Fluorescent peptide-based sensors for the ratiometric detection of nanomolar concentration of heparin in aqueous solutions and in serum

New fluorescent peptide-based sensors (1–3) for monitoring heparin in serum sample were synthesized using short peptides (1∼3mer) as a receptor. The peptide-based sensors (2 and 3) showed a sensitive ratiometric response to heparin both in aqueous buffered solution (10 mM HEPES, pH 7.4) and in 2% human serum sample by increase of excimer emission of pyrene at 480 nm and concomitant decrease of monomer emission of pyrene at 376 nm, whereas the peptide-based sensor 1 showed a turn off response only by decrease of monomer emission at 376 nm. 2 and 3 exhibited excellent selectivity toward heparin among various anions and competitors of heparin including chondroitin 4-sulfate (ChS) and hyaluronic acid (HA). Peptide-based sensor 3 showed a more sensitive response to heparin than 2. The detection limit of 3 was determined as 36 pM (R² = 0.998) for heparin in aqueous solution and 204 pM (R² = 0.999) for heparin in aqueous solutions containing 2% human serum. The peptide-based sensors, 2 and 3 provided a practical and potential tool for the detection and quantification of heparin in real biological samples.     

Colorimetric and ratiometric fluorescent detection of sulfite in water via cationic surfactant-promoted addition of sulfite to α,β-unsaturated ketone

Three fluorescent probes were constructed by incorporating an α,β-unsaturated ketone to a coumarin fluorophore. The selective addition of sulfite to the alkene of TSP assisted by cetyltrimethyl ammonium bromide (CTAB) micelle can be visualized by dramatic color and ratiometric fluorescence changes. In CTAB–PBS system, the fluorescence intensity ratio at 465 nm and 592 nm (I₄₆₅/I₅₉₂) and the absorbance ratio at 390 nm and 470 nm (A₃₉₀/A₄₇₀) were linearly proportional to sulfite concentration in the range of 0.5–150 μM, and the detection limit was 0.2 μM. Good selectivity and competition of TSP1 towards sulfite over several anions and biological thiols were acquired. Probe TSP1 was used to detect sulfite in three realistic samples (mineral water, sugar and white wine) with good recovery.     

Self-assembly of a novel 2D network polymer: Syntheses, characterization, crystal structure and properties of a four-tin-nuclear 36-membered diorganotin(IV) macrocyclic carboxylate

The novel macrocyclic complex (n-Bu₂SnL)₄·2C₆H₆1 (LH₂ = naphthalene-1,4-dicarboxylic acid, C₆H₆ = benzene) has been synthesized by the reaction of di-n-butyltin oxide and rigid naphthalene-1,4-dicarboxylic acid. Single crystal X-ray diffraction analyse shows that complex 1 has a centrosymmetric tetranuclear diorganotin dicarboxylate with 36-membered macrocycle, which is formed by n-Bu₂Sn and ligand alternately linking. All four Sn atoms are hexacoordinated, and the coordination environment can be considered as a skew-trapezoidal bipyramidal with an anisobidentate coordination mode of the carboxylate groups. Luminescent property study of complex 1 has shown that the fluorescent peak was blue-shifted and the fluorescent intensity strengthened markedly compared with ligand. Pilot studies indicated that complex 1 has shown good antitumor activities. This complex 1 is likely to serve as a new model for further investigation on the structure-antitumor activity relationship.     

Hypochlorous acid turn-on boron dipyrromethene probe based on oxidation of methyl phenyl sulfide

A boron dipyrromethene (BODIPY)-based fluorometric probe, HCS, has been successfully developed for the highly sensitive and selective detection of hypochlorous acid (HOCl). The probe is based on the specific HOCl-promoted oxidation of methyl phenyl sulfide. The reaction is accompanied by a 160-fold increase in the fluorescent quantum yield (from 0.003 to 0.480). The fluorescent turn-on mechanism is accomplished by suppression of photoinduced electron transfer (PET) from the methyl phenyl sulfide group to BODIPY. The fluorescence intensity of the reaction between HOCl and HCS shows a good linearity in the HOCl concentration range 1–10 μM. The detection limit is 23.7 nM (S/N = 3). In addition, confocal fluorescence microscopy imaging using RAW264.7 macrophages demonstrates that the HCS probe could be an efficient fluorescent detector for HOCl in living cells.     

A ratiometric fluorescent probe for fluoride ion employing the excited-state intramolecular proton transfer

A ratiometric fluorescent probe 1 for fluoride ion was developed based on modulation of the excited-state intramolecular proton transfer (ESIPT) process of 2-(2′-hydroxyphenyl)benzimidazole (HPBI) through the hydroxyl group protection/deprotection reaction. The probe 1 was readily prepared by the reaction of HPBI with tert-butyldimethylsilyl chloride (TBS-Cl) and shows only fluorescence emission maximum at 360 nm. Upon treatment with fluoride in aqueous DMF solution, the TBS protective group of probe 1 was removed readily and ESIPT of the probe was switched on, which resulted in a decrease of the emission band at 360 nm and an increase of a new fluorescence peak around 454 nm. The fluorescent intensity ratio at 454 and 360 nm (I₄₅₄/I₃₆₀) increases linearly with fluoride ion concentration in the range 0.3-8.0 μmol L⁻¹ and the detection limit is 0.19 μmol L⁻¹. The proposed probe shows excellent selectivity toward fluoride ion over other common anions. The method has been successfully applied to the fluoride determination in toothpaste and tap water samples.     

A color version of the Hinsberg test: permethylated cyclodextrin and crown-appended azophenol for highly selective sensing of amines

Azophenol dyes 1-5 having the permethylated cyclodextrin and/or crown moieties have been synthesized. Compounds 1 and 2 provide critical information for discrimination among 1°-3° amines by unique color changes. Addition of 1° and 2° amines to solutions of 1 or 2 in chloroform shifts the absorbance maximum of the initial solutions from 380 nm to ∼580 nm and ∼530 nm, respectively, but no change is observed with 3° amines. The high selectivity of 1 is mainly due to H-bonding between the ammonium H atoms of the amine and oxygen atoms of the crown-6. The selectivity of 1 possessing the β-cyclodextrin moiety toward amines was higher than that of 2 possessing the α-cyclodextrin moiety. On the other hand, chloroform solutions of 3 or 4, which lack the crown ether moiety, changed from yellow (380 nm) to pink (500 nm) with the addition of 1° and 2° amines, but with no selectivity. These results indicate that the crown unit in 1 or 2 plays an important role in discriminating among the types of amines.     

Highly selective fluorescent chemosensor with red shift for cysteine in buffer solution and its bioimage: symmetrical naphthalimide aldehyde

A new fluorescent probe 1, N-butyl-4, 5-(p-aldehyde)phenyl-1,8-naphthalimide, was designed and synthesized for the determination of the cysteine (Cys). Upon addition of Cys, the emission of 1 was enhanced with about 25 nm red-shift in the emission maximum (from 455 to 480 nm), accompanied with the fluorescent color change from blue to cyan, which was attributed to the reaction of the aldehyde groups in 1 with cysteine to form very stable thiazolidines derivative. Compound 1 was highly selective for cysteine detection without the interference of other amino acids and can be used for bioimaging of Cys.     

Synthesis, characterization and luminescence study of dialkyl[1-arylmethyleneimino-2-naphthonato]gallium complexes: Crystal structure of dimethyl[1-(2-pridyl) methyleneimino-2-naphthonato]gallium

Eight dialkylgallium complexes of type R₂GaL [(M = Me, L = 1-(2-pyridyl)methyleneimino-2-naphthonato (1), M = Et, L = 1-(2-pyridyl)methyleneimino-2-naphthonato (2), M = Me, L = 1-phenylmethyleneimino-2-naphthonato (3), M = Et, L = 1-phenylmethyleneimino-2-naphthonato (4), M = Me, L = 1-(p-methoxylphenyl)methyleneimino-2-naphthonato (5), M = Me, L = 1-(3,4-dimethoxylphenyl)methyleneimino-2-naphthonato (6), M = Me, L = 1-naphthylmethyleneimino-2-naphthonato (7), M = Me, L = 1-naphthylmethyleneimino-2-naphthonato (8)) have been synthesized by reaction of trialkylgallium with appropriate 1-arylmethyleneimino-2-naphthols. The complexes have been characterized by elemental analysis, ¹H NMR, IR and mass spectrometry. Structure of dimethyl[1-(2-pyridyl)methyleneimino-2-naphthonato]gallium (1) has been determined by X-ray single crystal analysis. Ga atom is five coordinate in the structure. Photoluminescent properties have been measured. The maximum emission wavelengths are in the range of 358 and 412 nm with the intensity of 13-325 a.u. The electroluminescent properties of 3, 5, 7 and 8 have been measured. The maximum emission wavelengths are in the range of 450 and 480 nm.     

Self-assembly and aggregation of ATRP prepared amphiphilic BAB tri-block copolymers contained nonionic ethylene glycol and fluorescent 9,10-di(1-naphthalenyl)-2-vinyl-anthracene/1-vinyl-pyrene segments

Two novel amphiphilic BAB-type block copolymers, ADN-PEG3400-ADN and Py-PEG3400-Py containing deep blue and bluish-green fluorescent moieties were prepared using atom transfer radical polymerization (ATRP) (where, ADN = poly(9,10-di(1-naphthalenyl)-2-vinylanthracene), Py = poly(1-vinyl pyrene) and PEG3400 = poly(ethylene glycol) with M_n = 3400 g/mol). The GPC number averaged molecular weights (MW) of the block copolymers were M_n = 9600 and 13,800 g/mol, respectively, based on polystyrene MW standards. The PEG3400 segment has a melting temperature (T_m peak) at 64–65 °C, whereas the glass transition temperatures (T_g midpoint) of the ADN and Py segments were found to be 230 °C and 193 °C, respectively, and are similar to their respective homopolymers indicating complete microphase segregration. The photoluminescence (PL) emission of the copolymers ADN-PEG3400-ADN exhibited two maxima at 423.5 nm and 441.5 nm while Py-PEG3400-Py has a maximum at 488.5 nm. Both copolymers form individual spherical micelles with diameter from 30 to 90 nm for Py-PEG3400-Py and 40–160 nm for ADN-PEG3400-ADN. The micelles, however, transform into cross-linked pearl-necklace-like aggregates at polymer concentrations above 1000 ppm, which may be attributed to the physical cross-linking between adjacent spherical micelles caused by the PEG3400 segments.     

A multi-channel sensor based on 8-hydroxyquinoline ferrocenoate for probing Hg(II) ion

A new sensing molecule 8-hydroxyquinoline ferrocenoate (Fc-Q) which combines ferrocene and 8-hydroxyquinoline moieties was synthesized and applied as a multi-channel sensor for the detection of Hg²⁺ ion. Fc-Q can coordinate with Hg²⁺ to give colorimetric, fluorescent and electrochemical responses. Upon complexation with Hg²⁺ ion, the characteristic absorption peak is red-shifted (Δλ = 45 nm), the fluorescent intensity is quenched at 303 nm, and the oxidation peak is cathodic shifted (ΔE_1/2 = −149 mV). Quantitatively analyzed Hg²⁺ ions at the range of ppb level could be achieved by electrochemical response. For the practical application of sensing Hg²⁺ in real world water, Fc-Q modified screen-printed carbon electrodes were obtained for facile, sensitive, and on-site analysis of Hg²⁺.     

Ratiometric fluorescent and colorimetric sensors for Cu based on 4,5-disubstituted-1,8-naphthalimide and sensing cyanide via Cu displacement approach

Two 4,5-disubstituted-1,8-naphthalimide derivatives 1 and 2 were synthesized as ratiometric fluorescent and colorimetric sensors for Cu²⁺, respectively. In 100% aqueous solutions of 1, the presence of Cu²⁺ induces a strong and increasing fluorescent emission centered at 478 nm at the expense of the fluorescent emission of 1 centered at 534 nm. Compound 2 senses Cu²⁺ by means of a colorimetric (primrose yellow to pink) method with a thorough quench in emission attributed to the deprotonation of the secondary amine conjugated to the naphthalimide fluorophore. 1-Cu²⁺ and 2-Cu²⁺ sense cyanide in ratiometric way via colorimetric and fluorescent changes.     

Synthesis and electrochemical properties of new cobalt and manganese phthalocyanine complexes tetra-substituted with 3,4-(methylendioxy)-phenoxy

The synthesis and electrochemical properties of new cobalt and manganese phthalocyanine complexes, tetra-substituted with 3,4-(methylendioxy)-phenoxy at the peripheral (complexes 3 and 5) and non-peripheral (complexes 4 and 6) positions, are reported. Complexes 3 and 4 showed Q-band absorption, in DMF, at 668 and 686 nm, respectively while Q-band due to complexes 5 and 6 appeared at 732 and 760 nm, respectively in CHCl₃. All the complexes showed well resolved redox processes attributed to both metal and ring based processes. Complexes 3 and 4 showed four redox processes, labeled I, II, III and IV. For complex 3, process I (Co^IPc⁻²/Co^IPc⁻³) was observed at −1.45 V, II (Co^IIPc⁻²/Co^IPc⁻²) at −0.38 V, III (Co^IIIPc⁻²/Co^IIPc⁻²) at +0.49 V and IV (Co^IIIPc⁻¹/Co^IIIPc⁻²) at +0.97 V versus Ag|AgCl. Similar processes were observed for complex 4 at −1.36 V, −0.27 V, +0.56 V, +1.03 V versus Ag|AgCl, respectively. Complexes 5 and 6 showed two redox processes (I and II). For complex 5, these processes appeared at −0.79 V (Mn^IIPc⁻²/Mn^IIPc⁻³, I) and −0.07 V versus Ag|AgCl (Mn^IIIPc⁻²/Mn^IIPc⁻², II), while for complex 6, they were observed at −0.86 V and −0.04 V versus Ag|AgCl. Spectroelectrochemistry was used to probe and confirm the origin of these processes.     

Synthesis, characterization and luminescence study of dimethyl(β-ketoiminato)gallium (-indium) complexes: crystal structure of dimethyl[1-phenyl-3-N-(4-methoxyphenylimino)-1-butanonato]gallium

Six dimethylgallium (indium) complexes of type Me₂ML [M = Ga, L = 1-phenyl-3-N-(phenylimino)-1-butanonato (1), 1-phenyl-3-N-(p-methoxyphenylimino)-1-butanonato (2), 1-phenyl-3-N-(o-chloro phenylimino)-1-butanonato (3); M = In, L = 1-phenyl-3-N-(phenyl imino)-1-butanonato (4), 1-phenyl-3-N-(p-methoxyphenylimino)-1-butanonato (5), 1-phenyl-3-N-(o-chlorophenylimino)-1-butanonato (6)] have been synthesized by reaction of trimethylgallium (indium) with appropriate 1-phenyl-3-N-(arylimino)-1-butanones. The complexes obtained have been characterized by elemental analysis, ¹H NMR, IR and mass spectroscopy. Structure of 2 has been determined by X-ray single-crystal analysis, in which Ga atom is four coordinated. Complexes 1-6 emit colors from blue to green (463-491 nm) when irradiated by UV light. The electroluminescent (EL) properties of 1-6 were examined by fabricating EL devices using 1-6 as emitter, respectively. The EL bands are located in the green region (509-522 nm).     

Naphthalimide-based fluorescent Zn chemosensors showing PET effect according to their linker length in water

We have developed naphthalimide-based fluorescent chemosensors that exhibit fluorescence enhancement upon binding Zn²⁺ ion in 10 mM HEPES buffer (pH 7.4) at 25 °C. The fluorescence enhancement was induced by a PET inhibition process in which electron transfer from the nitrogen lone pair electrons of the Dpa unit to naphthalimide was blocked upon the binding of the sensor to Zn²⁺. The longer the linker length (n = 1-3) of the sensor, the less the PET efficiency becomes. Among the sensors (1, 2, and 3) examined, 1 shows the highest selectivity and sensitivity for Zn²⁺ over other transition metal ions and alkali metal ions in water.     

Bifunctional fluorescent thiacalix[4]arene based chemosensor for Cu and F ions

A new thiacalix[4]arene based fluorescent sensor bearing two dansyl groups has been synthesized in cone conformation. In CH₃CN:CH₂Cl₂ (1:1), the presence of Cu (II) induces the formation of a 1:1 metal:ligand complex, which exhibits increasing emission at 433 nm at the expense of the fluorescent emission of 1 centered at 504 nm. The detection limit of the sensor for Cu²⁺ is 2×10⁻⁷ mol L⁻¹. For anion sensing, 1 shows a high selectivity for fluoride ions over other anions tested.     

Synthesis and structural characterization of metallated bioconjugates: C-terminal labeling of amino acids with aminoferrocene

Aminoferrocene, H₂N-Fc, has been substituted to the C-terminus of six amino acids using the HBTU/HOBt coupling protocol. The synthesized bioconjugates Boc-Aaa-NH-Fc, Aaa = Gly (1), Leu (2), Phe (3), Val (4), Cys(Acm) (5), Tyr(^tBu) (6) (Acm = acetamidomethyl, ^tBu = tert-butyl), have been characterized by ¹H NMR, ¹³C NMR, EI-MS, EI-HRMS, UV and CD spectroscopies. In addition, a VT NMR study on 4 and the X-ray structure of 1 are presented.     

Syntheses, crystal structures and properties of six coordination compounds with flexible dps ligand

Six new compounds: [M(dps)(dca)₂]_∞ (1, M = Cd; 2, M = Fe), [Cu(dps)(dca)₂(CH₃OH)₂]_∞ (3), [M(dps)₂(SCN)₂(H₂O)₂]_∞ (4, M = Cd; 5, M = Fe), [Cu(dps)₄(SCN)₂]_∞ (6), (dps = 4,4′-dipyridyl sulfide, dca = dicyanamide) were synthesized, characterized by FT-IR, element analysis and TG. Their structures were determined by single crystal X-ray diffraction. According to the structure analysis, compounds 1 and 2 are three-dimensional microporous frameworks constructed by Cu-dps-Cu and Cu-dca-Cu bridges; compound 3 shows a zigzag chain constructed by a Cu-dps-Cu bridge; compounds 4 and 5 show double-stranded chains constructed by a Cu-(dps)₂-Cu bridge while thiocyanate anions act as terminal groups; compound 6 is a mononuclear compound. Moreover, compound 1 shows visible yellow luminescence under UV light irradiation and such phenomenon is mainly attributed to inter-ligand transitions.     

Synthesis and photophysical properties of novel push-pull-type solvatochromic 7-deaza-2′-deoxypurine nucleosides

We have synthesized two novel push-pull-type fluorescent 7-deazapurine nucleosides, ^CNZA and ^CNZG, and investigated their photophysical properties. In particular, ^CNZA was found to exhibit a remarkable solvatofluorochromicity (Δλ_fl.max = 60 nm). We incorporated ^CNZA into oligonucleotides and found that ^CNZA can form a stable base pair with both thymine and cytosine. Such environmentally sensitive fluorescent nucleosides have a potential as a fluorescence sensor for structural studies of nucleic acids.     

A FRET fluorescent chemosensor SPAQ for Zn based on a dyad bearing spiropyran and 8-aminoquinoline unit

A novel FRET fluorescent sensor SPAQ containing 8-aminoquinoline (donor) and spiropyran derivative (acceptor) was designed and synthesized for detecting Zn²⁺. The probe successfully exhibited a fluorescence turn on and ratiometric response for Zn²⁺ in ethanol solution with high selectivity. Upon excitation at 370 nm, the modulation of the emission intensity of SPAQ at 645 and 470 nm was achieved in the presence of Zn²⁺ by fluorescent resonance energy transfer (FRET) and chelation-enhanced fluorescence (CHEF) effects.     

Three different fluorescent responses to transition metal ions using receptors based on 1,2-bis- and 1,2,4,5-tetrakis-(8-hydroxyquinolinoxymethyl)benzene

The dipod 1,2-bis(8-hydroxyquinolinoxymethyl)benzene (3) and tetrapod 1,2,4,5-tetrakis(8-hydroxyquinolinoxymethyl)benzene (5) have been synthesized through nucleophilic substitution of respective 1,2-bis(bromomethyl)benzene (2) and 1,2,4,5-tetra(bromomethyl)benzene (4) with 8-hydroxyquinoline (1). For comparison, 1,3,5-tris(8-hydroxyquinolinoxymethyl)benzene derivatives (7a and 7b) have been obtained. The complexation behavior of these podands towards Ag⁺, Co²⁺, Ni²⁺, Cu²⁺, Zn²⁺, and Cd²⁺ metal ions has been investigated in acetonitrile by fluorescence spectroscopy. The sterically crowded 1,2,4,5-tetrapod 5 displays unique fluorescence ‘ON-OFF-ON’ switching through fluorescence quenching (λ_max 395 nm, switch OFF) with <1.0 equiv of Ag⁺ and fluorescence enhancement (λ_max 495 nm, switch ON) with >3 equiv Ag⁺ and can be used for estimation of two different concentrations of Ag⁺ at two different wavelengths. The addition of Cu²⁺, Ni²⁺, and Co²⁺ metal ions to tetrapod 5 causes fluorescence quenching, i.e., ‘ON-OFF’ phenomena at λ_max 395 nm for <10 μM (1 equiv) of these ions but addition of Zn²⁺ and Cd²⁺ to tetrapod 5 results in fluorescence enhancement with a gradual shift of λ_em from 395 to 432 and 418 nm, respectively. Similarly, dipod 3 behaves as an ‘ON-OFF-ON’ switch with Ag⁺, an ‘ON-OFF’ switch with Cu²⁺, and an ‘OFF-ON’ switch with Zn²⁺. The placement of quinolinoxymethyl groups at the 1,3,5-positions of benzene ring in tripod 7a-b leads to simultaneous fluorescence quenching at λ_max 380 nm and enhancement at λ_max 490 nm with both Ag⁺ and Cu²⁺. This behavior is in parallel with 8-methoxyquinoline 8. The rationalization of these results in terms of metal ion coordination and protonation of podands shows that 1,2 placement of quinoline units in tetrapod 5 and dipod 3 causes three different fluorescent responses, i.e., ‘ON-OFF-ON’, ‘ON-OFF’, and ‘OFF-ON’ due to metal ion coordination of different transition metal ions and 1, 3, and 5 placement of three quinolines in tripod 7, the protonation of quinolines is preferred over metal ion coordination. In general, the greater number of quinoline units coordinated per metal ion in 5 compared with the other podands points to organization of the four quinoline moieties around metal ions in the case of 5.