Anisotropic hydrogel thickness gradient films derivatized to yield three-dimensional composite materials

We report the preparation of in-plane density gradients of amino-terminated molecules and gold particles through derivatization of laterally varying thickness gradients of poly(acrylic acid) (PAA) or poly(acrylamide) (PAAm) films. PAA and PAAm gradients were formed by Zn(II)-catalyzed electropolymerization of acrylic acid (AA) or acrylamide (AAm) in the presence of an in-plane electrochemical potential gradient applied to Au or indium-tin-oxide (ITO) working electrodes. PAA thickness gradients were converted into density gradients of fluorocarbons or biocompatible groups by derivatizing with NH(2)CH(2)(CF(2))(6)CF(3) or an Arg-Gly-Asp (RGD)-containing peptide, respectively. X-ray photoelectron spectroscopy (XPS) and XPS imaging were used to characterize the modified PAA gradients. Transition regions as narrow as 104 mum were achieved for fluorocarbon gradients. PAAm gradients were treated with gold particles to form a density gradient of gold particles. Surface plasmon resonance imaging and scanning electron microscopy (SEM) as well as UV-visible absorption measurements were used to characterize the gold particle density gradients. It is likely that the gold particles were attached both on the surface and inside the PAAm film.     

Synthesis of nucleoside mono- and triphosphates bearing oligopyridine ligands, their incorporation into DNA and complexation with transition metals

Modified nucleoside mono- (dA(R)MPs and dC(R)MPs) and triphosphates (dA(R)TPs and dC(R)TPs) bearing bipyridine or terpyridine ligands attached via acetylene linker were prepared by single-step aqueous-phase Sonogashira cross-coupling of 7-iodo-7-deaza-dAMP or -dATP, and 5-iodo-dCMP or -dCTP with the corresponding bipyridine- or terpyridine-linked acetylenes. The modified dN(R)TPs were successfully incorporated into the oligonucleotides by primer extension experiment (PEX) using different DNA polymerases and the PEX products were used for post-synthetic complexation with Fe(2+).     

Synthesis and computational studies of Mg complexes supported by 2,2':6,2'-terpyridine ligands

The reactions of the substituted 2,2':6,2'-terpyridine ligands, 4'-mesityl-2,2':6',2'-terpyridine (mesitylterpy) (1a), 4,4',4'-tri-tert-butyl-2,2':6',2'-terpyridine (tri-(t)Buterpy) (1b) and 4'-phenyl-2,2':6',2'-terpyridine (phenylterpy) (1c) with Grignard reagents were investigated. When half an equivalent of mesitylterpy or tri-(t)Buterpy were treated with MeMgBr in diethyl ether, the only products were (R-terpy)MgBr(2) (R = mesityl (5a), or tri-(t)Bu (5b)) and Me(2)Mg and a similar reaction was observed in THF. Compounds 5a and 5b were characterized by X-ray crystallography. Changing the Grignard reagent to PhMgBr also generated 5a and 5b along with Ph(2)Mg, while the reaction between MeMgCl or PhMgCl and 1a or 1b generated (R-terpy)MgCl(2) (R = mesityl (6a), or tri-(t)Bu (6b)) and either Me(2)Mg or Ph(2)Mg, respectively. The products from reactions between phenylterpy (1c) and Grignard reagents were highly insoluble and could not be fully characterized but appeared to be the same as those from reactions with 1a and 1b. In contrast to other studies using tridentate nitrogen ligands, which formed either mixed halide alkyl species or dihalide and bis(alkyl) species depending on whether the Grignard reagent was reacted with the ligand in diethyl ether or THF, the formation of mixed halide, alkyl complexes of the type (R-terpy)MgR'X (R' = Me or Ph; X = Cl or Br) or dialkyl species such as (R-terpy)MgR'(2) (R' = Me or Ph) was not observed here, regardless of the reaction conditions. DFT studies were performed to complement the experimental studies. The experimental results could not be accurately reproduced unless π-stacking effects associated with free terpyridine were included in the model. When these effects were included, the calculations were consistent with the experimental results which indicated that the formation of the terpy Mg dihalide species and R'(2)Mg (R' = Me or Ph) is thermodynamically preferred over the formation of mixed alkyl halide Mg species. This is proposed to be due to the increased steric bulk of the terpy ligand in the coordination plane, compared with other tridentate nitrogen donors.     

Tetrahydroquinolizinium ylides: preparation and 1,3-dipolar cycloaddition

By the Cu(II)-catalyzed reaction of 2-(4-diazo-3-oxoalkyl)pyridines (2), 4-alkoxycarbonyl (or 4-acyl)-3-oxo-1,2,3,4-tetrahydroquinolizinium ylides (3) were obtained in high yields. From the cycloaddition reaction of 3 with acetylenic esters (propynoates or acetylenedicarboxylates) the labile [2 + 3] cycloadducts, 3-oxo-3H-2a,4,5,8a-tetrahydropyrrolo[2,1,5-de]quinolizine-2a-carboxylates (8 or 12), were identified, which further reacted with DMAD (dimethyl acetylenedicarboxylate) to afford azocine derivatives (15 or 16) and produced pyrrolodihydroquinolizines (9 or 20) by dealkoxycarbonylation.     

Graft polymers from poly(vinyl chloride) and chlorinated rubber

Graft polymers from poly(vinyl chloride) (PVC) and chlorinated rubber (CIR) with side chains of poly(methyl methacrylate) (PMMA), poly(methyl acrylate) (PMA), or poly(ethyl methacrylate) (PEMA) were synthesized. For this purpose, a vinyl monomer was polymerized in the presence of small quantities of PVC or CIR with benzoyl peroxide as catalyst. The graft polymers were separated from both homopolymers by precipitation with methanol from methyl ethyl ketone solutions of the reaction products and the grafting efficiency was calculated. The graft polymers were characterized by infrared spectra, elemental analysis, NMR, and osmometric or light-scattering determinations. From the results it is concluded that the PVC or CIR molecules contain side chains of PMMA, PMA, or PEMA. The graft polymers showed higher molecular weights, and the values of second virial coefficient for these polymers were much different from those of the starting polymers.     

Cyclopropyl alkynes as mechanistic probes to distinguish between vinyl radical and ionic intermediates

[reaction: see text] The reactions of (trans-2-phenylcyclopropyl)ethyne, 1a, (trans,trans-2-methoxy-3-phenylcyclopropyl)ethyne, 1b, and (trans,trans-2-methoxy-1-methyl-3-phenylcyclopropyl)ethyne, 1c, with either aqueous sulfuric acid or tris(trimethylsilyl)silane (or tributyltin hydride) and AIBN have been investigated. Protonation and addition of the silyl (or stannyl) radical occurred at the terminal position of the alkyne giving an alpha-cyclopropyl-substituted vinyl cation or radical, respectively. Under both reaction conditions, 1a yielded products derived from ring opening toward the phenyl substituent. Alkynes 1b and 1c, however, gave different products depending on whether radical or cationic conditions were used. When radical conditions were employed, products derived from regioselective ring opening toward the phenyl substituent were obtained. In contrast, when cationic conditions were employed, products derived from selective ring opening toward the methoxy substituent were isolated. The corresponding alpha-cyclopropyl-substituted vinyllithium derivatives were also synthesized and were found to be stable toward rearrangement. An estimate of the rate constants for ring opening of the alpha-cyclopropylvinyl cations was also made: values of 10(10)-10(12) s(-1) were found for the vinyl cations derived from protonation of the terminal carbon of alkynes 1a-c. Based on these results, cyclopropyl alkynes 1a-c can be classified as hypersensitive mechanistic probes for the detection of vinyl radical or cationic intermediates generated adjacent to the cyclopropyl ring and, in the case of 1b and 1c, the distinction between a radical or cationic intermediate is possible.     

A New Route to Thio- and Selenosulfonates from Disulfides and Diselenides. Application to the Synthesis of New Thio- and Selenoesters of Triflic Acid

Alkyl and aryl trifluoromethanethiosulfonates(1) (or selenosulfonates) were prepared in one step either from alkyl and aryl sulfenyl (or selenenyl) chlorides and sodium trifluoromethanesulfinate (3) or, more generally, from disulfides (or diselenides), 3, and bromine. The second method involved trifluoromethanesulfonyl bromide as key intermediate. Benzenethiosulfonates were obtained in a similar way from disulfides, benzenesulfinate, and bromine but benzeneselenosulfonates could not be obtained by the same method from diselenides.     

表面引发原子转移自由基聚合制备聚电解质修饰的碳纳米管

利用聚电解质对多壁碳纳米管(MWNT)的表面进行修饰,能有效改善碳纳米管在溶剂中的分散性.首先将经硝酸氧化的碳纳米管与二甲亚砜和乙二醇反应,得到羟基修饰的碳纳米管.然后利用羟基与α-溴异丁酰溴(或α-氯丙酰氯)的酯化反应,在碳纳米管的表面引入了原子转移自由基聚合(atom transfer radical polymerization,ATRP)引发基团,引发丙烯酸叔丁酯(tBA)或4-乙烯基吡啶(4VP)聚合,通过投料比的改变,得到接入量不同的聚合物修饰的碳纳米管.利用热重分析(TGA)和红外对聚合物修饰的碳纳米管进行表征.将聚合物修饰的碳纳米管进行水解(或季胺化),制备得到在水溶液中良好分散的聚电解质修饰的碳纳米管.     

由Diels-Alder反应合成新型热稳定性含硅双马来酰亚胺──合成及表征

由Ｄｉｅｌｓ－Ａｌｄｅｒ反应合成新型热稳定性含硅双马来酰亚胺──合成及表征郝建军,江璐霞,蔡兴贤（四川联合大学材料科学与工程学院高分子材料系,成都,６１００６５）关键词双马来酰亚胺,有机硅,Ｄｉｅｌｓ－Ａｌｄｅｒ反应,合成,表征采用单体扩链增韧［１］...     

Poly(p-phenylenes) with well-defined side chain polymers

1,4-Dibromo-2,5-bis(bromomethyl)benzene and benzene-2,5-dibromomethyl-1,4-bis(boronic acid propanediol diester) were used as bifunctional initiators in Atom Transfer Radical Polymerization (ATRP) of styrene or in cationic ring opening polymerization (CROP) of tetrahydrofuran in conjunction with CuBr /2,2'-bipyridine or AgSbF₆, respectively. The resulting well-defined macromonomers with low polydispersities, bearing functional groups as bromine or boronic ester were used in Suzuki or Yamamoto type couplings, leading to poly(p-phenylene)s (PPPs) with polystyrene (PSt), polytetrahydrofuran (PTHF) or alternating PSt/PTHF side chains. The new polymers were characterized by GPC, ¹H-NMR, ¹³C-NMR, IR and UV analysis. Thermal behavior of the precursors PSt or PTHF macromonomers and the final polyphenylenes were investigated by TGA and DSC analyses and compared.     

Regiospecific hydrogenation of quinolines and indoles in the heterocyclic ring

Quinolines, indoles, acridine, and carbazole were hydrogenated using a large variety of heterogeneous catalysts in hydrocarbon solvents in an effort to achieve selective hydrogenation of the heterocyclic ring. When quinolines were hydrogenated using supported platinum, palladium, rhodium, ruthenium, or nickel metal catalysts in the presence of hydrogen sulfide, carbon disulfide, or carbon monoxide, there was exclusive hydrogenation of the heterocyclic ring to give only 1,2,3,4-tetrahydroquinolines. Use of iridium, rhenium, molybdenum(VI) oxide, tungsten(VI) oxide, chromium(III) oxide, iron(III) oxide, cobalt(II) oxide-molybdenum(VI) oxide, or copper chromite catalysts also caused exclusive hydrogenation of the heterocyclic ring even without addition of sulfur Compounds or carbon monoxide. Hydrogenation of indoles using platinum, rhenium, or, in some cases, nickel catalysts (with or without sulfur Compounds) occurred exclusively in the heterocyclic ring to give indolines, but conversions were affected by indole-indoline equilibria.     

Effect of matrix and solvent on the analysis of novel poly(phenylenevinylene) derivatives by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry

Six novel poly(phenylenevinylene) (PPV) derivatives carrying butoxy or myrtanyl groups, including poly(2-butoxy-m-phenylenevinylene) (Bu-MPV), poly(2,5-dibutoxy-p-phenylenevinylene-alter-p-phenylenevinylene) (Bu-PPPV), poly(2,5-dibutoxy-p-phenylenevinylene-alter-m-phenylenevinylene) (Bu-PMPV), poly(2-myrtanyl-m-phenylenevinylene) (Myr-MPV), poly(2,5-dimyrtanyl-p-phenylenevinylene-alter-p-phenylenevinylene) (Myr-PPPV), and poly(2,5-dimyrtanyl-p-phenylenevinylene-alter-m-phenylenevinylene) (Myr-PMPV), were characterized by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOFMS). The repeat unit mass and the end-group structures of each sample were obtained. Distinctly different spectra with different ion series and/or different ion signal intensities were observed for the analytes Bu-MPV, Myr-MPV, Bu-PPPV, Myr-PPPV and Myr-PMPV when different matrices were used, and different ion series were acquired when different solvents were used for Myr-PPPV and Myr-PMPV. The results show that the PPV oligomers with different shapes and/or with different end groups can be selectively desorbed and ionized in MALDI by using different matrices.     

Energetic quaternary salts containing bi(1,2,4-triazoles)

New energetic salts (2, 3, 9, 10, and 11) were synthesized via the protonation of 4,4'-bi(1,2,4-triazole) or N-4-(1,2,4-triazole)-N-3-(4-methyl-1,2,4-triazole)amine with nitric acid or perchloric acid or 5-nitro-tetrazole. The structures of 4,4'-bi(1,2,4-triazolium) nitrate (2), N,N-dimethyl-N'-(5-methyl-tetrazole)methanimidamide (8), and N-4-(1,2,4-triazole)-N-3-(4-methyl-1,2,4-triazolium)amine perchlorate (10) were confirmed by a single-crystal X-ray analysis. The physical properties and heats of combustion of the new ionic salts were measured, and the heats of formation were also determined.     

四（烷硫基苯基）卟啉及其金属配合物的合成

某些人工合成的金属卟啉,由于其活化分子氧的功能,被广泛用作生物模拟氧化反应中的催化剂。金属四苯基卟啉及其衍生物是用得最普遍的模型化合物。文献中巳报道过各种四苯基卟啉衍生物的合成方法,但尚未见带烷硫基的四苯基卟啉衍生物的系统合成方法。本文报道这类四苯基卟啉衍生物及其金属配合物的合成。 本文采用通常的一步法合成四苯基卟啉衍生物,即首先参照文献方法合成烷硫基苯甲     

Syntheses of reactive fluorescent stains derived from 5(2)-aryl-2(5)-(4-pyridyl)oxazoles and bifunctionally reactive linkers

Several bifunctionally reactive linkers containing halide or sulfonate ester groups were prepared. The linkers were used to quaternize 5-(4-methoxyphenyl)-2-(4-pyridyl)oxazole and 2-(6-chromanyl)-5-(4-pyridyl)oxazole to produce fluorescent stains that contained a reactive group such as an isothiocyanate, an N-hydroxysuccinimidyl ester, a maleimide, or an oxirane. The stains were derivatized with either 1-propylamine, 1-propanethiol, or piperidine, as appropriate, to help in characterization. The stains may serve as more photostable alternatives to fluoresceins or coumarins.     

Liquid-liquid equilibria for ternary acetonitrile-ethanol-saturated hydrocarbon and acetonitrile-1-propanol-saturated hydrocarbon mixtures

Isothermal vapour-liquid equilibrium data for acetonitrile-1-propanol at 45° C were measured by use of a recirculating still. The liquid-liquid equilibria of (acetonitrile-etha-nol)-(n-hexane or n-heptane or n-octane) and those of (acetonitrile-1-propanol)-(cyclohexane or n-hexane or n-heptane) were obtained from measurements of tie-lines. The experimental results were compared with those calculated from the UNIQUAC associated-solution model.     

Dissymmetric gold(I) N-heterocyclic carbene complexes: a key unexpected structural parameter for highly efficient catalysts in the addition of alcohols to internal alkynes

Gold(I) N-heterocyclic carbene complexes (Au-NHC) with symmetric (bis-benzyl, -propyl and -mesityl substituents) and dissymmetric (mesityl and alkyl--benzyl or propyl--substituents) NHC ligands were synthesized and tested as catalysts for the addition of methanol to 3-hexyne, as a representative internal alkyne. While symmetric ones--bis-alkyl (propyl or benzyl) or bis-mesityl systems--displayed low activity, dissymmetric Au-NHC systems with one alkyl (benzyl or propyl) and one mesityl groups on the NHC unit were unexpectedly highly active with rates and turnover numbers up to 294,000 h(-1) and 800,000 mol.mol(Au)(-1).     

含NS和NNSS供电子原子的钌(Ⅱ)羰基配合物

通过[RuHCl(CO)(PPh₃)₂(B)] (B=PPh₃, 吡啶 (py), 哌啶 (pip), 吗啉 (morph))与适当的席夫碱按1∶1的物质的量的比反应，合成了二齿和四齿席夫碱钌(Ⅱ)配合物。所用席夫碱配体通过S-苄基二硫代肼基甲酸酯与2,3-丁二酮(物质的量的比分别为1∶1和1∶2)的缩合反应制得。通过元素分析和多种物理化学方法对钌(Ⅱ)配合物和其席夫碱配体进行了表征。钌(Ⅱ)配合物为六配位的反磁性物质。用三种细菌对席夫碱配体及其钌(Ⅱ)配合物的抗微生物活性进行了筛选试验。     

Nitric oxide binding and photodelivery based on ruthenium(II) complexes of 4-arylazo-3,5-dimethylpyrazole

Two fluorescent ligands, 3,5-dimethyl-4-(6'-sulfonylammonium-1'-azonaphthyl)pyrazole (dmpzn, 1) and 3,5-dimethyl-4-(4'-N,N'-dimethylaminoazophenyl)pyrazole (dmpza, 2) were obtained by condensation of ketoenolic derivatives with hydrazine. 1 and 2 formed the novel dinuclear complexes [(H(2)O)(3)ClRu(micro-L)(2)RuCl(H(2)O)(3)] (3 or 4) and [(H(2)O)(NO)Cl(2)Ru(micro-L)(2)RuCl(2)(NO)(H(2)O)] (6 or 7) (where L 1 = 2 or , respectively) which were characterized by IR, NMR and elemental analysis. The nitrosyl complexes were prepared by bubbling purified nitric oxide through methanol solutions of the corresponding ruthenium(II) chloroderivative or by reaction of the appropriate ligands with Ru(NO)Cl(3). Complexes 3 and 4 were found to bind NO, resulting in an increase in fluorescence. Ligand 1 also formed the mononuclear nitrosyl complex [Ru(NO)(bpy)(2)(dmpzn)]Cl(2) (8) which released NO in water at physiological pH and in the solid state as revealed by fluorescence and IR measurements, respectively.     

Synthesis and characterisation of bis-cyclen based dinuclear lanthanide complexes

The design and synthesis of several bis-macrocyclic cyclen (1,4,7,10-tetraazacyclododecane) ligands and their corresponding lanthanum or europium complexes is described; these dinuclear lanthanide systems were made by connecting two macrocyclic cyclen moieties through a rigid, covalent, p-xylylenediamide bridge or a flexible aliphatic hexane bridge. These ligands were subsequently functionalised with six acetamide pendant arms (CONR1R2: R1 = R2 = H or CH3, or R1 = H, R2 = CH3). The corresponding lanthanide bis-complexes were then formed by reaction with La(III) and Eu(III) triflates, yielding overall cationic (+VI charged) complexes.