Thermochemistry of ionic liquid-catalyzed reactions. experimental and theoretical study of chemical equilibria of isomerization and transalkylation of tert-butylbenzenes

The chemical equilibrium of mutual interconversions of tert-butylbenzenes was studied in the temperature range 286 to 423 K using chloroaluminate ionic liquids as a catalyst. Enthalpies of five reactions of isomerization and transalkylation of tert-butylbenzenes were obtained from temperature dependences of the corresponding equilibrium constants in the liquid phase. Molar enthalpies of vaporization of methyl-tert-butylbenzenes and 1,4-di tert-butylbenzene were obtained by the transpiration method and were used for a recalculation of enthalpies of reactions and equilibrium constants into the gaseous phase. Using these experimental results, ab initio methods (B3LYP and G3MP2) have been tested for prediction thermodynamic functions of the five reactions under study successfully. Thermochemical investigations of tert-butylbenzenes available in the literature combined with experimental results have helped to resolve contradictions in the available thermochemical data for tert-butylbenzene and to recommend consistent and reliable enthalpies of formation for this compound in the liquid and the gaseous state.     

Thermochemistry of ionic liquid-catalysed reactions. Isomerisation and transalkylation of tert-alkyl-benzenes. Are these systems ideal?

The chemical equilibrium of mutual interconversions of tert-alkyl-benzenes was studied in the temperature range (286 to 423) K using chloroaluminate ionic liquids as a catalyst. The knowledge of the activity coefficients is required in order to obtain the thermodynamic equilibrium constants K_a. A well established procedure, COSMO-RS, has been used to assess activity coefficients of the reaction participants in the liquid phase. Enthalpies of five reactions of isomerisation and transalkylation of tert-alkyl-benzenes were obtained from temperature dependences of the corresponding equilibrium constants in the liquid phase. For the sake of comparison, high-level ab initio calculations of the reaction participants have been performed using the Gaussian-03 program package. Absolute electronic energy values of the molecules have been obtained using B3LYP and G3MP2 level. Using these results enthalpies of reaction of isomerisation and transalkylation of tert-alkyl-benzenes in the liquid phase based on the first principles are found to be in good agreement with the data obtained from the thermochemical measurements.     

ANTA的结构、性质及其互变异构的理论研究

对3-硝基-5-氨基-1,2,4-三唑(ANTA)的三种异构体,1H-ANTA(Ⅰ),2－ANTA(Ⅱ)和4H-ANTA(Ⅲ)在,bainitio-HF/3-21G和DFT-B3LYP/3-21G势能面计算的基础上,进行6-311G^**几何参数全优化,MP2总能量和SCRF溶剂(四氢呋喃)效应计算。以振动分析和统计热力学为基础,作标题物热力学性质以及Ⅰ和Ⅱ之间的互变异构反应计算,求得分子几何,电子结构和300～1000K范围的焓、熵和热容以及Ⅰ和Ⅱ互变异构平衡常数和速率常数。发现在三种异构体中在通常温度下以Ⅱ在气相下最稳定,Ⅰ在溶液中最稳定。低温下难以发生异构化反应,温度可提高Ⅰ与Ⅱ之间的互变速率,在800K时两种异构体在气相中等量共存;大于800K时Ⅰ更为稳定。     

Thermophysical properties of methanol+some polyethylene glycol dimethyl ether by UNIFAC and DISQUAC group-contribution models for absorption heat pumps

Several group-contribution models including three different versions of UNIFAC, GC-UNIMOD and DISQUAC are tested for their capabilities of predicting vapour–liquid equilibria, excess enthalpies and viscosities of methanol+some polyethylene glycol dimethyl ethers over a wide range of temperature. Also, the literature experimental thermophysical property database of these serial systems are collected, and new experimental excess enthalpies of methanol+pentaethylene glycol dimethyl ether at 303.15 K and densities and kinematic viscosities of methanol with monoethylene glycol dimethyl ether, triethylene glycol dimethyl ether, or pentaethylene glycol ether at 303.15 K are reported as a supplement to this experimental database. The predictions for vapour–liquid equilibria and excess enthalpies from modified UNIFAC of Gmehling et al. are the best, yielding the average relative deviation around 3% for vapour pressure and 30% for excess enthalpy. GC-UNIMOD viscosity group-contribution model gives the average relative deviation around 20% for viscosity predictions of the studied systems     

合成聚甲醛二甲基醚反应热力学的理论计算

采用密度泛函理论(DFT)方法在B3LYP/6-31＋G(d,p)水平上对聚甲醛二甲基醚(PODE)系列化合物进行了全优化和振动分析计算, 获得了该系列化合物的最优构型及热力学函数值. 通过设计等键反应计算了PODE的生成热, 并进一步计算了生成PODE的反应平衡常数及转化率, 进而判断这些反应的热力学可行性.     

Energetic study applied to the knowledge of the structural and electronic properties of monofluorobenzonitriles

The present work reports an energetic and structural study of 2-fluoro-, 3-fluoro-, and 4-fluorobenzonitrile. The standard molar enthalpies of formation, in the condensed phase, of the three isomers were derived from the standard molar energies of combustion, in oxygen, at T = 298.15 K. The standard molar enthalpies of vaporization or sublimation (for 4-fluorobenzonitrile), at T = 298.15 K, were measured using high-temperature Calvet microcalorimetry. The combination of these two parameters yields the standard molar enthalpies of formation in the gaseous phase. The vapor-pressure study of the referred compounds was performed by a static method, and the enthalpies of phase transition derived from the application of the Clarke and Glew equation. Theoretically estimated gas-phase enthalpies of formation, basicities, proton and electron affinities, and adiabatic ionization enthalpies were calculated from the G3MP2B3 level of theory. In order to evaluate the electronic properties, the geometries were reoptimized at MP2/cc-pVTZ level, and the QTAIM and NICS were computed. On the basis of the donor-acceptor system, another approach for evaluating the electronic effect for these compounds, using the NBO is suggested. The UV-vis spectroscopy study for the three isomers was performed. The intensities and the band positions were correlated with the thermodynamic properties calculated computationally.     

Experimental and computational investigation of the thermochemistry of the six isomers of dichloroaniline

The standard (p(o) = 0.1 MPa) molar enthalpies of formation of 2,3-, 2,4-, 2,5-, 2,6-, 3,4- and 3,5-dichloroanilines were derived from the standard molar energies of combustion, in oxygen, to yield CO(2)(g), N(2)(g) and HCl.600H(2)O(l), at T = 298.15 K, measured by rotating bomb combustion calorimetry. The Calvet high-temperature vacuum sublimation technique was used to measure the enthalpies of sublimation of the six isomers. These two thermodynamic parameters yielded the standard molar enthalpies of formation of the six isomers of dichloroaniline, in the gaseous phase, at T = 298.15 K. The gas-phase enthalpies of formation were also estimated by G3MP2B3 calculations, which were further extended to the computation of gas-phase acidities, proton affinities, and ionization enthalpies.     

Measurement and correlation of liquid-liquid equilibria of methanol+alkane+ether ternary systems

Liquid-liquid equilibrium (LLE) data at 25°C are reported for eight ternary systems consisting of methanol, alkane (heptane, octane, nonane or decane), and ether (diethyl ether or dibutyl ether). The UNIFAC group contribution method was used to predict or correlate the ternary LLE data obtained. The predicted results shows the discrepancy from the experiments. Therefore, the UNIFAC group interaction parameters were adjusted to give better correlation performance.     

Enthalpy of the gas-phase CO2 + Mg reaction from ab initio total energies

Various highly accurate ab initio composite methods of Gaussian-n (G1, G2, G3), their variations (G2(MP2), G3(MP2), G3//B3LYP, G3(MP2)//B3LYP), and complete basis set (CBS-Q, CBS-Q//B3LYP) series of models were applied to compute reaction enthalpies of the ground-state reaction of CO2 with Mg. All model chemistries predict highly endothermic reactions, with DeltaH(298) = 63.6-69.7 kcal x mol(-1). The difference between the calculated reaction enthalpies and the experimental value, evaluated with recommended experimental standard enthalpies of formation for products and reactants, is more than 20 kcal x mol(-1) for all methods. This difference originates in the incorrect experimental enthalpy of formation of gaseous MgO given in thermochemical databases. When the theoretical formation enthalpy for MgO calculated by a particular method is used, the deviation is reduced to 1.3 kcal x mol(-1). The performance of the methodologies used to calculate the heat of this particular reaction and the enthalpy of formation of MgO are discussed.     

Excess molar enthalpies of R-fenchone + propan-1-ol or +propan-2-ol. Modeling with COSMO-RS and UNIFAC

In this paper, experimental excess molar enthalpies for the binary mixtures of R-fenchone with propan-1-ol or propan-2-ol, at four temperatures (283.15, 298.15, 313.15 and 328.15) K and atmospheric pressure are reported over the entire composition range. They have been fitted to the Redlich–Kister equation at each temperature. Excess molar enthalpies are positive in all cases, being greater for the mixture with propan-2-ol than for the mixture with propan-1-ol. These positive values of the excess enthalpy suggest the predominance of the effect due to hydrogen bond breaking over the interaction between dissimilar molecules in the mixture. Finally UNIFAC (Dortmund) method and the Quantum Continuum Method COSMO-RS have been used to predict the excess molar enthalpies. Better predictions are obtained in the case of UNIFAC model.     

Computational prediction of the pattern of thermal gravimetry data for the thermal decomposition of calcium oxalate monohydrate

The multistep decomposition of CaC₂O₄·H₂O in the gaseous phase was explored at the MP2/cc-pVDZ level of theory. As a result, the structure and energy of the entities occurring at stationary points along the reaction pathway were determined. Statistical thermodynamics routines were used to obtain thermal energies/enthalpies and entropies. The results demonstrated the consecutive release of H₂O, CO and CO₂ from the substrate with increasing temperature. Moreover, the application of thermodynamic and kinetic characteristics to relevant phenomenological relationships enabled the decomposition pattern in equilibrium and non-equilibrium conditions to be predicted. The forecast patterns qualitatively match the experimental thermal gravimetry data. This study supplies much important information on the molecular changes taking place in a stoichiometric unit of calcium oxalate monohydrate during continuous heating     

Liquid–Liquid Equilibria of Oxygenate Fuel Additives with Water at 25°C: Ternary and Quaternary Aqueous Systems of Methyl tert-Butyl Ether and tert-Amyl Methyl Ether with Methanol or Ethanol

Experimental tie-line data have been determined for the ternary system water + methyl tert-butyl ether + tert-amyl methyl ether and the quaternary systems water + methanol + methyl tert-butyl ether + tert-amyl methyl ether, and water + ethanol + methyl tert-butyl ether + tert-amyl methyl ether at 25°C and ambient pressure. The experimental results have been satisfactorily correlated using the modified UNIQUAC and extended UNIQUAC models with ternary and quaternary, in addition to binary parameters.     

Thermodynamic Stability of Fenclorim and Clopyralid

The present work reports an experimental thermodynamic study of two nitrogen heterocyclic organic compounds, fenclorim and clopyralid, that have been used as herbicides. The sublimation vapor pressures of fenclorim (4,6-dichloro-2-phenylpyrimidine) and of clopyralid (3,6-dichloro-2-pyridinecarboxylic acid) were measured, at different temperatures, using a Knudsen mass-loss effusion technique. The vapor pressures of both crystalline and liquid (including supercooled liquid) phases of fenclorim were also determined using a static method based on capacitance diaphragm manometers. The experimental results enabled accurate determination of the standard molar enthalpies, entropies and Gibbs energies of sublimation for both compounds and of vaporization for fenclorim, allowing a phase diagram representation of the (p,T) results, in the neighborhood of the triple point of this compound. The temperatures and molar enthalpies of fusion of the two compounds studied were determined using differential scanning calorimetry. The standard isobaric molar heat capacities of the two crystalline compounds were determined at 298.15 K, using drop calorimetry. The gas phase thermodynamic properties of the two compounds were estimated through ab initio calculations, at the G3(MP2)//B3LYP level, and their thermodynamic stability was evaluated in the gaseous and crystalline phases, considering the calculated values of the standard Gibbs energies of formation, at 298.15 K. All these data, together with other physical and chemical properties, will be useful to predict the mobility and environmental distribution of these two compounds.     

Hydrogen bond formation to cyclic and acyclic polyethers

Equilibrium constants and enthalpies of hydrogen-bond formation of mcresol to various cyclic (crown) and acyclic polyethers have been determined in benzene solvent. Equilibrium constants indicated no evidence for an operative macrocyclic effect; the relationship between the increasing size of the equilibrium constant and the number of ether oxygens was rationalized with a simple statistical thermodynamic model. Enthalpies of interactions ranged between –19 and –23 kJ-mol^–1. In agreement with PCILO calculations, enthalpies of interaction were essentially independent of the number of oxygen atoms in the ether; no significant difference in enthalpies of interaction between cyclic and acyclic ethers was found.     

Thermochemistry of imidazolium-based ionic liquids: experiment and first-principles calculations

In this work the molar enthalpy of formation of the ionic liquid 1-ethyl-3-methylimidazolium dicyanoamide in the gaseous phase [C(2)MIM][N(CN)(2)] was measured by means of combustion calorimetry and enthalpy of vaporization using transpiration. Available, but scarce, primary experimental results on enthalpies of formation of imidazolium based ionic liquids with the cation [C(n)MIM] (where n = 2 and 4) and anions [N(CN)(2)], [NO(3)] and [NTf(2)] were collected and checked for consistency using a group additivity procedure. First-principles calculations of the enthalpies of formation in the gaseous phase for the ionic liquids with the common cation [C(n)MIM] (where n = 2 and 4) and with the anions [N(CN)(2)], [NO(3)], [NTf(2)], [Cl], [BF(4)] and [PF(6)] have been performed using the G3MP2 theory. It has been established that the gaseous phase enthalpies of formation of these ionic liquids obey the group additivity rules.     

Stabilities of the C-H...O bonded complexes of the haloforms HCClnF3-n (n = 0-3) with dimethyl ether, oxirane, and acetone: an experimental and theoretical study

Complexation enthalpies of the complexes of the haloforms HCCl(n)F(3-)(n) (n = 0-3) with dimethyl ether, oxirane, and acetone have been determined in liquid krypton and/or liquid argon using infrared spectroscopy. The same quantities were derived starting from ab initio complexation energies, calculated at the MP2=FULL/aug-cc-VTZ level, and by correcting these energies for thermodynamic and solvent contributions. The two sets of data are compared and discussed.     

The thermodynamic properties of DL- and L-lactides

The enthalpies of formation of DL-lactide and L-lactide, cyclic esters of lactic acid, were determined by combustion calorimetry. The transfer method was used to measure their vapor pressures and obtain the enthalpies of sublimation. A conformational analysis of lactides was performed, and the most stable conformations were determined. The equilibrium structures of lactides, sets of fundamental vibrations, moments of inertia, and total energies of the most stable conformers were calculated quantum-chemically at the B3LYP/6-311++G(3df,3pd) level. The G3MP2 composite method was used to estimate the enthalpies of formation of lactides in the gas phase. The thermodynamic properties of lactides in the ideal gas state were calculated over the temperature range 100–1500 K.     

Combined experimental and computational study of the thermochemistry of the fluoroaniline isomers

The standard (p degrees = 0.1 MPa) molar enthalpies of formation in the condensed phase of all the fluoroanilines, with the exception of the 2,3,5-trifluoroaniline compound, were derived from the standard molar energies of combustion in oxygen at T = 298.15 K, measured by rotating bomb combustion calorimetry. Calvet high-temperature vacuum sublimation experiments were performed to measure their enthalpies of vaporization or sublimation. These experiments allowed the determination of the standard molar enthalpies of formation in the gaseous phase and at T = 298.15 K. These values are also compared with estimates based on G3MP2B3 and BP86/6-31+G(d) computations, which have been extended also to the fluoroaniline that was not studied experimentally. The results are in close agreement with a mean deviation of approximately 3 kJ.mol-1. The largest difference between experimental and G3MP2B3 values is found for the pentafluoroaniline (-7.0 kJ.mol-1). For the three monofluoroanilines, the composite approach has been used also to compute gas-phase acidities, electron and proton affinities, ionization enthalpies and N-H bond dissociation enthalpies. The computed values compare well with available experimental results supporting the new computed data.     

Structure-energy relationships in unsaturated esters of carboxylic acids. Thermochemical measurements and ab initio calculations

Standard molar enthalpies of formation in the gaseous state of a series of alkyl 3-methylbut-2-enoates have been obtained from combustion calorimetry and results from the temperature dependence of the vapor pressure measured by the transpiration method. To verify the experimental data, we have performed ab initio calculations of all compounds. Enthalpies of formation derived from the G3MP2 method are in excellent agreement with the experimental results. Quantitative analysis of strain effects in alkyl 3-methylbut-2-enoates was discussed in terms of deviations of deltafH degrees m(g) from the group additivity rules. Energetics of the cis-trans isomerization of carboxylic acid derivatives was studied using G3MP2 and DFT methods. Values of strain and cis-trans corrections derived in this work provide further improvement on the group-contribution methodology for prediction of the thermodynamic properties of compounds relevant to biodiesel.     

Ab initio and experimental thermodynamic and kinetic study of proton-assisted bond activation in gaseous hydrocarbons: deconvolution of reaction efficiencies in the case of adamantane

1) Protonation at all possible sites of adamantane (C(10)H(16)) was studied at the MP2/6-311++G(3df,2p)//MP2/6-311++G(d,p) level. This provided values of the changes in the thermodynamic state functions for these processes. Whenever direct comparison was possible, the agreement with experimental data was very good. 2) By the same means, the reaction paths linking the various species obtained in these reactions were analyzed. 3) Fourier transform ion cyclotron resonance (FT-ICR) spectroscopy was used to determine the rate constants for proton transfer from 16 protonated reference bases to adamantane in the gas phase. Also, the rate constants for the formation of ionic products in these reactions were determined. 4) The experimental reaction rates were successfully predicted and refined on the basis of a simple mechanistic model based on the reaction profiles indicated above. 5) Our results hint at the potential usefulness of this approach for mechanistic studies.