Synthesis, structural characterization, and anion binding ability of sterically congested adamantane-calix[4]pyrroles and adamantane-calixphyrins

Novel adamantane derivatives of calix[4]pyrroles 4-8 and calixphyrin 9 have been synthesized. The structure of 8 has been characterized by X-ray powder diffraction and the structure of 9 by single crystal X-ray analysis. Whereas calixphyrin 9 does not bind anions, analogous calyx[4]pyrrole 8 forms a complex with Cl⁻ in the DMSO solution and in the solid state. The solid state complexation has been accomplished on grinding in a mill, which is the first example of complex formation with an anion in the solid state.     

Pyrrolamidocalix[4]arenes: new receptors for anion recognition

Pyrrolamidocalix[4]arenes 1-4, members of a new class of anion receptors bearing pyrrolic units at the upper rim of calix[4]arene macrocycle, have been readily synthesized in good yields. Derivatives 1 and 3, with unsubstituted pyrrole units, show a good selectivity for over F⁻ and AcO⁻, while the presence of electron-withdrawing NO₂ substituents in 2 and 4 inverts the selectivity favoring more basic AcO⁻ and F⁻. In addition, it is demonstrated that the flexibility of calix[4]arene skeleton, present in 1 but absent in 3, is very important in the fitting process that leads the amidopyrrole moieties to wrap the tetrahedral guest.     

Anion recognition through hydrogen bonding by adamantane-dipyrromethane receptors

Adamantane-dipyrromethane (AdD) receptors [di(pyrrole-2-yl)methyladamantane (1), 2,2-di(pyrrole-2-yl)adamantane (2), 1,3-bis[di(pyrrole-2-yl)methyl]adamantane (3), 2,2,6,6-tetra(pyrrole-2-yl)adamantane (4)] form complexes with F⁻, Cl⁻, Br⁻, AcO⁻, NO₃⁻, HSO₄⁻, and H₂PO₄⁻. The association constants of the complexes were determined by ¹H NMR titrations, whereas the geometries of complexes 1·F⁻ (2:1), 2·F⁻ (2:1), 2·Cl⁻ (2:1), 2·AcO⁻ (2:1), and 4·F⁻ (1:1) were determined by X-ray structural analysis. The most stable complexes are of 2:1 stoichiometry with F⁻ and AcO⁻. The stability constants are in accordance with the anion basicity and the ability of AdD receptors to place the hydrogen bonding donor groups in a tetrahedral fashion around anions. The binding energies of the complexes between receptors 1-4 and F⁻ anion are calculated using quantum chemical methods. The calculated results show that the solvent polarity is important for the complexation of fluoride ion with AdD receptors 1-4.     

Fluoride sensing with a PCT-based calix[4]arene

Novel calix[4]arene-based anion sensor 1 with two coumarin units attached via amido functions acting also as binding sites is presented. Complexation of F⁻ by PCT-based 1 causes selectively red-shift in UV-vis absorption and in fluorescence emission due to H-bonding followed by deprotonation of NH-amide groups.     

A novel colorimetric and fluorometric anion sensor based on BODIPY-calix[4]pyrrole conjugate

A novel fluorescent anion sensor 1 based on boradiazaindacenes (BODIPY) derivative was synthesized and its absorption and fluorescence properties were investigated in various solvents. 1 exhibited a red shift of absorption spectrum and fluorescence quenching in varying degree in the presence of F^?, AcO^?, H₂PO₄ ^? and Cl^? due to multiple hydrogen bonding interactions between these anions and calix[4]pyrrole receptor. As an anion sensor in the visible region, 1 displayed the similar selectivity and sensitivity toward anions compared to the parent calix[4]pyrrole. However, 1 can be used as an effective dual responsive optical sensor for F^? via chromogenical and fluorogenical signals.     

Dual colorimetric sensoring bis(indolyl)calix[4]crown-6

Calix-chromophore, bis(indolyl)calix[4]crown-6 (1) in an oxidized form showing selective colorimetric changes for both alkaline earth cations and F⁻ in CH₃CN, has been newly synthesized. It is observed that the binding ability of 1 for the Ca²⁺ binding enhances in the presence of F⁻. Compound 1 can operate three independent combinational NOR logic gates toward metal cations and anions.     

An anionic chromogenic sensor based on the competition between the anion and a merocyanine solvatochromic dye for calix[4]pyrrole as a receptor site

The interaction of Brooker’s merocyanine (BM), a merocyanine dye, with calix[4]pyrrole (CP) was studied in acetonitrile. BM is violet in solution, but its interaction with CP changes the color of the solution due to the formation of CP-BM species associated through hydrogen bonding. A displacement assay was then carried out in the presence of different anions (F⁻, Cl⁻, Br⁻, I⁻, , , and ). It was verified that F⁻, and to a lesser extent Cl⁻ and , displace BM through the formation of a complex with CP, coloring the solution. Addition of makes the solution almost colorless because it is sufficiently acidic to transfer a proton to BM, removing it from the receptor site in CP and protonating the dye, thereby allowing the visual detection of the anion in relation to the other anions.     

Novel highly selective anion chemosensors based on 2,5-bis(2-hydroxyphenyl)-1,3,4-oxadiazole

2-(2-Hydroxyphenyl)-5-phenyl-1,3,4-oxadiazole 1 and 2,5-bis(2-hydroxyphenyl)-1,3,4-oxadiazole 2 were used as anion fluorescent and colorimetric chemosensors with high selectivity for H₂PO₄⁻ and F⁻ over Cl⁻, while 2 can even distinguish H₂PO₄⁻ from F⁻.     

Potentiometric evaluation of calix[4]arene anion receptors in membrane electrodes: phosphate detection

Ion-selective membrane electrodes doped with the urea- or thiourea-functionalised calix[4]arenes, 5,11,17,23-tetra-tert-butyl-25,27-bis[[4-N′-(phenylureido)butyl]oxy]-26,28-dipropoxy calix[4]arene (I) and 5,11,17,23-tetra-tert-butyl-25,27-bis[[4-(N′-phenylthioureido)-butyl]oxy]-26,28-dipropoxy calix[4]arene (II), were evaluated for anion sensing. Potentiometric results show that these calixarene ionophore-based membrane electrodes exhibit a good sensitivity to aqueous solutions of the monohydrogen orthophosphate species HPO₄²⁻ in the concentration range 5.0 × 10⁻⁵ to 1.0 × 10⁻¹ M, with near-Nernstian response slopes of −33.0 and −28.0 mV dec⁻¹ for ionophores I and II, respectively. Selectivity coefficient values for monohydrogen orthophosphate over a range of common anions were determined by the fixed interference and matched potential methods and indicated that these membrane electrodes exhibit a good selectivity for HPO₄²⁻ with respect to the other anions, including sulfate and nitrate.     

Solid chemistry of the Zn/1,2,4-triazolate/anion system: Separation of 2D isoreticular layers tuned by the terminal counteranions X (X=Cl, Br, I, SCN)

An array of 2D isoreticular layers, viz. [Zn(atrz)X]_∞ (1·X; X=Cl⁻, Br⁻, I⁻; atrz=3-amino-1,2,4-triazole anion), [Zn₄(atrz)₄(SCN)₄·H₂O]_∞ (1·SCN·H₂O) and [Zn(trz)X]_∞ (2·X; X=Cl⁻, Br⁻, I⁻; trz=1,2,4-triazole anion), have been hydrothermally synthesized and structurally characterized. Compounds 1·X and 1·SCN·H₂O are constructed from binuclear planar Zn₂(atrz)₂ subunits and exhibit (4,4) topological network when the subunits are simplified as four-connected nodes. Based on changing the terminal counteranions X (X=Cl⁻, Br⁻, I⁻, SCN⁻), the average interlayer separations of 1·X and 1·SCN·H₂O are enlarged, which equal to 5.851, 6.153, 6.651 and 8.292 Å, respectively. As a result, H₂O molecules reside in the spaces between two adjacent layers of 1·SCN·H₂O. 2 and 1 are the isomorphous structures. In common with 1, the interlayer separations of 2·X are widened with increasing the ion radius. Solid-state luminescence properties and thermogravimetric analyses of 1 and 2 were investigated, respectively.     

Binding studies of tetrathiafulvalene-calix[4]pyrroles with electron-deficient guests

The neutral meso-octamethylporphyrinogen derivative, tetraTTF-calix[4]pyrrole 1 (TTF=tetrathiafulvalene), acts as a multi-faceted receptor in that it interacts with an assortment of different guests in different ways. The conformation of receptor 1 can be reversibly switched between the 1,3-alternate conformation (i.e., 1, Fig. 1) and the cone conformation (i.e., 1·Cl⁻, Fig. 2) by the repetitive addition of chloride and sodium ions. In this paper, the results of detailed and systematic complexation studies involving both 1 and its chloride-bound complex, 1·Cl⁻, with a variety of guests are described. Receptor 1 binds quasi-planar nitroaromatic guests in its 1,3-alternate conformation, while release of these guests takes place upon addition of chloride anions. On the other hand, spherical fullerene guests are strongly bound by 1·Cl⁻. Finally, it was found that a bidentate guest, consisting of a quasi-planar 2,5,7-trinitro-9-dicyanomethylenefluorene moiety tethered to a spherical C₆₀ fullerene, could be recognized by receptor 1 in either its 1,3-alternate or its chloride-bound cone conformation, albeit through very different binding modes.     

Colorimetric response of spiropyran derivative for anions in aqueous or organic media

We previously found that a simple spiropyran derivative (1:1′,3′,3′-trimethyl-6-nitro-spiro-[2H-1-benzopyran-2,2′-indoline]) behaves as a selective and sensitive cyanide anion (CN⁻) receptor in aqueous media under UV irradiation¹³. The receptor, when irradiated by UV light in a water/MeCN mixture, creates a CN⁻-selective absorption band via a nucleophilic addition of CN⁻ to 1 (formation of the 1-CN⁻ species) and allows quantitative determination of very low levels of CN⁻. In the present work, effects of pH and water content on the response of 1 to anions were studied to clarify the detailed properties of 1. In aqueous media, 1 reacts selectively with CN⁻regardless of pH and water content, but the reaction is suppressed by a decrease in pH and an increase in water content due to the protonation of CN⁻. In contrast, in pure MeCN, addition of F⁻ also creates a new absorption band, as does CN⁻. This is promoted via a nucleophilic interaction between 1 and F⁻ in a 1:2 stoichiometry (formation of the 1-2F⁻ species). The 1-CN⁻ and 1-2F⁻ species have different photochemical properties; the 1-CN⁻ species is stable upon UV irradiation, while the UV irradiation of the 1-2F⁻ species leads to a decomposition of the spiropyran platform.     

Synthesis, characterization and electrochemical properties of two new calix[4]arene derivatives bearing two ferrocene imine or ferrocene amine units at the upper rim

A novel calix[4]arene derivative with two ferrocenyl Schiff-base groups at the upper rim 3 has been synthesized from 5,17-diformyl-25,27-dipropoxy-26,28-dihydroxy calix[4]arene and 4-ferrocenylaniline via condensation reaction. Reduction of 3 with sodium borohydride led to calix[4]arene derivative 4 with two amino ferrocenyl groups at the upper rim. The ferrocenyl Schiff-base calix[4]arene and its corresponding reduced amine have been purified and characterized by elemental analysis,¹H NMR, FTIR, Mass and UV-vis spectral data. Electrochemical properties of compounds 3 and 4 have been investigated. Cyclic voltammograms of 3 and 4 show reversible redox couples of ferrocene/ferrocinium at E_1/2=0.401 V and 0.346 V, respectively. Electrochemical studies show these redox active compounds electrochemically recognize trivalent lanthanides La³⁺ and Ce³⁺ and divalent Pb²⁺ and Cu²⁺cations. With ferrocenyl Schiff-base calix[4]arene 3 an anodic shift as large as 130 mV is observed on addition of one equivalent of Ce³⁺ ion. Also extraction properties of compound 4 towards some metal cations have been described. It has been observed that compound 4 has a good selectivity for metal cations Fe³⁺, Cu²⁺, Pb²⁺ and Cd²⁺ against Ni²⁺ and Co²⁺.     

Phosphite ligands derived from distally and proximally substituted dipropyloxy calix[4]arenes and their palladium complexes: Solution dynamics, solid-state structures and catalysis

Two bisphosphite ligands, 25,27-bis-(2,2′-biphenyldioxyphosphinoxy)-26,28-dipropyloxy-p-tert-butyl calix[4]arene (3) and 25,26-bis-(2,2′-biphenyldioxyphosphinoxy)-27,28-dipropyloxy-p-tert-butyl calix[4]arene (4) and two monophosphite ligands, 25-hydroxy-27-(2,2′-biphenyldioxyphosphinoxy)-26,28-dipropyloxy-p-tert-butyl calix[4]arene (5) and 25-hydroxy-26-(2,2′-biphenyldioxyphosphinoxy)-27,28-dipropyloxy- p-tert-butyl calix[4]arene (6) have been synthesized. Treatment of (allyl) palladium precursors [(η³-1,3-R,R′-C₃H₄)Pd(Cl)]₂ with ligand 3 in the presence of NH₄PF₆ gives a series of cationic allyl palladium complexes (3a-3d). Neutral allyl complexes (3e-3g) are obtained by the treatment of the allyl palladium precursors with ligand 3 in the absence of NH₄PF₆. The cationic allyl complexes [(η³-C₃H₅)Pd(4)]PF₆ (4a) and [(η³-Ph₂C₃H₃)Pd(4)]PF₆ (4b) have been synthesized from the proximally (1,2-) substituted bisphosphite ligand 4. Treatment of ligand 4 with [Pd(COD)Cl₂] gives the palladium dichloride complex, [PdCl₂(4)] (4c). The solid-state structures of [{(η³-1-CH₃-C₃H₄)Pd(Cl)}₂(3)] (3f) and [PdCl₂(4)] (4c) have been determined by X-ray crystallography; the calixarene framework in 3f adopts the pinched cone conformation whereas in 4c, the conformation is in between that of cone and pinched cone. Solution dynamics of 3f has been studied in detail with the help of two-dimensional NMR spectroscopy.The solid-state structures of the monophosphite ligands 5 and 6 have also been determined; the calix[4]arene framework in both molecules adopts the cone conformation. Reaction of the monophosphite ligands (5, 6) with (allyl) palladium precursors, in the absence of NH₄PF₆, yield a series of neutral allyl palladium complexes (5a-5c; 6a-6d). Allyl palladium complexes of proximally substituted ligand 6 showed two diastereomers in solution owing to the inherently chiral calix[4]arene framework. Ligands 3, 6 and the allyl palladium complex 3f have been tested for catalytic activity in allylic alkylation reactions.     

New receptors for anions in water: Synthesis, characterization, X-ray structures of new derivatives of 5,11,17,23-tetraamino-25,26,27,28-tetrapropyloxycalix[4]arene

Syntheses and characterization of ten new compounds from the calixarene family, cone - 5,11,17,23- tetrakis(2-pyridylmethylamino)-25,26,27,28-tetrapropyloxycalix[4]arene 4a; cone - 5,11,17,23-tetrakis(3-pyridylmethylamino)-25,26,27,28-tetrapropyloxycalix[4]arene 4b; cone - 5,11,17,23-tetrakis(4-pyridylmethylamino)-25,26,27,28-tetrapropyloxycalix[4]arene 4c; cone - 5,11,17,23-tetrakis(ferrocenylmethylamino)-25,26,27,28-tetrapropyloxycalix[4]arene 4d; cone - 5,11,17,23-tetrakis(2-pyridylmethimino)-25,26,27,28-tetrapropyloxycalix[4]arene 3a; cone - 5,11,17,23-tetrakis(3-pyridylmethimino)-25,26,27,28-tetrapropyloxycalix[4]arene 3b; cone - 5,11,17,23-tetrakis(4-pyridylmethimino)-25,26,27,28-tetrapropyloxycalix[4]arene 3c; cone - 5,11,17,23-tetrakis(ferrocenylmethimino)-25,26,27,28-tetrapropyloxycalix[4]arene 3d; cone - 5,11,17,23-tetrakis(2-thienylmethimino)-25,26,27,28-tetrapropyloxycalix[4]arene 3e and cone - 5,11,17,23-tetrakis(2-pyrrolylmethimino)-25,26,27,28-tetrapropyloxycalix[4]arene 3f are reported. The target compounds 4a-4d were designed to form complexes with anions based on hydrogen bonds and electrostatic interactions in acidic aqueous solutions and the interaction constant 1770 mol⁻¹ dm³ of a 1:1 complex was obtained for the interaction of 4c with sulfate anion in 5 × 10⁻³ M aqueous HCl. The solid state structures of the compounds 3b, 3e and 3f were determined, their stereochemistry and the stereochemistry of the calix[4]arene frame is generally discussed. Raman, infrared and UV-vis spectra of the target compounds and some intermediates are reported, too.     

Functionalisation of the upper rim of calix[4]arene via alcoholysis and hydrosilylation reactions

Metalation of 5,17-dibromo-25,26,27,28-tetra propoxy calix[4]arene (1) with n-BuLi in THF at −78 °C gave organolithium reagent, which reacted with Me₂HSiCl to give 5,17-bis(dimethylsilyl)-25,26,27,28-tetra propoxy calix[4]arene (2). The Si-H groups of calixarene 2 were treated with methanol, ethanol, propanol, butanol, pentanol, hexanol, 2-propanol and 2-methyl propanol in the presence of Karstedt catalyst (platinum(0)-1,3-divinyl-1,1,3,3-tetramethyl disiloxane complex, solution in xylene) to give the corresponding 5,17-bis(alkoxydimethylsilyl)-25,26,27,28-tetra propoxy calix[4]arene (3). Moreover, calixarene 2 was easily functionalized with a variety of alkenes using Karstedt catalyst to give the corresponding organosilylated calix[4]arene (4).     

Novel 2,2′-bipyridine-modified calix[4]arenes: ratiometric fluorescent chemosensors for Zn ion

Two calix[4]arene derivatives with modified bipyridine as binding sites have been designed and synthesized. Compounds 1 and 2 are the first 2,2′-bipyridine-modified calix[4]arene-based sensors that can detect Zn²⁺ selectively with respect to ratiometric fluorescent changes and red shift. A binuclear complex structure has been demonstrated in the binding modes of 1-Zn²⁺ and 2-Zn²⁺ complexes.     

Topological and metal ion effects on the anion binding abilities of new heteroditopic receptors derived from p-tert-butylcalix[4]arene

Two derivatives of p-tert-butylcalix[4]arenes 1 and 2 containing diethyl ester and amidoferrocene units as cation and anion binding sites, respectively, have been synthesized. Both compounds were isomeric with different topology for accommodating ions. ¹H NMR spectroscopy, cyclic voltammetry, and square-wave voltammetry were used to study the binding abilities of receptors 1 and 2 toward anions. Both receptors were found to bind Br⁻ and I⁻ selectively in the presence of Na⁺. The electrochemically oxidized ferrocenium form of para-isomer 2 in the free form was found to sense AcO⁻ selectively, but demonstrated a negative sensing in the presence of Na⁺. In contrast, the electrochemically oxidized ferrocenium form of meta-isomer 1 was found to enhance sensing of AcO⁻ and Cl⁻ in the presence of Na⁺.     

Anion recognition by 2,2′-binaphthalene derivatives bearing urea and thiourea groups at 8- and 8′-positions by UV-vis and fluorescence spectroscopies

Synthesis and anion recognition properties of 2,2′-binaphthalene derivatives bearing two thiourea (1) and urea (2) groups at 8- and 8′-positions were studied. The structure of receptor 1 was determined by X-ray crystallography. UV-vis spectra of the receptors showed characteristic changes around 300-400 nm through isosbestic points upon the addition of biologically relevant anions such as acetate, dihydrogenphosphate, and chloride in MeCN and DMSO due to restriction of the rotation around the single bond connecting two naphthyl moieties by cooperative guest binding of two recognition sites. Job’s plots showed 1:1 complexation for guest anions. The fluorescence quantum yields of free form of 1 and 2 in MeCN were determined to be 0.021 and 0.57, respectively. The fluorescence intensities of the receptors diminished upon the addition of anions in MeCN. The association constants of receptors 1 and 2 were one or two orders of magnitude greater than the corresponding monothiourea and urea receptors 3 and 4 indicating cooperative hydrogen bonding with guest anions. The selectivity trends of association of anions were F⁻>AcO⁻>H₂PO₄⁻>Cl⁻>>HSO₄⁻≈NO₃⁻≈Br⁻≈I⁻ for 1, and F⁻>AcO⁻≈Cl⁻>H₂PO₄⁻>Br⁻>HSO₄⁻>I⁻≈NO₃⁻ for 2. Receptor 2 showed remarkable Cl⁻ selectivity presumably owing to suitable orientation for effective hydrogen bond formation with Cl⁻.     

Fluoride-induced intermolecular excimer formation of bispyrenyl thioureas linked by polyethylene glycol chains

New bispyrenyl thioureas linked by polyethylene glycol (PEG) chains, L1-L3, and methoxy benzene pyrene thiourea, L4, were synthesized. Upon binding with F⁻ in CHCl₃, L1-L3 exhibited strong excimer emission bands (I_E) and weak monomer emission bands (I_M), while L4 displayed the same intensity of both bands. However, little or no change was observed in fluorescence spectra of L1 upon adding OH⁻, AcO⁻, BzO⁻, H₂PO₄⁻, Cl⁻, Br⁻, and I⁻. Therefore, only F⁻ induced the pyrene excimer formation. Job’s plots showed 1/1 or 2/2 complexation of L1 with F⁻. Ratios of I_E/I_M of L1·F⁻ complex were dependent on the concentration of L1, implying that the dimerization of L1 proceeded via the intermolecular excimer formation. Among L1-L4, L1 possessed the highest binding constant and sensitivity toward F⁻ implying the importance of the linking PEG chain. L1 was demonstrated to be an excellent probe for F⁻ in CHCl₃ with the detection limit as low as 46.2 μg/L.