Raman and infrared spectra, conformational stability, barriers to internal rotation, vibrational assignment, and ab initio calculations of 3-methyl-3-butenenitrile

The Raman (3500-30 cm⁻¹) spectra of liquid and solid and the infrared (3500-40 cm⁻¹) spectra of gaseous and solid 3-methyl-3-butenenitrile, CH₂C(CH₃)CH₂CN, have been recorded. Both cis and gauche conformers have been identified in the fluid phases but only the cis form remains in the solid. Variable temperature (−55 to −100 °C) studies of the infrared spectra of the sample dissolved in liquid xenon have been carried out. From these data, the enthalpy difference has been determined to be 163±16 cm⁻¹ (1.20±0.19 kJ mol⁻¹), with the cis conformer the more stable rotamer. It is estimated that there is 48±2% of the gauche conformer present at  25°C. A complete vibrational assignment is proposed for the cis conformer based on infrared band contours, relative intensities, depolarization ratios and group frequencies. Several of the fundamentals for the gauche conformer have also been identified. The vibrational assignments are supported by normal coordinate calculations utilizing ab initio force constants. Complete equilibrium geometries have been obtained for both rotamers by ab initio calculations employing the 6-31G(d), 6-311G(d,p), 6-311+G(d,p) and 6-311+G(2d,2p) basis sets at the levels of restricted Hartree-Fock (HF) and/or Møller-Plesset perturbation theory to the second order (MP2). Only with the 6-311G(2d,2p) and 6-311G(2df,2pd) basis sets with or without diffuse functions is the cis conformer predicted to be more stable than the gauche form. The potential energy terms for the conformational interchange have been obtained at the MP2(full)/6-311+G(2d,2p) level, and compared to those obtained from the experimental data. The results are discussed and compared to the corresponding quantities obtained for some similar molecules.     

Solid state and theoretical evaluation of β-fluoroethyl esters indicate a fluorine-ester gauche effect

Single crystal X-ray diffraction studies and a theoretical analysis indicate a preferred conformation for O-β-fluoroethyl esters, where the CF and CO(CO) bonds are gauche rather than anti to each other. The OCCF dihedral angles for three compounds and five independent structures indicate a range of only 63.4-69.6°. Evaluation of a rotational energy profile around this bond in a model system (β-fluoroethyl acetate) predicted a similar dihedral angle and the gauche conformation to be the minimum on the rotational energy profile. High level ab initio calculations measured the gauche conformer to be 0.95 kcal mol⁻¹ lower in energy than the anti conformer and application of a solvation model further increased this differential to 1.6 kcal mol⁻¹, consistent with a previous solution state (NMR) evaluation of this system.     

X-ray diffraction study on the thermal expansion behavior of cellulose Iβ and its high-temperature phase

Oriented films of cellulose prepared from algal cellulose were hydrothermally treated to convert them into highly crystalline cellulose Iβ. The lateral thermal expansion behavior of the prepared cellulose Iβ films was investigated using X-ray diffraction at temperatures from 20 to 300 °C. Cellulose Iβ was transformed into the high-temperature phase when the temperature was above 230 °C, allowing the lateral thermal expansion coefficient of cellulose Iβ and its high-temperature phase to be measured. For cellulose Iβ, the thermal expansion coefficients (TECs) of the a- and b-axes were α_a = 9.8 × 10⁻⁵ °C⁻¹ and α_b = 1.2 × 10⁻⁵ °C⁻¹, respectively. This anisotropic thermal expansion behavior in the lateral direction is ascribed to the crystal structure and to the hydrogen-bonding system of cellulose Iβ. For the high-temperature phase, the anisotropy was more conspicuous, and the TECs of the a- and b-axes were α_a = 19.8 × 10⁻⁵ °C⁻¹ and α_b = −1.6 × 10⁻⁵ °C⁻¹, respectively. Synchrotron X-ray fiber diffraction diagrams of the high-temperature phase were also recorded at 250 °C. The cellulose high-temperature phase is composed of a two-chain monoclinic unit cell, a = 0.819 nm, b = 0.818 nm, c (fiber repeat) = 1.037 nm, and γ = 96.4°, with space group = P2₁. The volume of this cell is 4.6% larger than that of cellulose Iβ at 30 °C.     

Bis(trifluoromethyl)dicarbonate, CF3OC(O)OC(O)OCF3

The synthesis of the new compound, bis(trifluoromethyl)dicarbonate, CF₃OC(O)OC(O)OCF₃, is carried out by reduction of bis(trifluoromethyl)trioxidicarbonate with excess of CO at 0 °C. The product is characterized by IR, Raman, ¹³C and ¹⁹F NMR spectroscopy and its properties are compared with those of the other members of the series CF₃OC(O)O_xC(O)OCF₃, x = 0-3. Single crystals are grown at −25 °C and the X-ray diffraction analysis shows the packing of syn-syn rotamers exhibiting C₂ symmetry. DFT calculations predict this rotamer as the most stable one and also structural and vibrational data are predicted reasonably well.     

Gas phase structure and conformational properties of trifluoroacetic anhydride, CF3C(O)OC(O)CF3

The geometric structure of trifluoroacetic anhydride, CF₃C(O)OC(O)CF₃, has been studied by gas electron diffraction (GED) and quantum chemical calculations (MP2 and B3LYP with 6-31G^* basis sets). The GED analysis results in a single conformer with synperiplanar orientation of the two CO bonds. This analysis, however, cannot discriminate between a planar equilibrium structure (C_2v symmetry) with large amplitude torsional motions around the OC bonds and a nonplanar equilibrium structure (C₂ symmetry) with a low barrier at the planar arrangement. An effective dihedral angle φ(COCO=18(4)° is obtained. Both quantum chemical methods predict a nonplanar equilibrium structure of C₂ symmetry and φ(COCO)=16.5° and 13.9°, respectively.     

La3TaO7 derivatives with Weberite structure type: Possible electrolytes for solid oxide fuel cells and high temperature electrolysers

In this study, with the aim to enhance the ionic conduction of known structures by defect chemistry, the La₂O₃-Ta₂O₅ system was considered with a focus on the La₃TaO₇ phase whose structure is of Weberite type. In order to predict possible preferential substitution sites and substitution elements, atomistic simulation was used as a first approach. A solid solution La_3−xSr_xTaO_7−x/2 was confirmed by X-ray diffraction and Raman spectroscopy; it extends for a substitution ratio up to x = 0.15. Whereas La₃TaO₇ is a poor oxide ion conductor (σ_700 °C = 2 × 10⁻⁵S.cm⁻¹), at 700 °C, its ionic conductivity is increased by more than one order of magnitude when 3.3% molar strontium is introduced in the structure (σ_700 °C = 2 × 10⁻⁴S.cm⁻¹).     

Preparation and thermal properties of diglycidylether sulfone epoxy

A diglycidylether sulfone monomer (sulfone type epoxy monomer, SEP) was prepared from bis(4-hydroxyphenyl) sulfone (SDOL) and epichlorohydrin without any NaOH or KOH as basic catalyst. FT-IR, ¹H NMR, ¹³C NMR and mass spectroscopic instruments were utilized to determine the structure of the SEP monomer. The cured SEP epoxy material exhibited not only a higher T_g (163.81 °C) but also a higher T_g than pristine DGEBA (from 111.25 °C to 139.17 °C) when the SEP monomer moiety had been introduced into the DGEBA system. The thermal stability of cured epoxy herein was investigated by thermogravimetric analysis (TGA). The results demonstrated that the sulfone group of the cured SEP material decomposed at lower temperatures and formed thermally stable sulfate compounds, improving char yield and enhancing resistance against thermal oxidation. Additionally, the IPDT and char yield of the cured SEP epoxy (IPDT = 1455.75, char yield = 39.67%) exceeded those of conventional DGEBA epoxy (IPDT = 667.27, char yield = 16.25%).     

Synthesis, crystal structure and thermal behavior of Sr3B2SiO8 borosilicate

Single crystals of Sr₃B₂SiO₈ were obtained by solid-state reaction of stoichiometric mixture at 1200 °C. The crystal structure of the compound has been solved by direct methods and refined to R1=0.064 (wR=0.133). It is orthorhombic, Pnma, a=12.361(4), b=3.927(1), c=5.419(1) Å, V=263.05(11) Å³. The structure contains zigzag pseudo-chains running along the b axis and built up from corner sharing (Si,B)−O polyhedra. Boron and silicon are statistically distributed over one site with their coordination strongly disordered. Sr atoms are located between the chains providing three-dimensional linkage of the structure.The formation of Sr₃B₂SiO₈ has been studied using annealing series in air at 900-1200 °C. According powder XRD, the probe contains pure Sr₃B₂SiO₈ over 1100 °C. The compound is not stable below 900 °C. In the pseudobinary Sr₂B₂O₅-Sr₃B₂SiO₈ system a new series of solid solutions Sr_3−xB₂Si_1−xO_8−3x (x=0-0.9) have been crystallized from melt. The thermal behavior of Sr₃B₂SiO₈ was investigated using powder high-temperature X-ray diffraction (HTXRD) in the temperature range 20-900 °C. The anisotropic character of thermal expansion has been observed: α_a= −1.3, α_b=23.5, α_c=13.9, and α_V=36.1×10⁻⁶ °C⁻¹ (25 °C); α_a= −1.3, α_b=23.2, α_c=5.2, and α_V=27.1×10⁻⁶ °C⁻¹ (650 °C). Maximal thermal expansion of the structure along of the chain direction [0 1 0] is caused by the partial straightening of chain zigzag. Hinge mechanism of thermal expansion is discussed.     

The rotational spectrum of the cyclopentadienylallylnickel complex

The rotational spectrum of cyclopentadienylallylnickel, C₃H₅NiC₅H₅, has been studied using a pulsed molecular beam Fourier transform microwave spectrometer. Twelve a-type transitions were analyzed to obtain rotational and centrifugal distortion constants for the parent C₃H₅⁵⁸NiC₅H₅ complex. The measured rotational constant A = 3107.603(93) MHz is about 160.0 MHz larger than the predicted DFT value, providing evidence for possible fluxional motion in the complex. The large distortion constants, on the order of 100 kHz, provide further evidence for fluxional motion. The experimental constants B = 1302.38(22) and C = 1276.40(15) MHz are in good agreement with the DFT calculated values and confirm the η³-bonding of the allyl ligand to the Ni–C₅H₅ moiety. DFT calculations provide a V₅ barrier for internal rotation about the Ni–C₅H₅ axis of 53 cm⁻¹, with the lowest energy conformation having the central allyl c-atom eclipsed with respect to two C₅H₅ carbon atoms. Several additional rotational lines, possibly those of an exited torsional state, were observed but not assigned.     

New members of ternary rare-earth metal boride carbides containing finite boron-carbon chains: RE25B14C26 (RE=Pr, Nd) and Nd25B12C28

New ternary rare-earth metal boride carbides RE₂₅B₁₄C₂₆ (RE=Pr, Nd) and Nd₂₅B₁₂C₂₈ were synthesized by co-melting the elements. Nd₂₅B₁₂C₂₈ is stable up to 1440 K. RE₂₅B₁₄C₂₆ (RE=Pr, Nd) exist above 1270 K. The crystal structures were investigated by means of single-crystal X-ray diffraction. Nd₂₅B₁₂C₂₈: space group P, a=8.3209(7) Å, b=8.3231(6) Å, c=29.888(2) Å, α=83.730(9)°, β=83.294(9)°, γ=89.764(9)°. Pr₂₅B₁₄C₂₆: space group P2₁/c, a=8.4243(5) Å, b=8.4095(6) Å, c=30.828(1) Å, β=105.879(4)°, V=2100.6(2) Å³, (R1=0.048 (wR2=0.088) from 2961 reflections with I_o>2σ(I_o)); for Nd₂₅B₁₄C₂₆ space group P2₁/c, Z=2, a=8.3404(6) Å, b=8.3096(6) Å, c=30.599(2) Å, β=106.065(1)°. Their structures consist of a three-dimensional framework of rare-earth metal atoms resulting from the stacking of slightly corrugated and distorted square nets, leading to cavities filled with cumulene-like molecules [B₂C₄]⁶⁻ and [B₃C₃]⁷⁻, nearly linear [BC₂]⁵⁻ and bent [BC₂]⁷⁻ units and isolated carbon atoms. Structural and theoretical analysis suggests the ionic formulation for RE₂₅B₁₄C₂₆: (RE³⁺)₂₅[B₂C₄]⁶⁻([B₃C₃]⁷⁻)₂([BC₂]⁵⁻)₄([BC₂]⁷⁻)₂(C⁴⁻)₄·5e⁻ and for Nd₂₅B₁₂C₂₈: (Nd³⁺)₂₅([B₂C₄]⁶⁻)₃([BC₂]⁵⁻)₄([BC₂]⁷⁻)₂(C⁴⁻)₄·7e⁻. Accordingly, extended Hückel tight-binding calculations indicate that the compounds are metallic in character.     

Heat capacity, enthalpy and entropy of ternary bismuth tantalum oxides

Heat capacity and enthalpy increments of ternary bismuth tantalum oxides Bi₄Ta₂O₁₁, Bi₇Ta₃O₁₈ and Bi₃TaO₇ were measured by the relaxation time method (2-280 K), DSC (265-353 K) and drop calorimetry (622-1322 K). Temperature dependencies of the molar heat capacity in the form C_pm=445.8+0.005451T−7.489×10⁶/T² J K⁻¹ mol⁻¹, C_pm=699.0+0.05276T−9.956×10⁶/T² J K⁻¹ mol⁻¹ and C_pm=251.6+0.06705T−3.237×10⁶/T² J K⁻¹ mol⁻¹ for Bi₃TaO₇, Bi₄Ta₂O₁₁ and for Bi₇Ta₃O₁₈, respectively, were derived by the least-squares method from the experimental data. The molar entropies at 298.15 K, S°_m(298.15 K)=449.6±2.3 J K⁻¹ mol⁻¹ for Bi₄Ta₂O₁₁, S°_m(298.15 K)=743.0±3.8 J K⁻¹ mol⁻¹ for Bi₇Ta₃O₁₈ and S°_m(298.15 K)=304.3±1.6 J K⁻¹ mol⁻¹ for Bi₃TaO₇, were evaluated from the low-temperature heat capacity measurements.     

Infrared and Raman spectra, conformational stability and vibrational assignment of 1-chloro-1-silacyclopentane

Infrared and Raman spectra (3500-60 cm⁻¹) of gas and/or liquid and solid 1-chloro-1-silacyclopentane (c-C₄H₈SiClH) have been recorded and the vibrational data indicate the presence of a single conformer with no symmetry which is consistent with the twisted form. Ab initio calculations with a variety of basis sets up to MP2(full)/aug-cc-pVTZ predict the envelope-axial and envelope-equatorial conformers are saddle points with nearly the same energies but much lower in energy than the planar conformer. Density functional theory calculations by the B3LYP method predicts slightly lower energies for the two envelope forms and considerably lower for the planar form. By utilizing the MP2(full)/6-31G(d) calculations the force constants, frequencies, infrared intensities, band contours, Raman activities, and depolarization values have been obtained to support the vibrational assignment. Estimated r₀ structural parameters have been obtained from adjusted MP2(full)/6-311 + G(d, p) calculations. These experimental and theoretical results are compared to the corresponding quantities of some other five-membered rings.     

Thermodynamic properties of BaCeO3 and BaZrO3 at low temperatures

Specific heat capacities (C_p) of polycrystalline samples of BaCeO₃ and BaZrO₃ have been measured from about 1.6 K up to room temperature by means of adiabatic calorimetry. We provide corrected experimental data for the heat capacity of BaCeO₃ in the range T < 10 K and, for the first time, contribute experimental data below 53 K for BaZrO₃. Applying Debye's T³-law for T → 0 K, thermodynamic functions as molar entropy and enthalpy are derived by integration. We obtain C_p = 114.8 (±1.0) J mol⁻¹ K⁻¹, S° = 145.8 (±0.7) J mol⁻¹ K⁻¹ for BaCeO₃ and C_p = 107.0 (±1.0) J mol⁻¹ K⁻¹, S° = 125.5 (±0.6) J mol⁻¹ K⁻¹ for BaZrO₃ at 298.15 K. These results are in overall agreement with previously reported studies but slightly deviating, in both cases. Evaluations of C_p(T) yield Debye temperatures and identify deviations from the simple Debye-theory due to extra vibrational modes as well as anharmonicity. The anharmonicity turns out to be more pronounced at elevated temperatures for BaCeO₃. The characteristic Debye temperatures determined at T = 0 K are Θ₀ = 365 (±6) K for BaCeO₃ and Θ₀ = 402 (±9) K for BaZrO₃.     

Investigation of the quasi-ternary system LaMnO3-LaCoO3-“LaCuO3”—I: the series La(Mn0.5Co0.5)1−xCuxO3−δ

The La(Mn_0.5Co_0.5)_1−xCu_xO_3−δ series with x=0, 0.05, 0.1, 0.2, 0.4, 0.6, 0.8 and 1 was synthesized by the Pechini method to obtain insight into the phase formation in the quasi-ternary LaMnO₃-LaCoO₃-“LaCuO₃” system caused by the instability of LaCuO₃ under ambient conditions. After sintering at 1100°C some remarkable results were obtained: LaMn_0.3Co_0.3Cu_0.4O_3−δ crystallized as a single phase in the orthorhombic perovskite structure typical of LaCuO₃. Among the synthesized compositions this compound showed the highest electrical conductivity in air at 800°C (155 S cm⁻¹) and also the highest thermal expansion coefficient (α_30−800°C=15.4×10⁻⁶ K⁻¹). The LaCuO_3−δ composition also crystallized as a single phase but in a monoclinic structure although previous investigations have shown that other phases are preferably formed after sintering at 1100°C. The electrical conductivity and thermal expansion coefficient were the lowest within the series of compositions, i.e. 9.4 S cm⁻¹ and 11.9×10⁻⁶ K⁻¹, respectively.     

A microwave and quantum chemical study of allyltrifluorosilane

The structural and conformational properties of allytrifluorsilane, H₂CCH-CH₂-SiF₃, have been explored by microwave (MW) spectroscopy and high-level ab initio and density functional theory quantum chemical calculations. The microwave spectrum was investigated in the 18-62 GHz spectral regions. The a-type R-branch transitions of one conformer were assigned for the ground as well as for 10 vibrationally excited states. The CC-C-Si chain of atoms in this rotamer takes an anti-clinal (‘skew’) conformation, with a dihedral angle calculated to be 111.6° from the syn-periplanar (0°) conformation. The question whether a CC-C-Si syn-periplanar conformer exists as a high-energy form in the gas phase remains open. In most of the quantum chemical calculations this conformation is predicted to be a transition state. However, in the most advanced calculations (B3LYP/aug-cc-pVTZ level of theory) the syn-periplanar conformer is predicted to be a stable rotamer that is calculated to be 6.5 kJ/mol higher in energy than the anti-clinal form. Since there is no indication in the MW spectrum for the presence of high-energy form(s), it is concluded that the anti-clinal conformer is at least 4 kJ/mol more stable than any other hypothetical rotamer.     

Simulation of the Raman spectra of zwitterionic glycine + nH2O (n = 1, 2, …, 5) by means of DFT calculations and comparison to the experimentally observed Raman spectra of glycine in aqueous medium

Raman spectra of an aqueous solution of glycine (Gly) have been recorded in the range of 400-2000 cm⁻¹. In aqueous solution, glycine molecules exist in their zwitterionic form, having two opposite charged poles, COO⁻ and NH₃⁺. The zwitterionic structure of glycine (ZGly) is stabilized by the hydrogen bond interaction of water (W) molecules. In the present report, we have optimized the ground state geometries of different hydrogen bonded complexes of [ZGly + (W)_n=1-5] in aqueous medium using DFT calculations at the B3LYP/6-311++G(d) level of theory. A comparative discussion on the structural details and binding energies (BEs) of each conformer has been also done. The theoretical Raman spectra were calculated corresponding to the most stable [ZGly + (W)_n=1-5] conformers. The theoretically simulated Raman spectra of each stable conformer were compared with experimentally observed Raman spectra to explore the number of water molecules needed for stabilizing the structure of ZGly. The theoretically simulated Raman spectra corresponding to the most stable conformer of [ZGly + (W)₅] having a BE of −22.8 kcal/mol, are matching nicely with the experimentally observed Raman spectra. Thus, on the basis of the above observations, we conclude that the conformer, [ZGly + (W)₅] is the most probable conformer in the aqueous medium. We also believe that in the conformer, [ZGly + (W)₅] the five water molecules are arranged around the ZGly in such a way that the effect of steric hindrance is less compared to the other conformers. The dipole-dipole interaction potential (DDP) is also calculated corresponding to the strongest hydrogen bond for each [ZGly + (W)_n=1-5] conformer.     

New examples of ternary rare-earth metal boride carbides containing finite boron-carbon chains: The crystal and electronic structure of RE15B6C20 (RE=Pr, Nd)

The ternary rare-earth metal boride carbides RE₁₅B₆C₂₀ (RE=Pr, Nd) were synthesized by co-melting the elements. They exist above 1270 K. Their crystal structures were determined from single-crystal X-ray diffraction data. Both crystallize in the space group P1¯, Z=1, a=8.3431(8) Å, b=9.2492(9) Å, c=8.3581(8) Å, α=84.72(1)°, β=89.68(1)°, γ =84.23(1)° (R1=0.041 (wR2=0.10) for 3291 reflections with I_o>2σ(I_o)) for Pr₁₅B₆C₂₀, and a=8.284(1) Å, b=9.228(1) Å, c=8.309(1) Å, α=84.74(1)°, β=89.68(1)°, γ=84.17(2)° (R1=0.033 (wR2=0.049) for 2970 reflections with I_o>2σ(I_o)) for Nd₁₅B₆C₂₀. Their structure consists of a three-dimensional framework of rare-earth metal atoms resulting from the stacking of slightly corrugated and distorted square nets, leading to cavities filled with unprecedented B₂C₄ finite chains, disordered C₃ entities and isolated carbon atoms, respectively. Structural and theoretical analyses suggest the ionic formulation (RE³⁺)₁₅([B₂C₄]⁶⁻)₃([C₃]⁴⁻)₂(C⁴⁻)₂·11ē. Accordingly, density functional theory calculations indicate that the compounds are metallic. Both structural arguments as well as energy calculations on different boron vs. carbon distributions in the B₂C₄ chains support the presence of a CBCCBC unit. Pr₁₅B₆C₁₈ exhibits antiferromagnetic order at T_N=7.9 K, followed by a meta-magnetic transition above a critical external field B>0.03 T. On the other hand, Nd₁₅B₆C₁₈ is a ferromagnet below T_C≈40 K.     

Phase stability of BSCF in low oxygen partial pressures

In situ X-ray diffraction has been used to investigate the phase stability of barium strontium cobalt iron oxide (BSCF) with the formula Ba_0.5Sr_0.5Fe_1−xCo_xO_3−δ (x=0, 0.2, 0.4, 0.6, 0.8, and 1). The thermal decomposition processes in both low partial pressures of oxygen (air −10⁻⁵ atm pO₂) and in reducing conditions have been detailed. BSCF manifests excellent stability down to 10⁻⁵ atm pO₂; however, it decomposes through a complex series of oxides under reducing conditions. Increasing the cobalt content results in a decrease in the temperature range of stability of the material under 4% H₂ in N₂, with the initial decomposition taking place at 375, 425, 550, 600, 650 and 675 °C, for x=1, 0.8, 0.6, 0.4, 0.2 and 0, respectively. Further, the thermal expansion is a strong function of the oxygen activity and Co content. The x=0, 1 end member, BSC, undergoes a phase transition from rhombohedral to cubic symmetry at ∼800 °C under 10⁻⁵ atm pO₂, resulting in an ideal perovskite with a=3.9892(3) Å at room temperature.     

Synthesis and characterization of a redox- and light-sensitive MRI contrast agent

A redox- and light-sensitive, T₁-weighted magnetic resonance imaging (MRI) contrast agent, which tethers a spiropyran (SP)/merocyanine (MC) motif to a Gd-DO3A moiety was synthesized and characterized. When in the dark, the probe is in its MC form, which has an r₁ relaxivity of 2.51 m M⁻¹ s⁻¹ (60 MHz, 37 °C). After irradiation with visible light or mixing with NADH, the probe experiences an isomerization and the r₁ relaxivity decreased 18% and 26%, respectively. Additionally, the signal intensity in MRI showed an observable decrease after the compound was mixed with NADH.     

Thin Pd–23%Ag/stainless steel composite membranes: Long-term stability,life-time estimation and post-process characterisation

The long-term stability of Pd–23%Ag/stainless steel composite membranes has been examined in H₂/N₂ mixtures as a function of both temperature and feed pressure. During continuous operation, the membrane shows a good stability at 400 °C while the N₂ leakage increases very slowly at a temperature of 450 °C (P_feed = 10 bar). After 100 days of operation (P_feed = 5–20 bar, T = 350–450 °C), the N₂ permeance equals 7.0 × 10⁻⁹ mol m⁻² s⁻¹ Pa⁻¹, which indicates that the H₂/N₂ permselectivity still lies around 500, based on a H₂ permeance equal to 3.0 × 10⁻⁶ mol m⁻² s⁻¹ Pa⁻¹. Despite the generation of small pinholes, a membrane life-time of several (2–3) years (T ≤ 425 °C) is estimated for the experimental conditions employed based on long-term stability tests over 100 days. Post-process characterisation shows a considerable grain growth and micro-strain relaxation in the Pd–23%Ag membrane after the prolonged permeation experiment. Changes in surface area are relatively small. In addition, segregation of Ag to the membrane surfaces is observed. The formation of pinholes is identified as the main source for the increased N₂ leakage during testing at higher temperature.