Palladium-catalyzed cross-coupling of trimethoxysilylbenzene with aryl bromides and chlorides using phosphite ligands

Phosphites were employed as ligands in palladium-catalyzed Hiyama coupling reactions. The optimized reaction conditions were equimolar amounts (5 mol % each) of Pd(acac)₂ and phosphite 1 in p-xylene at 80 °C with TBAF as an additive. This catalyst system exhibited high activities in the reactions with trimethoxysilylbenzene and aryl bromides that have electron-donating or electron-withdrawing groups. In the case of aryl chlorides, substrates possessing electron-withdrawing groups gave the coupled products in high yields.     

Pd-catalyzed coupling of aryl iodides with triarylbismuths as atom-economic multi-coupling organometallic nucleophiles under mild conditions

The facile cross-coupling reactivity of triarylbismuth compounds with aryl iodides was achieved under mild heating conditions. The established catalytic protocol using Pd(OAc)₂(Cy₂NH)₂ system exhibited high coupling reactivity with a variety of triarylbismuth and aryl iodide compounds under mild conditions. These coupling reactions were completed in short reaction time affording good to high yields of functionalized biaryl products. The studies of multi-coupling reactions with tris(4-iodophenyl)amine, 8 also furnished moderate to good yields of coupled products, 8a-8f.     

Synthesis of substituted aryl enol ethers

A facile route toward substituted aryl diarylvinyl ethers 4 is developed from CuI-mediated cross-coupling reaction of substituted phenols 2 with diarylvinyl bromides 3 in the presence of various bidentate-based ligands in DMF. Skeleton 3 is prepared by Yan’s bromomethylenation of diarylketones 1 with CHBr₃–TiCl₄–Mg in the co-solvent of DME and CH₂Cl₂. The synthetic route obtains moderate yields from the one-step operation and the key structure of 4k is confirmed by X-ray crystallographic analysis. The CADD docking experiments of 4k have been included.     

Dihydrofurocoumarin and dihydrofurodihydropyrid-2-one derivatives via palladium catalysed cascades involving aryl/heteroaryl/vinyl iodides and allene followed by acid catalysed cyclisation

Mono 3-(2′-arylallyl) derivatives of 4-hydroxycoumarin 1a,b, 4-hydroxy-6-methyl-pyran-2-one (3) and 6-hydroxy-1,4-dimethyl-1,2-dihydropyrid-2-one-3-carbonitrile (4) are produced in 3-component cascades involving aryl/heteroaryl/vinyl iodides and allene (1 atm) using Pd(PPh₃)₄/Cs₂CO₃/MeCN/80 °C or Pd₂(dba)₃/tris(2-furyl)phosphine/K₂CO₃/DMF/80 °C as the catalyst system. 4-Hydroxy-2-quinolone (2) afforded a mixture of mono- and bis-allylation products under these conditions. Mono C-allylation products 5a-e and 15a-e undergo facile acid catalysed cyclisation to afford dihydrofurocoumarins 11a-e and dihydrofurodihydropyrid-2-ones 16a-e in good overall yield.     

Microwave-assisted Pd(OH)2-catalyzed direct C−H arylation of free-(NH2) adenines with aryl halides

A direct C−H arylation of free-(NH₂) adenines using Pd(OH)₂/C (Pearlman’s catalyst) and stoichiometric amount of copper iodide under ligandless microwave activation is described. This new protocol proved to be highly effective to synthesize a variety of 8-aryladenine derivatives 3 without prior protection of the amino substituent. The arylation reaction takes place rapidly within few minutes and allows the coupling to proceed regioselectively at the 8-position with a wide range of aryl halides including aryl iodides, bromides and the less reactive aryl chlorides.     

Efficient Suzuki coupling of aryl chlorides catalyzed by tricyclohexylphosphine adducts of cyclopalladated ferrocenylimines

The air and moisture stable tricyclohexylphosphine (PCy₃) adducts of dimeric cyclopalladated ferrocenylimines 5 and 6 have been easily synthesized and successfully used in palladium-catalyzed Suzuki cross-coupling of aryl chlorides. Using 0.1 mol% of 6 in the presence of 2 equivalent of Cs₂CO₃ as base in dioxane at 100 °C provided coupled products in excellent yields in the reaction of non-activated and deactivated aryl chlorides with phenylboronic acid. For activated chlorides such as 4-chloronitrobenzene and 4-chloroacetophenone, the catalyst loadings could be lowered to 0.01 mol% without loss of activity.     

An inexpensive cyclodiphosphazane as an efficient ligand for the palladium-catalyzed amination of aryl bromides and chlorides

An economic and novel ligand, cyclodiphosphazane [ClPN(t-Bu)]₂ (1), was introduced in the palladium-catalyzed amination of unactivated aryl halides. The catalyst allows for the amination of aryl chlorides and bromides with secondary cyclic amines and anilines in good yields.     

Di-t-butyl(ferrocenylmethyl)phosphine: air-stability, structural characterization, coordination chemistry, and application to palladium-catalyzed cross-coupling reactions

Di-t-butyl(ferrocenylmethyl)phosphine (1) has been isolated and structurally characterized. This ligand was found to be reasonably air stable as a solid and it has been shown to possess electron donating ability similar to that of tri-i-propylphosphine. A palladium catalyst bearing this ligand performed room temperature Suzuki-Miyaura coupling reactions with aryl bromides. Modest Heck coupling reactivity with aryl bromides was also observed at 100 °C. Complexation of 1 with Pd₂(dba)₃ led to formation of (1)₂Pd⁰. Addition of 4-bromoanisole to solutions containing both 1 and Pd₂(dba)₃ led to formation of an oxidative addition product when 1:Pd ratios were ?1. With a 2:1 ratio of 1:Pd, monophosphine complex formation and oxidative addition were significantly inhibited.     

A flow chemistry route to 2-phenyl-3-(1H-pyrrol-2-yl)propan-1-amines

The Knoevenagel condensation of pyrrole-2-carboxaldehyde (1) with a range of substituted benzyl nitriles (2a-e) afforded rapid access to a family of α,β-unsaturated nitriles (3a-e) in good yields (67-78%). Flow hydrogenation (ThalesNano H-cube™) at 60 °C, 50 bar H₂ pressure, 1.0 mL/min through a 10% Pd-C catalyst selectively, and quantitatively, hydrogenated the olefin double bond (4a-e). Use of a Raney Nickel catalyst at 70 °C, 70 bar H₂ pressure and flow rates of 0.5-1.0 mL/min afforded quantitative conversion into the corresponding saturated amines with the reduction of both the olefin and nitrile bonds (5a-e). The versatility of this approach was further exemplified by reaction of 5a and 5c with norcantharidin to afford acid amide norcantharidin analogues 7 and 8 as novel protein phosphatase 1 and 2A inhibitors.     

Palladium-catalyzed cross-coupling reaction of ethynylstibanes with organic halides

The reaction of ethynylstibanes (1a-g) with vinyl halides or triflate in the presence of a palladium catalyst led to the formation of cross-coupling products (5a-g, 10-12) in good to moderate yield, along with homo-coupling products (6a-g). A similar reaction of ethynyldiphenylstibane (1a) with aryl iodides (13a-i) also gave cross-coupling products (14a-i), although the yields were relatively low. The yields of the cross-coupling products were highly dependent on the nature of the solvent employed, and good results were obtained when the reaction was carried out in HMPA or amines such as diethylamine and morpholine. The results imply that HMPA and amine used as solvents facilitate transmetallation of the ethynyl group on 1 to the palladium by intermolecular coordination between antimony and oxygen (for HMPA) or nitrogen (for amine).     

Synthesis, structure and catalytic activity of a bimacrocylic NHC palladium allyl complex

The preparation of a bimacrocyclic NHC palladium allyl complex 4 is described. The complex was obtained by transmetalation with allyl palladium chloride dimer from the NHC silver complex 2 in 85% yield. Complex 4 was fully characterized by spectroscopic methods and by single-crystal X-ray analysis. In a preliminary catalytic study, complex 4 showed high activity in the Suzuki-Miyaura cross-coupling of unactivated aryl chlorides and bromides with 1-naphthalene-boronic acid at low catalyst loading. Good results were also obtained in the Mizoroki-Heck reaction of aryl bromides with styrene, but a decrease in yield was observed when aryl chlorides were used.     

Carbohydrate-based phosphines as supporting ligand for palladium-catalyzed Suzuki–Miyaura cross-coupling reaction

Carbohydrate-based mono-phosphines (1 and 2) derived from glucose have been explored as supporting ligand for palladium-catalyzed Suzuki–Miyaura reaction. The combination of phosphine to palladium in a ratio of 2:1 resulted in a longer-living system than that in a ratio of 1:1. Using K₂CO₃ as base, aryl bromides as well as active aryl chlorides can be coupled nearly quantitatively by 0.1–0.2 mol % of 1/Pd(OAc)₂ with 95–99% of isolated yields. The amount of the catalyst could be lowered to 0.01 mol % under the optimized condition with 80% yield at room temperature. The carbohydrate hydroxyl group in 1 was found to contribute to catalytic activity.     

Palladium complexes of 8-(di-tert-butylphosphinooxy) quinoline

The preparation of the new ligand 8-(di-tert-butylphosphinooxy)quinoline (1) and the palladium derivatives [PdCl₂(1)] (2), [Pd(η³-all)(1)]⁺ [all = C₃H₅ (3a), 1-PhC₃H₄ (3b) and 1,3-Ph₂C₃H₃ (3c)] and [Pd(η²-ol)(1)] [ol = dimethyl fumarate (4a) and fumaronitrile (4b)] is reported. The cationic species 3a-3c have been isolated as salts. The complex 3a(BF₄) is obtained either from the reaction of 1 with [Pd(μ-Cl)(η³-C₃H₅)]₂ or from the reaction of ClP(CMe₃)₂ with [Pd(η³-C₃H₅)(8-oxyquinoline)], followed in both cases by chloride abstraction with NaBF₄. In the complexes, the ligand 1 is P,N chelated to the central metal, as shown by the X-ray structural analysis of 3a(BF₄). At 25 °C in solution, 3a(BF₄) and 3b(BF₄) undergo a fast η³−η¹−η³ dynamic process which brings about a syn-anti exchange only for the allylic protons cis to phosphorus, while for 4a and 4b a slow rotation of the olefin around its bond axis to palladium takes place. The complexes 2 and 3a(BF₄) are efficient catalyst precursors in the coupling of the phenylboronic acid with aryl bromides and chlorides.     

Synthesis of cobalt-containing monodentate phosphine ligand and application toward Suzuki cross-coupling reactions

A bulky, dicobalt complexed, mono-dentate phosphine, [(μ-PPh₂CH₂PPh₂)Co₂(CO)₄](μ,η-PhCCPCy₂) (4), was prepared from the reactions of the bis(diphenylphosphino)methylene (dppm)-bridged dicobalt complex Co₂(CO)₆(μ-Ph₂PCH₂PPh₂) (2) with PhCCPCy₂ (3). Combination of 4 and Pd(OAc)₂ (1:1) gave an active catalyst for the palladium-catalyzed Suzuki coupling of aryl bromides with phenylboronic acid; the catalytic reactions can be performed even under low catalyst loadings (0.1-0.001 mol% 4/Pd(OAc)₂). Compound 4 has been proved to be an authentic and effective mono-dentate phosphine ligand. Crucial factors such as 4/Pd(OAc)₂ ratio, base being used, solvent volume, temperature, and electronic variation of the aryl bromides in reactions were also investigated and results are reported.     

Selective displacement of aryl fluorides with hydroquinone: synthesis of 4-phenoxyphenols

The selective displacement of a variety of aryl fluorides with hydroquinone has been achieved to give substituted 4-phenoxyphenols 3. In some cases the addition of 18-crown-6 resulted in a significant rate enhancement, and the reactions could be carried out at lower temperature. One of these derivatives, 3a (X = Cl) was converted to 2-propyl-4-(4-chlorophenoxy)phenol 2a, a precursor to the PPARγ receptor agonist 1.     

Triaryl phosphine-functionalized N-heterocyclic carbene ligands for Heck reaction

A new type of triaryl phosphine-functionalized imidazolium salts 6 were prepared. Their palladium complexes, generated in situ, were successfully applied in the palladium-catalyzed Heck reaction. Using 1 mol% of Pd(dba)₂ and 1 mol% 6c in the presence of 2 equiv of K₂CO₃ in DMAc has proven to be highly efficient for the coupling of a wide array of aryl bromides and iodides with acrylates in excellent yield. The coupling of 4-bromotoluene with various styrene derivatives catalyzed by Pd/6c complex also gave good results.     

Palladium-catalyzed C–S bond formation by using N-amido imidazolium salts as ligands

N-Amido imidazolium salt was employed as a ligand in the palladium-catalyzed cross-coupling reaction of aryl halides and thiols, and showed good activity in the formation of thioether. The best combination for the coupling with aryl bromides was N-amido imidazolium salt 2 and NaHMDS, and that for the coupling with aryl iodides was N-amido imidazolium salt 1 and KO^tBu. The coupling reactions were conducted in the presence of Pd(OAc)₂ (1 mol %) in DMSO at 80 °C for 12 h.     

Synthesis and characterizations of N,N,N′,N′-tetrakis (diphenylphosphino)ethylendiamine derivatives: Use of palladium(II) complex as pre-catalyst in Suzuki coupling and Heck reactions

Oxidation of N,N,N′,N′-tetrakis(diphenylphosphino)ethylendiamine (1) with elemental sulfur and selenium gives the corresponding sulfide and selenide, respectively, [(Ph₂P(E))₂NCH₂CH₂N(P(E)Ph₂)₂] (E: S 1a, Se 1b). Complexes of 1 [(M₂Cl₄){(Ph₂P)₂NCH₂CH₂N(PPh₂)₂}] (M: Ni(II) 1c, Pd(II) 1d, Pt(II) 1e) were prepared by the reaction of 1 with NiCl₂ or [MCl₂(COD)] (M = Pd, Pt). The new compounds were characterized by NMR, IR spectroscopy and elemental analysis. The catalytic activity of Pd(II) complex 1d was tested in the Suzuki coupling reaction and Heck reaction. The palladium complex 1d catalyses the Heck reaction between styrene and aryl bromides as well as Suzuki coupling reaction between phenylboronic acid and arylbromides affording stilbenes and biphenyls in high yield, respectively.     

Preparation of 2,2-difluoro-1-trialkylsilylethenylstannanes and their cross-coupling reactions

Reaction of 2 with bis(tributyltin) in the presence of 3 mol % Pd₂(dba)₃, 6 mol % XPhos, and 30 equiv of LiBr in wet and air bubbled THF at reflux for 8 h afforded the desired products 3 in 73–74% yields. The cross-coupling reaction of 3a with aryl iodides in the presence of 10 mol % Pd(PPh₃)₄ and 10 mol % CuI afforded the coupled products 4a–p in 47–90% yields. The coupling reaction of 3b with various alkynyl bromides having aryl-, alkyl, or trialkylsilyl group also afforded the corresponding 1,3-enynes 5a–g in 61–77% yields.     

A practical synthesis of highly functionalized aryl nitriles through cyanation of aryl bromides employing heterogeneous Pd/C

An industrially viable cyanation of aryl bromides with Zn(CN)₂ was accomplished in the presence of inexpensive and readily accessible Pd/C, Zn dust, ZnBr₂, and PPh₃ in DMA to provide functionalized aryl nitriles in moderate to high yields.