Enantioselective synthesis of d- and l-α-methylcysteine with hydantoinase

A scalable and cost-effective synthesis of d- and l-α-methylcysteine is described. A key step is d-selective cyclization of N-carbamoyl S-tert-butyl-d,l-α-methylcysteine catalyzed by hydantoinase. d-5-tert-Butylthiomethyl-5-methylhydantoin and N-carbamoyl S-tert-butyl-l-α-methylcysteine were obtained with excellent yield and optical purity, and these compounds were easily separated by filtration. After hydrolysis and cleavage of the tert-butyl group, d- and l-α-methylcysteine hydrochloride were obtained.     

Novel synthesis of 5-thio-hexopyranoside: preparation of 5-thio-d- and l-glucose and 1,6-anhydro-5-thio-l- and d-altrose

Asymmetric synthesis of both d- and l-isomers of 5-thioglucose and 1,6-anhydro-5-thioaltrose are described. The key intermediates, l- and d-threose diethylacetal derivatives, were derived by chemical transformation from d-xylose or d-arabinose and by Sharpless asymmetric dihydroxylation from γ-hydroxycrotylaldehyde diethylacetal. They transformed to γ-thiiranyl diethylacetal via trans-2,3-epoxy alcohol in seven steps. Acetic acid-promoted cyclization of γ-thiiranyl diethylacetal gave 5-thiopyranoside. Removal of the protected groups under the acidic conditions afforded 5-thio-d- and l-glucose and 1,6-anhydro-5-thio-l- and d-altrose, respectively.     

Chelation controlled regiospecific O-substitution of myo-inositol orthoesters: convenient access to orthogonally protected myo-inositol derivatives

A general method for the completely regioselective protection of the three secondary hydroxyl groups of orthoester derivatives of myo-inositol, utilizing the subtle differences in reactivity exhibited by its alkali metal alkoxides due to differences in their ability to form chelates, is described. This method provides convenient access to orthogonally protected myo-inositol derivatives. A comparison of the methylation of racemic 4-O-trityl-myo-inositol 1,3,5-orthoformate in the presence of sodium or lithium ions showed that stabilization of the C4-alkoxide by chelation with lithium overrides steric hindrance offered by the C6-axial substituent in deciding the regioselectivity during the nucleophilic O-substitution.     

Regioselective O-acylation of myo-inositol 1,3,5-orthoesters: dependence of regioselectivity on the stoichiometry of the base

A metal mediated unusual 1-3 acyl migration from C4-O to C2-OH of myo-inositol 1,3,5-orthoformate was observed during the alkylation of racemic 4-O-benzoyl-myo-inositol 1,3,5-orthoformate. This has been exploited for the selective esterification of either the C4(6)-OH or the C2-OH of myo-inositol by varying the amount of the base used. While the use of 1 equiv of the base (sodium hydride or potassium tert-butoxide) for the acylation of myo-inositol orthoesters gives the corresponding C4-ester exclusively, the use of two or more equivalents of base for the same reaction gives the C2-ester exclusively. The relatively higher stability of the alkoxide of racemic 2-O-acyl-myo-inositol 1,3,5-orthoester as compared to the alkoxide of 4-O-acyl-myo-inositol 1,3,5-orthoester is suggested to be responsible for the observed isomerization.     

Regioselective phosphorylation of vicinal 3,4-hydroxy myo-inositol derivative promoted practical synthesis of d-PtdIns(4,5)P2 and d-Ins(1,4,5)P3

The reactivity of 3 and 4-OH in 3,4-diol myo-inositol derivatives were observed through the phosphorylation, acylation and silylation. The results indicated that 3-OH is much more reactive than 4-OH, giving regiospecifically 3-mono-functionalized products. This investigation provided a concise methodology for the synthesis of natural d-form of PtdIns(4,5)P2 and d-Ins(1,4,5)P3 from l-1,2-O-cyclohexylidene-3,4-O-(tetraisopropyl disiloxane-1,3-diyl)-myo-inositol.     

Total syntheses of cyclitol based natural products from myo-inositol: brahol and pinpollitol

Inositol and their derivatives are important class of biologically active natural products. Among the nine theoretically possible inositols, six are known to occur in nature. Interestingly one or more methyl ethers of these inositols have been isolated from plants and these methyl inositols are presumed to have important functions in plant biology. Brahol and pinpollitol are two naturally occurring methylated inositols reported to have allo-inositol and chiro-inositol configurations, respectively. Adopting our sulfonate inversion strategies for synthesizing protected chiro- and allo-inositols from cheaply available myo-inositol in combination with new methods we have achieved the total syntheses of these methylated inositols. The proposed structure of brahol has been synthesized in six steps from myo-inositol. We have not only disproved the proposed structure of brahol but also established its correct structure. Also, we have efficiently synthesized pinpollitol and its positional isomer from myo-inositol. These works involve several selective protection-deprotection strategies of inositol hydroxyl groups.     

Synthesis of l-α-phosphatidyl-d-myo-inositol 3,5-bisphosphate from d-glucose

Efficient synthesis of l-α-phosphatidyl-d-myo-inositol 3,5-bisphosphate was achieved from 1,2,5,6-diisopropylidene-d-glucose by utilizing ring-closing metathesis and catalytic OsO₄ dihydroxylation.     

Synthesis of homochiral 2-C-perfluoroalkyl substituted d- and l-riboses

Homochiral 2-C-perfluoroalkyl substituted d- and l-riboses were synthesized via Barbier, Grignard and Ruppert type reactions. The influence of the size of the perfluoroalkyl groups, attached to C-2, on the furanose/pyranose as well as on the α-furanose/β-furanose and α-pyranose/β-pyranose ratio in solution was studied.     

d-2-Deoxy-2-fluoro-chiro-inositol—a new member of the deoxy fluoro inositol family

An efficient synthetic route to d-2-deoxy-2-fluoro-chiro-inositol has been developed with inversions of the C-1 and C-5 configuration of l-quebrachitol. The key steps of the route are two consecutive one pot epimerization procedures which do not require time-consuming protecting groups chemistry.     

Practical synthesis of d-[1-C]mannose, l-[1-C] and l-[6-C]fucose

The chemical synthesis of ¹³C-labeled mannose and fucose is important for the preparation of molecular probes used in the conformational study of the oligosaccharide portions of glycoproteins. A new method for the synthesis of the title [1-¹³C]-labeled compounds via the corresponding olefin compounds, which are in turn derived from d-mannitol or l-arabinose by efficient introduction of ¹³C, by the Wittig reaction using Ph₃P¹³CH₃I and n-BuLi, is described. The introduction of ¹³CH₃I to produce the [1-¹³C]- and [6-¹³C]-labeled compounds was accomplished in 62%, 56%, and 71% yields, respectively. All mannose and fucose protons, from H-1 to H-6, were observed by the HMQC-TOCSY technique using 1:1 mixtures of [1-¹³C]- and [6-¹³C]-labeled compounds.     

Enatioselective quantitative separation of d- and l-thyroxine by molecularly imprinted micro-solid phase extraction silver fiber coupled with complementary molecularly imprinted polymer-sensor

Thyroxine is a known disease biomarker which demands a highly sensitive and selective technique to measure ultratrace level with enantiodifferentiation of its optical isomers (d- and l-), in real samples. In this work, an approach of hyphenation between molecularly imprinted micro-solid phase extraction and a complementary molecularly imprinted polymer-sensor was adopted for enantioseparation, preconcentration, and analysis of d- and l-thyroxine. In both techniques, the same imprinted polymer, coated on a vinyl functionalized self-assembled monolayer modified silver wire, was used as the respective extraction fiber as well as sensor material. This combination enabled enhanced preconcentration of test analyte substantially so as to achieve the stringent limit [limit of detection: 0.0084 ng mL⁻¹, RSD = 0.81%, S/N = 3 (d-thyroxine); 0.0087 ng mL⁻¹, RSD = 0.63%, S/N = 3 (l-thyroxine)] of clinical detection of thyroid-related diseases, without any problems of non-specific false-positive contribution and cross-reactivity.     

Synthesis of d-gluco-, l-ido-, d-galacto-, and l-altro-configured glycaro-1,5-lactams from tartaric acid

The d-gluco-, l-ido-, d-galacto-, and l-altro-configured glycaro-1,5-lactams 1-4 were prepared from the known tartaric anhydride 5 via the aldehyde 6. These lactams are known (1) or potential (2-4) inhibitors of β-d-glucuronidases and α-l-iduronidases. Olefination of 6 to the (E)- and (Z)-alkenes 7 or 8, followed by reagent or substrate controlled dihydroxylation, lactonization, azidation, reduction, and deprotection led in 10 steps and in overall yields of 11-20% to the title lactams.     

Prevailing mechanisms of the hydrolytic degradation of oligo(d,l-lactide)-grafted dextrans

The predominant mechanism of the hydrolytic degradation of oligo(d,l-lactide)-grafted dextrans in phosphate buffer was followed by quantifying both released dextran and lactic acid from the copolymers. The studied amphiphilic copolymers, with well-defined structure, exhibited various oligo(d,l-lactide) weight fractions (F^OLA) while having a quite high extent of free hydroxyl groups (>90%). Depending on their F^OLA, oligo(d,l-lactide)-grafted dextrans were soluble either in water or in organic solvents (THF, toluene, …) and different prevailing mechanisms of hydrolytic degradation were observed. The copolymer soluble in THF, with longer oligo(d,l-lactide) grafts and higher F^OLA, was found to degrade via a particular mechanism by which the greatest part of dextran was released into buffer medium during the first two weeks of degradation. During the initial stage of degradation, the hydrophilicity of dextran backbone was considered to be the main driving force for the hydrolytic cleavage of the ester linkage between backbone and grafts. Released oligo(d,l-lactide) grafts were found to be degraded via chain-end degradation or random degradation depending on their solubility in buffer medium. In case of water-soluble copolymers with shorter oligo(d,l-lactide) grafts and lower F^OLA, the chain-end degradation was exclusively observed.     

Kinetics of thermo-oxidative and thermal degradation of poly(d,l-lactide) (PDLLA) at processing temperature

Poly(d,l-lactide) (PDLLA) degraded at processing temperature under air and nitrogen. A random chain scission model was established and used to determine the activation energy E_a, and FT-IR, ¹H and ¹³C NMR were used to elucidate the degradation behavior under different atmospheres. Results showed that there were two to three stages. The 1st stage was dominated by the oligomers containing carboxylic acid groups and hydroxyl groups, during which oxygen and nitrogen had little effect on the degradation, thus they share similar E_a. When the oligomers were consumed over or evaporated, the 2nd stage began, and oxygen had a promoting effect on the thermo-oxidation process, resulting in the great decrease in E_a. The third stage of PDLLA was observed when it degraded under nitrogen over 200 °C, which was caused by the appearance of carboxylic acid substance.     

Intermolecular/interionic interactions in l-isoleucine-, l-proline-, and l-glutamine-aqueous electrolyte systems

Speed of sound and density values for ternary systems (amino acid + salt + water): l-isoleucine/l-proline/l-glutamine in aqueous solutions of 1.5 M KCl, 1 M KNO₃, and 0.5 M K₂SO₄ have been measured for several concentrations of amino acids at different temperatures (303.15, 308.15, 313.15, 318.15, and 323.15 K). Using speed of sound and density data, the thermodynamic parameters such as isentropic compressibility (κ_s), change in isentropic compressibility (Δκ_s) and relative change (Δκ_s/κ₀) in isentropic compressibility have been computed. The isentropic compressibility values decrease with increase in the amino acid concentration as well as with temperature. The decrease in κ_s values with increase in concentration of l-isoleucine/l-proline/l-glutamine in 1.5 M KCl, 1 M KNO₃, and 0.5 M K₂SO₄ has been ascribed to an increase in the number of incompressible zwitterions in solutions, and the formation of ‘zwitterions-ions’ and ‘zwitterions-water dipole’ entities in solutions. The decrease in κ_s values with increase in temperature has been attributed to the corresponding decrease of κ_relax (a relaxational part of compressibility), which is dominant over the corresponding increase of κ_∞ (an instantaneous part of compressibility). The trends of variation of Δκ_s and Δκ_s/κ₀ with variations in solute concentration and temperature have also been discussed in terms of solute-solute and solute-solvent intermolecular/interionic interactions operative in the systems.     

Synthesis of d-glucose and l-phenylalanine substituted phenylene-thiophene oligomers

Phenylene-thiophene oligomers bearing peracetylated β-d-glucose or N-BOC-l-phenylalanine as chiral substituents were synthesized in good yields by a versatile protocol based on the Suzuki-Miyaura cross-coupling reaction. Aryl iodides bearing the chiral biomolecules as substituents efficiently reacted with pinacol boronates of bi- or terthiophenes leading to the bio-functionalized oligomers in good yields.     

Poly l-lactide-layered double hydroxide nanocomposites via in situ polymerization of l-lactide

The use of clay nanofillers offers a potential route to improved barrier properties in polylactide films. Magnesium-aluminium layered double hydroxides (LDHs) are interesting in this respect and we therefore explored synthesis of PLA-LDH nanocomposites by ring-opening polymerization. This method is attractive because it should ensure good dispersion of LDH in the polymer. The effect of adding either LDH carbonate (LDH-CO₃) or laurate-modified LDH (LDH-C₁₂) was investigated. X-ray diffraction, scanning electron microscopy, and transmission electron microscopy revealed that exfoliated nanocomposites were obtained when using LDH-C₁₂ but that LDH-CO₃ gave a partly phase-separated morphology. Thermogravimetric analysis showed that PLA-LDH combinations exhibited higher degradation onset temperatures and differential scanning calorimetry confirmed that LDHs can act as nucleating agents. However, PLA molecular weight was significantly reduced when in-situ polymerization was conducted in the presence of the LDHs and we suggest that chain termination via LDH surface hydroxyl groups and/or metal-catalyzed degradation could be responsible.     

An efficient synthesis of 1,4-dideoxy-1,4-imino-d- and l-arabinitol and 1,4-dideoxy-1,4-imino-d- and l-xylitol from chiral aziridines

A highly efficient method for the synthesis of 1,4-dideoxy-1,4-imino-d- and l-arabinitol (d-AB1, 1 and l-AB1, 3) and 1,4-dideoxy-1,4-imino-d- and l-xylitol (d-DIX, 2 and l-DIX, 4) starting from commercially available chiral aziridines was developed. The general strategy employs a sequence involving two-carbon homologation, dihydroxylation, and regioselective aziridine ring opening/intramolecular five-membered iminosugar ring formation. The facile use of recrystallization to generate pure diastereomers makes the routes more amenable to large-scale synthesis.     

An efficient synthesis of d-ribo- and l-lyxo-phytosphingosine from d-tartaric acid

The preparations of d-ribo- and l-lyxo-phytosphingosines (1, 2) are described. Chelation-controlled addition of tetradecylmagnesium bromide to pentylidene-protected d-threitol aldehyde 6 afforded the key intermediate tetrol 7, providing the desired l-lyxo stereochemistry of phytosphingosine. Inversion at C4 of intermediate 7 provided the d-ribo stereochemistry.     

Intermolecular/interionic interactions in l-leucine-, l-asparagine-, and glycylglycine-aqueous electrolyte systems

Ultrasonic velocity and density values have been measured for ternary systems (amino acid/di-peptide + salt + water): l-leucine/l-asparagine/glycylglycine each in 1.5 M aqueous solutions of NaCl or NaNO₃ or KNO₃ used as solvents for several concentrations of amino acids/di-peptide at different temperatures in the range of 298.15-323.15 K. The ultrasonic velocity values have been found to increase with increase in amino acids/di-peptide concentration and temperature in all the systems. The increase in ultrasonic velocity with increase in concentration has been discussed in terms of electrostatic interactions occurring between terminal groups of zwitterions (NH₄⁺ and COO⁻) and Na⁺, K⁺, Cl⁻, NO₃⁻ ions. The interactions of water dipoles with cations/anions and with zwitterions have also been taken into consideration. It has been observed that the ion-zwitterion and ion-dipole attractive forces are stronger than those of ion-hydrophobic repulsive forces. These interactions comprehensively introduce the cohesion into solutions under investigation. The cohesive forces are further enhanced on successive increases in solute concentration. Using ultrasonic velocity and density data, the parameters such as isentropic compressibility (κ_s), change (Δκ_s) and relative change (Δκ_s/κ₀) in isentropic compressibility, specific acoustic impedance (Z) and relative association (RA) have been computed. The isentropic compressibility values decrease with increase in the concentration of solutes as well as with temperature. The decrease in κ_s values with increase in concentration of l-leucine, l-asparagine and glycylglycine in 1.5 M aqueous solutions of NaCl, NaNO₃ and KNO₃ have been explained in terms of an increase in the number of incompressible molecules/zwitterions in solutions and the formation of compact zwitterions-water dipole and zwitterions-ions structures in solutions. The decrease in κ_s values with increase in temperature has been attributed to the corresponding decrease of κ_relax. (relaxational part of compressibility)_, which is dominant over the corresponding increase of κ_∞ (instantaneous part of compressibility). The trends of variations of Δκ_s, Δκ_s/κ₀, Z and RA with change of concentration and temperature have also been interpreted in terms of various intermolecular/interionic interactions existing in the systems.