Palladium catalyzed Suzuki coupling reactions using cobalt-containing bulky phosphine ligands

Three bulky mono-dentate alkyne-bridged dicobalt-phosphine complexes [(μ-PPh₂CH₂PPh₂)Co₂(CO)₄](μ,η-PhCCPPh₂) 4a, [(μ-PPh₂CH₂PPh₂)Co₂(CO)₄](μ,η-Me₃CCCPPh₂) 5a and [(μ-PPh₂CH₂PPh₂)Co₂(CO)₄](μ,η-Me₃SiCCPPh₂) 6a were prepared from the reactions of the bis(diphenylphosphino)methylene (dppm) bridged dicobalt complex Co₂(CO)₆(μ-Ph₂PCH₂PPh₂) with PhCCPPh₂1, Me₃CCCPPh₂2, and Me₃SiCCPPh₂3, respectively. These three metal-containing compounds 4a, 5a and 6a were employed as ligands, replacing conventional organic phosphines, in the Suzuki cross-coupling reactions and have been proved to be effective, authentic mono-dentate phosphine ligands.     

Convenient and efficient Suzuki-Miyaura cross-coupling reactions catalyzed by palladium complexes containing N,N,O-tridentate ligands

N,N,O-Tridentate ligands 1-9 were prepared from the condensation of amines with nine aromatic aldehydes or ketones. These ligands are thermally stable and neither air- nor moisture-sensitive. Combination of either 2-methoxy-6-[(pyridine-2-ylmethylimino)-methyl]-phenol, 1 or 2-(benzothiazol-2-yl-hydrazonomethyl)-4,6-di-tert-butyl-phenol, 6 with Pd(OAc)₂ furnished an excellent catalyst precursor for the Suzuki-Miyaura cross-coupling of various aryl bromides with arylboronic acids. The effects of varying solvents, bases, and ligand/palladium ratios on the performance of the coupling reaction were investigated. The molecular structures of both free ligand 1 and its palladium acetate complex 10 were determined by single-crystal X-ray diffraction methods. The DFT studies revealed that the catalytic performance of palladium complexes involving this type of a ligand may differ greatly upon a small variation in its structure.     

Synthesis of cobalt-containing monodentate phosphine ligand and application toward Suzuki cross-coupling reactions

A bulky, dicobalt complexed, mono-dentate phosphine, [(μ-PPh₂CH₂PPh₂)Co₂(CO)₄](μ,η-PhCCPCy₂) (4), was prepared from the reactions of the bis(diphenylphosphino)methylene (dppm)-bridged dicobalt complex Co₂(CO)₆(μ-Ph₂PCH₂PPh₂) (2) with PhCCPCy₂ (3). Combination of 4 and Pd(OAc)₂ (1:1) gave an active catalyst for the palladium-catalyzed Suzuki coupling of aryl bromides with phenylboronic acid; the catalytic reactions can be performed even under low catalyst loadings (0.1-0.001 mol% 4/Pd(OAc)₂). Compound 4 has been proved to be an authentic and effective mono-dentate phosphine ligand. Crucial factors such as 4/Pd(OAc)₂ ratio, base being used, solvent volume, temperature, and electronic variation of the aryl bromides in reactions were also investigated and results are reported.     

Five-membered cyclopalladated complex containing bidentate phosphine ligands; Synthesis,characterization, and highly efficient Suzuki cross-coupling reactions

A nonsymmetric phosphorus ylide and its palladium(II) complex have been synthesized as potential catalytically active compounds. The reaction of 1 equiv nonsymmetric phosphorus ylide, Ph₂PCH₂PPh₂C(H)C(O)PhBr with [Pd(dppe)Cl₂], followed by treatment with 2 equiv AgOTf led to [(dppe)Pd(Ph₂PCH₂PPh₂C(H)C(O)PhBr)](OSO₂CF₃)₂, which contains a five-membered P,P chelate ring on one side and a five-membered P,C chelate ring on the other side. The palladium complex was synthesized and investigated by fourier transform infrared spectroscopy (FT-IR), UV–visible, multinuclear (¹H, ³¹P and ¹⁹F) nuclear magnetic resonance (NMR), and electrospray ionisation-mass spectroscopic techniques. FT-IR and ³¹P NMR studies revealed that the phosphorus ylide is coordinated to palladium via the terminal phosphorus (P_c) of the ylide and methene group (CH). Suzuki reactions for varying aryl halides using the cyclopalladated complex as an efficient catalyst were performed. Various aryl halides were coupled with arylboronic acids in DMF, under air, in the presence of 0.001?mol% of the homogeneous catalyst to afford the corresponding cross-coupled products in good to excellent yields.     

Palladium-catalyzed Suzuki cross-coupling reactions in a microemulsion

An enhancement of palladium-catalyzed Suzuki cross-coupling reactions between substrates possessing long-chain alkyl or oxyalkyl substituents in two-phase media, in the presence of sodium dodecylsulfate, is shown. Quantitative evaluations of the influence of SDS on the reaction rates were determined.     

Preparation of monodentate phosphinite ligands: their applications in palladium catalyzed Suzuki reactions

Two phosphinites 2,6-OMe, 4-Me, 1-OPR₂C₆H₂ (5a: R=Ph; 5b: R=^tBu) were prepared in good yields. Two methoxy groups are placed on the 2,6 positions of the phosphinites deliberately thereby to avoid a plausible orthometallation process while coordinating toward palladium metal. Further reaction of 5a with PdCl₂ in the ratio of 2:1 and 1:1 gave 5a ligated palladium complexes {(5a)PdCl(μ-Cl)}₂7a and {(5a)₂PdCl₂} 8a, respectively. As revealed from their crystal structures, the former is a dimeric complex with anticipated molecular arrangement; nevertheless, the latter is a monomeric complex with unexpected, energetically unfavorable cis form. By contrast, only dimeric form was observed from the reaction of 5b with PdCl₂. It is believed that the bulky substituents, ^tBu, on 5b prevent the formation of a monomeric complex in cis form. Fair to good efficiencies were observed for the Suzuki-Miyaura cross-coupling reactions employed in situ-prepared 5/Pd(OAc)₂ as the catalytic precursor.     

Preparation and characterization of cobalt-containing P,N-ligands and an unusual palladium complex ion pair: their applications in amination reactions

Several cobalt-containing P,N-ligands, alkyne-bridged dicobalt phosphines [(μ-PPh₂CH₂PPh₂)Co₂(CO)₄(μ,η-Me₂NCH₂CCPR₂)] (4a: R=^tBu; 4b: R=Ph; 4c: R=Cy), were prepared from the reactions of corresponding alkynylphosphines Me₂NCH₂CCPR₂ (2a: R=^tBu; 2b: R=Ph; 2c: R=Cy) with a dppm-bridged dicobalt complex [Co₂(CO)₆(μ-P,P-PPh₂CH₂PPh₂)] 3. A unique palladium complex ion pair [(μ-PPh₂CH₂PPh₂)Co₂(CO)₄(μ,η-Me₂NCH₂CCP (^tBu)₂)Pd(η³-C₃H₅)]⁺[(η³-C₃H₅)PdCl₂]⁻7a was obtained from the reaction of 4a with [(η³-C₃H₅)PdCl]₂. Compounds 4a, 4b, and 4c are authentic cobalt-containing P,N-bidentate ligands and can be used for ligation of palladium from various sources such as Pd(OAc)₂ or [(η³-C₃H₅)PdCl]₂. Satisfactory efficiencies were observed for the amination reactions of aryl bromides with morpholine employing either a 4a-chelated palladium complex formed in situ or pre-formed 7a as the catalytic precursor.     

1,3-Dicarbonyl compounds as phosphine-free ligands for Pd-catalyzed Heck and Suzuki reactions

Some 1,3-dicarbonyl compounds (such as pentane-2,4-dione and 3-oxo-N-phenylbutanamide) were found to constitute highly efficient, yet low-priced and phosphine-free ligands for the Pd-catalyzed Heck and Suzuki reactions of aryl bromides and iodides with very high turnover numbers (ca. 103-104).     

Palladium bis(2,2,6,6-tetramethyl-3,5-heptanedionate) catalyzed Suzuki, Heck, Sonogashira, and cyanation reactions

Palladium bis(2,2,6,6-tetramethyl-3,5-heptanedionate): a structurally well-defined O-containing transition metal complex is reported as an efficient catalyst for Suzuki, Heck, and Sonogashira cross-coupling reactions. The protocol was also applied successfully for cyanation of aryl halides under milder operating conditions. The system tolerated the coupling of various aryl halides with alkenes, alkynes, and organoboronic acid along with the cyanation of aryl halides providing good to excellent yields of desired products.     

Solid-phase synthesis of biarylalanines via Suzuki cross-coupling and intramolecular N-acyliminium Pictet-Spengler reactions

Solid-supported masked peptide aldehydes containing 3- or 4-iodophenylalanine residues were subjected to Pd-catalyzed Suzuki cross-coupling reactions with arylboronic acids. The biarylalanines generated were applied in intramolecular N-acyliminium Pictet-Spengler reactions. In this way, a range of pharmacologically interesting aryl-substituted pyrroloisoquinolines was obtained in excellent purity (>95%).     

Synthesis and characterizations of N,N,N′,N′-tetrakis (diphenylphosphino)ethylendiamine derivatives: Use of palladium(II) complex as pre-catalyst in Suzuki coupling and Heck reactions

Oxidation of N,N,N′,N′-tetrakis(diphenylphosphino)ethylendiamine (1) with elemental sulfur and selenium gives the corresponding sulfide and selenide, respectively, [(Ph₂P(E))₂NCH₂CH₂N(P(E)Ph₂)₂] (E: S 1a, Se 1b). Complexes of 1 [(M₂Cl₄){(Ph₂P)₂NCH₂CH₂N(PPh₂)₂}] (M: Ni(II) 1c, Pd(II) 1d, Pt(II) 1e) were prepared by the reaction of 1 with NiCl₂ or [MCl₂(COD)] (M = Pd, Pt). The new compounds were characterized by NMR, IR spectroscopy and elemental analysis. The catalytic activity of Pd(II) complex 1d was tested in the Suzuki coupling reaction and Heck reaction. The palladium complex 1d catalyses the Heck reaction between styrene and aryl bromides as well as Suzuki coupling reaction between phenylboronic acid and arylbromides affording stilbenes and biphenyls in high yield, respectively.     

Preparation of polymer-supported palladium/N-heterocyclic carbene complex for Suzuki cross-coupling reactions

A novel polymer-supported N-heterocyclic carbene (NHC) was prepared from chloromethyl polystyrene (CM PS) resin using a simple procedure, and was used as the ligand for palladium (Pd) catalysts. The polymer-supported Pd-NHC complexes efficiently catalyzed the Suzuki cross-coupling of aryl halides and phenylboronic acid in good yields and excellent purities under aqueous conditions.     

Palladium(II) complexes bearing methylene and ethylene bridged pyrido-annelated N-heterocyclic carbene ligands as active catalysts for Heck and Suzuki-Miyaura cross-coupling reactions

The synthesis and characterization of new bidentate N-heterocyclic carbene ligands is described. The ligands are derived from methylene (me) and ethylene (et) bridged imidazo[1,5-a]pyridine-3-ylidenes (impy) and can be synthesized readily from imidazo[1,5-a]pyridine and the respective dihaloalkanes. Palladium(II) dihalide complexes bearing these et(impy)₂ or me(impy)₂ ligands were prepared and also structurally characterized. The angle of the impy plane vs. the C-Pd-C plane is depending on the bridging unit as well as the halide ligands. In the solid state the me(impy)₂PdBr₂ complex forms a dimer by weak intermolecular Pd-hydrogen bridges. The activity of the Pd-complexes as catalysts for the Heck and Suzuki-Miyaura reactions was tested under various conditions. The catalysts show good activity at 120 °C in Heck and at 85 °C in Suzuki-Miyaura reactions.     

Preparation of a palladium dimer with a cobalt-containing bulky phosphine ligand: Its application in palladium catalyzed Suzuki reactions

A palladium dimer with a cobalt-containing phosphine ligand, {(μ-PPh₂CH₂PPh₂)Co₂(CO)₄(μ,η-(tBu)₂PCCC₆H₄-κC¹)Pd(μ-Cl)}₂ (3), was prepared from the reaction of its monomer precursor, (μ-PPh₂CH₂PPh₂)Co₂(CO)₄(μ,η-(tBu)₂PCCC₆H₄-κC¹)Pd(μ-OAc) (2), with LiCl. The crystal structure of 3, determined by X-ray diffraction methods, revealed a doubly chloride-bridged palladium dimeric conformation. Suzuki coupling reactions of bromobenzene with phenylboronic acid were carried out catalytically using these two novel palladium complexes 2 and 3 as catalyst precursors. Factors such as the molar ratio of substrate/catalyst, reaction temperature, base and solvent that might affect the catalytic efficiencies were investigated. As a general rule, the performance is much better by employing 3 than 2 as the catalyst precursor.     

Suzuki reactions catalyzed by palladium complexes bearing the bulky (2,6-dimesitylphenyl)dimethylphosphine

A new bulky and stable phosphine (2,6-dimesitylphenyl)dimethylphosphine, and representative palladium complexes have been prepared and structurally characterized; some of these complexes prove efficient for coupling of aryl chlorides with arylboronic acids.     

Palladium catalyzed Suzuki-Miyaura coupling with aryl chlorides using a bulky phenanthryl N-heterocyclic carbene ligand

A novel bis-phenanthryl N-heterocyclic carbene (NHC) based palladium acetate catalyst was effective for the coupling of various aryl and vinyl chlorides with organoboron compounds. N,N-Bis-(2,9-dicyclohexyl-10-phenanthryl)-4,5-dihydroimidazolium chloride 8 (H₂ICP·HCl) with Pd(OAc)₂ and KF·18-c-6 in THF at room temperature gave Suzuki-Miyaura coupling of aryl and vinyl chorides, including unactivated and di-ortho substituted substrates in high yields. Hindered tri- and tetra-ortho substituted products were also efficiently produced. Benzyl chloride was also found to be a useful coupling partner and trimethylboroxine was used to give methylated products. The effect of ligand, base, temperature, solvent, and reaction time are reported along with various substrates including halides and triflates.     

Pyrazole-tethered arylphosphine ligands for Suzuki reactions of aryl chlorides: how important is chelation?

Pyrazole-derived bidentate ligands (P,N-donor) with bulky substituents at the 3-position of the pyrazole, 1b–d, were used with Pd₂(dba)₃ to carry out efficient Suzuki coupling reactions with both aryl bromides and chlorides. Enhanced catalytic activity on account of steric crowding in the metal complex suggested participation of a chelated structure in the intermediate catalytic steps.     

Phosphine-free Suzuki cross-coupling reactions under ultrasound

Suzuki cross-coupling reaction was successfully carried out in ethylene glycol under phosphine-free conditions to obtention of biaryls using ultrasonic irradiation. High yields were obtained using different palladium and bases sources. The catalyst was recycled up to three times with good to moderate activity.     

Palladium supported on hydrotalcite as a catalyst for the Suzuki cross-coupling reaction

The efficiency of various palladium salts as catalysts in the Suzuki cross-coupling reaction, and the influence of the base and temperature used on its conversion, were studied. The use of PdCl₂ supported on hydrotalcite as catalyst in the presence of potassium carbonate as base was found to provide the best results. Reaction temperatures above 90 °C ensured conversion levels on a par with those for many homogeneous catalysts.