A simple procedure for the esterification of alcohols with sodium carboxylate salts using 1-tosylimidazole (TsIm)

An efficient and selective method for esterification of alcohols using N-(p-toluenesulfonyl)imidazole (TsIm) is described. In this method, alcohols are refluxed with a mixture of RCO₂Na (R: alkyl and aryl), TsIm, and triethylamine in the presence of catalytic amounts of tetra-n-butylammonium iodide (TBAI) in DMF to afford the corresponding esters in good yields. This methodology is highly efficient for various structurally diverse alcohols with selectivity for ROH: 1° > 2° > 3°.     

A simple one-pot procedure for the direct conversion of alcohols into azides using TsIm

A facile and efficient method for one-pot conversion of alcohols into azides using N-(p-toluenesulfonyl)imidazole (TsIm) is described. In this method, alcohols are refluxed with a mixture of NaN₃, TsIm and triethylamine in the presence of catalytic amounts of tetra-n-butylammonium iodide (TBAI) in DMF affording the corresponding alkyl azides in good yields. This methodology is highly efficient for various structurally diverse alcohols with selectivity for ROH: 1° > 2° > 3°.     

A simple one-pot procedure for the direct conversion of alcohols into alkyl nitriles using TsIm

A convenient and efficient one-pot preparation of nitriles from alcohols using N-(p-toluenesulfonyl)imidazole (TsIm) is described. In this method, treatment of alcohols with a mixture of NaCN, TsIm and triethylamine in the presence of catalytic amounts of tetra-n-butylammonium iodide (TBAI) in refluxing DMF furnishes the corresponding alkyl nitriles in good yields. This methodology is highly efficient for various structurally diverse alcohols with selectivity for ROH: 1° > 2° > 3°.     

Gold(I)-catalyzed direct C-H arylation of pyrazine and pyridine with aryl bromides

An efficient procedure for the direct C-H arylation of electron-poor aromatics such as pyrazine and pyridine with aryl bomides is described. In the presence of catalytic amount of Cy₃PAuCl and with the use of t-BuOK as base, pyrazine undergoes the direct C-H arylation with aryl bromides at 100 °C, and the yields of the arylated products depend on the nature of aryl bromides. In the cases of electron-rich aryl bromides used, the arylated pyrazines can be obtained in good to high yields. For electron-poor aryl bromides, the addition of AgBF₄ is the crucial point to accelerate the coupling reaction to give the arylated products in moderate yields. Pyridine also reacts with electron-rich aryl bromides catalyzed by Cy₃PAuCl to give a mixture of arylated regioisomers in moderate yield. However, in order to realize the direct C-H arylation of pyridine with electron-poor aryl bromides, the addition of silver salt as additive and a milder reaction temperature (60 °C) are required.     

Synthesis of 5-alkyl-5-aryl-1-pyrroline N-oxides from 1-aryl-substituted nitroalkanes and acrolein via Michael addition and nitro reductive cyclization

A general method for accessing 5-alkyl-5-aryl-1-pyrroline N-oxides (AAPOs) has been established using readily available aryl bromides, nitroalkanes, and acrolein as the starting materials. The palladium-catalyzed arylation of nitroalkanes gave the 1-aryl-substituted nitroalkanes, which underwent the Et₃N-catalyzed Michael addition with acrolein at room temperature to afford the 4-aryl-4-nitroaldehydes. The latter were then subjected to the nitro reductive cyclization using Zn–HOAc in EtOH at 0 °C followed by warming the reaction mixture to room temperature for 24 h, furnishing the 5-alkyl-5-aryl-1-pyrroline N-oxides in good overall yields. Selected examples of 1,3-dipolar cycloaddition of the cyclic nitrones with methyl methacrylate were also described.     

Phenylethynylnaphthalic endcapped imide oligomers with reduced cure temperatures

A series of 4-(2-phenylethynyl)-1,8-naphthalic anhydride (PENA) endcapped imide oligomers with different chemical backbones and calculated number average molecular weights (Calc’d M_n) were successfully synthesized and characterized. The PENA-endcapped imide oligomers were mixtures of mono- and double-endcapped imide oligomers with polymerization degree (P_n) of 1-5 and number average molecular weights (M_n) of 2515-3851 g/mol. determined by GPC. Study on effect of chemical structures on the curing behaviors of two model compounds: PENA-m based on PENA and PEPA-m derived from 4-phenylethynylphthalic anhydride (PEPA) revealed that PENA-m showed the cure temperature of 50 °C lower than PEPA-m and the activity energy of thermal curing reaction for PENA-m was also lower than that of PEPA-m. The PENA-endcapped imide oligomers could be melt at temperatures of >250 °C with the minimum melt viscosity of 1.2-230 Pa s at 275-301 °C and the widen melt processing windows, along with 10-40 °C lower cure temperature than the PEPA-endcapped analogue.The PENA-endcapped imide oligomers could be thermally cured at 350 °C/1 h to afford the thermally cured polyimides with good combined thermal and mechanical properties including T_g of 344-397 °C (DMA), T_d of 443-513 °C, tensile strength of as high as 54.7 MPa, flexural strength of as high as 126.1 MPa and modulus of as high as 2.3 GPa, respectively.     

Preparation and properties of high performance bismaleimide resins based on 1,3,4-oxadiazole-containing monomers

In research towards high performance polymeric materials, two novel series of bismaleimide (BMI) resins based on 1,3,4-oxadiazole-containing monomers have been designed and prepared by the copolymeriziation reaction of 5-tert-butyl-1,3-bis[5-(4-maleimidophenyl)-1,3,4-oxadiazole-2-yl]benzene (Buoxd) or 4,4′-bis[5-(4-maleimidophenyl)-1,3,4-oxadiazole-2-yl]diphenyldimethylsilane (Sioxd) and 4,4′-bismaleimidodiphenylmethane (BMDM) in different feed ratios. The structures, thermal and dynamic mechanical properties of all the resulting BMI resins were carefully characterized by a combination of methods such as IR, DSC, TGA and DMA. Investigation of the copolymerization process has shown that with an increase of the weight ratio of Buoxd or Sioxd, melting transition temperature (T_m) of BMI monomer mixtures decreased and the exothermic polymerization temperature (T_p) increased. For all BMI monomer mixtures, a rapid polymerization process was observed in the early stage, as shown by the IR investigations. No glass transition was observed for the resulting BMI resins in the temperature range from 50 °C to 350 °C, indicating the formation of highly cross-linking networks. The initial thermal decomposition temperatures (T_d) of the BMI resins were in the range of 477-493 °C in nitrogen and 442-463 °C in the air. Dynamic mechanical analysis (DMA) of the composites made of the BMI resins and glass cloth showed high bending modulus not only at room temperature (E′, 1.9-5.3 GPa) but also at high temperature, e.g., 400 °C (E′, 1.7-4.4 GPa).     

Microwave-assisted arylation of rac-(E)-3-acetoxy-1,3-diphenylprop-1-ene with arylboronic acids

The palladium-catalyzed arylation of rac-(E)-3-acetoxy-1,3-diphenylprop-1-ene with arylboronic acids was studied under controlled microwave irradiation conditions. A variety of different catalysts, bases, and solvents were explored in order to achieve optimum yields in the shortest possible reaction times. The best isolated yields were obtained using Pd₂(dba)₃·CHCl₃/PPh₃ as the catalytic system, potassium phosphate monohydrate as the base, and toluene/H₂O as a solvent system. Microwave irradiation using 5 mol % of the palladium catalyst for 90 s (max. temp 170 °C) generally afforded the cross-coupling products in good to excellent yields.     

Microwave-assisted nickel(II) acetylacetonate-catalyzed arylation of aldehydes with arylboronic acids

Applying sealed vessel microwave heating at 180 °C in toluene the arylation of aromatic and aliphatic aldehydes with arylboronic acids using 1-2 mol % of Ni(acac)₂ as a catalyst can be performed efficiently within 10-30 min providing the desired diarylmethanols or benzyl alcohols in good yields.     

Conjugate addition of aromatic amines to ethenetricarboxylates

The conjugate addition of amines is considered to be a useful reaction in synthetic organic chemistry. The reaction of reactive electrophilic olefins, ethenetricarboxylates, and aromatic amines with and without catalytic Lewis acids such as ZnCl₂ and ZnBr₂ at room temperature gave amine adducts in high yields. The products were converted to α-amino acid, dl-aspartic acid derivatives. Using Lewis acids such as Sc(OTf)₃ and Zn(OTf)₂ at higher temperature (40-80 °C), the reaction of ethenetricarboxylates and N-methylaniline gave an aromatic substitution product. A catalytic enantioselective conjugate addition using a chiral Lewis acid was also investigated. For example, the reaction of 1,1-diethyl 2-tert-butyl ethenetricarboxylate with N-methylaniline in the presence of chiral bisoxazoline-Cu(II) complex in THF at −20 °C for 17 h gave an amine adduct in 91% yield and 78% ee. On the other hand, the reaction with aniline and primary aniline derivatives gave adducts with almost no ee%.     

Efficient synthesis of trisubstituted alkenes in an aqueous-organic system using a versatile and recyclable Rh/m-TPPTC catalyst

We have found that the use of [Rh(cod)OH]₂ associated with the water-soluble ligand m-TPPTC was highly efficient for the Rh-catalyzed arylation of alkynes. Aryl and alkyl alkynes were transformed to alkenes using 3 mol % rhodium catalyst and 2.5 equiv of boronic acid at 100 °C in a biphasic water/toluene system in 80-99% yield. The reaction was found to be totally regioselective for alkyl arylalkynes and alkyl silylated alkynes. The Rh/m-TPPTC system was for the first time recycled with no loss of the activity and with excellent purity of the desired alkene.     

Spectroscopic and structural studies of the 2D Mn(II) coordination polymer from a bridging Noxa, Npy bidentate ligand; tetra-n-butylammonium[5-(3-pyridyl)-1,3,4-oxadiazole-2-thiolate]

A coordination polymer {[Mn(3-pyt)₂(H₂O)₂][N(n-Bu)₄]⁺[3-pyt]⁻}_n (3) has been synthesized from the reaction of tetra-n-butylammonium[5-(3-pyridyl)-1,3,4-oxadiazole-2-thiolate] {[N(n-Bu)₄]⁺[3-pyt]⁻} and Mn(OAc)₂ · 4H₂O. The ligand and the Mn(II) complex 3 have been characterized by elemental analyses, IR, ¹H and ¹³C NMR spectroscopy, in addition 3 has also been studied crystallographically. The single crystal X-ray structure of the 3 shows that the ligand is bonded to Mn(II) via its pyridyl and oxadiazole nitrogen atoms. This bonding pattern connects the Mn(II) centres to afford an uniform two dimensional coordination frame work where the [Mn(3-pyt)₂(H₂O)₂]_n molecules are stacked in a parallel layers. The overall arrangement of molecules in crystal lattice results in open channels in which the enclosed tetra-n-butylammonium cations are stabilized by anionic oxadiazole molecules through N⁺···S⁻ ionic interactions.     

Phase equilibria on binary systems containing diethyl sulfide

Isothermal vapor-liquid equilibrium (VLE) of the following systems was measured with a recirculation still: diethyl sulfide + ethanol at 343.15 K, diethyl sulfide + 1-propanol at 358.15 K, and diethyl sulfide + propyl acetate at 363.15 K. Diethyl sulfide + ethanol at 343.15 K and diethyl sulfide + 1-propanol at 358.15 K systems exhibit positive deviation from Raoult's law, whereas diethyl sulfide + propyl acetate at 363.15 K system exhibits only slight positive deviation from Raoult's law. A maximum pressure azeotrope was found in the systems diethyl sulfide + ethanol (x₁ = 0.372, P = 88.4 kPa, T = 343.15 K) and diethyl sulfide + 1-propanol (x₁ = 0.640, P = 96.8 kPa, T = 358.15 K). No azeotropic behavior was found in diethyl sulfide + propyl acetate system at 363.15 K. The experimental results were correlated with the Wilson model and compared to COSMO-SAC predictive model. Liquid and vapor phase compositions were determined with gas chromatography. All measured data sets passed the thermodynamic consistency tests. The activity coefficients at infinite dilution are also presented.     

Synthesis of 2,3-disubstituted benzofurans and indoles by π-Lewis acidic transition metal-catalyzed cyclization of ortho-alkynylphenyl O,O- and N,O-acetals

The PtCl₂-catalyzed cyclization reaction of ortho-alkynylphenyl acetals 1 in the presence of COD (1,5-cyclooctadiene) produces 3-(α-alkoxyalkyl)benzofurans 2 in good to high yields. For example, the reaction of acetaldehyde ethyl 2-(1-octynyl)phenyl acetal (1a), acetaldehyde ethyl 2-(cyclohexylethynyl)phenyl acetal (1c), and acetaldehyde ethyl 2-(phenylethynyl)phenyl acetal (1f) in the presence of 2 mol % of platinum(II) chloride and 8 mol % of 1,5-cycloocatadiene in toluene at 30 °C gave the corresponding 2,3-disubstituted benzofurans 2a, 2c, and 2f in 91, 94, and 88% yields, respectively. Moreover, the reaction of N-methoxymethyl-2-alkynylanilines 3 was catalyzed by PdBr₂, affording the corresponding 2,3-disubstituted indoles 4 in moderate yields. For example, the reaction of N-methoxymethyl-2-(1-pentynyl)-N-tosylaniline (3a) and N-methoxymethyl-2-(phenylethynyl)-N-tosylaniline (3b) in the presence of 10 mol % of PdBr₂ in toluene at 80 °C gave 3-methoxymethyl-2-propyl-1-tosylindole (4a) and 3-methoxymethyl-2-phenyl-1-tosylindole (4b) in 33 and 33% yields, respectively.     

Lipase-catalyzed synthesis of biodegradable copolymer containing malic acid units in solvent-free system

This work is to explore a new route to synthesize functional polyesters bearing pendant hydroxyl groups. The approach is via biocatalyzed direct polycondensation. l-Malic acid, adipic acid and 1,8-octanediol were used as comonomers and lipase Novozym 435 as a biocatalyst. ¹H NMR studies on the structure of the products indicated that Novozym 435 was strictly selective for esterification of l-malic acid carboxyl groups while leaving the hydroxyl groups unchanged. The influences of the monomer feeding ratio, reaction temperature, and reaction time on the molecular weight of the products were investigated. By varying l-malic acid feed ratio in the total monomers from 0 to 20 mol%, the molecular weight (M_W) of the product changed from 9.5 kilo Dalton (kD) to 4.7 kD while reaction was held at 70 °C for 48 h. The maximum M_W could reach 7.4 kD at 80 °C when varying temperature between 70 and 90 °C if l-malic acid is 20 mol% and reaction time is 48 h. At 75 °C the M_W increased from 5.2 kD to 6.6 kD when reaction time was elongated from 48 h to 72 h. However, little change in M_W was observed at 80 and 85 °C when the reaction time was above 48 h. Thermal property of the copolyesters was studied by differential scanning calorimetry (DSC). Increasing the l-malic acid content in copolyesters resulted in melting temperature depression.     

Kinetics of reduction of iron oxides by H2: Part II. Low temperature reduction of magnetite

This study deals with the reduction of Fe₃O₄ by H₂ in the temperature range of 210-950 °C. Two samples of Fe₃O₄ produced at 600 and 1200 °C, designated as Fe₃O₄₍₆₀₀₎ and Fe₃O_4(1200), have been used as starting material.Reduction of Fe₃O₄₍₆₀₀₎ by H₂ is characterized by an apparent activation energy ‘E_a’ of 200, 71 and 44 kJ/mol at T < 250 °C, 250 °C < T < 390 °C and T > 390 °C, respectively. The important change of E_a at 250 °C could be attributed to the removal of hydroxyl group and/or point defects of magnetite. This is confirmed during the reduction of Fe₃O_4(1200). While transition at T ≈ 390 °C is probably due to sintering of the reaction products as revealed by SEM.In situ X-rays diffraction reduction experiments confirm the formation of stoichiometric FeO between 390 and 570 °C. At higher temperatures, non-stoichiometric wüstite is the intermediate product of the reduction of Fe₃O₄ to Fe.The physical and chemical modifications of the reduction products at about 400 °C, had been confirmed by the reduction of Fe₃O₄₍₆₀₀₎ by CO and that of Fe₃O_4(1200) by H₂. A minimum reaction rate had been observed during the reduction of Fe₃O_4(1200) at about 760 °C. Mathematical modeling of experimental data suggests that the reaction rate is controlled by diffusion and SEM observations confirm the sintering of the reaction products.Finally, one may underline that the rate of reduction of Fe₃O₄ with H₂ is systematically higher than that obtained by CO in the explored temperature range.     

RuH2(CO)(PPh3)3-catalyzed arylation of aromatic esters using arylboronates via C-H bond cleavages

The RuH₂(CO)(PPh₃)₃-catalyzed C-H functionalization of aromatic esters with 5,5-dimethyl-2-aryl-[1,3,2]dioxaborinanes (arylboronates) gave the ortho arylation products. This coupling reaction can be performed with various combinations of isopropyl benzoate derivatives and arylboronates. Introduction of CF₃ group in the aromatic ring increased the reactivity of the esters. Pinacolone effectively served as an acceptor of a hydride generated by C-H bond cleavage, and the amount of pinacolone used also affected the yield of the arylation product.     

Rapid and highly selective epoxidation of alkenes by tetrabutylammonium monopersulfate in the presence of manganese meso-tetrakis(pentafluorophenyl)porphyrin and tetrabutylammonium salts or imidazole co-catalysts

Epoxidation of various alkenes in low to high yields (29-100%) and good to excellent selectivities (75-100%) was performed with tetrabutylammonium monopersulfate in the presence of meso-tetrakis(pentafluorophenyl)porphyrin as catalyst and tetrabutylammonium acetate or fluoride or imidazole as co-catalysts in CH₂Cl₂, in less than 10 min at room temperature (∼25 °C).     

One pot Pd(OAc)2-catalysed 2,5-diarylation of imidazoles derivatives

The regioselective 2- or 5-arylation of imidazole derivatives with aryl halides using palladium catalysts has been described in recent years; whereas the arylation at both C2 and C5 carbons of imidazoles in high yields has not been performed. We found conditions allowing the access to these 2,5-diarylimidazoles via a one pot reaction. The choice of the base was found to be crucial to obtain these products in high yields. Using CsOAc as the base, DMA as the solvent and only 2 mol % of the phosphine-free Pd(OAc)₂ the catalyst, the target 2,5-diarylated imidazoles were obtained in moderate to good yields with a wide variety of aryl bromides. Substituents such as fluoro, trifluoromethyl, formyl, acetyl, propionyl, ester, nitro or nitrile on the aryl bromide were tolerated. Sterically congested aryl bromides or heteroaryl bromides can also be employed. Surprisingly the nature of the substituent at position 1 on the imidazole derivative exhibits a huge influence on the reaction.     

Enzyme assay for chitinase catalyzed hydrolysis of tetra-N-acetylchitotetraose by isothermal titration calorimetry

Isothermal titration calorimetry (ITC) has been used to observe the chitinase-catalyzed hydrolysis of tetra-N-acetylchitotetraose. Enzymatic hydrolysis of tetra-N-acetylchitotetraose by chitinase B from Serratia marcescens produces exclusively two molecules of di-N-acetylchitobiose allowing for the determination of a single glycosidic bond hydrolysis heat that was used to monitor the rate of the enzymatic reaction. The change in heat rate with respect to time (dQ/dt) was translated to the reaction rate, and the total heat produced was related to substrate concentration throughout the reaction. Reaction rates versus substrates concentration were fit to Michaelis-Menten plots, yielding a k_cat of 40.9 ± 0.5 s⁻¹ and a K_m of 54 ± 2 μM.