Practical synthesis of S-alkyl thiocarbamate herbicides by carbonylation of amines with carbon monoxide and sulfur

An industrial and economic carbonylation of amines with carbon monoxide and sulfur has been developed for the synthesis of S-alkyl thiocarbamate herbicides. In the presence of potassium carbonate and solvent DMSO, S-alkyl thiocarbamates, such as thiobencarb and orbencarb (herbicides) are synthesized in excellent yields from amines, carbon monoxide, sulfur, and alkyl halides under mild conditions (1 atm, 20 °C).     

Facile S-alkyl thiocarbamate synthesis by a novel DBU-assisted carbonylation of amines with carbon monoxide and sulfur

A novel DBU-assisted carbonylation of amines with carbon monoxide and sulfur has been developed for the synthesis of S-alkyl thiocarbamates. In the presence of DBU (1,8-diazabicyclo[5.4.0]undec-7-ene), S-alkyl thiocarbamates are synthesized in excellent yields from amines, carbon monoxide, sulfur, and alkyl halides under mild conditions (1 atm, 20°C). In the absence of DBU, however, no formation of S-alkyl thiocarbamate is observed. The present DBU-assisted carbonylation can also be applied to new synthetic methods for benthiocarb and orthobencarb (herbicides) and carbamoyl chlorides.     

A simple one-pot procedure for the direct conversion of alcohols into alkyl nitriles using TsIm

A convenient and efficient one-pot preparation of nitriles from alcohols using N-(p-toluenesulfonyl)imidazole (TsIm) is described. In this method, treatment of alcohols with a mixture of NaCN, TsIm and triethylamine in the presence of catalytic amounts of tetra-n-butylammonium iodide (TBAI) in refluxing DMF furnishes the corresponding alkyl nitriles in good yields. This methodology is highly efficient for various structurally diverse alcohols with selectivity for ROH: 1° > 2° > 3°.     

A simple one-pot procedure for the direct conversion of alcohols into azides using TsIm

A facile and efficient method for one-pot conversion of alcohols into azides using N-(p-toluenesulfonyl)imidazole (TsIm) is described. In this method, alcohols are refluxed with a mixture of NaN₃, TsIm and triethylamine in the presence of catalytic amounts of tetra-n-butylammonium iodide (TBAI) in DMF affording the corresponding alkyl azides in good yields. This methodology is highly efficient for various structurally diverse alcohols with selectivity for ROH: 1° > 2° > 3°.     

A simple procedure for the esterification of alcohols with sodium carboxylate salts using 1-tosylimidazole (TsIm)

An efficient and selective method for esterification of alcohols using N-(p-toluenesulfonyl)imidazole (TsIm) is described. In this method, alcohols are refluxed with a mixture of RCO₂Na (R: alkyl and aryl), TsIm, and triethylamine in the presence of catalytic amounts of tetra-n-butylammonium iodide (TBAI) in DMF to afford the corresponding esters in good yields. This methodology is highly efficient for various structurally diverse alcohols with selectivity for ROH: 1° > 2° > 3°.     

Microwave-assisted cycloadditions of 2-alkynylbenzonitriles with sodium azide: selective synthesis of tetrazolo[5,1-a]pyridines and 4,5-disubstituted-2H-1,2,3-triazoles

Under microwave irradiation (75 W), treatment of 2-alkynylbenzonitriles with 1.5 equiv of sodium azide in DMSO at 140 °C gave 4,5-disubstituted-2H-1,2,3-triazoles in 60-99% yields. Additionally, adding 8 equiv of ZnBr₂ and using 8 equiv of sodium azide in DMF at 100 °C lead to the formation of tetrazolo[5,1-a]isoquinolines up to 87% yield.     

Determination of ethylenediaminetetraacetic acid, ethylenediaminedisuccinic acid and iminodisuccinic acid in cosmetic products by capillary electrophoresis and high performance liquid chromatography

A capillary electrophoresis (CE) and a high performance liquid chromatography (HPLC) method are described for the simultaneous determination of ethylenediaminetetraacetic acid (EDTA), S,S′-ethylenediaminedisuccinic acid (EDDS) and R,S-iminodisuccinic acid (IDS) complexing agents as their Fe(III) complexes in cosmetics like shower cream and foam bath. The non-biodegradable EDTA is used in combination with biodegradable analogues like EDDS and IDS in many commercial products. The HPLC method involves separation by reversed-phase ion pair chromatography on a C₁₈ column using methanol-formate buffer (20 mM tetrabutylammonium hydrogen sulfate, 15 mM sodium formate adjusted to pH 4.0 with formic acid) (10:90, v/v) as mobile solvent at a flow rate of 0.8 mL min⁻¹ at 24 °C using UV detection at 240 nm. The CE separation was performed in a fused silica capillary of 50 μm i.d. with the total length of 50 cm with a 10 mM MES and MOPSO (pH 5.5) at an applied voltage of −25 kV. The samples were introduced by applying a 50 mbar pressure for 2 s. Absorbances at 215 and 225 nm were monitored for the detection of the complexes. The methodology performance of the two methods was evaluated in terms of linearity, limit of detection (LOD), limit of quantitation (LOQ) and reproducibility. The LOD values obtained from HPLC are low when compared with CE. The applicability of both the methods was demonstrated for the analysis of cosmetic products such as shower cream and foam bath. The results obtained by both CE and HPLC were found to be comparable and in good agreement.     

Rearrangement of N-alkyl 1,2-amino alcohols. Synthesis of (S)-toliprolol and (S)-propanolol

N-alkyl 1,2-amino alcohols were rearranged stereospecifically by using TFAA/Et₃N. This rearrangement has been used to synthesize N-isopropyl-3-(aryloxy)-2-hydroxypropylamines, β-adrenergic blocking agents such as (S)-toliprolol and (S)-propanolol.     

Chiral separation of (R,S)-2-phenyl-1-propanol through cellulose acetate butyrate membranes

As the cellulose acetate butyrate possessed multichiral carbon atoms in its molecular structure unit, enantioselective membrane was prepared using cellulose acetate butyrate as membrane material. The flux and permselective properties of membrane using aqueous solutions of (R,S)-2-phenyl-1-propanol as feed solution was studied. The top surface and cross-section morphology of the resulting membranes were examined by scanning electron microscopy. When the membrane was prepared with 15 wt.% cellulose acetate butyrate and 20 wt.% DMF in the casting solution, and the operating pressure and feed concentration of racemate were 2 kgf/cm² and 5 mmol/L, respectively, over 98% of enantiomeric excess (e.e.) was obtained. This is a report, for the first time, that the cellulose acetate butyrate is used as optical resolution membrane material for isolating the optical isomers of (R,S)-2-phenyl-1-propanol.     

Synthesis,spectroscopic and structural characterization of diphenyltin(IV) complexes of acetone Schiff bases of S-alkyldithiocarbazates

New diphenyltin(IV) complexes of empirical formula, [Sn(C₆H₅)₂(NS)Cl] (NS = anionic forms of the acetone Schiff bases of S-methyl or S-benzyldithiocarbazate) have been prepared and characterized by IR, NMR and Mössbauer spectroscopic techniques. The crystal and molecular structures of the acetone Schiff bases of S-methyldithiocarbazate (Hacsme) and S-benzyldithiocarbazate (Hacsbz) and their tin(IV) complexes have been determined by X-ray diffraction. In the solid state, both the Schiff bases exist in their thioketo tautomeric forms with the azomethine nitrogen atom trans to the thione sulfur atom but in the tin(IV) complexes they are present in their deprotonated ene-thiolate forms being coordinated to the tin atom as bidentate chelating agents via the azomethine nitrogen and thiolate sulfur atoms. The tin atom adopts a five-coordinate, approximately trigonal bipyramidal geometry, with the thiolate sulfur atom of the Schiff base and the two phenyl groups occupying the equatorial positions. The azomethine nitrogen atom and the chlorine ligand occupy axial positions. The distortion from a regular trigonal bipyramidal or a square-pyramidal geometry is attributed to the restricted bite sizes of the five-membered chelate rings.     

Synthesis and regioselective substitution of C-6 alkoxy derivatives of (S)-nicotine

Enantiopure (S)-6-alkoxynicotine derivatives have been synthesized in two steps from (S)-nicotine via (S)-6-iodonicotine. Deprotonation and substitution at the C-5 position of the pyridine ring of (S)-6-methoxynicotine were achieved using mesityllithium as the base at 0 °C. Conditions for the C-4 lithiation/substitution of (S)-6-isopropoxynicotine and (S)-5-chloro-6-methoxynicotine were also developed.     

Fluorinated phosphorus compounds: Part 10. Bis(fluoroalkyl) S-alkyl phosphorothiolates and tris(fluoroalkyl) phosphorothionates

Treatment of bis(fluoroalkyl) phosphites (R_FCH₂O)₂P(O)H, where R_F was CF₃ or C₂F₅ with sulfur in pyridine at 80 °C gave salts of structure [(R_FCH₂O)₂P(O)SH]NC₅H₅ in 90 and 88% yield, respectively. The salts reacted with alkyl iodides in acetonitrile at 50 °C to furnish bis(fluoroalkyl) S-alkyl phosphorothiolates (R_FCH₂O)₂P(O)SR, where R was Me, Et, n- and i-Pr (when R_F = CF₃) and Me (when R_F = C₂F₅). Yields ranged from 21 to 57%. Bis(trifluoroethyl) S-methyl phosphorothiolate (CF₃CH₂O)₂P(O)SMe underwent fluorination by silver(I) fluoride in acetonitrile at room temperature to yield the phosphorofluoridate (CF₃CH₂O)₂P(O)F in 75% yield. Tris(fluoroalkyl) phosphorothionates (R_FCH₂O)₃P = S, where R_F was CF₃, C₂F₅ and C₃F₇, were prepared in 30-34% yield by heating the tris(fluoroalkyl) phosphites (R_FCH₂O)₃P and sulfur to 200 °C in a sealed tube for 8 h.     

Complex formation equilibria between Ag(I) and thioureas in n-propanol

Complex formation equilibria between Ag(I) and thiourea or N-alkyl-substituted thioureas have been investigated in n-propanol by potentiometry at 10 °C intervals from 5 to 50 °C. Stepwise formation of tris-coordinated AgL_n (n = 1-3) complexes has been found for the majority of the ligands. ΔH and ΔS values for the complex formation reactions have been evaluated from the dependence of ln β_n on temperature. The alkyl-substituents affect the ligand affinities in different ways in relation with the coordination level n.The reactions are exothermic with few exceptions. Enthalpy favoured complex formation with negative dependence of ΔG on temperature (ΔS > 0) have been found.The enthalpy and entropy changes for the stepwise complex formation equilibria are correlated by two linear compensative relationships with the same isoequilibrium temperature 50-51 °C.     

Vapor–liquid equilibria for water + acetic acid + (N,N-dimethylformamide or dimethyl sulfoxide) at 13.33 kPa

Isobaric vapor–liquid equilibrium (VLE) data of the systems acetic acid + N,N-dimethylformamide (DMF), acetic acid + dimethyl sulfoxide (DMSO), DMSO + water, water + acetic acid + DMF, and water + acetic acid + DMSO have been measured at 13.33 kPa by using an improved Rose equilibrium still. The association of acetic acid in vapor phase has been considered, and the nonideality of vapor phase was accounted for using the Hayden–O’Connell (HOC) method. The experimental binary data have been correlated by the NRTL, Wilson and van Laar models. The NRTL model parameters obtained from the binary data have been used to predict the ternary VLE data. The ternary predicted values obtained in this way agree well with the experimental values.     

Three practical approaches for the synthesis of novel 4,7-dihetarylpyrazolo[1,5-a][1,3,5]triazines

Novel 4,7-dihetarylpyrazolo[1,5-a][1,3,5]triazines were synthesized from three different approaches. The first one, involved a one-step reaction between 5-amino-3-hetaryl-1H-pyrazoles and O,S-diethyl hetaroylimidothiocarbonates or S,S-diethyl hetaroylimidodithiocarbonates under solvent-free conditions employing microwave irradiation as the energy source. In the second approach, conventional heating under reflux in DMF as solvent was used instead of the microwave irradiation; and the third one was achieved from a two-step sequence through the treatment of 5-amino-3-hetaryl-1H-pyrazoles with hetaroyl isothiocyanates and the subsequent S-alkylation and cyclization process in DMF as solvent. Some intermediates were isolated and characterized to support the regiochemistry of the studied reactions. The structures of the new compounds were unambiguously established by spectroscopic and analytical techniques.     

A short-cut from 1-acetyl adamantane to 2-(1-adamantyl)pyrroles

The oxime of 1-acetyl adamantane 2 is added to acetylene (KOH/DMSO, 70 °C, initial acetylene pressure 13 atm, 30 min) to afford the corresponding O-vinyl oxime 5 in 80% yield. The latter upon heating (DMSO, 120 °C, 1 h) gives 2-(1-adamantyl)pyrrole 3, 1-acetyl adamantane 1, and adamantane (6:3:1 mass ratio), the yield of the pyrrole 3 being 83% (based on 1-acetyl adamantane 1 consumed). Under harsher conditions (NaOH/DMSO, 130 °C, atmospheric pressure of acetylene, 4 h) oxime 2 reacts with acetylene to furnish pyrrole 3, 1-acetyl adamantane 1, 1-vinyl adamantane 9, and adamantane (6:7:3:1 mass ratio), with the isolated yield of pyrrole 3 reaching 34%. Under pressure (NaOH/DMSO, 120 °C, initial acetylene pressure 14 atm, 1 h) the same reaction leads to 2-(1-adamantyl)-1-vinylpyrrole 4 and ketone 1 in 48% (based on consumed ketone 1) and 24% yields, respectively. The pyrrole 4 is easily deprotected to the corresponding 1H-pyrrole 3 in 77% yield by treatment (aqueous MeCN) with Hg(OAc)₂ and NaBH₄.     

Preparation,spectroscopic characterization and X-ray crystal and molecular structures of nickel(II), copper(II) and zinc(II) complexes of the Schiff base formed from isatin and S-methyldithiocarbazate (Hisa-sme)

Complexes of general formula, [M(isa-sme)₂] · n(solvate) [M = Ni²⁺, Cu²⁺, Zn²⁺, Cd²⁺; isa-sme = monoanionic form of the Schiff base formed by condensation of isatin with S-methyldithiocarbazate; n = 1 or 1.5; solvate = MeCN, DMSO, MeOH or H₂O] have been synthesized and characterized by a variety of physicochemical techniques. An X-ray crystallographic structure determination of the [Ni(isa-sme)₂] · MeCN complex reveals a six-coordinate, distorted octahedral geometry. The two uninegatively charged, tridentate, Schiff base ligands are coordinated to the nickel(II) ion meridionally via the amide O-atoms, the azomethine N-atoms and the thiolate S-atoms. By contrast, the crystal structure of [Zn(isa-sme)₂] · MeOH shows a four-coordinate distorted tetrahedral geometry. The two dithiocarbazate ligands are coordinated as N, S bidentate chelates with the amide O-atom not coordinated. The structure of the copper(II) complex [Cu(isa-sme)₂] · DMSO is complicated and comprises two different complexes in the asymmetric unit, one four- and the other five-coordinate. The four-coordinate copper(II) has a distorted (flattened) tetrahedral geometry as seen in the Zn(II) analogue whereas the five-coordinate copper(II) has a distorted square-pyramidal geometry with one ligand coordinated to the copper(II) ion as a tridentate (N, S, O) ligand and the other coordinated as a bidentate N, S chelate. EPR spectroscopy indicates that in solution only one form is present, that being a distorted tetrahedral complex.     

Comparison of supercritical fluid and Soxhlet extractions for the quantification of hydrocarbons from Euphorbia macroclada

This study compares conventional Soxhlet extraction and analytical scale supercritical fluid extraction (SFE) for their yields in extracting of hydrocarbons from arid-land plant Euphorbia macroclada. The plant material was firstly sequentially extracted with supercritical carbon dioxide, modified with 10% methanol (v/v) in the optimum conditions that is a pressure of 400 atm and a temperature of 50 °C and then it was sonicated in methylene chloride for an additional 4 h. E. macroclada was secondly extracted by using a Soxhlet apparatus at 30 °C for 8 h in methylene chloride. The validated SFE was then compared to the extraction yield of E. macroclada with a Soxhlet extraction by using the Student’s t-test at the 95% confidence level. All of extracts were fractionated with silica-gel in a glass column to get better hydrocarbon yields. Thus, the highest hydrocarbons yield from E. macroclada was achieved with SFE (5.8%) when it compared with Soxhlet extractions (1.1%). Gas chromatography (GC) analysis was performed to determine the quantitative hydrocarbons from plant material. The greatest quantitative hydrocarbon recovery from GC was obtained by supercritical carbon dioxide extract (0.6 mg g⁻¹).     

A novel P,S-heterodonor ligand and palladium(0) complex catalyzed Suzuki cross-coupling reaction

Axially dissymmetric P,S-heterodonor ligand L3 synthesized from BINOL is an effective promoter in the palladium(0)-catalyzed Suzuki cross-coupling reaction of phenylboronic acid with aryl bromides and iodide at 60-80 °C. On the basis of ¹³C and ³¹P NMR spectroscopic investigation and X-ray diffraction, it was revealed that N,N-dimethylthiocarbamate-phosphine ligand L3 might be a P,S-heterodonor bidentate ligand to palladium(0) center.     

Palladium-catalyzed synthesis of quinoxaline derivatives

A palladium-catalyzed reductive N-heteroannulation of enamines derived from 2-nitrobenzenamines forming mixtures of 1,2-dihydroquinoxalines and 3,4-dihydroquinoxalin-2-ones is described. The reactions are performed using bis(dibenzylideneacetone)palladium(0), 1,3-bis(diphenylphosphino)propane, and 1,10-phenanthroline in DMF under 6 atm of carbon monoxide at 70 °C.