Simple and sensitive quantification of bioactive peptides in biological matrices using liquid chromatography/selected reaction monitoring mass spectrometry coupled with trichloroacetic acid clean-up

A simple and sensitive liquid chromatography/electrospray ionization tandem mass spectrometric (LC/ESI-MS/MS) method has been developed for the quantification of bioactive peptides in biological fluids. The method employs protein precipitation with 4% trichloroacetic acid (TCA) and selected reaction monitoring (SRM) using an immonium ion as the product ion. This method was applied to determine the synthetic parathyroid hormone (PTH) analog (MW 1721) in rat plasma and human hepcidin-25 (MW 2789) in human serum. TCA clean-up showed a sufficient recovery for peptides with a MW of less than 3000, and would be useful as a simple and rapid method because of direct injection of the supernatant without evaporation or dilution. In addition, TCA clean-up allowed us not only to reduce sample preparation time, but also to select an immonium ion as a product ion of SRM, which led to detection more sensitive than SRM using other types of product ions. The lower limits of quantitation (LLOQs) of the PTH analog and the human hepcidin-25 were 0.2 ng/mL and 5 ng/mL, respectively. This method was fully validated with acceptable linearity, intra- and inter-assay precisions, and accuracy. Furthermore, this simple and rapid method is applicable to pharmacokinetic studies.     

Quantification of buserelin in a pharmaceutical product by multiple-injection CZE

An efficient and rapid separation method based on reversed-polarity multiple-injection CZE (MICZE), has been developed for the quantification of buserelin in a pharmaceutical product. The determinations were performed by serially injecting five standard solutions of buserelin (50-300 microg/mL) and one reference analyte into a Polybrene-coated capillary. All the samples contained goserelin, an analog peptide to buserelin, as internal standard (IS). Immediately after pressure injection, the applied sample plugs were subjected to electrophoresis for 2 min at -25 kV. Consequently, each sample plug became isolated from its neighboring plugs by the BGE, composed of 100 mM phosphate-triethanolamine buffer at pH 3.0 containing 10% v/v ACN. During separation the individual sample components migrated at similar velocities and as distinct zones through the capillary giving 24 peaks, 12 from the analyte and the IS and 12 from the sample matrix. The buserelin content of the pharmaceutical product was determined to be 0.94 +/- 0.05 mg/mL, which is only a slight deviation from the declared concentration (1 mg/mL).     

Total Synthesis of the Natural Product-Pinosylvin and its Analog

Polyhydroxy stilbenes were proved to have many biological activitiesl'2. 'We havereported the total synthesis of tWo natural products-resveratrol (3,5,4'-tTihydroxylstilbene) and isorhapontigenin 3'4 which were first found in a traditional Chinese herb,G.Parvghlium by M. Lins et al. Herein,we want to present the total synthesis of anothernatural hydroxyl stilbene, pinosylvin (3,5-dihydroxy stilbene,10) isolated from this plantand its analog (3,5,3',5'-tetfahydroxy stilbene,9 ). In the synth…     

环糊精基阻抗型传感器的制备及对L-半胱氨酸的识别

借助量子化学计算,从分子层面模拟了γ-环糊精(γ-CD)主体与L-半胱氨酸(L-Cys)氧化产物客体之间的超分子相互作用,得到γ-CD与L-Cys氧化产物之间的弱相互作用能EL(-12. 6 e V),其与D-Cys氧化产物客体的弱相互作用能(E_D=-2. 7 e V)相差3. 7倍,分子内氢键键价相差近1倍.据此,构建了基于手性源γ-环糊精的阻抗型传感器,并用于L-Cys的阻抗识别.结果表明,以铁氰化钾(Ⅱ/Ⅲ)作为氧化还原探针分子,电化学阻抗信号变量(R_et)与L-Cys浓度在0. 1～1. 0μmol/L(阶段一)和1. 0～6. 0μmol/L(阶段二) 2个范围内分别呈现良好的线性关系,检出限为74 nmol/L(S/N=3).与未修饰玻碳电极相比,L-Cys在该手性传感器上的阻抗响应灵敏度提高了约19倍,对含巯基结构相似物的选择性明显提高;将该传感器应用于人体血清、药品胶囊样品的分析,平均回收率在88. 9%～108%之间.建立了一种新颖、低成本、简便的针对弱电活性手性化合物的定量识别方法,为其电化学分析提供了新策略.     

1,5-dimethyl-6H-pyridazino[4,5-b]carbazole,a 3-aza bioisoster of the antitumor alkaloid olivacine

A series of b-fused carbazoles structurally related to pyrido[4,3-b]carbazole-type alkaloids was prepared, utilizing the Diels-Alder reaction of 1-methylpyrano[3,4-b]indol-3(9H)-one with electron-deficient acetylenic dienophiles as the key step. The title compound (14) thus obtained in only four steps represents a new 3-aza analog of the antitumor natural product, olivacine.     

Total synthesis of (-)-CP2-disorazole C1

The total synthesis of a bis-cyclopropane analog of the antimitotic natural product (-)-disorazole C(1) was accomplished in 23 steps and 1.1% overall yield. A vinyl cyclopropane cross-metathesis reaction generated a key (E)-alkene segment of the target molecule. IC(50) determinations of (-)-CP(2)-disorazole C(1) in human colon cancer cell lines indicated low nanomolar cytotoxic properties. Accordingly, this synthetic bioisostere represents the first biologically active disorazole analog not containing a conjugated diene or polyene substructure element.     

Micellar electrokinetic chromatography for the simultaneous determination of ketorolac tromethamine and its impurities. Multivariate optimization and validation

A simple, fast and selective micellar electrokinetic chromatographic (MEKC) method for the simultaneous assay of ketorolac tromethamine and its known related impurities (1-hydroxy analog of ketorolac, 1-keto analog of ketorolac and decarboxylated ketorolac), in both drug substance and coated tablets, is described. The compounds were detected at 323 nm, and flufenamic acid (FL) and tolmetin (TL) were chosen as internal standards to quantify ketorolac tromethamine and impurities, respectively. The multivariate optimization of the experimental conditions was carried out by means of the response surface study, considering as responses the resolution values and analysis time. The optimized background electrolyte (BGE) consisted of a mixture of 13 mM boric acid and phosphoric acid, adjusted to pH 9.1 with 1 M sodium hydroxide, containing 73 mM sodium dodecyl sulfate (SDS). Optimal temperature and voltage were 30 degrees C and 27 kV. Applying these conditions, all compounds were resolved in about 6 min. The related substances could be quantified up to the 0.1% (w/w) level. Validation was performed, either for drug substances and drug product, evaluating selectivity, robustness, linearity and range, precision, accuracy, detection and quantitation limits and system suitability.     

Fragmentation of Moxifloxacin and Its Analogs by Electrospray Ionization Time-of-Flight Mass Spectrometry

The fragmentation of patterns of moxifloxacin, 2-N-methylated moxifloxacin (analog 1), and 1-cyclopropyl-6,7-difluoro-8-methoxy-4-oxo-3-quinolinecarboxylic acid (analog 2) were investigated by electrospray ionization quadrupole time-of-flight tandem mass spectrometry in the positive-ion mode. Many unusual ions were detected in the tandem mass spectra of moxifloxacin. Although the structures of moxifloxacin and analog 1 were similar, the relative abundances of products varied greatly. Comparison of the relative abundances of the product ions that lost CO₂ or H₂O and complementary product ions resulting from sequential four-membered hydrogen rearrangement showed that the differences were related to the protonation sites. The loss of HF, probably though the formation of an ion/neutral complex, is of scientific interest. The identities of the major product ions were confirmed by deuterium-labeling experiments that demonstrated an unusual loss of a deuterium atom. The major differences in fragmentation patterns were compared to previous reports in the literature.     

Intramolecular migration of long chain acyl group of enacyloxin IIa methyl ester

Enacyloxin IIa methyl ester in non-protic solvent gave rearranged product in acidic conditions such as surface of TLC plate of silica gel or by treatment with a catalytic amount of p-toluenesulfonic acid. On the other hand, such a rearrangement did not occur in polar protic solvent. The structure of the rearranged product was elucidated as 4-acyl analog of the cyclohexane ring.     

Synthetic and computational studies on liphagal: a natural product inhibitor of PI-3K

The natural product liphagal has been shown to function as a reasonably potent and selective inhibitor of the key signaling enzyme PI-3Kα. We have been interested in developing an analog class of PI-3K inhibitors based upon this unusual terpenoid natural product. Toward that end, we have evaluated the binding of the natural product to its target protein computationally and formulated a class of simplified analogs based on the structural analysis. Utilizing the cycloadduct derived from tetrabromocyclopropene and furan, we were able to generate a key, versatile scaffold upon which to pursue this analog design.     

Solid-phase synthesis of lysobactin (katanosin B): insights into structure and function

The solid phase synthesis of the cyclic depsipeptide antibiotic lysobactin is described. The natural product was synthesized via a linear approach using mostly an Fmoc-strategy solid phase peptide synthesis (SPPS) with a single purification. A lysobactin analog has also been synthesized displaying nanomolar membrane disruption activity not seen with the natural product.     

OMP decarboxylase: phosphodianion binding energy is used to stabilize a vinyl carbanion intermediate

Orotidine 5'-monophosphate decarboxylase (OMPDC) catalyzes the exchange for deuterium from solvent D(2)O of the C-6 proton of 1-(β-d-erythrofuranosyl)-5-fluorouracil (FEU), a phosphodianion truncated product analog. The deuterium exchange reaction of FEU is accelerated 1.8 × 10(4)-fold by 1 M phosphite dianion (HPO(3)(2-)). This corresponds to a 5.8 kcal/mol stabilization of the vinyl carbanion-like transition state, which is similar to the 7.8 kcal/mol stabilization of the transition state for OMPDC-catalyzed decarboxylation of a truncated substrate analog by bound HPO(3)(2-). These results show that the intrinsic binding energy of phosphite dianion is used in the stabilization of the vinyl carbanion-like transition state common to the decarboxylation and deuterium exchange reactions.     

Integrated microelectronic device for label-free nucleic acid amplification and detection

We present an integrated microelectronic device for amplification and label-free detection of nucleic acids. Amplification by polymerase chain reaction (PCR) is achieved with on-chip metal resistive heaters, temperature sensors, and microfluidic valves. We demonstrate a rapid thermocycling with rates of up to 50 degrees C s(-1) and a PCR product yield equivalent to that of a bench-top system. Amplicons within the PCR product are detected by their intrinsic charge with a silicon field-effect sensor. Similar to existing optical approaches with intercalators such as SYBR Green, our sensing approach can directly detect standard double-stranded PCR product, while in contrast, our sensor does not require labeling reagents. By combining amplification and detection on the same device, we show that the presence or absence of a particular DNA sequence can be determined by converting the analog surface potential output of the field-effect sensor to a simple digital true/false readout.     

PROPOSED STRUCTURE OF THE TUMOR-LOCALIZING FRACTION OF HPD (HEMATOPORPHYRIN DERIVATIVE)

Abstract— Synthesis of the tumor-localizing preparation HPD (hematoporphyrin derivative) results in the formation of dimers and oligomers of hematoporphyrin joined by labile linkages. Studies with HPD and an HPD analog containing the chlorin analog of mesoporphyrin suggest the presence of two different linkages, either of which yields a tumor-localizing product. One such linkage is apparently derived from a hematoporphyrin-based oligomer present in commercial preparations of hematoporphyrin as an impurity. The other linkage is formed during the chemical steps leading to the conversion of hematoporphyrin to "HPD".     

Synthesis of Novel Nucleoside Analog （3R）-2,3-Dideoxy-3-（N-hydroxy-N-methylamino）-L-arabinofuranosyl Uracil

The synthesis of novel nucleoside analog (3R)-2,3-dideoxy-3-(N-hydroxy-N-methylamino)-L-arabinofuranosyl uracil was studied. A twelve-step synthetic route, started from L-ascorbic acid, was designed, and the final product was obtained in 20.8% yield.     

A facile synthesis of ( -deoxypseudophrynaminol

A one-step synthesis of ( )-deoxypseudophrynaminol, a racemic deoxy analog of the natural product pseudophrynaminol, is described.     

Bis(dimesitylmethylene)-1,3-dithietane, -1,2,4-trithiane, and -1,2,4,5-tetrathiane. Conformation and DNMR Study. Observable Dimesityl Thioketene

The reaction of dimesityl ketene with P(2)S(5) and pyridine gives 2,4-bis(dimesitylmethylene)-1,3-dithietane (3), 3,6-bis(dimesitylmethylene)-1,2,4,5-tetrathiane (4), 3,5-bis(dimesitylmethylene)-1,2,4-trithiane (5), and dimesityl thioketene 2 as a transient. The structures of 3 and 4 were determined by X-ray crystallography. The dimesitylmethylene moieties in 3 and 4 have a propeller conformation, and the tetrathiane ring in 4 has a twist-boat conformation. Static NMR data are consistent with the presence of two enantiomers and one meso form for 3 and of three pairs of enantiomers for 4. The several aromatic signals observed for 3 and 4 at slow exchange at 160 K coalesce to a single signal at higher temperatures. The threshold barriers for these dynamic processes are 12.7 (3) and 13.3 (4) kcal mol(-)(1), and the dynamic behavior was analyzed in terms of flip processes. On standing, a solution of 3 develops a blue color which is attributed to formation of 2, by retro-dimerization of 3. Diphenylacetyl chloride gives with P(2)S(5) the analog of 5 and its one-double bond reduction product. Ditipylketene forms a product identified tentatively as the analog of 3.     

Sequential Benzylic Oxidation of Naloxone 3-Methyl Ether

Naloxone 3-methyl ether was selectively oxidized by treatment with cerium ammonium nitrate in aqueous acetonitrile at ambient temperature to provide the 10-(S)-hydroxy adduct. The stereochemistry of the oxidation product was proven by single crystal X-ray structure determination. The Dess-Martin periodinane further oxidized the 10-hydroxy to the 10-keto analog. Deprotection formed 10-ketonaloxone as an analytical reference standard.     

The phenylation of 3βpicoline. Isolation and establishment of the structure of β-pyridyl-α-dehydropiperidine

It was established that the side product that is formed in substantial amounts in the phenylation of -picoline by phenyllithium is 3-methyl-2-phenyl-5-(3-methyl-2-phenyl-3,4-dehydropiperidyl-6)pyridine — a structural analog of anabasine. Its structure was demonstrated by spectral methods and by chemical conversions.Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 8, pp. 115–119, August, 1984.