Plateau-Gibbs-borders of the foam. The foam stability and the course of thep/P-dependence are determined mainly by the type of the foam films. A criterion for estimation of foam stability is proposed on the base of the obtained experimental results.     

The thickness and contact angle of sodium dodecyl sulfate foam films depending on the concentration of LiCl

 In the present study a detailed investigation of the thickness and contact angles of foam films prepared from sodium dodecyl sulfate as a function of LiCl concentration was carried out. Concentration of LiCl was varied in a wide range from 0.05 to 2.0 M. It was found that in the investigated system Newton black foam films are formed at LiCl concentrations higher than 1.4 M. This observation is proved by contact angle measurements and calculated values for the change of interaction free energy between common and Newton black films. Received: 6 January 1998 Accepted: 11 March 1998     

Dependence of depletion layer thickness on polymer concentration determined by Vincent's pragmatic and Donath's electrophoretic theories

On the interface of a solid surface and a solution of nonadsorbing polymer there exists a depletion layer (DL), where the concentration of polymer segments is lower. Donath's electrophoretic theory, based on the decreased viscosity in the DL region, allows computing DL thickness from the relative (with and without polymer) electrophoretic mobility, the bulk viscosity, and the ionic strength. The aim of this work is to check experimentally Donath's nonlinear electrophoretic (NLE) theory under the most favorable conditions--liposomes in solutions of low-molecular poly(ethylene glycol) (PEG). In order to determine DL thickness, the dependence of mobility on viscosity is chosen instead on ionic strength. The value obtained from NLE theory is compared with the DL thickness calculated by Vincent's pragmatic theory. The conformation-statistical parameters are calculated on the base of viscosimetric measurements of PEG solution. The results indicate a few shortcomings of NLE theory. The main one is that DL thickness does not depend on polymer concentration, a fact that is in discrepancy with the prediction of Vincent's theory. The conclusion is that NLE theory describes well the experimental dependence of the relative mobility on the bulk viscosity, but it is inapplicable to quantitative determination of DL thickness.     

Thinning of foam films of micellar surfactant solutions

Drainage in microscopic circular foam films depends significantly on the radial (tangential) mobility of the film surfaces and is accelerated as compared to the limiting case of tangentially immobile surfaces, where velocity of thinning is described by the classical Reynolds’ equation (outflow of viscous fluid from a cylindrical gap between two solid plates). The structure and composition of the adsorption layer and the interfacial mass transfer determine the tangential mobility of the film surfaces and, hence, the measured velocity of film thinning. Experiments with soluble surfactants below the critical micelle concentrations (CMC) have exhibited the effect of dynamic interfacial elasticity. At relatively low bulk concentrations, the interfacial mass transfer is governed by surface diffusion; close to CMC (saturated adsorption layer), the limiting case of tangentially immobile surfaces can be reached and at concentrations above the CMC the film thinning is accelerated again. Here, we report freshly established data on the kinetic behavior of foam films from micellar solutions of soluble nonionic surfactants (decyl-octaoxyethylene alcohol and dodecyl-octaoxyethylene alcohol) in a wide range of concentrations above the CMC aiming to investigate the effect of partially disintegrated micelles acting as sources of surfactant molecules at the surface.     

Effect of surfactant concentration on the critical thicknesses of liquid films

Summary It is shown that an increase in surfactant concentration at first causes the critical thicknesses of rupture on microscopic films to decrease but gradually a nearly constant value is reached. With films of aqueous solutions of fatty acids (valeric, caproic, caprylic and capric acids), this dependence correlates well with the effect of the surfactant concentration on the damping of capillary waves. With surfactants of the detergent type (OPE-7, OPE-20) in addition to the change of the critical thickness, the transition from rupture to formation of black spots is described, as the surfactant concentration exceedsC _bl. The remarkable fact in the latter case is the independence of the critical thickness of the final state, be it rupture or formation of first or second black films.On the basis of the experimental data the assumption is put forward that the critical thickness of rupture or the critical thickness of formation of black spots is substantially affected by macroscopic non-uniformities in the film thickness. Thus the conclusion is reached that the critical thickness of an ideally plane parallel film which is the object of the theory, must be obtained by extrapolation of the measured value toward extremely small radii.

---

Zusammenfassung Es wird gezeigt, daß die kritischen Zerreißdicken mikroskopischer Schaumfilme, die mit der Zunahme der Tensidkonzentration zunächst abnehmen, dann aber ungefähr konstante Werte erreichen. Diese Abhängigkeit ist in guter Übereinstimmungmitdem Einfluß des Tensides auf die Kapillarwellendämpfung in wäßrigen Lösungen von vier Fettsäuren. Bei Tensiden, die gute Schäumer sind (OPE-7, OPE-2) zerreißt der Film mit der Zunahme der Konzentration überC _bl nicht, sondern es bilden sich schwarze Flecke. Es ist sehr interessant, daß die kritische Dicke unabhängig von dem Endzustand (Zerreißen oder Bildung schwarzer Flecke) ist.Aufgrund dieser Experimente wird angenommen, daß die kritische Dicke bei dem Zerreißen oder bei der schwarzen Fleckebildung mikroskopischer Schaumfilme wesentlich von den makroskopischen Ungleichheiten der Filmdicke beeinflußt wird. Daraus wird gefolgert, daß die kritische Dicke eines idealen planparallelen Films durcheine Extrapolation der Meßwerte aufeinen unendlich dünnen Film ermittelt werden kann.

     

Effect of equilibrium and dynamic surface activity of surfactant on foam transport in porous medium

An apparatus containing a visual porous medium plate model and digital video recorder was employed to investigate the transportation of foam stabilized by sodium polyoxyethylene alkylether sulfate (AES), sodium dodecyl benzene sulfonate (SDBS) and TritonX-100 in porous medium. The results showed that transfiguration and fracture were the main transport manners for foam in the porous medium at high gas and liquid transfusion rate. The increase in probability of transfiguration in foam transport process corresponded to the higher flow impedance. A simple U-shape device was designed to investigate the rigidity of surfactant layer at the gas/liquid interface, and the equilibrium surface tension was assigned to be the key parameter which manifests the rigidity of surfactant interface layer. The dynamic surface tension of different surfactant system has also been measured, and the parameters gotten by Rosen model might be the measurement of dynamic elasticity of surfactant interface layer. There is consanguineous relation between the equilibrium surface activity or dynamic activity of the surfactants and the transport of the foam in the porous medium.     

Electrophoresis of a sphere normal to a plane at arbitrary electrical potential and double layer thickness

The electrophoretic movement of a sphere normal to an uncharged, planar surface is analyzed theoretically, taking the effect of double layer polarization into account. Here, both the surface potential of the particle and the thickness of the double layer surrounding it can be arbitrary. We show that if double layer polarization is neglected, the effect of the surface potential of a particle on its electrophoretic velocity is inappreciable. On the contrary, it becomes significant if double layer polarization is present. However, if the distance between the particle and the surface is sufficiently close, since the hydrodynamic effect dominates, the influence of the surface potential and double layer polarization becomes insignificant.     

Surfactant accumulation within the top foam layer due to rupture of external foam films

The analysis of processes taking place in a steady pneumatic (dynamic) foam shows the possibility of different modes of surfactant accumulation within the top layers of bubbles due to rupture of external foam films. An increasing surfactant concentration within the top layers promotes the stabilisation of bubbles and the foam as a whole. Considering the balance of surfactant and water during the bursting of films it is possible to estimate the accumulated surfactant loss caused by a downwards flow through the Plateau borders of the subsurface bubble layer. This effect depends on the particular conditions, especially on the surfactant activity and concentration of the surfactant, water volume fraction in the foam and size of foam bubbles. The process of surfactant accumulation in the top foam bubble layer can be complicated due to the removal of part of the accumulated surfactant through transport with droplets spread out during bubble bursting.     

Effect of ionic surfactants on drainage and equilibrium thickness of emulsion films

This paper presents new theoretical and experimental results that quantify the role of surfactant adsorption and the related interfacial tension changes and interfacial forces in the emulsion film drainage and equilibrium. The experimental results were obtained with plane-parallel microscopic films from aqueous sodium dodecyl sulphate solutions formed between two toluene droplets using an improved micro-interferometric technique. The comparison between the theory and the experimental data show that the emulsion film drainage and equilibrium are controlled by the DLVO interfacial forces. The effect of interfacial viscosity and interfacial tension gradient (the Marangoni number) on the film drainage is also significant.     

Controlling layer thickness and photostability of water-soluble cationic poly(p-phenylenevinylene) in multilayer thin films by surfactant complexation

In this work we build on prior studies of the novel water-soluble cationic conjugated polymer known as "P2" (poly{2,5-bis[3-( N, N, N-triethylammonium bromide)-1-oxapropyl]-1,4-phenylenevinylene}) with a focus on its incorporation into thin films for such applications as photovoltaics or electroluminescent devices. Multilayer assemblies were constructed using P2, the anionic surfactant sodium dodecyl sulfate (SDS), and the polyanion poly(sodium 4-styrene-sulfonate) (PSS) using the technique of layer-by-layer electrostatic self-assembly (LBL-ESA). SDS was observed to affect the layer thicknesses and absorbance characteristics of the films. We show that the optical properties and photo-oxidative resistance can be improved by varying the SDS content in the assemblies. Specifically, the surfactant-complexed poly( p-phenylenevinylene) (PPV) shows an enhanced absorption at longer wavelengths as well as improved photostability. Therefore, our work may have broad implications on the development of stable PPV-based materials in general and their efficient integration into thin films technologies.     

Characterization of gelatin-surfactant interaction by thickness measurements of foam films

The influence of ionic surfactants (sodium-dodecylsulfate and cetyltrimethylammonium-bromide) on the thickness of gelatin foam films was investigated. The thickness of pure gelatin films was found to be 80 to < 100 nm. Maximum thicknesses are obtained within the range of the isoelectrical point. Foam films stabilized by gelatin-surfactant complexes are found to form common black films with a thickness of 8 to 12 nm. When the surfactant concentration exceeds the binding capacity of the gelatin the common black films turn into Newton-black films with a thickness comparable to that of a pure surfactant solution.     

Extremes of some foam properties and elasticity of thin foam films near the critical micelle concentration

The elasticity of open and closed thin foam films is analyzed. The elasticity modulus of a closed film is shown to be additive with respect to contributions from Gibbs elasticity and disjoining pressure. A detailed expression for the film elasticity modulus explains the pronounced maxima of foaminess and foam stability near the critical micelle concentration observed earlier in many experiments. A theory of transversal elasticity of thin foam films is formulated under conditions excluding the action of Gibbs elasticity. Near the critical micelle concentration, the theory predicts maxima of the transversal elasticity modulus and of the films thickness as functions of concentration at a given disjoining pressure. The prediction has been verified experimentally by measuring the film thickness in equilibrium foam as a function of height.     

Bending elasticity of charged surfactant layers: the effect of layer thickness

The bending properties of charged one-component surfactant films of finite thickness have been theoretically investigated. It is demonstrated that finite thickness effects are of crucial importance for layers formed by an ionic surfactant with a flexible hydrophobic tail, whereas the influence on layers formed by a surfactant with a rigid tail is less pronounced. As a matter of fact, in the former case, the spontaneous curvature and mean and Gaussian bending constants all become significantly modified as compared to an infinitely thin surface and assume identical values as if the surfactant layer were bent at constant layer thickness. As a result, the spontaneous curvature is found to decrease, whereas the magnitudes of the mean and Gaussian bending constants both increase with increasing layer thickness as well as with increasing hydrophobic-hydrophilic interfacial tension. All of these trends are consistent with experimental observations. In addition, it is demonstrated that separating the hydrophilic-hydrophobic interface and the surface of charge a certain distance from each other tends to increase the spontaneous curvature and the mean bending constant, whereas the Gaussian bending constant becomes increasingly negative. It is also found that the work of bending a bilayer into a geometrically closed vesicle is substantially raised to large positive values for surfactants with flexible aliphatic chains, whereas the corresponding quantity is negative for surfactants with rigid tails, indicating that stable bilayer structures may only be formed by the former surfactant. Furthermore, each of the bending elasticity constants for monolayers formed by a double-chain ionic surfactant are found to assume lower values as compared with layers formed by the corresponding single-chain surfactant.     

Contact angles of protein black foam films under dynamic and equilibrium conditions

The contact angles of protein Newton black foam films from ALG (alpha-lactalbumin), BLG (beta-lactoglobulin) and BSA (bovine serum albumin) are measured here within. The measurements are carried out under dynamic and equilibrium conditions. For all proteins, a strong hystheresis effect of the contact angle is observed under dynamic conditions. An attempt is made to explain these results by the slow adsorption and desorption kinetics of the protein bilayers and by the dynamic structure and the rheology of the protein network forming the bubble walls. In addition, we propose a modification of the experimental device reported previously for contact angle measurements of large flat films in equilibrium. The advantages of this method are discussed in detail. Some shortcomings (precision, reproducibility) of this preliminary variant of the device in this initial stage of its application, do not allow one to draw reliable conclusions about the interactions of these films. Some improvements of the measurement quality are proposed.      

Surface forces in foam films from DPPC and lung surfactant phospholipid fraction

Surface properties of foam films formed from aqueous dispersions of dipalmitoyl-phosphatidylcholine (DPPC) and from solutions of a phospholipid fraction of lung surfactant (TPL) are studied employing the foam film method. Experiments are carried out within a wide range of NaCl concentrations (C_el) and the ranges of C_el determining formation of common films (CF), common black films (CBF) and bilayer Newton black films (NBF) are found. The thickness (h) of the CF and CBF decreases with the increase of C_el until the critical electrolyte concentrations (C_{el, cr}) is reached. The determined C_{el, cr} that characterize the transition to NBF show that C_{el, cr} of the TPL films is an order of magnitude higher than that of the DPPC films. The measured h of the TPL films is higher than that of the DPPC films in the whole C_el range. Besides, only the h(C_el) curve of the DPPC films outlines a metastable C_el range where both CF and NBF are obtained. Both the h(C_el) curves and the direct measurements of the disjoining pressure isotherms of the DPPC films (Π(h) isotherms) demonstrate the role of electrostatic repulsive forces for the stability of the phospholipid films The obtained results are compared with the DLVO theory equations and the evaluated potentials of the diffuse electric layer φ₀  20 mV for the DPPC films and φ₀  100 mV for TPL films show the strong effect of the charged phospholipids in the TPL mixture on the electric properties at the film interfaces.     

Dependence of the solubility of atmospheric oxygen in weakly alkaline aqueous solutions on surfactant concentration

The solubility of atmospheric oxygen in solutions of surfactants of different natures at 293 K and pH 8 is determined by gas chromatography. It is found that additives of nonionic surfactants decrease the oxygen content in the solution in the premicellar region and increase its solubility in the micellar region. It is shown that, for anionic surfactants, a decrease in the solubility of O₂ is observed over the entire concentration range.     

Electrophoresis of a particle at an arbitrary surface potential and double layer thickness: importance of nonuniformly charged conditions

Recent advances in material science and technology yield not only various kinds of nano- and sub-micro-scaled particles but also particles of various charged conditions such as Janus particles. The characterization of these particles can be challenging because conventional electrophoresis theory is usually based on drastic assumptions that are unable to realistically describe the actual situation. In this study, the influence of the nonuniform charged conditions on the surface of a particle at an arbitrary level of surface potential and double layer thickness on its electrophoretic behavior is investigated for the first time in the literature taking account of the effect of double-layer polarization. Several important results are observed. For instance, for the same averaged surface potential, the mobility of a nonuniformly charged particle is generally smaller than that of a uniformly charged particle, and the difference between the two depends upon the thickness of double layer. This implies that using the conventional electrophoresis theory may result in appreciable deviation, which can be on the order of ca. 20%. In addition, the nonuniform surface charge can yield double vortex in the vicinity of a particle by breaking the symmetric of the flow field, which has potential applications in mixing and/or regulating the medium confined in a submicrometer-sized space, where conventional mixing devices are inapplicable.     

Black foam films stabilized with the mixtures of bovine serum albumin and nonionic surfactant Tween 80

Stable black films are prepared for the first time from aqueous solutions of Tween 80-bovine serum albumin mixtures. Conditions for their formation and stabilization factors are studied in a Scheludko-Exerowa cell by microinterferometry. It is found that such films are formed when saturated surface layers consist of surfactant-protein 1: 1 complexes, Tween 80 molecules, or their mixtures. A possible mechanism for the thinning of liquid layers and the stabilization of black films is discussed.     

Direct measurement of molecular interaction forces in foam films from lung surfactant fraction

Molecular interaction forces, operative in microscopic foam films obtained from the isolated hydrophobic fractions of porcine lung surfactant (AS-B) are investigated by monitoring film thickness h as a function of electrolyte concentration (C _el) and direct measurements of disjoining pressure/thickness (Π(h)) isotherms. The steep decrease of the common film thickness with the increase of C _el evidences the action of long-range electrostatic surface forces. The experimental h(C _el) curve indicates that non-Derjaguin-Landau-Verwey-Overbeek (DLVO) repulsive forces are operative at C _el where common black (CBF) and Newton black films (NBF) are obtained including the physiologically relevant C _el=0.14 mol dm⁻³ NaCl. The action of additional non-DLVO forces is corroborated by the comparison of the experimentally measured Π(h) isotherm with the DLVO theory. Considering the presence of proteins in AS-B and the formation of lipid-protein complexes it is inferred that steric type forces are operative in CBF and NBF.