Steric course of some cyclopropanation reactions of L-threo-hex-4-enopyranosides

Completely protected 4-deoxy-α-L-threo-hex-4-enopyranosides 1c,d undergo the dichlorocarbene addition affording exclusively diastereomeric adducts 5c,d with the cyclopropane ring anti to the C-3 alkyloxy substituent, while the reaction with 3-unprotected derivatives 1a,b affords a mixture of syn and anti derivatives. Under the Simmons-Smith cyclopropanation adducts 2a-d with a syn stereochemistry are obtained. Starting from 5b, the cyclopropanated sugar 3b is obtained by reduction with LiAlH₄, thus the two diastereomers 2b and 3b can be stereoselectively obtained through the two different pathways. For a useful comparison, 4-deoxy-β-L-threo-hex-4-enopyranoside 1e was also subjected to the above two cyclopropanation methods affording the expected cycloadduct 2e and a diastereomeric mixture of dichlorocycloadducts 4e and 5e (4e/5e=2.8:1).     

Polymer-supported calix[4]arenes for sensing and conversion of NO2/N2O4

The use of simple calix[4]arenes 1a,b for NO₂/N₂O₄ sensing and conversion is demonstrated, both in solution and in the solid state. Upon reacting with these gases, compounds 1a,b encapsulate reactive NO⁺ cations within their cavities with the formation of deeply colored (λ_max∼570 nm) charge-transfer complexes 2a,b. Further functionalization of the calix[4]arene platform is reported for attachment to solid supports. Polymer-supported calixarene material 3 was prepared, which reversibly traps NO₂/N₂O₄ with the formation of nitrosonium storing polymer 4. Material 4 was effectively used for nitrosation of amides.     

Marked difference in singlet-chemiexcitation efficiency between syn-anti isomers of spiro[1,2-dioxetane-3,1′-dihydroisobenzofuran] for intramolecular charge-transfer-induced decomposition

Spiro[1,2-dioxetane-3,1′-dihydroisobenzofuran] syn-3 bearing a hydroxy group at the 6-position (as a model syn-rotamer of parent dioxetane 4 bearing a 3-hydroxyphenyl group) and its isomer anti-3 (as a model anti-rotamer of 4) were synthesized. When these spiro-dioxetanes were treated with tetrabutylammonium fluoride (TBAF) in DMSO, anti-3 emitted light with high efficiency (Φ^CL = 0.41), while the respective value for syn-3 was only 1/10 for anti-3. This significant difference in Φ^CL between syn-3 and anti-3 was attributed to the difference in their singlet-chemiexcitation efficiencies.     

Total synthesis of phytoprostane F1 and its 16 epimer

The first synthesis of the two enantiomers of phytoprostane F₁ methyl ester 1 and 2 is described using the syn-anti-syn alcoxy ester 3 as starting material.     

Stereospecific mono- and difluorination of the C7-bridge of norbornenes

Fluorinated norbornenes are very desirable monomers in the semiconductor and high-temperature polyimide industries. We describe herein a synthetic strategy for the stereospecific mono- or difluorination of the C₇-carbon in norbornene systems beginning with 7-ketonadic anhydride 1. In particular, anti-7-fluoro methyl diester 4 and its 7,7-difluoronadic analog 7 can be prepared from 1 in 3 or 4 steps: saponification, reduction (for 4), esterification, fluorination with DAST. In addition, anti-7-fluoro-syn-7-fluoromethylnadic diester 16 is obtained from epoxide 14, and dimethyl 7,7-difluorobicyclo[2.2.2]oct-5-ene-2,3-dicarboxylate (17) from ketone 15. Anchimeric assistance of the norbornene double bond guides the introduction of attacking fluoride anions stereospecifically anti to the olefinic linkage.     

Stereoselective titanium-mediated syn-aldol reaction from a lactate-derived chiral ethyl ketone

Stereoselectivity of the titanium-mediated aldol process based on (S)-2-benzyloxy-3-pentanone, 1, is dramatically modified by the presence of a Lewis acid. Among the Lewis acids surveyed, TiCl₄ has given access to the corresponding 2,4-anti-4,5-syn aldol adducts with the highest diastereomeric ratios. The excellent stereocontrol exerted by the aforementioned ketone has been demonstrated in double asymmetric reactions involving chiral α-methyl-β-OTBDPS aldehydes.     

Fe Spin crossover materials based on dissymmetrical N4 Schiff bases including 2-pyridyl and 2R-imidazol-4-yl rings: Synthesis,crystal structure and magnetic and Mössbauer properties

The synthesis and characterization of new symmetrical Fe^II complexes, [FeL^A(NCS)₂] (1), and [FeL^Bx(NCS)₂] (2–4), are reported (L^A is the tetradentate Schiff base N,N′-bis(1-pyridin-2-ylethylidene)-2,2-dimethylpropane-1,3-diamine, and L^Bx stands for the family of tetradentate Schiff bases N,N′-bis[(2-R-1H-imidazol-4-yl)methylene]-2,2-dimethylpropane-1,3-diamine, with: R = H for L^B1 in 2, R = Me for L^B2 in 3, and R = Ph for L^B3 in 4). Single-crystal X-ray structures have been determined for 1 (low-spin state at 293 K), 2 (high-spin (HS) state at 200 K), and 3 (HS state at 180 K). These complexes remain in the same spin-state over the whole temperature range [80–400 K]. The dissymmetrical tetradentate Schiff base ligands L^Cx, N-[(2-R₂-1H-imidazol-4-yl)methylene]-N′-(1-pyridin-2-ylethylidene)-2,2-R₁-propane-1,3-diamine (R₁ = H, Me; R₂ = H, Me, Ph), containing both pyridine and imidazole rings were obtained as their [FeL^Cx(NCS)₂] complexes, 5–10, through reaction of the isolated aminal type ligands 2-methyl-2-pyridin-2-ylhexahydropyrimidine (R₁ = H, 5–7) or 2,5,5-trimethyl-2-pyridin-2-ylhexahydropyrimidine (R₁ = Me, 8–10) with imidazole-4-carboxaldehyde (R₂ = H: 5, 8), 2-methylimidazole-4-carboxaldehyde (R₂ = Me: 6, 9), and 2-phenyl-imidazole-4-carboxaldehyde (R₂ = Ph: 7, 10) in the presence of iron(II) thiocyanate. Together with the single-crystal X-ray structures of 7 and 9, variable-temperature magnetic susceptibility and Mössbauer studies of 5–10 showed that it is possible to tune the spin crossover properties in the [FeL^Cx(NCS)₂] series by changing the 2-imidazole and/or C2-propylene susbtituent of L^Cx.     

Aspects of stereocontrol in the L-Selectride reduction of 4-acyl-1,3-dioxolane derivatives

The application of L-Selectride, either alone or in combination with ZnCl₂, to aryl ketones 1, 8 and 11 resulted in highly anti-stereoselective reduction. In contrast, lactols 22 and 23 gave a moderate syn-preference using L-Selectride alone and a high syn-preference in the presence of ZnCl₂. Uniquely, high anti- stereoselectivity was observed in the reduction of o-anisyl lactol 37 with L-Selectride alone, which was switched to a high syn-preference when ZnCl₂ was present.     

Bu3SnH-mediated 5-exo selective radical cyclization of N-vinyl-α,β-unsaturated amides leading to γ-lactams

Treatment of N-vinyl-α,β-unsaturated amides 1a-h with Bu₃SnH and a catalytic amount of AIBN in boiling benzene caused 5-exo cyclization of allylic O-stannyl ketyl radicals generated by addition of Bu₃Sn· on the amide-oxygen atoms to provide γ-lactams 2a-h after acidic workup. When enamide 1d was treated with Bu₃SnH in the presence of AIBN followed by aldehydes 3a-d, sequential radical cyclization and aldol reactions occurred to afford anti-adducts 4a-d and syn-adducts 5a,b.     

CpCo(dithiolene) complexes of highly flexible oxddt ligand with two different Z-shaped and U-shaped structures

[CpCo(oxddt)] complex (2, oxddt = o-xylenediyldithioethylene-1,2-dithiolate, Cp = η⁵-cyclopentadienyl) was obtained from o-xylenediyldithioethylene-1,3-dithiol-2-one (OC(oxddt)) (1). 2 further reacted with diazoalkanes (N₂CHR) to form some alkylidene-bridged adducts [CpCo(CHR)(oxddt)] (R = H (3a), SiMe₃ (3b)). Adduct 3a further reacted with protic acids (HX) to give some S-methylated adducts [CpCo(X)(oxddt)(S-Me)] (X = Cl (4a), OCOCF₃ (4c)), followed by the Co-C bond cleavage in the three-membered cobaltathiirane ring. Two different Z-shaped and U-shaped molecular structures were observed by X-ray diffraction studies. In the former structure (Z), the dithiolene and o-xylylene planes are located at almost parallel position each other, and in the latter structure (U), both planes are not parallel but the o-xylylene moiety is located closer to the dithiolene plane than the Z-shaped one. The Z-shaped structure involves 1 and 2. The U-shaped structure involves 3a, 3b, 4a and 4c. Complex 1 showed a one-dimensional chain through intermolecular π-π interaction in the crystal. Complex 2 had a dimeric interaction between dithioethylenedithiolate moieties (S₂C₂S₂) in the oxddt. The SiMe₃ group in 3b was placed at an exo-position with respect to the cobaltadithiolene ring due to a steric hindrance from the U-shaped oxddt ligand. In 4a, the X and Me groups are located at the opposite side of the dithiolene plane (anti-form) but in 4c, both groups are presented at the same side of the dithiolene plane (syn-form). The NMR analysis of 4a in solution indicated existence of both anti- and syn-isomers (7:1).     

Mononuclear and binuclear iron(III) complexes incorporating N4O3 coordinating heptadentate ligand: Synthesis,structure and magnetic properties

The N₄O₃ coordinating heptadentate ligand afforded the mononuclear [Fe^III(HL)][BPh₄] (1) and binuclear [Fe₂^IIIL(OAc)₂][BPh₄] (2) complexes. In complex 1, the ligand binds in a trianionic N₂O₃ fashion whereas in the case of 2 the ligand binds in the trianionic N₄O₃ form in which the iron ions are held together by μ-phenoxo and bis μ-acetato bridges. In 1, the Fe(III) center has a trigonal bipyramidal geometry (τ = 0.84) whereas in 2 both the Fe(III) centers have a distorted octahedral geometry. Complex 2 shows an intramolecular weak antiferromagnetic interaction. Gas phase geometry optimizations have been performed using density functional theory without any symmetry constraints. The gas phase optimized structures agree well with the X-ray structure.     

Synthesis and conformational analysis of 3-hydroxypipecolic acid analogs via CSI-mediated stereoselective amination

A short and efficient stereoselective synthetic approach toward substituted piperidines, involving (2S,3S)-3-hydroxypipecolic acid 1, (2R,3S)-3-hydroxypipecolic acid 3, and their acid-reduced analogs 2 and 4, has been developed. The requisite anti- and syn-1,2-amino alcohols 11 and 12 for the preparation of title four piperidine analogs 1-4 were synthesized via the regioselective and diastereoselective amination of anti- and syn-1,2-dibenzyl ethers 13 and 14 using chlorosulfonyl isocyanate (CSI). As a result, reaction of anti-1,2-dibenzyl ether 13 with CSI afforded exclusively the anti-1,2-amino alcohol 11 with the diastereoselectivity of 49:1 in toluene at −78 °C and syn-isomer 14 gave the syn-1,2-amino alcohol 12 as the major product with the diastereoselectivity of 12:1 in hexane at −78 °C. The result of these reactions could be explained by the neighboring group effect leading to retention of stereochemistry. In addition, conformational changes of trans-piperidine intermediate 9 in terms of the nature of N-protecting groups are described. The conformations of 9 and 24-28 were confirmed by ¹H NMR analysis and NOE correlation. Furthermore, the conformations of piperidines 18 and 23 with hydroxyl methyl substituent at C-2 were investigated by NMR spectroscopy.     

Two novel Cu4O4 cubanes with functionalized chelating aziridine ligands

The synthesis and molecular structure of [Tetrakis{μ₃-(2-aziridin-1-yl-ethanolato-κ²N,O)-bromidocopper(II)] (5) and [Tetrakis{(N-(2-amino-2-methylpropyl)-2,2-dimethylaziridine-κ²N,N′)-(μ₃-hydroxido)-copper(II)}]tetrabromide (7) is reported. Both chelate complexes are prepared from the corresponding bidentate aziridine ligands 2-(1-aziridinyl)ethanol (3) and N-(2-amino-2-methylpropyl)-2,2-dimethylaziridine (4), respectively and CuBr₂ (1) or CuBr (2, by redox reaction), in dry dichloromethane. Both compounds crystallize in a distorted Cu₄O₄-cubane structure. In the neutral complex 5, the cube is formed by four μ₃-bridging oxygen atoms of the bidentate 2-aziridin-1-yl-ethanolato ligand formed by deprotonation of 3 and four square-pyramidal Cu(II) centers. In the cationic complex 7, the Cu₄O₄ core consists of four μ₃-hydroxido bridges situated at alternate vertexes to four also 5-coordinate Cu(II) centers. Both compounds are fully characterized by IR-spectroscopy, elemental analysis and X-ray structure analysis and describe the first examples of cubanes with aziridine ligands.     

Reactions of P4S10 and pyPS2Cl with N,N′-diphenylurea and N,N′-diphenylthiourea

The reaction of P₄S₁₀ (1) with N,N′-diphenylurea (PhNH)₂CO (2) results in new heterocyclic compounds: the pyridinium salt of 1,3-diphenyl-2-sulfido-2-thioxo-1,3-diaza-2λ⁵-phosphetidine (3) (with a P–N–C–N cycle) and the pyridinium salt of 1,4-diphenyl-2,5-disulfido-2,5-dithioxo-1,4-dithiadiaza-2λ⁵,5λ⁵-diphosphinane (4), containing the (P–S–N)₂ cycle and the cyclic thiophosphates [pyH]₂[P₂S₈] (5), [pyH]₂[P₂S₇] (6) and [pyH]₃[P₃S₉] (7). A similar reaction, but carried out with N,N′-diphenylthiourea (PhNH)₂CS (8), leads to the formation of 4 and 6. pyPS₂Cl (9), used as an alternative starting material, also yields compounds 3, 4, 5, and further [pyH][PS₂Cl₂] (10) and S₈ after reaction with 2. Compound 3 reacts with Pd(CH₃COO)₂, with the formation of the complex [Pd(Ph₂N₂COPS₂)₂] (11). The crystal structures of 3 and 7 were determined by single-crystal X-ray diffraction.     

Copper(II) complexes of N4 tetradentate ligands with flexible alkyl spacers: Crystal structure,DNA binding and cleavage studies

Mononuclear copper(II) complexes, [Cu L1] (ClO₄)₂ (1), [Cu L2] (ClO₄)₂ (2) and [Cu L3] (ClO₄)₂ (3) with quadridentate Schiff base ligands L1 (N,N′-bis-pyridin-2-ylmethyl-butane-1,4-diimine), L2 (N,N′-bis-pyridin-2-ylmethyl-pentane-1,5-diimine) and L3 (N,N′-bis-pyridin-2-ylmethyl-hexane-1,6-diimine) have been synthesized and characterized. The crystal structure data of 1 reveals the existence of the complex in two different geometries, namely a square pyramid and a distorted octahedron, which eventually leads to the packing of the molecule into helical and anti-parallel structures respectively. Absorption titration studies with calf thymus DNA for all three complexes are suggestive of groove binding with binding constant values for 1, 2 and 3 being 2.6 ± 0.2 × 10⁴ M⁻¹, 11.5 ± 0.2 × 10⁴ M⁻¹ and 1.83 ± 0.2 × 10⁴ M⁻¹ respectively. Control cleavage experiments using pBR 322 plasmid DNA and distamycin suggest minor groove binding for these complexes. In the presence of ascorbic acid, the complexes show efficient DNA cleavage, the order of efficiency being 1 > 2 ≅ 3.     

Synthesis and characterization of metal-free and metallophthalocyanines containing N2S2-type macrocyclic moieties linked ferrocenyl groups

The new metal-free (4) and metallophthalocyanines (5) carrying macrocyclic moieties linked ferrocenyl groups have been synthesized by direct cyclotetramerization of the pre-cursor, 12,13-dicyano-4,7-bis(ferrocenylmethyl)-2,3,4,5,6,7,8,9-octahydrocyclobenzo[k]-4,7-diaza-1,10-dithiacyclododecine (3) which has been prepared by the macrocyclization reaction of 1,2-bis(2-iodoethylmercapto)-4,5-dicyanobenzene (1) with N,N′-ethylenebis-(ferroceneylmethyl)amine (2), in the presence of 1,8-diazabicyclo[5.4.0]undec-7-ene (DBU) as a strong organic base. Nickel (II) phthalocyanine (5) was synthesized by the reaction of metal-free phthalocyanine with anhydrous NiCl₂ in dry quinoline. The target compound and its intermediates have been characterized by a combination of elemental analysis and ¹H, ¹³C NMR, IR, UV-Vis and MS spectral data.     

Reactivity of 2,3-bis(2-pyridyl)pyrazine with [Re2(CO)8(CH3CN)2]: Molecular structures of [Re2(CO)8(C14H10N4)] and [Re2(CO)8(C14H10N4)Re2(CO)8]

The reaction of the labile compound [Re₂(CO)₈(CH₃CN)₂] with 2,3-bis(2-pyridyl)pyrazine in dichloromethane solution at reflux temperature afforded the structural dirhenium isomers [Re₂(CO)₈(C₁₄H₁₀N₄)] (1 and 2), and the complex [Re₂(CO)₈(C₁₄H₁₀N₄)Re₂(CO)₈] (3). In 1, the ligand is σ,σ′-N,N′-coordinated to a Re(CO)₃ fragment through pyridine and pyrazine to form a five-membered chelate ring. A seven-membered ring is obtained for isomer 2 by N-coordination of the 2-pyridyl groups while the pyrazine ring remains uncoordinated. For 2, isomers 2a and 2b are found in a dynamic equilibrium ratio [2a]/[2b]  =  7 in solution, detected by ¹H NMR (−50 °C, CD₃COCD₃), coalescence being observed above room temperature. The ligand in 3 behaves as an 8e-donor bridge bonding two Re(CO)₃ fragments through two (σ,σ′-N,N′) interactions. When the reaction was carried out in refluxing tetrahydrofuran, complex [Re₂(CO)₆(C₁₄H₁₀N₄)₂] (4) was obtained in addition to compounds 1-3. The dinuclear rhenium derivative 4 contains two units of the organic ligand σ,σ′-N,N′-coordinated in a chelate form to each rhenium core. The X-ray crystal structures for 1 and 3 are reported.     

Steric and electronic effects in stabilizing allyl-palladium complexes of “P-N-P” ligands, X2PN(Me)PX2 (X = OC6H5 or OC6H3Me2-2,6)

The chemistry of η³-allyl palladium complexes of the diphosphazane ligands, X₂PN(Me)PX₂ [X = OC₆H₅ (1) or OC₆H₃Me₂-2,6 (2)] has been investigated.The reactions of the phenoxy derivative, (PhO)₂PN(Me)P(OPh)₂ with [Pd(η³-1,3-R′,R″-C₃H₃)(μ-Cl)]₂ (R′ = R″ = H or Me; R′ = H, R″ = Me) give exclusively the palladium dimer, [Pd₂{μ-(PhO)₂PN(Me)P(OPh)₂}₂Cl₂] (3); however, the analogous reaction with [Pd(η³-1,3-R′,R″-C₃H₃)(μ-Cl)]₂ (R′ = R″ = Ph) gives the palladium dimer and the allyl palladium complex [Pd(η³-1,3-R′,R″-C₃H₃)(1)](PF₆) (R′ = R″ = Ph) (4). On the other hand, the 2,6-dimethylphenoxy substituted derivative 2 reacts with (allyl) palladium chloro dimers to give stable allyl palladium complexes, [Pd(η³-1,3-R′,R″-C₃H₃)(2)](PF₆) [R′ = R″ = H (5), Me (7) or Ph (8); R′ = H, R″ = Me (6)].Detailed NMR studies reveal that the complexes 6 and 7 exist as a mixture of isomers in solution; the relatively less favourable isomer, anti-[Pd(η³-1-Me-C₃H₄)(2)](PF₆) (6b) and syn/anti-[Pd(η³-1,3-Me₂-C₃H₃)(2)](PF₆) (7b) are present to the extent of 25% and 40%, respectively. This result can be explained on the basis of the steric congestion around the donor phosphorus atoms in 2. The structures of four complexes (4, 5, 7a and 8) have been determined by X-ray crystallography; only one isomer is observed in the solid state in each case.     

Crystal structure and spectral characterization of hexanuclear oxo titanium(IV) clusters: [Ti6O6(OSi(CH3)3)6(OOCR)6] (R = Bu,CH2Bu,C(CH3)2Et)

Hexanuclear oxo titanium(IV) siloxo carboxylate complexes with the general formula [Ti₆O₆(OSi(CH₃)₃)₆(OOCR)₆] (R = Bu^t (1), CH₂Bu^t (2), C(CH₃)₂Et (3)) were synthesized in quantitative yield, by the reaction of Ti(OSiMe₃)₄ with the appropriate organic acid. Crystal structure determination revealed that molecules of 1–3 are composed of [Ti₆-(μ₃-O)₆] cores stabilized by six syn–syn carboxylato bridges and six terminal siloxide ligands. Each metal atom is surrounded by six oxo atoms, capping the triangular faces of the distorted octahedron. Spectral characterization (IR, NMR) of 1–3 revealed a significant non-equivalence of the carboxylate group interactions, resulting from the asymmetry of the Ti-μ-OOC bonds of the syn–syn bridges. The thermal stability of the studied compounds was determined from TGA/DTA analysis.     

Complexes of titanium and zirconium based on [C5Me4CH2-(2-C5H4N)] ligand

Half-sandwich [η⁵:η¹-κN-C₅Me₄CH₂-(2-C₅H₄N)]MCl₃ (M = Ti (4), Zr (5)) and sandwich [η⁵-C₅Me₄CH₂-(2-C₅H₄N)][η⁵-C₅Me₅]ZrCl₂ (6) ring-peralkylated complexes have been prepared and characterized. Evidence of the intramolecular coordination of the side-chain pyridyl group both in 4 and 5 in solutions is provided by NMR spectroscopy data. Crystal structure of an adduct 5-py with one molecule of pyridine has been established by X-ray diffraction analysis.