Thermodynamic properties of resveratrol in dimethyl sulfoxide

In this article, the enthalpies of dissolution of resveratrol in dimethyl sulfoxide (DMSO) were measured using a RD496-2000 Calvet microcalorimeter at 298.15?K under atmospheric pressure. The differential enthalpy (??_dif H _m) and molar enthalpy (??_sol H _m) of dissolution of resveratrol in DMSO were determined, and the relationship between heat and the amount of solute was also established. Based on the thermodynamic and kinetic knowledge, the corresponding kinetic equation, half-life, ??_sol H _m, ??_sol S _m, ??_sol G _m, the relative partial molar enthalpy (??_sol H _m(partial)) and the relative apparent molar enthalpy (??_sol H _m(app)) of the dissolution process were obtained. The results showed that this study not only provided a simple method for the determination of the half-life for a drug, but also offered a theoretical reference for the clinical application of resveratrol.     

Supramolecular architecture of the 1:1 complex of phloroglucinol with dimethyl sulfoxide

The phase diagram of the phloroglucinol (1,3,5-trioxybenzol)-dimethyl sulfoxide system is studied. The system is found to form a 1:1 molecular complex of phloroglucinol with dimethyl sulfoxide. The crystal structure of the complex is determined. The crystallographic data for C₈H₁₂O₄S, M = 204.24, monoclinic system, P2₁/n space group, unit cell parameters: a = 9.0345(2)Å, b = 9.6895(3)Å, c = 10.9960(3)Å, β = 98.865(1)°, V = 951.09(4) ų, Z = 4, d _x = 1.426 g/cm³, R1 = 0.0283, T = 150 K. The molecules are joined in a supramolecular ensemble via O-H...O hydrogen bonds.     

Structure and conformational processes of bis(o-cumyl)sulfide, sulfoxide and sulfone

The NMR solution spectra of the title sulfide and sulfone show decoalescence of the geminal methyl signals of the isopropyl groups at low temperature (−178 °C for the ¹³C signal of sulfide at 150.8 MHz and −147 °C for the ¹H signal of sulfone at 600 MHz). The barriers for the related dynamic processes were measured (4.3 and 7.0 kcal mol⁻¹ for the sulfide and sulfone, respectively). The preferred conformer of sulfide has a propeller shape with a C₁ symmetry, as suggested by Molecular Mechanics (MM) calculations. In the case of sulfone the preferred conformer has a propeller shape with a C₂-anti symmetry, as indicated by calculations and supported by X-ray crystallographic determination. The computed contour map of the potential energy shows that in both cases the dynamic processes take place via correlated rotations (cogwheel mechanism) of the two aromatic substituents about the Ar-S bonds. Dynamic processes could not be observed by NMR in the title sulfoxide, which was also found to adopt a propeller shaped conformation, as indicated by MM calculations and X-ray diffraction.     

Excess enthalpies of alkane-1-amines {CnH2n+1NH2, n = 3-8} + methyl methylthiomethyl sulfoxide and +dimethyl sulfoxide at 298.15 K

Excess enthalpies of binary mixtures between each of alkane-1-amines {C_nH_2n+1NH₂, n=3-8} and methyl methylthiomethyl sulfoxide (MMTSO) or dimethyl sulfoxide (DMSO) have been determined at 298.15 K. All mixtures showed positive enthalpy changes over the whole range of mole fractions.The limiting excess partial molar enthalpies of the aliphatic amines, H₁^E,∞, of all the mixtures with MMTSO or DMSO studied were smaller than those of MMTSO or DMSO, H₂^E,∞, respectively. Linear relations are obtained between limiting excess partial molar enthalpies and number of methylene groups.     

Synthesis of molecular chains: phenylene thioether and sulfoxide oligomers

The application of a general synthetic approach to prepare molecular chains is reported. It is based on a step-by-step method each consisting first in a Pd-catalyzed reaction between ArI and HXAr′Br (Ar=aryl, Ar′=arylene) to give ArXAr′Br followed by a Cu-catalyzed replacement of Br by I to give ArXAr′I that can be reacted with HXAr′Br in the following step. The application of this method is here illustrated to prepare phenylene sulfide oligomers (X=S). Starting from RC₆H₄I-4 (R=H, MeO, NO₂, NH₂) and HSC₆H₄Br-x (x=2, 4) it is possible to grow chains in one direction to give X(C₆H₄S-m)_nC₆H₄R-4 (n=1, X=Br, m=4, R=H, MeO, NO₂, NH₂, SMe and m=2, R=H, MeO, NO₂; n=1, X=I, m=2 or 4, R=H, MeO, NO₂; n=2, X=Br, m=2 or 4, R=H, MeO, NO₂; n=2, X=I, m=4, R=MeO, NO₂; n=3, X=Br, m=4, R=MeO, NO₂; n=3, X=I, m=4, R=NO₂ and n=4, X=Br or I, m=4, R=NO₂). From HSC₆H₄Br-x and IC₆H₄I-4 the chains can grow in two directions to give X(C₆H₄S-4)_nC₆H₄X-4 (n=2 or 4, X=Br or I), 2-XC₆H₄(SC₆H₄-4)_nSC₆H₄X-2 (n=3 or 5, X=Br). Using diiodomesitylene the dithioethers C₆HMe₃-2,4,6-(SC₆H₄X-4)₂-1,3 (X=Br, I) have been prepared. The series of sulfoxides X(C₆H₄S(O)-4)_nC₆H₄R-4 (X=Br, n=1, R=MeO, n=3, R=NO₂, n=4, R=Br; X=R=I, n=2) has been obtained from the corresponding thioethers and PhICl₂.     

Classical versus redox tautomerism: substituent effects on the keto/enol and sulfoxide/sulfenic acid equilibria

MP2/6-311+G** ab initio calculations have been carried out for a classical example of tautomerism, the keto/enol [RCOCH₃/RC(OH)CH₂] and an example of redox tautomerism, the sulfoxide/sulfenic acid [RS(O)H/RSOH]. Eleven R substituents have been examined. Both equilibria show proportional energies and similar dependence on the Swain-Lupton Fand Rparameters.     

Nicotinamide solvation state in aqueous dimethyl sulfoxide

The solvation state of biologically active compound vitamin B₃, viz., 3-pyridinecarboxamide, in an aqueous-dimethyl sulfoxide solvent of a variable composition was studied by ¹H and ¹³C NMR and IR spectroscopy. Below X _DMSO ?0.65 molar fraction, the solvation of the N heteroatom due to hydrogen bonds with water molecules weakens. At X _DMSO > 0.65 molar fraction, almost no changes are observed in the solvate state of the N heteroatom. The ¹H NMR spectra indicate that the degree of conjugation of the carbamide group with the heterocycle increases with an increase in the DMSO concentration. The structures of the dimethyl sulfoxide and mixed aqueous-dimethyl sulfoxide solvates of nicotinamide were optimized by the B3LYP/6311++(DP) method, and their ¹³C chemical shifts (GIAO) and IR spectra were obtained. According to the IR spectroscopic data, the number of hydrogen bonds involving the carbamide group decreases on going from H₂O to DMSO.     

Biocatalytic and chemical preparation of all four diastereomers of methionine sulfoxide

Biocatalytic or chemical oxidations can be used in a complementary manner for the preparation of all four diastereomers of methionine sulfoxide with high diastereomeric purity in overall isolated yields of 20–55% from methionine. The N-phthaloyl derivatives of L- and D-methionine were selectively oxidised to the (S_SS_C) and (S_SR_C) sulfoxides respectively by biotransformation using the fungus Beauveria bassiana ATCC 7159. Hydrogen peroxide oxidation of the same materials gave mixtures from which the (S_SS_C) and (R_SR_C) isomers can be readily isolated by crystallisation. Chromatography of the residual material then afforded the (R_SS_C) and (S_SR_C) isomers.     

Thallium-205 NMR spectroscopy. Solvation of the Tl(l) ion in the binary solvent systems water/pyridine,water/dimethyl sulfoxide,and pyridine/dimethyl sulfoxide

Solvation of the Tl⁺ ion in 0.005M solutions of water/pyridine, water/dimethyl sulfoxide, and pyridine/dimethyl sulfoxide was studied with ²⁰⁵ Tl NMR spectroscopy as a function of solvent composition and anion (NO ₃ ^– and ClO ₄ ^t- ). Dimethyl sulfoxide solvated the Tl⁺ ion more strongly than did pyridine, despite the latter's greater electron-donating ability. This was explained in terms of structural effects, which were found to be large for all three binary solvent systems. Ion pairing was evident in the DMSO/pyridine and water/pyridine solvent systems in which the pyridine mole fraction was greater than 0.8.     

Spectral study of the reactions of dimethyl sulfoxide with the nitrite complexes of Co-porphyrins

It is revealed by FTIR and electron absorption spectroscopy that the reactions of dimethyl sulfoxide with the nitro complexes of Co-porphyrins both in the solid phase and an inert solvent afford six-coordinate complexes with the general formula (DMSO)Со(Por)(NO₂) (Por is meso-tetraphenyl- and meso-tetra-p-tolylporphyrinato dianions). These compounds are stable in the solid state, whereas they partially decompose in an inert solvent to form five- and six-coordinate complexes. The ambident nitrite and dimethyl sulfoxide ligands are coordinated to the metal atom through the N and O atoms, respectively, which was confirmed by the application of isotope-containing compounds ¹⁵NO₂ and DMSO-d₆.     

Electrochemical reduction of uracil in dimethyl sulfoxide: Autoprotonation of the anion radical

The electrochemical reduction of uracil in dimethyl sulfoxide was investigated, using d.c.and a.c. polarography, cyclic voltammetry, and controlled potential electrolysis. Uracil is reduced in a one-electron step (E_1/2=?2.3 V); the apparent number of electrons transferred (n) decreases from one at infinite dilution to one-half at concentrations above 1mM. The concentration dependent n-value is due to proton transfer by the parent compound to the radical anion formed on reduction. Such a proton transfer, which has been observed for 2-hydroxypyrimidine, deactivates part of the uracil, which would otherwise be available for reduction, by formation of the more difficultly reducible conjugate base. The uracil anion forms insoluble mercury salts, producing two oxidation waves (E_1/2 of ?0.1 and ?0.3 V); the latter wave is due to formation of a passivating film on the electrode. Digital simulations indicate that the protonation rate exceeds 10⁵M^?1 s^?1 and that, at low uracil concentration, some of the free radical formed on protonation is further reduced. At concentrations exceeding 1 mM, all of the free radical dimerizes. The effect of added acids and base on the electrochemical behavior is described.     

Electron-doping through La-for-Sr substitution in (Sr1−xLax)2FeTaO6: Effects on the valences and ordering of the B-site cations, Fe and Ta

We have employed aliovalent A-site cation substitution, La^III-for-Sr^II, to dope the Sr(Fe_0.5Ta_0.5)O₃ perovskite oxide with electrons. Essentially single-phase samples of (Sr_1−xLa_x)(Fe_0.5Ta_0.5)O₃ were successfully synthesized up to x≈0.3 in a vacuum furnace at 1400 °C. The samples were found to crystallize (rather than with orthorhombic symmetry) in monoclinic space group P2₁/n that accounts for the partial ordering of the B-site cations, Fe and Ta. With increasing La-substitution level, x, the degree of Fe/Ta order was found to increase such that the La-richest compositions are best described by the B-site ordered double-perovskite formula, (Sr,La)₂FeTaO₆. From Fe L₃ and Ta L₃ XANES spectra it was revealed that upon electron doping the two B-site cations, Fe^III and Ta^V, are both prone to reduction. Magnetic susceptibility measurements showed spin-glass type behaviour for all the samples with a transition temperature slightly increasing with increasing x.     

Water-containing derivative phases of the Srn+1FenO3n+1 series

The n=1, 2, 3 and ∞ members of the homologous series Sr_n+1Fe_nO_3n+1 of layered iron oxides are investigated for their tendency to accept additional layers of water in their crystals. The phases possess a Ruddlesden-Popper-type SrO-(SrO-FeO₂)_n crystal structure, where the n=∞ limit is nothing but the perovskite structure. It is revealed that the n=1, 2 and 3 phases readily accommodate one or two layers of water between adjacent SrO layers, whereas the n=∞ member which lacks the SrO-SrO double-layer unit remains intact in the presence of water. The speed of the water intercalation process is found to decrease with increasing n. Among the layered water derivatives, the n=2 phase with two water molecules per formula unit, i.e. Sr₃Fe₂O₇·2H₂O, was found to be most stable.     

Investigation of electrochemical behavior of secondary products of capture of OH radicals by dimethyl sulfoxide molecules using laser photoemission

Electrode reactions of intermediates formed during capture of OH radicals by dimethyl sulfoxide (DMSO) molecules were studied using laser photoemission in aqueous buffer solutions in the pH range from acidic to basic. The results were compared with characteristics of one-electron reduction of methyl radicals generated via photoemission from methyl halides CH₃X (X = Cl, I). From these experiments, it was concluded that intermediates in these systems were identical since the primary product of capture of OH radicals by DMSO molecules, i.e., adduct (CH₃)₂SO^. (OH), was spontaneously decomposed to form ^.CH₃ with a time as low as <2 × 10^?5 s. Some anomalies were found on time-resolved voltammograms of intermediates in the pH range from weakly basic to weakly acidic and at illumination times of an electrode with UV light T _m ≤ 90–300 ms. These features were presumably caused by rather slow formation of organomercury intermediates as interaction products of the components of the system DMSO—OH radical—mercury electrode.     

Determination of absolute configuration using vibrational circular dichroism spectroscopy: the chiral sulfoxide 1-thiochroman S-oxide

We have determined the absolute configuration of the chiral sulfoxide 1-thiochroman S-oxide 1 using vibrational circular dichroism (VCD) spectroscopy. The VCD spectrum of a CCl₄ solution of 1 was analyzed using density functional theory (DFT), which predicts three stable conformations of 1, separated by <1 kcal/mol. The VCD spectrum predicted using the DFT/GIAO methodology for the equilibrium mixture of the three conformations of (S)-1 is in excellent agreement with the experimental spectrum of (+)-1. The absolute configuration of 1 is therefore (R)-(−)/(S)-(+). (+)-1 and (−)-1 of high enantiomeric excess (e.e.) were synthesized in high yields via asymmetric oxidation of 1-thiochroman 2 using Ti(iso-PrO)₄/(R,R)-1,2-diphenylethane-1,2-diol/H₂O/tert-butyl hydroperoxide and Ti(iso-PrO)₄/l-diethyl tartrate/H₂O/cumene hydroperoxide, respectively.     

Radiothermoluminescence of tetiamethylene sulfoxide

Radiothermoluminescence (RTL) and ESR spectra of tetramethylene sulfoxide (TMSO) irradiated by X-ray and⁶⁰Co γ-ray radiation have been studied at 77 K. The temperatures of RTL maxima were correlated with the changes in color of specimens and the shape of the ESR spectral lines. The temperatures at which maxima or inflections are observed (depending on the kind of irradiation, dose, and introduced additives) were determined: 90, 115, 125, 133, 145, and 155 K. A signal of the TMSO radical cation was observed in the ESR spectrum (a singfet with g = 2.008±0.001 and δH = 12 Oc); it completely disappeared after the cessation of luminescence at the maximum at 133 K. An analogous result is achieved by illumination of the specimen with maximum effect in the yellow-green region of the spectrum. Activation of RTL by the UO₂ ²⁺ and Tb³⁺ ions was studied. Their thermal deactivation was correlated with molecular mobility manifested in RTL.     

Vapor pressure isotope effects in aqueous systems. VIII. The system dimethyl sulfoxide/H2O/D2O

Vapor pressures for the system I (dimethyl sulfoxide/H₂O=DMSO/H₂O) and isotopic differential pressures I-II (II=DMSO/D₂O) have been measured between 25 and 70°C at DMSO concentrations of 0.05, 0.15, 0.30, 0.45, 0.60, 0.70, 0.80, 0.87, and 0.92 mole fraction. A high-precision differential method was used. The total pressures over the solutions, I, have been fitted to a relation derived from the Duhem-Margules equation, P ^T =P ₁ ^o X₁γ₁+P ₂ ^o X₂γ₂, with γ₁=exp[∑_kα_kX ₂ ^k ] and $$\gamma _2 = exp[\sum \alpha _k X_2^k - \sum (\alpha _k /(k - 1))(kX_2^{k - 1} - 1)].$$ . The α_k are parameters andk is a number ≥2. The α_k were taken as temperature dependent. Four parameters sufficed to fit the data within experimental error. Excess partial molal properties derived from the fits are in quantitative agreement with earlier literature results derived from the directly measured partial pressures, but the present data extend over a wider temperature range. The isotopic differential pressures I-II were similarly fitted to the relation above. The excess free energies and enthalpiesG _I ^E andH _I ^E are large and negative. The isotope effects ΔG _I,II ^E =G _I ^E ?G _II ^E and ΔH _I,II ^E are negative. They are discussed in detail in terms of the theory of isotope effects in condensed phases and demonstrated to be consistent with that theory and with the available spectroscopic data. A small amount of enthalpy data for the solution of DMSO in HOH and DOD is reported.     

Effect of TiO2 nanostructure morphology on the performance of a photoelectrochemical cell of ITO/TiO2/electrolyte/platinum

The morphology of photovoltaic material is able to influence of the performance of photoelectrochemical cell. Polyvinylpyrrolidone (PVP), cetyltrimethylammonium bromide (CTAB), and hexamethylenetetramine (HMT) surfactant were used to modify the morphology nanostructure of TiO₂ films by a simple technique, namely, liquid phase deposition during their growth process. It was found that the untreated surfactant TiO₂ film produces the morphology with the mixture nanosphere and nanoflower. The film treated with PVP, CTAB, and HMT produce the nanostructure shape of nanoflower, nanowire, and nanorod, respectively. These TiO₂ samples were utilized as photovoltaic materials in a photoelectrochemical cell of ITO/TiO₂/electrolyte/platinum. It was found that the photovoltaic parameters such as short-circuit current density (J _sc), open-circuit voltage (V _oc) and fill factor are influenced by the morphology in terms of shape and particle size of the TiO₂ nanostructure. The cell utilizing the TiO₂ nanowire treated with PVP possesses the highest J _sc and V _oc of 0.100 mAcm^?2 and 0.44 V. The length of the TiO₂ nanowire is 6?±?2 nm, while the cell with the untreated surfactant TiO₂ sample demonstrates the lowest performance. It was also found that the J _sc and V _oc increase with the decrease in the length of the TiO₂ nanostructures. The smallest length of TiO₂ possesses the best interfacial contact at TiO₂/electrolyte containing iodide/triiodide redox couple. Thus, the redox reaction is optimized at this interface.     

Viscoelastic behavior of polyacrylonitrile/dimethyl sulfoxide concentrated solution with water

The spinnability and polydispersity of polyacrylonitrile/dimethyl sulfoxide (PAN/DMSO)/H₂O spinning solutions with conventional PAN molecular weight and comparative high PAN concentration have been investigated using a cone‐plate rheometer. It is observed from the measurements that, the viscosities of the solutions decreased with the rising of shear rate, and then stabilized to almost the same value, regardless of the PAN concentration. The chain orientation in the fiber formed under constant shear rate cannot be changed considerably even after long relaxation of more than 900s. For dynamic experiments, a steady increase of both G′ and G″ with escalating oscillation frequency was seen for all samples. Higher viscous‐elastic modulus at higher H₂O content was found, too. It is also concluded from the log G′ ? log G″ plot and the gel point that the PAN/DMSO/H₂O system with regular PAN molecular weight behaves very close to a mono‐disperse system, thus very suitable for gel spinning and for preparation of high performance PAN precursor fiber. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 47: 1437–1442, 2009     

Subsolidus Phase Equilibria in the System CaO-Al2O3-CoO and the Crystal Structure of Novel Ca3CoAl4O10

The subsolidus phase diagram, CaO-Al₂O₃-CoO, and its phase relations below 1300°C have been studied in air. The stability regions of nine subsolidus compatibility triangles were established and a new ternary phase was found. The structure of this compound, Ca₃CoAl₄O₁₀ (orthorhombic, space group Pbc2₁, a=5.1452(2) Å, b=16.7731(5) Å, c=10.7055(3) Å), was determined from X-ray diffraction data and found to be isostructural with Ca₃ZnAl₄O₁₀. This is an open framework compound with three crystallographically different channels, each with a diameter of ∼3.5 Å. The two end members of the binary CoO-CaO system are surrounded by small regions of solid solutions. Lab color parameters were measured in several compositions. No ternary phases were found when Co was substituted by other divalent cations such as Sr, Ba, Mn, Ni, Cu, Cd, Sn and Pb.