不同酸对介孔二氧化硅球表面形貌和介相结构的影响

在室温、不同酸性条件下合成出微米级球形介孔二氧化硅材料，通过XRD、SEM以及氮气吸附等手段对介孔二氧化硅材料进行了表征。用TEM跟踪不同反应时间介孔二氧化硅球的形成，对这些球颗粒的合成机理进行了讨论，同时探讨了不同酸性条件下介孔二氧化硅表面形貌和介相结构的变化。     

不同形貌介孔二氧化硅的可控制备与表征

介孔材料由于具有比表面积和孔体积较大、孔径均一、纳米尺寸可调、二氧化硅无生理毒性、热稳定性较好等一系列特点而引起了人们广泛的兴趣和关注.控制介孔二氧化硅的形貌和尺寸可以拓展介孔二氧化硅的应用,尤其是开发介孔二氧化硅在生物医学、色谱以及便于调控的催化材料等方面的用途.     

以EDTANa2为矿化剂近中性条件下室温合成介孔二氧化硅

利用EDTANa2作为矿化剂, 在近中性条件下于室温合成了厚壁(约3 nm)蠕虫介孔分子筛. 在反应物配比为n(CTAB):n(TEOS):n(EDTANa2):n(H2O)=(0.05~0.2):(0.1~2):(0.1~0.5):(100~500)范围内都能得到介孔二氧化硅. 以XRD、N2吸附、FTIR、SEM和TEM详细考察了体系配比和温度对介孔二氧化硅结构和形貌的影响, 发现CTAB用量越大, 介孔d值相应增大. 温度对介孔二氧化硅的结构和形貌有很大的影响, 温度在2~15 ℃范围内都能生成孔径分布较规则的介孔, 介孔材料的形貌随温度的升高由空心管变成小颗粒聚集体; 合成的介孔分子筛中的模板剂可以通过乙醇萃取的方式除去. 提出了介孔的生成遵从(S+-E-)0-I0中性模板机理.     

复合介孔二氧化硅膜的制备及应用

复合介孔二氧化硅膜是近十年来发展起来的一种具有独特孔中孔结构的新型膜材料。该材料以多孔膜（无机多孔膜或者有机多孔膜）为硬模板,以表面活性剂为结构导向剂,通过溶胶-凝胶等方法将介孔二氧化硅材料组装在多孔膜的孔道中制备而成。由于其具有不同于传统介孔二氧化硅膜材料的一些独特结构和性能,并在分离、吸附和催化等领域具有广泛的应用前景,引起了人们广泛的关注。本文主要就复合介孔二氧化硅膜的制备方法,特别是近几年内其在纳滤、纳米材料的模板合成、酶的固定、传感器、反应器以及药物释放等方面最新的应用研究进展进行论述,同时对这类新型的复合介孔二氧化硅膜材料在合成和应用方面存在的问题进行了分析和总结,并对其发展前景作了展望。     

介孔气体吸附剂

介孔二氧化硅经过表面修饰,赋予介孔材料不同的特性,具有很多的潜在用途,是无机材料研究的热点之一。本文综述了近年来以介孔二氧化硅（M41S 和 SBA）为载体设计的气体吸附剂的研究进展。详细讨论了二氧化碳和可挥发性有机物(VOCs)在介孔吸附剂上的吸附过程;介绍了二氧化碳介孔吸附剂的不同制备方法和影响二氧化碳在介孔吸附剂上吸附的因素,以及介孔吸附剂的结构对可挥发性有机物吸附过程的影响。最后,对介孔气体吸附剂的发展进行了展望。     

功能化有序介孔二氧化硅材料在分析样品前处理中的应用

功能化有序介孔二氧化硅材料具有均一可调的介孔孔径、规则的孔道、稳定的骨架结构、易于修饰的内表面和较高的比表面积、高的吸附容量等特性,可用于生物、医药、环境样品等复杂基体中痕量分析物的高选择性分离与富集,因此在样品前处理中的应用特别引人瞩目。文中简要介绍了功能化有序介孔二氧化硅材料的制备方法,综述了功能化有序介孔二氧化硅材料在分离富集金属离子、有机污染物以及生物大分子样品前处理中的应用进展。     

硬模板法高温水热合成微孔-介孔二氧化硅及掺铝介孔二氧化硅

摘要 采用高温水热合成的方法有利于得到具备高水热稳定性的介孔二氧化硅.本研究中,我们利用α-亚麻酸在加热条件下通过胶束内聚合转化为能够耐受高温水热环境的介观模板,利用此硬模板在高温水热条件下直接合成了微孔-介孔二氧化硅及掺铝介孔二氧化硅.采用了不同的表征手段如X射线衍射（XRD）,氮气吸附,透射电镜等手段对材料进行了表征. 实验结果表明,制得的材料在沸水中处理5天后,仍能保持670m2 g-1的比表面积.透射电镜结果和NLDFT孔径分析结果显示,材料同时具备介孔和微孔结构.29Si MAS NMR谱图显示,完全缩聚的Q4型硅为材料中主要的硅组分,这解释了材料的高水热稳定性.     

氧化钨介孔材料的制备与表征

以介孔二氧化硅(KIT-6)为硬模板, 硅钨酸为钨源, 用硬模板法制备WO3-SiO2复合材料, 再利用HF除去二氧化硅, 得到了介孔三氧化钨材料. 用X射线衍射(XRD)、能量扩散X射线(EDX)、高分辨透射电镜(HRTEM)、N2吸附-脱附等表征手段, 对制备复合材料的物料比、煅烧温度以及不同分散剂等条件进行了考察. 结果表明, 硅钨酸与硅介孔的物料比(m(WO3)/m(SiO2))在3:1到4:1之间, 在600-750 ℃下煅烧, 能制备结构较好的介孔氧化钨. 乙醇和蒸馏水为分散剂时, 用乙醇为分散剂所得的介孔WO3材料具有更高的比表面积和孔体积.     

三维有序大孔-介孔二氧化硅的可控制备及表征

以聚甲基丙烯酸甲酯(PMMA)胶晶为大孔模板、嵌段共聚物P123为介孔模板,利用双模板剂法进行了三维有序大孔-介孔二氧化硅材料的制备研究。采用SEM、TEM、低角XRD以及N₂吸脱附技术对样品进行了表征。结果表明,通过简单的调控PMMA胶晶模板的组装过程,就可以调变合成材料中的大孔结构,从而轻松地实现可控的制备出具有网状或者层状结构的三维有序大孔-介孔二氧化硅材料,并提出了其可能的形成机理。此外,所制备的三维有序大孔-介孔二氧化硅样品均具有较大的BET比表面积(>550m₂·g^-1),大孔孔径200nm左右,介孔孔径分布集中于3.5nm左右。     

氨基改性介孔二氧化硅的制备及其吸附性能研究

合成了一种具有较大孔径的氨基改性介孔二氧化硅材料(m-MCF)。通过XRD、TEM、低温氮吸附、TGA、FTIR以及原子吸收光谱(AAS)等表征方法对产物的结构和性能进行的分析表明:利用三甲基苯为扩孔剂制备得到的介孔材料具有较大的孔径，有利于功能基团对孔内表面的改性。当氨基改性介孔材料后，该材料仍然保留较大的孔径(22 nm)和较高的比表面积(444 m²·g^-1)。研究发现:与改性而未扩孔的介孔二氧化硅SBA-15相比，该材料对铜离子的吸附能力提高了2倍。     

Temperature Dependence in the Synthesis of SBA-16-Type Mesoporous Silica with Pluronic F68 Block Copolymer

By adjusting the local effective surfactant packing parameter through synthesis temperature, highly ordered SBA-16-type mesoporous silica materials have been synthesized by templating with a nonionic triblock copolymer Pluronic F68 in strongly acidic conditions at temperature 30～40°C with the addition of K₂SO₄. The prepared SBA-16-type mesoporous silica materials having Im3m cubic mesostructure were proved by the well-defined x-ray diffraction patterns combined with transmission electron microscopy. Scanning electron microscopy indicated that a transformation from faced-sphere to faced-polyhedron shape morphologies could be induced with increasing of the synthesis temperature. The nitrogen adsorption–desorption analysis revealed that the mean pore size (5.50～6.13 nm) of the prepared materials increased with increasing synthesis temperature. However, when the synthesis temperature exceeded 46°C, only disordered mesoporous silca was obtained. Our synthesis strategies by adjusting the local effective surfactant packing parameter through synthesis condition, even in a narrow range, would be used not only to optimize the synthesis conditions of reported mesoporous silca, but also to fabricate new mesoporous silica materials with well-ordered channel and anticipated morphologies.     

Synthesis of rod-like mesoporous silica with hexagonal appearance using sodium silicate as precursor

Using sodium silicate as precursor, rod-like mesoporous silica with hexagonal appearance was synthesized by controlling the pH value of a mixed micelles solution of cetyltrimethylammonium bromide (CTAB) and cetyltrimethylammonium chloride (CTAC) during hydrolysis of ethyl acetate. The resulting mesoporous silica was characterized by small angle X-ray diffraction, nitrogen gas adsorption-desorption measurement and scanning electron microscopy. Results showed that the regular rod-like shapes with hexagonal appearance were obtained at a 9:1 molar ratio of CTAB to CTAC, and that the amounts and lengths of the rod-like mesoporous silica particles decreased with decreasing CTAB to CTAC molar ratio. There existed a type IV adsorption isotherm and an H1 hysteresis loop in N₂ gas adsorption-desorption curves.     

Synthesis of carboxyl-modified rod-like SBA-15 by rapid co-condensation

Carboxyl-modified SBA-15 rod-like mesoporous materials have been synthesized by a facile rapid co-condensation of tetraethylorthosilicate (TEOS) and 2-cyanoethyltriethoxysilane (CTES), followed by hydrolysis of cyanide groups in sulfuric acid. The concentration of carboxylic groups was varied by changing the silica source ratio of CTES/TEOS from 0.05 to 0.3. X-ray diffraction (XRD), scanning electron microscopy (SEM) and transmission electron microscopy (TEM) showed that the uniform ordered mesoporous structure and rod-like morphology of SBA-15 have been preserved even at the high concentration of carboxylic groups employed. Characterization by Fourier transformed infrared spectroscopy (FTIR), solid-state NMR investigation indicated that carboxylic groups have been successfully grafted onto the surface of SBA-15 through siloxane bonds [(O(3))SiCH(2)CH(2)COOH. The negative charges of the modified SBA-15 materials were enhanced by the presence of the carboxylic groups on the surface. The capacity of lysozyme adsorption of the modified SBA-15 materials were found to be significantly improved as compared with pure silica SBA-15. The maximum amount of lysozyme adsorption on carboxyl-modified was increased with the pH of solution increased from 5.5 to 9.0.     

Synthesis of mesoporous NiO with crystalline walls by a simple sol–gel route

Mesoporous NiO particles with crystalline walls were prepared by a simple sol-gel technique. X-ray diffraction (XRD), N₂ adsorption–desorption, field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM) have been used to investigate the mesoporous NiO particles. The as-prepared mesoporous NiO possessed narrow pore in the range of mesopores and was stable up to 700 ^oC. Various characterization results showed that the mesostructure was formed through the aggregation of nanocrystals and stearic acid in the precursor played an important role in formation of the final mesoporous structures. Mesoporous Ni particles have also been successfully synthesized by reduction of the obtained mesoporous NiO at 700 ^oC for 30 min.     

Magnetic Fe3O4@mesoporous silica composites for drug delivery and bioadsorption

Magnetic Fe(3)O(4)@mesoporous silica (MS) composites were synthesized by generating Fe(3)O(4) nanoparticles in the mesoporous silica matrix using the sol-gel method in nitrogen atmosphere. The mesoporous silica hosts include SBA-15 particles owning highly ordered p6mm mesostructure, siliceous mesostructured cellular foams (MCFs), and fiber-like mesoporous silica (FMS) with unique pore structures. The X-ray diffraction (XRD), transmission electron microscopy (TEM), and N(2) adsorption/desorption results show that Fe(3)O(4) functionalized MCFs and FMS possess suitable mesoporous structure for the adsorption of both small-molecular drug and large biomolecules. The biocompatibility tests on L929 fibroblast cells using MTT assay reveal low cytotoxicity of these systems. These Fe(3)O(4)@mesoporous silica composites show sustained release properties for aspirin in vitro. The release of the aspirin molecules from the pores of the Fe(3)O(4)@mesoporous silica composites is basically a diffusive process. Fe(3)O(4)@MCFs and Fe(3)O(4)@FMS owning larger pore size are good candidates for the adsorption of bovine serum albumin (BSA). These magnetic composites can be potential vectors for drug delivery and bioadsorption.     

Facile synthesis of mesoporous silica sublayer with hierarchical pore structure on ceramic membrane using anionic polyelectrolyte

A facile method for introducing mesoporous silica sublayer onto the surface of a ceramic membrane for use in liquid-phase separation is described. To reduce the electrostatic repulsion between the mesoporous silica sol and the ceramic membrane in highly acidic conditions (pH < 2), thus facilitating the approach of hydrolyzed silica sol to the surface of the membrane, poly(sodium 4-styrenesulfonate) (Na+PSS-, denoted as PSS-) was used as an ionic linker. The use of PSS- led to a significant reduction in positive charge on the ceramic membrane, as confirmed by experimental titration data. Consistent with the titration results, the amount of mesoporous silica particles on the surface of the ceramic membrane was low, in the absence of PSS- treatment, whereas mesoporous silica sublayer with hierarchical pore structure was produced, when 1 wt % PSS- was used. The results show that mesoporous silica grows in the confined surface, eventually forming a multistacked surface architecture. The mesoporous silica sublayer contained uniform, ordered (P6 mm) mesopores of ca. 7.5 nm from mesoporous silica as well as macropores ( approximately mum) from interparticle voids, as evidenced by transmission electron microscopy and scanning electron microscopy analyses. The morphologies of the supported mesoporous silica could be manipulated, thus permitting the generation of uniform needlelike forms or uniform spheroid particles by varying the concentration of PSS-.     

共缩聚法制备有序介孔氧化硅纳米螺旋纤维

在传统球状介孔氧化硅合成工作的基础上,以正硅酸乙(TEOS)和γ-巯丙基三甲氧基硅烷(MPTMS)为硅源,在水体系下利用共缩聚法一步合成出具有介孔分子筛结构特征的纳米纤维,并通过扫描电子显微镜(SEM)、小角X射线衍(XRD)、透射电子显微镜(TEM)和氮气吸附-脱附实验对样品进行了表征与分析.     

High-temperature synthesis of stable ordered mesoporous silica materials by using fluorocarbon-hydrocarbon surfactant mixtures

Highly ordered hexagonal mesoporous silica materials (JLU-20) with uniform pore sizes have been successfully synthesized at high temperature (150-220 degrees C) by using fluorocarbon-hydrocarbon surfactant mixtures. The fluorocarbon-hydrocarbon surfactant mixtures combine the advantages of both stable fluorocarbon surfactants and ordered hydrocarbon surfactants, giving ordered and stable mixed micelles at high temperature (150-220 degrees C). Mesoporous JLU-20 shows extraordinary stability towards hydrothermal treatment (100 % steam at 800 degrees C for 2 h or boiling water for 80 h), thermal treatment (calcination at 1000 degrees C for 4 h), and toward mechanical treatment (compressed at 740 MPa). Transmission electron microscopy images of JLU-20 show well-ordered hexagonal arrays of mesopores with one-dimensional (1D) channels and further confirm that JLU-20 has a two-dimensional (2D) hexagonal (P6 mm) mesostructure. 29Si HR MAS NMR spectra of as-synthesized JLU-20 shows that JLU-20 is primarily made up of fully condensed Q4 silica units (delta=-112 ppm) with a small contribution from incompletely cross-linked Q3 (delta=-102 ppm) as deduced from the very high Q4/Q3 ratio of 6.5, indicating that the mesoporous walls of JLU-20 are fully condensed. Such unique structural features should be directly attributed to the high-temperature synthesis, which is responsible for the observed high thermal, hydrothermal, and mechanical stability of the mesoporous silica materials with well-ordered hexagonal symmetry. Furthermore, the concept of "high-temperature synthesis" is successfully extended to the preparation of three-dimensional (3D) cubic mesoporous silica materials by the assistance of a fluorocarbon surfactant as a co-template. The obtained material, designated JLU-21, has a well-ordered cubic Im3m mesostructure with fully condensed pore walls and shows unusually high hydrothermal stability, as compared with conventional cubic mesoporous silica materials such as SBA-16.     

MCM-48-like large mesoporous silicas with tailored pore structure: facile synthesis domain in a ternary triblock copolymer-butanol-water system

Assembly of mesostructured silica using Pluronic P123 triblock copolymer (EO(20)-PO(70)-EO(20)) and n-butanol mixture is a facile synthesis route to the MCM-48-like ordered large mesoporous silicas with the cubic Iad mesostructure. The cubic phase domain is remarkably extended by controlling the amounts of butanol and silica source correspondingly. The extended phase domain allows synthesis of the mesoporous silicas with various structural characteristics. Characterization by powder X-ray diffraction, nitrogen physisorption, scanning electron microscopy, and transmission electron microscopy reveals that the cubic Iad materials possess high specific surface areas, high pore volumes, and readily tunable pore diameters in narrow distribution of sizes ranging from 4 to 12 nm. Moreover, generation of complementary pores between the two chiral channels in the gyroid Iad structure can be controlled systematically depending on synthesis conditions. Carbon replicas, using sucrose as the carbon precursor, are obtained with either the same Iad structure or I4(1)/a (or lower symmetry), depending on the controlled synthesis conditions for silica. Thus, the present discovery of the extended phase domain leads to facile synthesis of the cubic Iad silica with precise structure control, offering vast prospects for future applications of large-pore silica materials with three-dimensional pore interconnectivity.