Self-assembly of a new series of quadruply hydrogen bonded heterotrimers driven by the donor-acceptor interaction

This paper describes the self-assembly of a new series of heterotrimers in chloroform-d by utilizing the cooperative interaction of hydrogen bonding and donor-acceptor interaction. Compounds 1 and 11, in which an 2-ureido-4[1H]-pyrimidinone unit is connected to 34-crown-10 or 36-crown-10, were used as donor monomer, and 2 and 19, in which an 2-ureido-4[1H]-pyrimidinone unit is connected to NDI, were used as acceptor monomer, while linear compound 4, which contains two diamido-1,8-naphthyridines, was used as template. A large tri-p-(t-butyl)phenylmethoxyl group was introduced to 19 in order to compare its assembling behavior with that of 2. Mixing 4 with dimer 1·2 caused 1·2 to fully decompose and to afford 55% of ‘in-in’-oriented heterotrimer 1·4·2. Adding 4 to the solution of 2·11 or 11·19 in chloroform-d also led to full dissociation of the dimers. However, in these systems the ‘in-in’-arranged heterotrimer 2·4·11 or 11·4·19 could be produced exclusively.     

A supramolecular bottlebrush polymer assembled on the basis of cucurbit[8]uril-encapsulation-enhanced donor-acceptor interaction

A supramolecular bottlebrush polymer has been constructed in water through the self-assembly of a rigid electron-deficient building block and an electron-rich monomer which bears two tetraethylene glycol chains, driven by CB[8]-encapsulation-enhanced donor-acceptor interaction. The as-formed supramolecular bottlebrush polymer has been characterized by ¹H NMR titration experiment, UV-vis spectroscopy, DLS and 2D ¹H NMR DOSY.     

Self-assembly of supramolecular polymers in water from tetracationic and tetraanionic monomers in water through cooperative electrostatic attraction and aromatic stacking

The cooperative electrostatic attraction and π-π stacking between tetrahedral tetrapyridinium and three tetraanionic tetraphenylethylenes led to the formation of a new series of supramolecular polymers in water.     

Pleated polymeric foldamers driven by donor–acceptor interaction and conjugated radical cation dimerization

Two naphthalene(NP) and bipyridinium(BIPY~(2+)) alternately incorporated polymers P1 and P2 have been prepared through the formation of dynamic hydrazone bonds. The polymers formed NP–BIPY~(2+)donor–acceptor interaction-induced pleated secondary structure. Upon reducing the BIPY~(2+)units to radical cation BIPY+, intramolecular dimerization of the BIPY+units induced the backbones to afford another pleated secondary structure. Adding electron-rich macrocyclic polyether bis-1,5-dinaphtho[38]crown-10 or electron-deficient cyclobis(paraquat-p-phenylene) cyclophane did not break the first foldamer by complexing the BIPY2+or NP units of the polymers, whereas the di(radical cationic)ring of the second cyclophane could break the second foldamer by forming threading complexes with the BIPY+units of the polymers.     

Selective rearrangements of quadruply hydrogen-bonded dimer driven by donor-acceptor interaction

A general method has been developed to control the selective rearrangement of Meijer's AADD quadruply hydrogen-bonded homodimers by introducing an additional donor-acceptor interaction. Therefore, one donor-assembling monomer, 1, in which the electron-rich bis(p-phenylene)-34-crown-10 moiety is connected to the hydrogen-bonding moiety, and two acceptor-assembling monomers, 2 and 3, in which the electron-deficient pyromellitic diimide or naphthalene diimide group is incorporated, respectively, are synthesized and characterized. 1H NMR and 2D-NOESY studies show that all these compounds exist as stable homodimers in chloroform. Mixing 1 equiv of 1 with 1 equiv of 2 in chloroform leads to the formation of heterodimers 1.2 in approximately 60 % yield, as a result of the electrostatic interaction between the bis(p-phenylene)-34-crown-10 moiety of 1 and the pyromellitic diimide group of 2. Selective formation of heterodimer 1.3 (>97 %) was achieved by mixing 1 equiv of 1 with 1 equiv of 3 in chloroform which resulted in a strengthened electrostatic interaction between the bis(p-phenylene)-[34]crown-10 moiety of 1 and the naphthalene diimide group of 3. The structures of heterodimers 1.2 and 1.3, which have been characterized by 1H NMR and UV/Vis experiments, reveal a remarkable promoting effect between the donor-acceptor interaction and intermolecular hydrogen-bonding. 1H NMR studies also reveal that heterodimers 1.2 and 1.3 can be fully and partially dissociated by addition of heterocycle 29, leading to the formation of new more robust heterodimers 1.29 and 2.29, or 3.29,respectively, and partially regenerated by subsequent addition of heterocyclic compound 30 through the formation of a new heterodimer 29.30. Heterodimers 1.2 and 1.3 represent a novel class of pseudo[2]rotaxanes constructed by two different noncovalent interactions.     

聚合物表面自组装电极的制备

采用在聚合物表面制备选择性化学镀电极的方法, 将具有电极结构的模板置于聚萘二甲酸乙二醇酯(PEN)基片表面上, 用紫外光进行照射, 使辐照区域表面形成羧基, 然后通过配位作用使银离子附着到表面上, 再经过紫外光照射还原出金属银颗粒, 最后以表面的金属银颗粒为催化剂进行特定区域化学镀铜形成电极. 利用四探针法测得电极的电阻率为5.063×10-2 Ω·mm2/m, 与纯金属铜的电阻率的数量级相同.     

Synthesis, molecular structure and intramolecular aromatic-ring stacking interaction of a novel binuclear Cu(Ⅱ) complex with 1, 10-phenanthroline and phenylacetate

The complex [Cu(phen)2(POAc)3]ClO·4H2O has been synthesized and investigated by elemental analysis, IR spec-troscopy and X-ray diffraction methods, where phen = 1,10-phenanthroline, POAc = phenylacetate group). The complex crystallizes in the triclinic space group PI with two molecules in a unit cell of dimensions a = 1.0579(2) nm, b = 1.2423(3) nm, c = 1.9190(4) nm, α = 71.84(1)°, β = 80.50(2)°, γ = 88.60(1)°, V = 2.3625(9) nm3, R = 0.0407 and Rw = 0.0656. The complex results from bridging of two Cu(phen)2 units by three carboxylate groups, and each Cu2 ion is in a distorted square pyramidal geometry with two nitrogen atoms of phen and three carboxylate oxygen atoms of POAc. It has been showed that intramolecular stacking interactions occur between the phenyl moieties of POAc and aromatic rings of phen, leading to a novel molecule structure with two coordinating modes of carboxylate ligands, of which two phenylacetates are μ2-carboxylate-O-bridging ligands, and the other is a μ2-carboxylate-     

Self-assembly of vesicles from the stacking of a dipodal F?H-N hydrogen bonded arylamide foldamer

In this paper, we report the synthesis and self-assembling behavior of an F?H-N hydrogen bonding-induced arylamide-based dipodal foldamer. SEM, AFM, TEM, and XRD studies reveal that this preorganized oligomer stacks to form vesicles in methanol-chloroform (10-70%) binary solvents due to the strong stacking interaction of the folded segments and the supramolecular polymeric feature of the dipodal molecule in the stacked state. In contrast, a simple folded molecule can give rise to vesicles only when the chloroform content is 45-55%.     

Fabrication of a novel immunosensor using functionalized self-assembled monolayer for trace level detection of TNT by surface plasmon resonance

We have developed a new immunosensor based on self-assembly chemistry for highly sensitive and label-free detection of 2,4,6-trinitrotoluene (TNT) using surface plasmon resonance (SPR). A monolayer of amine terminated poly(ethylene glycol) hydrazinehydrochloride (PEG-NH₂) thiolate was constructed on an activated gold surface and immobilized with trinitrophenyl-β-alanine (TNPh-β-alanine) by amide coupling method. The binding interaction of a monoclonal anti-TNT Ab (M-TNT Ab) with TNPh-β-alanine immobilized thiolate monolayer surface was monitored and evaluated for detection of TNT based on the principle of indirect competitive immunoreaction. Here, the competition between the self-assembled TNT derivative and the TNT in solution for binding with antibody yields in the response signal that is inversely proportional to the concentration of TNT in the linear detection range. With the present immunoassay format, TNT could be detected in the concentration range from 0.008 ng/ml (8 ppt) to 30 ng/ml (30 ppb). The response time for an immunoreaction was 2 min and one immunocycle could be done with in 4 min including surface regeneration. Bound antibodies could be easily eluted from the self-assembled immunosurface at high recoveries (more than 100 cycles) using pepsin solution without any damage to the TNT derivatives immobilized on the surface. The compact self-assembled monolayer was highly stable and prevented the non-specific adsorption of proteins on the surface favoring error free measurement.     

Enhanced gelation property due to intra-molecular hydrogen bonding in a new series of bis(amino acid)-functionalized pyridine-2,6-dicarboxamide organogelators

A series of pyridine-2,6-dicarboxamide derivatives containing two α-amino acid pendant groups was prepared and characterized. Three of the synthesized compounds obtained from this series, all having aromatic amino acid side chains, were found to be excellent organogelators toward aromatic solvents (mgc∼10-20 mg/mL), alcoholic solvents (mgc∼4-15 mg/mL), and CCl₄ (mgc∼4-10 mg/mL). It was found that the intra-molecular hydrogen bonds between the pyridine dicarboxamide N-Hs and the pyridine N atom were the key structural elements for gel formation. This series of compounds represented one of the rare examples where both inter- and intra-molecular hydrogen bonds were needed for effective gel formation. FTIR, ¹H NMR, and CD spectroscopy revealed that both hydrogen bonding and π-π aromatic stacking were the driving forces for gelation.     

偶氮苯修饰DNA的组装行为及主客体作用介导的形貌调控

智能型DNA纳米材料,由于其具有灵敏的外界刺激响应性,是纳米技术和生物医学应用中一类重要的功能纳米材料。本文研究的具有光响应性质的偶氮苯共价修饰DNA的两亲分子在水相中可组装成直径为28.8nm的球形胶束,光刺激或者β-环糊精与偶氮苯的主客体识别的调控均可实现组装解离,进一步通过荧光包裹实验和金纳米颗粒负载实验验证了球形胶束的组装机制,为其在药物负载、靶向识别等生物医学领域提供了潜在应用。     

Synthesis of donor-acceptor substituted oligothiophenes by Stille coupling

A synthesis of donor-acceptor-substituted oligothiophenes by Stille coupling is described. The 5′-estanyl derivatives, readily prepared from 5-alkoxy- and 5-amino-2,2′-bithiophenes 7 were coupled with the appropriate aryl or heteroaryl bromides to give the title compounds.     

SYNTHESIS AND STRUCTURE OF A POLYMERIC 1,3-BENZENEDICARBOXYLATO COMPLEX OF Mn(II) WITH PHENANTHROLINE

Abstract

A novel Mn(II) complex bridged by 1,3-benzenedicarboxylate (BDC) has been synthesized by the diffusion method. The complex crystallizes in space group P2₁/c with a = 8.345(2), b = 10.427(1), c = 18.756(2) Å, β = 100.19(1)°. Each BDC bridges three Mn(II) atoms through two carboxyl groups with different coordination modes to form a complex polymeric chain. The coordination geometry around the Mn(II) atom is seriously distorted from the normal octahedron. Large deviations of the donor atoms out of the coordination planes and unexpected bond angles around Mn(II) and donor O atoms suggest the existence of an electrostatic interaction between Mn(II) and donor atoms in the complex. Close stacking of aromatic rings is observed in the complex, the distance between the neighboring phen planes being 3.2085 Å.     

Synthesis, characterization, and electroluminescent properties of star shaped donor-acceptor dendrimers with carbazole dendrons as peripheral branches and heterotriangulene as central core

Luminescent and redox-active heterotriangulene-based dendrimers (G1 and G2) of first and second generation have been synthesized, and their photophysical properties, oxidation behaviors, and applications in organic light emitting diodes (OLEDs) have been investigated. The dendrimers show efficient aggregation-induced emissions originated from the carbazole dendrons, heterotriangulene core, intramolecular charge-transfer (ICT), and intermolecular aggregation absorptions. Highest-occupied molecular orbital and lowest-unoccupied molecular orbital (HOMO and LUMO) values were acquired using UV-vis spectroscopy and cyclic voltammetry. The OLEDs fabricated with G1 and G2 as non-doping emitters exhibit exclusive aggregation-induced luminescence peaking at 600 and 630 nm, respectively, and demonstrate a good performance with maximum luminance of 1586 cd m⁻² at current efficiency of 5.3 cd A⁻¹ for G1 and 827 cd m⁻² at current efficiency of 6.9 cd A⁻¹ for G2.     

A novel double polymer modified hydrophobic/hydrophilic stationary phase for liquid chromatography

In this paper,norbornene imidazolium hexafluorophosphate(NM-MIm-PF6)was modified on the surface of aminopropyl silica by ring-opening metathesis polymerization(ROMP),and then oligo(ethylene glycol)methacrylate(OEGMA)were grafted on the surface by atom transfer radical polymerization(ATRP).Some characterizations in this article confirmed that the synthesis of P(NM-MIm-PF6)-SiPOEGMA(Pl-Si-P2)is successful.The P1-Si-P2 can separate sugars,amino acids,sulfonamides in a hydrophilic interaction mode and alkyl benzene,polycyclic aromatic hydrocarbon in a reverse phase mode.The experiment also found that the column has typical characte ristics of hydrophobic/hydrophilic separation mechanism.Compared to single hydrophobic C18 column and single hydrophilic Si-NH2 column,this P1-Si-P2 shows certain advantages.     

Self-assembly of poly(ferrocenyldimethylsilane)-poly(benzyl ether) linear-dendritic organometallic polymer

A kind of linear-dendritic organometallic polymer poly(ferrocenyldimethylsilane)-poly(benzyl ether) (PFS-PBE) was synthesized and the self-assembly behaviors of the polymer was studied, which has illuminated the formation of multiple morphologies and, in particular, adjusting the concentration of polymers and adding poly(benzyl ether) into self-assembled solution can form different size and morphology. Furthermore, it was found that the aging time of samples could affect self-assembled morphology. The micelle formation mechanisms were also demonstrated.     

Development of a sensitive surface plasmon resonance immunosensor for detection of 2,4-dinitrotoluene with a novel oligo (ethylene glycol)-based sensor surface

A surface plasmon resonance (SPR) immunosensor for detection of 2,4-dinitrotoluene (2,4-DNT), which is a signature compound of 2,4,6-trinitrotoluene-related explosives, was developed by using a novel oligo (ethylene glycol) (OEG)-based sensor surface. A rabbit polyclonal antibody against 2,4-DNT (anti-DNPh-KLH-400 antibody) was prepared, and the avidity for 2,4-DNT and recognition capability were investigated by indirect competitive ELISA. The sensor surface was fabricated by immobilizing a 2,4-DNT analog onto an OEG-based self-assembled monolayer formed on a gold surface via an OEG linker. The fabricated surface was characterized by Fourier-transform infrared-refractive absorption spectrometry (FTIR-RAS). The immunosensing of 2,4-DNT is based on the indirect competitive principle, in which the immunoreaction between the anti-DNPh-KLH-400 antibody and 2,4-DNT on the sensor surface was inhibited in the presence of free 2,4-DNT in solution. The limit of detection for the immunosensor, calculated as three times the standard deviation of a blank value, was 20 pg mL⁻¹, and the linear dynamic range was found to be between 1 and 100 ng mL⁻¹. Additionally, the fabricated OEG-based surface effectively prevented non-specific adsorption of proteins, and the specific response to anti-DNPh-KLH-400 antibody was maintained for more than 30 measurement cycles.     

Temperature responsive 3D structure of rod-like bionanoparticles induced by depletion interaction

Herein, we show that rod-like tobacco mosaic virus （TMV） can self-assemble into 3D bundled structures in aqueous solution using azobenzene modified Pluronics F127 block copolymers （Azo-F127） to induce depletion. The structures are characterized by both transmission electron microscopy and dynamic light scattering. The self-assembly process can be controlled reversibly by temperature. The formation of Azo-F127 hard spheres during the self-assembly is the main cause of this phenomenon.     

Swelling behaviour of thermo-sensitive hydrogels based on oligo(ethylene glycol) methacrylates

The thermo-sensitive swelling behaviour of hydrogels based on 2-(2-methoxyethoxy)ethyl methacrylate (MEO₂MA) and synthesized by free radical polymerization has been investigated. The homopolymer hydrogel presents a low critical solution temperature (LCST) close to room temperature, which can be modulated by copolymerization with longer oligo(ethylene glycol) side chain methacrylates (OEG_xMA). Then, three series of copolymeric hydrogels synthesized with MEO₂MA and several low ratios of OEG_xMA with M_n = 475 g mol⁻¹ (OEG₈MA), M_n = 1100 g mol⁻¹ (OEG₂₃MA) and M_n = 2080 g mol⁻¹ (OEG₄₅MA) were studied. In addition to conventional tetra(ethylene glycol) dimethacrylate (TEGDMA) crosslinker, the use of biodegradable oligo(caprolactone) dimethacrylate (OCLDMA) was also tested. The hydrophilic/hydrophobic balance, function of the short and the long OEG side chains, establishes a swelling behaviour depending on monomer composition, side chain length and temperature. The swelling at equilibrium increases with increasing the amount of OEG_xMA in the copolymer and, at the same time, the collapsing moves progressively to higher temperature. The temperature dependent volumetric response of some of these hydrogels can be compare with the most extended thermo-sensitive hydrogel, which is based on poly(N-isopropylacrylamide) (P(N-iPAAm)). Therefore, they are potential candidates to replace it in applications where biocompatibility is required.     

Development and validation of a hydrophilic interaction liquid chromatographic method for determination of aromatic amines in environmental water

A simple, precise, and accurate hydrophilic interaction liquid chromatographic (HILIC) method has been developed for the determination of five aromatic amines in environmental water samples. Chromatography was carried out on a bare silica column, using a mixture of acetonitrile and a buffer of NaH₂PO₄–H₃PO₄ (pH 1.5, containing 10 mM NaH₂PO₄) (85:15, v/v) as a mobile phase at a flow rate of 1 mL min⁻¹. Aromatic amines were detected by UV absorbance at 254 nm. The linear range of amines was good (r² > 0.998) and limit of detection (LOD) within 0.02–0.2 mg L⁻¹ (S/N = 3). The retention mechanism for the analytes under the optimum conditions was determined to be a combination of adsorption, partition and ionic interactions. The proposed method was applied to the environmental water samples. Aromatic amines were isolated from aqueous samples using solid-phase extraction (SPE) with Oasis HLB cartridges. Recoveries of greater than 75% with precision (RSD) less than 12% were obtained at amine concentrations of 5–50 μg L⁻¹ from 100 mL river water and influents from a wastewater treatment plant (WWTP). The present HILIC technique proved to be a viable method for the analysis of aromatic amines in the environmental water samples.