Liquid chromatographic resolution of proline and pipecolic acid derivatives on chiral stationary phases based on (+)‐(18‐crown‐6)‐2,3,11,12‐tetracarboxylic acid

Two liquid chromatographic chiral stationary phases based on (+)‐(18‐crown‐6)‐2,3,11,12‐tetracarboxylic acid were applied to the resolution of the amide derivatives of cyclic α‐amino acids including proline and pipecolic acid. Among the five amide derivatives of proline, aniline amide was resolved best on the first chiral stationary phase, which contains two N–H tethering amide groups, with the separation factor of 1.31 and the resolution of 2.60, and on the second chiral stationary phase, which contains two N–CH₃ tethering amide groups, with the separation factor of 1.57 and the resolution of 5.50. Among the five amide derivatives of pipecolic acid, 2‐naphthyl amide was resolved best on the first chiral stationary phase with the separation factor of 1.30 and the resolution of 1.75, but 1‐naphthylmethyl amide was resolved best on the second chiral stationary phase with the separation factor of 1.30 and the resolution of 2.26. In general, the second chiral stationary phase was found to be better than the first chiral stationary phase in the resolution of the amide derivatives of cyclic α‐amino acids. In this study, the second chiral stationary phase was first demonstrated to be useful for the resolution of secondary amino compounds.     

High-performance liquid chromatographic investigation of the enantioselectivity and mechanism of chiral recognition of new cholic acid-based stationary phases

Summary To elucidate the mechanism of chiral recognition of cholic acid-based stationary phases, four new cholic acid derivatives, with differently substituted carbamate or three acetoxy groups, were bonded to a hydrosilyl-modified silica gel. Their capacity to discriminate between enantiomers was evaluated in normal-phase high-performance liquid chromatography. The results were compared with those from equivalent separations on trihydroxy- and 3α-phenylcarbamate-substituted cholic acid-based bonded phases. The influence of mobile phase composition of the separation of the enantiomers of amino alcohols was shown. Different mechanisms of chiral discrimination are discussed, highlighting the influence of the nature of the carbamate on enantioselectivity.     

Facile synthesis of N-(benzyl, methyl)-lysine as a building block for site-specifically lysine monomethylated peptides

Facile, mild and efficient one-pot preparation of N^α-Fmoc-N^ε-(benzyl, methyl)-lysine, a building block for monomethylated peptide synthesis, was described. This building block was proved to be efficient for the synthesis of site-specifically monomethylated peptide. Benzyl group, which was incorporated by reductive benzylation and removed via catalytic hydrogenolysis, served as an excellent protecting group.     

Supercritical fluid chromatography as a tool for enantioselective separation; A review

Supercritical fluid chromatography (SFC) has become popular in the field of enantioselective separations. Many works have been reported during the last years. This review covers the period from 2000 till August 2013. The article is divided into three main chapters. The first one comprises a basic introduction to SFC. The authors provide a brief explanation of general principles and possibilities of this method. The advantages and drawbacks are also listed. Next part deals with chiral separation systems available in SFC, namely with the commonly used chiral stationary phases. Properties and interaction possibilities of the chiral separation systems are described. Recent theoretical papers are emphasized in this chapter. The last part of the paper gives an overview of applications of enantioselective SFC in analytical chemistry, in both analytical and preparative scales. Separation systems and conditions are summed up in tables so that they provide a helpful tool for analysts who search for a particular method of analysis.     

Applications of polymethacrylate-based monoliths in high-performance liquid chromatography

Monolithic columns were introduced in the early 1990s and have become increasingly popular as efficient stationary phases for most of the important chromatographic separation modes. Monoliths are functionally distinct from porous particle-based media in their reliance on convective mass transport. This makes resolution and capacity independent of flow rate. Monoliths also lack a void volume. This eliminates eddy dispersion and permits high-resolution separations with extremely short flow paths. The analytical value of these features is the subject of recent reviews. Nowadays, among other types of rigid macroporous monoliths, the polymethacrylate-based materials are the largest and most examined class of these sorbents. In this review, the applications of polymethacrylate-based monolithic columns are summarized for the separation, purification and analysis of low and high molecular mass compounds in the different HPLC formats, including micro- and large-scale HPLC modes.     

Review of the applications of different analytical techniques for coxibs research

An extensive survey of the literature published in analytical and pharmaceutical chemistry journals has been conducted and analytical methods which were developed and used for the determination of some of the COX-2 inhibitors, a subclass of non-steroidal anti-inflammatory drugs (NSAIDs) in bulk drugs, formulations, and biological fluids have been reviewed. This review covers the time period from 1999 to present, during which over 140 analytical procedures including chromatographic, spectrometric, electrophoretic and voltammetric techniques were reported. Presented applications concern analysis of coxibs from pharmaceutical formulations and biological samples.     

Synthesis of reversible cyclic peptides

A novel approach for the synthesis of cyclic peptides that can exist in either linear or cyclized conformations is described. Synthesis of the peptides was achieved via a modified solid phase methodology. The reversible linear/cyclized (i.e., open/closed) states are controlled via the reduction/oxidation of a disulfide bond incorporated into the backbone of the peptide chain.     

Chiral recognition by enantioselective liquid chromatography: Mechanisms and modern chiral stationary phases

An overview of the state-of-the-art in LC enantiomer separation is presented. This tutorial review is mainly focused on mechanisms of chiral recognition and enantiomer distinction of popular chiral selectors and corresponding chiral stationary phases including discussions of thermodynamics, additivity principle of binding increments, site-selective thermodynamics, extrathermodynamic approaches, methods employed for the investigation of dominating intermolecular interactions and complex structures such as spectroscopic methods (IR, NMR), X-ray diffraction and computational methods. Modern chiral stationary phases are discussed with particular focus on those that are commercially available and broadly used. It is attempted to provide the reader with vivid images of molecular recognition mechanisms of selected chiral selector–selectand pairs on basis of solid-state X-ray crystal structures and simulated computer models, respectively. Such snapshot images illustrated in this communication unfortunately cannot account for the molecular dynamics of the real world, but are supposed to be helpful for the understanding. The exploding number of papers about applications of various chiral stationary phases in numerous fields of enantiomer separations is not covered systematically.     

Review of recent advances in the preparation of organic polymer monoliths for liquid chromatography of large molecules

In recent years the use of monolithic polymers in separation science has greatly increased due to the advantages these materials present over particle-based stationary phases, such as their relative ease of preparation and good permeability. For these reasons, these materials present high potential as stationary phases for the separation and purification of large molecules such as proteins, peptides, nucleic acids and cells. An example of this is the wide range of commercial available polymer-based monolithic columns now present in the market.     

Lipid analysis by thin-layer chromatography--a review of the current state

High-performance thin-layer chromatography (HPTLC) is a widely used, fast and relatively inexpensive method of separating complex mixtures. It is particularly useful for smaller, apolar compounds and offers some advantages over HPLC. This review gives an overview about the special features as well as the problems that have to be considered upon the HPTLC analysis of lipids. The term "lipids" is used here in a broad sense and comprises fatty acids and their derivatives as well as substances related biosynthetically or functionally to these compounds. After a short introduction regarding the stationary phases and the methods how lipids can be visualized on an HPTLC plate, the individual lipid classes will be discussed and the most suitable solvent systems for their separation indicated. The focus will be on lipids that are most abundant in biological systems, i.e. cholesterol and its derivates, glycerides, sphingo- and glycolipids as well as phospholipids. Finally, a nowadays very important topic, the combination between HPTLC and mass spectrometric (MS) detection methods will be discussed. It will be shown that this is a very powerful method to investigate the identities of the HPTLC spots in more detail than by the use of common staining methods. Future aspects of HPTLC in the lipid field will be also discussed.     

Separation of fluorinated amino acids and oligopeptides from their non-fluorinated counterparts using high-performance liquid chromatography

Chromatographic conditions for the separation of fluorinated amino acids and oligopeptides from their non-fluorinated counterparts were explored. The separation of six pairs of analytes, including both aromatic and aliphatic fluorocarbons, was investigated at various temperatures using both hydrocarbon and fluorocarbon columns and eluents. Our results show that when hydrocarbon eluents are used, fluorocarbon column provides better separation of fluorinated amino acids or oligopeptides from their non-fluorinated counterparts; when fluorocarbon eluents are used, hydrocarbon column provides better separation of fluorinated amino acids or oligopeptides from their non-fluorinated counterparts. These chromatographic behaviors reflect the fluorophilicity possessed by fluorinated amino acids and oligopeptides.     

Application of carbon-based nanomaterials in sample preparation: A review

In this paper, a broad overview on the applications of different carbon-based nanomaterials, including nanodiamonds, fullerenes, carbon nanotubes, graphene, carbon nanofibers, carbon nanocones-disks and nanohorns, as well as their functionalized forms, in sample preparation is provided. Particular attention has been paid to graphene because many papers regarding its application in this research field are becoming available. The distinctive properties, derivatization methods and application techniques of these materials were summarized and compared. According to their research status and perspective, these nanomaterials were classified in four groups (I: graphene and carbon nanotubes; II: carbon nanofibers; III: fullerenes; and IV: nanodiamonds, carbon nanocones/disks and carbon nanohorns) and characteristics and future trends of every group were discussed.     

Production of monoclonal antibodies against hop-derived (Humulus lupulus L.) prenylflavonoids and the development of immunoassays

Monoclonal antibodies against the hop-derived prenylated chalcone xanthohumol (X) and the prenylated flavonoids isoxanthohumol (IX) and 8-prenylnaringenin (8-PN) were developed. Carboxylic acid haptens of X, IX and 8-PN were synthesized by linking a spacer to their C4′-OH group followed by subsequent coupling to bovine serum albumin (BSA) to form conjugates that were employed as immunogens in BALB/c mice to raise antibodies. The monoclonal antibodies that were secreted from the established hybridoma cell lines proved, in cross-reactivity studies, to possess highly specific binding capacities in an optimized competitive indirect ELISA. The immunoassays make use of immunogen-coated microtiterplates and a peroxidase-labeled anti-mouse IgG₁ secondary antibody with ABTS as a chromogenic substrate. For X the IC₅₀ value derived from the standard curve was 62.91 ng mL⁻¹, and for both IX and 8-PN 37.15 ng mL⁻¹. The assay was validated for the quantitative analysis of X, IX and 8-PN in urine and serum. A simple sample pretreatment procedure using a diethyl ether extraction was optimized and the recoveries and matrix effects were assessed. The validity of the established assay was tested and mean inter- and intra-assay variations in urine were 2.32% and 1.91%, respectively for X, 6.24% and 2.39%, respectively for IX and 7.18% and 0.74%, respectively for 8-PN. In serum, the mean inter- and intra-assay variations were 8.90% and 1.37%, respectively for X, 6.13% and 1.57%, respectively for IX and 6.13% and 2.43%, respectively for 8-PN. Furthermore, the method demonstrated excellent accuracy and significant correlation with measurements by an established and validated HPLC-MS method.     

Common methods for the chiral determination of amphetamine and related compounds I. Gas, liquid and thin-layer chromatography

This article reviews the most common, useful methods for the chiral determination of amphetamine (AM) and AM-derived designer drugs in different of matrix, including blood, hair, urine, medicaments or standard solutions, taking into consideration articles published in the past 15 years. We consider chromatographic methods (e.g., gas, liquid, high-performance liquid, and thin layer). We describe several types of chiral derivatization reagent, mobile-phase additive and chiral stationary phase commonly used in the chromatographic methods. Tables summarize basic information about conditions (e.g., type of column and mobile phase), detection mode and reference data for each procedure.     

N-[Chloro(dimethylamino)methylene]-N-methylmethanaminium chloride (TMUCl Cl), the reagent of choice for the solid-phase synthesis of anilides

An effective solid-phase preparation of anilides from supported carboxylic acids is described by their activation as the corresponding acid chlorides with TMUCl Cl.     

Novel liquid chromatography/mass spectrometry-based approaches for the determination of glyphosate and related compounds: A review

Although glyphosate (Gly) is one of the most widely used agrochemicals, it is also of the most difficult to measure. Gly, its metabolites, and related compounds cannot be sought within the scope of multi-residue methods. Specific so-called single-residue methods are used instead. Liquid chromatography-mass spectrometry (LC-MS) is currently the most widely used technique for determining Gly and its metabolites. This review addresses the different LC-MS-based methods proposed for the determination of Gly and related species in food and environment matrices. Sample preparation (food and environment), as well as their determination based in novel liquid chromatography/mass spectrometry approaches including different specific stationary phases are presented and the specific analytical challenges, strengths and drawbacks are critically discussed.     

Application of HPLC to measure vanadium in environmental,biological and clinical matrices

Vanadate and vanadium compounds exist in many environmental, biological and clinical matrices, and despite the need only limited progress has been made on the analysis of vanadium compounds. The vanadium coordination chemistry of different oxidation states is known, and the result of the characterization and speciation analysis depends on the subsequent chemistry and the methods of analysis. Many studies have used a range of methods for the characterization and determination of metal ions in a variety of materials. One successful technique is high performance liquid chromatography (HPLC) that has been used mainly for measuring total vanadium level and metal speciation. Some cases have been reported where complexes of different oxidation states of vanadium have been separated by HPLC. Specifically reversed phase (RP) HPLC has frequently been used for the measurement of vanadium. Other HPLC methods such as normal phase, anion-exchange, cation-exchange, size exclusion and other RP-HPLC modes such as, ion-pair and micellar have been used to separate selected vanadium compounds. We will present a review that summarizes and critically analyzes the reported methods for analysis of vanadium salts and vanadium compounds in different sample matrices. We will compare various HPLC methods and modes including sample preparation, chelating reagents, mobile phase and detection methods. The comparison will allow us to identify the best analytical HPLC method and mode for measuring vanadium levels and what information such methods provide with regard to speciation and quantitation of the vanadium compounds.