Ultra short pulse laser annealing of FeB metallic glasses

We present the results of picosecond laser annealing of as-quenched Fe₈₅B₁₅ and Fe₈₂B₁₈ metallic glasses. The influence of the laser radiation on the surface and bulk properties are studied using CrK X-ray diffraction and transmission Mössbauer spectroscopy. The X-ray data show that the amorphous nature of the surface of the samples can be improved with laser treatment. The mat (cooling) surfaces of the ribbons appear to be more affected by the laser treatment, and show a higher stability. The Mössbauer data reveal that laser annealing of ribbon surfaces also affects the bulk properties of these materials due to induced stresses from the surface layer. The magnetic properties of these materials can be modified by laser annealing.     

Different kinds of magnetic anisotropies induced by current annealing in metallic glasses

It has been previously shown that when flowing an electrical current along ribbon-shaped amorphous alloys, a transverse macroscopic magnetic anistropy was induced. In the present work, the modification of that induced anisotropy is investigated when the sample is additionally subjected either to external magnetic fields or to tensile stresses. Moreover, the kinetics of its activation process is analysed in the framework of a continuous spectrum of activation energies.     

Nonthermal pulsed laser annealing of Si; plasma annealing

In the accompanying paper we have given evidence that pulsed laser annealing of Si does not involve normal thermal melting and recrystallization. Here we argue the importance of the electron-hole plasma produced by the laser to the annealing process.     

Influence of annealing on magnetic properties of Co-based metallic glasses

The influence of low-temperature annealing on the magnetic hysteresis loop parameters of magnetostrictive Co-Si-B and nonmagnetostrictive Co-Fe-Si-B glasses was studied. The dependence of Curie temperature (T_C), crystallization temperature (T_x), full-stress-relaxation temperature, saturation magnetostriction constant, saturation magnetization and coercive field H_c on metalloids contents for as quenched Co_100-x(Si_0.5B_0.5)_x glasses was determined.It was found that annealing enhances remanence magnetization for all investigated Co-Si-B glasses. The coercive field of these glasses is influenced by annealing owing to: stress relaxation (resulting in an H_c decrease) and domain structure stabilization (resulting in an H_c increase). Significant H_c reduction for both magnetostrictive and non-magnetostrictive glasses was observed, after annealing above T_C. For glasses with T_C<>T_x, it was necessary to apply an external magnetic field in ord er to decrease H_c.It was found that non-magnetostrictive metallic glasses with low Curie temperatures (T_C ? 450 K) exhibit the most stable magnetic hysteresis loop parameters.     

Superconducting V3Si produced by pulsed laser annealing

Pulsed laser annealing has been utilized to fabricate superconducting V₃Si from multilayer V-Si thin film samples. It is demonstrated that a single laser pulse can induce mixing to form V₃Si in the A15 phase. The effects of multiple laser pulses and post thermal annealing on the superconducting transition temperature and width are presented, and a model is proposed to explain the effects of rapid heating and cooling on the V₃Si structure.     

Autoelectronic emission of metallic films induced by picosecond pulses of infrared laser radiation

The well-known defects of the surface of a solid, microscopic projections and spikes, play a decisive role in electron emission induced by an electric field. If there are mobile electrons of holes in the solid, then the electric field is enhanced by a factor of 10–100 at the tip of a microscopic projection. This effect was discovered in electrostatics more than a century ago. In turn, the probability of tunnel emission of an electron from a metal into a vacuum is an exponential function of the electric field strength. Correspondingly the electron emission current density at the tip of a microscopic spike can be larger than that on a smooth surface by an astronomical factor. This effect is particularly strikingly manifested when picosecond pulses of infrared laser radiation of moderate power are used to initiate autoelectronic emission. Relative to a smooth surface, the emission current density is enhanced by hundreds of orders of magnitude. These experimental conditions can be used to scan the surface of a conducting material with a laser beam and to detect all the microscopic projections, in order to male detailed observations with subpicosecond time resolution of the phase transition from autoelectronic emission to explosive emission. Polytechnic University, Tomsk. Institute of Electrophysics, Ural Branch of the Russian Academy of Sciences. French National Scientific Center, Saclay, France. Translated from Izvestiya Vysshikh Uchenbnykh Zavedenii, Fizika, No. 11, pp. 42–44, November, 1997.     

Sensitive detection of laser damage to Mo/Si multilayers by picosecond ultrasonics

Picosecond ultrasonics is used to study the damage or degradation of Mo/Si multilayers caused by laser irradiation. Changes of surface phonon spectra in multilayers due to femtosecond laser damaging are observed in a regime of extremely low fluence level, well before the onset of melting, delamination, distortion, or material interdiffusion. It is found that the damage is shallow in depth (top few layers), and its mechanism is laser-induced changes in acoustic impedances, most likely due to stress relaxation. Its effects on extreme ultraviolet (EUV) reflectance and implications for projection EUV lithography are also discussed. We believe this technique has a potential application as a highly sensitive tool capable of detecting low-degree or early-stage damage of multilayers. PACS 68.65.Cd; 61.80.Ba; 78.47.+p     

A self-quenching picosecond distributed feedback dye laser pumped by a picosecond laser pulse

A tunable single short pulse laser system with a transform–limited bandwidth pumped by a picosecond Nd:YAG laser (ca. 120 ps pulse width) is demonstrated. With this configuration, the relaxation oscillations coming from a distributed feedback dye laser cavity are completely removed. Because the pumping pulsewidth is shorter than the lifetime of dye molecule on the upper laser state, the gain of the laser medium is depleted by the first pulse. The laser wavelength could be precisely tuned with the transform-limited bandwidth (for example, a linewidth of 0.02 nm). After amplification, we obtain a single short laser pulse energy up to 500 μJ at the pulsewidth of 8.2 ps.     

Mössbauer study of annealing induced structural changes in Fe30Ni48Mo2Si5B15 metallic glasses

The effects of prolonged annealing on magnetic properties of a-Fe₃₀Ni₄₈Mo₂Si₅B₁₅ are investigated by means of Mössbauer spectroscopy and Curie temperature, coercive field and spontaneous magnetization measurements. The observed changes of investigated magnetic characteristics indicate that prolonged annealing produces considerable changes in the local short range order around the magnetic atoms.     

Modification of magnetic anisotropy in metallic glasses using high-energy ion beam irradiation

Heavy ion irradiation in the electronic stopping power region induces macroscopic dimensional change in metallic glasses and introduces magnetic anisotropy in some magnetic materials. The present work is on the irradiation study of ferromagnetic metallic glasses, where both dimensional change and modification of magnetic anisotropy are expected. Magnetic anisotropy was measured using Mössbauer spectroscopy of virgin and irradiated Fe₄₀Ni₄₀B₂₀ and Fe₄₀Ni₃₈Mo₄B₁₈ metallic glass ribbons. 90 MeV ¹²⁷I beam was used for the irradiations. Irradiation doses were 5×10¹³ and 7.5×10¹³ ions/cm². The relative intensity ratios D ₂₃ of the second and third lines of the Mössbauer spectra were measured to determine the magnetic anisotropy. The virgin samples of both the materials display in-plane magnetic anisotropy, i.e., the spins are oriented parallel to the ribbon plane. Irradiation is found to cause reduction in magnetic anisotropy. Near-complete randomization of magnetic moments is observed at high irradiation doses. Correlation is found between the residual stresses introduced by ion irradiation and the change in magnetic anisotropy.     

Differences between spin glasses and ferroglasses: PdFeSi

Near the multicritical point in the magnetic phase diagram, some alloys that appear to be simple spin glasses actually have an intermediate ferromagnetic-like state between the high-temperature paramagnetic and low-temperature spin-glass states. The temperature dependences of the imaginary component of a.c. susceptibility and d.c. magnetization are presented to illustrate the subtle experimental differences between spin glasses and these ferroglasses.     

Effect of pressure on electrical resistance of Pd82−xVxSi18 metallic glasses

Measurements have been made of the effect of hydrostatic pressure to 10 kbar, at room ambient temperatures, on the electrical resistance of a series of Pd_82?xV_xSi₁₈ metallic glasses with x varying from 0 to 6 at.%. These glasses show positive temperature coefficients of resistance at low vanadium concentrations, varying monotonically to negative coefficients at high concentrations. It is found that, independent of vanadium concentration, the pressure coefficient of resistance of all the glasses is identically zero to one part in 10⁴, indicating that the pressure derivative of the logarithm of the resistivity is exactly equal to the negative of the linear compressibility. The implication of this result with respect to theoretical models is discussed; only the Ziman liquid metal model provides a consistent explanation.     

Interaction of high-power laser pulses with glasses containing implanted metallic nanoparticles

Sodium calcium silicate glasses with Ag⁺ implanted ions are studied. The ion implantation conditions are as follows: the energy is 60 keV, the dose is 7×10¹⁶ cm⁻², and the ion current density is 10 μA/cm². Ion implantation provides the formation of a composite layer that incorporates silver nanoparticles in the surface region of glass. The size distribution of nanoparticles over the depth in the composite layer is strongly nonuniform. The effect of a high-power pulsed excimer laser on the composite layer is investigated. It is found that, under laser irradiation, the size of silver nanoparticles in the implanted layer decreases but the size distribution of nanoparticles over the depth remains nonuniform, even though it becomes slightly narrower compared to that observed prior to irradiation. The experimental results are interpreted in terms of the effects of the melting of glass and metallic particles on a nanosecond scale. __________ Translated from Fizika Tverdogo Tela, Vol. 43, No. 11, 2001, pp. 2100–2106. Original Russian Text Copyright ? 2001 by Stepanov, Popok, Hole, Bukharaev.     

溴化亚铜激光泵浦的可调谐微微秒染料激光

本文首次报道了利用脉宽为25ns重复率为10kHz的溴化亚铜激光泵浦混有饱和吸收体DODCI的超短腔染料激光,产生出30ps光脉冲.在理论上对混入DODCI的超短腔染料激光脉冲压缩效应作了分析计算,计算结果与实验基本一致.在实验上又通过一个放大-色散系统实现对此染料激光脉冲的同步放大和调谐,并达到傅里叶变换极限.     

金属玻璃的稳定性

玻璃态材料自诞生以来一直受到自身稳定性的困扰。为了保障玻璃的服役安全性,人们一直努力提高玻璃的耐久性和稳定性。玻璃能否经年累月地保持长期稳定？影响其稳定性的物理机制和根源是什么？这些都是非晶态物理领域长期关注的重要难题。根据以往对非晶合金稳定性的研究结果,文章将简单介绍玻璃亚稳性的起源,然后介绍玻璃如何能够保持长期稳定,如何提高玻璃的热力学和动力学稳定性以制备出超稳玻璃,最后介绍影响玻璃稳定性的材料因素,用于指导有效地获得高稳定性玻璃。对玻璃稳定性的认识和理解,既能够保障玻璃材料服役过程中的安全性,又对认识过冷液体和玻璃转变等基本物理问题非常关键。     

Effect of insitu annealing on physical properties of Si nanoparticles synthesized by pulsed laser ablation

Silicon nanocrystalline particles with a uniform size were successfully synthesized by a sequential system of pulsed-laser ablation, insitu annealing and a size classification using a differential mobility analyzer (DMA). Transmission electron microscopy (TEM) observations revealed that the insitu annealing was quite effective in improving morphological uniformity of the particles; most of the nanoparticles annealed above a temperature of 900 °C showed a spherical shape. The silicon nanoparticles classified after the annealing showed a very narrow size-distribution with a geometrical standard deviation of approximately 1.1. Raman scattering measurement and high-resolution TEM observation showed that the annealing was also effective in improving a crystallinity of the particles. The silicon nanoparticles showed photoluminescence (PL) in near-IR and visible region at room temperature, which depended on the insitu annealing condition; the full-width at half-maximum (FWHM) of the PL spectrum decreased with the increase in annealing temperature and reached as narrow as 190 meV corresponding to the sharp size distribution of the emitting particles. PACS 81.40.Pq; 81.07.Bc     

Microstructure of fragile metallic glasses inferred from ultrasound-accelerated crystallization in Pd-based metallic glasses

By utilizing ultrasonic annealing at a temperature below (or near) the glass transition temperature Tg, we revealed a microstructural pattern of a partially crystallized Pd-based metallic glass with a high-resolution electron microscopy. On the basis of the observed microstructure, we inferred a plausible microstructural model of fragile metallic glasses composed of strongly bonded regions surrounded by weakly bonded regions (WBRs). The crystallization in WBRs at such a low temperature under the ultrasonic vibrations is caused by accumulation of atomic jumps associated with the beta relaxation being resonant with the ultrasonic strains. This microstructural model successfully illustrates a marked increase of elasticity after crystallization with a small density change and a correlation between the fragility of the liquid and the Poisson ratio of the solid.     

Laser induced long-lived emission spectra of laser dyes in rigid glasses at 77 K

Phosphorescence decay of 3-(2′-N-methylbenzimidazolyl)-7-N, N-diethylaminocoumarin; 2,3,5,6-1H, 4H-tetrahydro-8-methylquinolizino-〈9, 9a, 1-gh〉 coumarin; 2,3,5,6-1H, 4H-tetrahydro-8-trifluormethylquinolizino-〈9,9a,1-gh〉 coumarin; 9(10H)-acridone; 9-aminocridine hydrochloride, 1-hydrate and 2-(4-biphenylyl)-5-(4-t-butylphenyl)-1,3, 4-oxadiazole dyes in EPA glass at 77 K have been recorded using N₂ laser. The results were used to determine lifetimes. Emission intensities from the first two dyes have been examined in relation to dye concentration and excitation intensity. The results are discussed.     

Heating of opaque surfaces by picosecond laser pulses

Received: 5 June 1997/Accepted: 13 June 1997     

Generation of rayleigh waves by picosecond laser pulses

In this paper we present the fundamental mechanism which we hold responsible for generation of high frequency Rayleigh waves by picosecond laser pulses on a single crystal surface of Silicon. These Rayleigh waves have been recorded as ripples frozen out on the surface of the crystal upon irradiation with a focused cw mode-locked laser.