New optically active organoantimony (BINASb) and bismuth (BINABi) compounds comprising a 1,1′-binaphthyl core: synthesis and their use in transition metal-catalyzed asymmetric hydrosilylation of ketones

Racemic 2,2′-bis[diarylstibano]-1,1′-binaphthyls [(±)-BINASbs] and 2,2′-bis[di(p-tolyl)bismuthano]-1,1′-binaphthyl [(±)-BINABi], which are the antimony and bismuth congeners of BINAP, have been prepared from 2,2′-dibromo-1,1′-binaphthyl (DBBN) via 2,2′-dilithio-1,1′-binaphthyl intermediate by treatment with the appropriate metal halides [(p-Tol)₂SbBr, Ph₂SbBr and (p-Tol)₂BiCl]. The optical resolution of the (±)-BINASbs could be achieved via the separation of a mixture of the diastereomeric Pd-complexes derived from the reaction of (±)-BINASbs with di-μ-chlorobis{(S)-2-[1-(dimethylamino)-ethyl]phenyl-C¹,N}dipalladium(II). Optically active (R)-BINASb and (R)-BINABi could be also obtained from optically active (R)-DBBN by the same procedure. The enantiopure BINASbs have been shown to be effective chiral ligands for the rhodium-catalyzed asymmetric hydrosilylation of ketones.     

trans-Spanning ferrocene amidodiphosphine ligand: Synthesis, palladium complexes and catalytic use in Suzuki-Miyaura cross-coupling

Amide coupling between [2-(diphenylphosphino)phenyl]methylamine and 1′-(diphenylphosphino)ferrocene-1-carboxylic acid (Hdpf) afforded a novel diphosphine-amide, 1-{N-[(2-(diphenylphosphino)phenyl)methyl]carbamoyl}-1′-(diphenylphosphino)ferrocene (1), which was subsequently studied as a ligand for palladium(II) complexes. Depending on the metal precursor, the following complexes were isolated: [PdCl₂(1-κ²P,P′)] (2), [PdCl(Me)(1-κ²P,P′)] (3), [(μ-1){PdCl₂(PBu₃)}₂] (4) and [(μ-1){PdCl(L^NC)}₂] (L^NC = 2-[(dimethylamino-κN)methyl]phenyl-κC¹), featuring this ligand either as a trans-chelating or as a P,P′-bridging donor. The crystal structure of 2·1.25CH₂Cl₂ was established by X-ray crystallography, corroborating that 1 coordinates as a trans-spanning diphosphine without any significant distortion to the coordination sphere. Complex 2 together with a catalyst prepared in situ from 1 and palladium(II) acetate were tested in Suzuki-Miyaura reaction of aryl bromides with phenylboronic acid in dioxane.     

Effects of residual metal compounds and chain-end structure on thermal degradation of poly(3-hydroxybutyric acid)

Thermal degradation behaviours of poly(3-hydroxybutyric acid) (P(3HB); bacterial poly[(R)-3-hydroxybutyric acid] and synthetic poly[(R,S)-3-hydroxybutyric acid] samples, were examined under both isothermal and non-isothermal conditions. The inverse of number-average degree of polymerisation for all P(3HB) samples decreased linearly with degradation time during the initial stage of isothermal degradation at a temperature ranging from 170-190 °C. In addition, crotonyl unit was detected in the residual polymer samples as main ω-chain-end. These results indicate that the dominant thermal degradation reaction for P(3HB) is a random chain scission via cis-elimination reaction of P(3HB) molecules. It was found that the presence of either Ca or Mg ions enhances the depolymerisation of P(3HB) molecules, while that Zn ions hardly catalyse the reaction. As a result, a shift of thermogravimetric curves toward the lower temperature regions was observed for the P(3HB) samples containing high amounts of Ca and Mg compounds.     

Modelling of Pb-(TAPS)x-(OH)y system and refinement of stability constants in the region of lead hydrolysis and lead hydroxide precipitation

The influence of [(2-hydroxy-1,1-bis(hydroxymethyl)ethyl)amino]-1-propanesulfonic acid (TAPS) on solutions containing lead(II) was studied by direct current polarography (DCP) and glass electrode potentiometry (GEP). The readings were taken at fixed total TAPS to total lead(II) concentration ratios and various pH values, at 25.0 ± 0.1 °C and ionic strength 0.1 M KNO₃.Due to the basic pK_a of the ligand, which occurs in the pH range where large amount of lead polynuclear species are formed, and the occurrence of ligand adsorption, that disabled the use of high concentrations of TAPS on DCP experiments, GEP and DCP experimental conditions were put to the limit in order to provide the correct Pb-TAPS-OH model and reliable stability constants.The proposed final model is: PbL, PbL₂, PbL₂(OH) and PbL₂(OH)₂ with overall stability constants values, as log β, 3.27 ± 0.06, 6.5 ± 0.1, 12.7 ± 0.1 and 17.27 ± 0.06, respectively.A comparative analysis of the strength of complexation of TAPS and a structural related buffer, 2-hydroxy-3-[tris(hydroxymethyl)methylamino]-1-propanesulfonic acid (TAPSO), with lead is also discussed.     

Crystal and solution structures of di-n-butyltin(IV) complexes of 5-[(E)-2-(4-methoxyphenyl)-1-diazenyl]quinolin-8-ol and benzoic acid derivatives: En route to elegant self-assembly via modulation of the tin coordination geometry

Reactions of ⁿBu₂SnCl(L¹) (1), where L¹ = acid residue of 5-[(E)-2-(4-methoxyphenyl)-1-diazenyl]quinolin-8-ol, with various substituted benzoic acids in refluxing toluene, in the presence of triethylamine, yielded dimeric mixed ligand di-n-butyltin(IV) complexes of composition [ⁿBu₂Sn(L¹)(L^2-6)]₂ where L² = benzene carboxylate (2), L³ = 2-[(E)-2-(2-hydroxy-5-methylphenyl)-1-diazenyl]benzoate (3), L⁴ = 5-[(E)-2-(4-methylphenyl)-1-diazenyl]-2-hydroxybenzoate (4), L⁵ = 2-{(E)-4-hydroxy-3-[(E)-4-chlorophenyliminomethyl]-phenyldiazenyl}benzoate (5) and L⁶ = 2-[(E)-(3-formyl-4-hydroxyphenyl)-diazenyl]benzoate (6). All complexes (1-6) have been characterized by elemental analyses, IR, ¹H, ¹³C and ¹¹⁷Sn NMR and ¹¹⁹Sn Mössbauer spectroscopy and their structures were determined by X-ray crystallography, complemented by ¹¹⁷Sn CP-MAS NMR spectroscopy studies in the solid state. The crystal structure of 1 reveals a distorted trigonal bipyramidal coordination geometry around the Sn-atom where the Cl- and N-atoms of ligand L¹ occupy the axial positions. In complexes 2-5, the molecules are centrosymmetric dimers in which the Sn-atoms are connected by asymmetric μ-O bridges through the quinoline O-atom to give an Sn₂O₂ core. The differences in the Sn-O bond lengths within the bridge range from 0.28 to 0.48 Å, with the longer of the Sn-O distances being in the range 2.56-2.68 Å and the most symmetrical bridge being in 5. The carboxylate group is almost symmetrically bidentate coordinated to the tin atom in 5 (Sn-O distances of 2.327(2) and 2.441(2) Å), unlike the other complexes in which the distance of the carboxylate carbonyl O-atom from the tin atom is in the range 2.92-3.03 Å. The structure of 5 displays a more regular pentagonal bipyramidal coordination geometry about each tin atom than in 2-4. In contrast, the centrosymmetric dimeric structure of 6 involves asymmetric carboxylate bridges, resulting in a different Sn₂C₂O₄ motif. The Sn-O bond lengths in the bridge differ by about 0.6 Å, with the longer distance involving the carboxylate carbonyl O-atom (2.683(2) and 2.798(2) Å for two molecules in the asymmetric unit). The carboxylate carbonyl O-atom has a second, even longer intramolecular contact to the Sn-atom to which the carboxylate group is primarily coordinated, with these Sn?O distances being as high as 3.085(2) and 2.898(2) Å. If the secondary interactions are considered, all the di-n-butyltin(IV) complexes (2-6) display a distorted pentagonal bipyramidal arrangement about each tin atom in which the n-butyl groups occupy the axial positions.     

Different recognitions of (E)- and (Z)-1,1′-binaphthyl ketoximes using lipase-catalyzed reactions

Lipase-catalyzed hydrolysis of (E)-2-[α-(acetoxyimino)benzyl]-1,1′-binaphthyl [(±)-1a] and (Z)-2-[α-(acetoxyimino)benzyl]-1,1′-binaphthyl [(±)-1b] yielded optically active (E)-2-[α-(hydroxyimino)benzyl]-1,1′-binaphthyl [(S)-2a] and (Z)-2-[α-(hydroxyimino)benzyl]-1,1′-binaphthyl [(R)-2b], respectively, with high enantiomeric excess. Selectivity for the opposite enantiomer of the axial binaphthyl skeleton was shown by (Z)-isomer 1b against (E)-isomer 1a.     

Adsorption effects of poly(hydroxybutyric acid) depolymerase on chain-folding surface of polyester single crystals revealed by mutant enzyme and frictional force microscopy

Adsorption effects of poly(hydroxybutyric acid) (PHB) depolymerase from Ralstonia pickettii T1 on various polymer single crystals were studied using a catalytically inactive mutant of PHB depolymerase by means of transmission electron microscopy (TEM), atomic force microscopy (AFM), and frictional force microscopy (FFM). Six types of polymer single crystals, poly[(R)-3-hydroxybutyric acid] (P(3HB)), poly[(R)-3-hydroxybutyric acid-co-6 mol% (R)-3-hydroxyvaleric acid] (P(3HB-co-6 mol% 3HV)), poly[(R)-3-hydroxybutyric acid-co-8 mol% (R)-3-hydroxyhexanoic acid] (P(3HB-co-8 mol% 3HH)), poly(l-lactic acid) (PLLA), poly(d-lactic acid) (PDLA), and polyethylene (PE), were prepared to examine the influence of an ester bond and stereoregularity of a polymer on the enzymatic adsorption. The numbers of PHB depolymerase enzymes adsorbed on P(3HB) and P(3HB-co-6 mol% 3HV) single crystals were determined as 171 and 183 enzymes/μm² by AFM, respectively. AFM observation revealed that the concentration of PHB depolymerase enzymes adsorbed onto PLLA and PDLA single crystals is much higher compared to those on a P(3HB) single crystal, whereas the concentration of enzyme adsorbed onto PE and P(3HB-co-8 mol% 3HH) single crystals is much less. In addition, the single crystals of each polymer were characterized by TEM and FFM before and after enzymatic treatment by mutant for 1 h at 37 °C. The surface properties of P(3HB), P(3HB-co-6 mol% 3HV), and P(3HB-co-8 mol% 3HH) single crystals were changed by the enzymatic adsorption, whereas the internal structures were not affected. On the basis of these results, the properties of the binding domain of PHB depolymerase to polymer chain-folding surfaces have been discussed.     

The characterization of (+/-)-anti-benzo[a]pyrene diolepoxide-DNA adducts and (+/-)-anti-dibenzo[a,l]pyrene diolepoxide--DNA adducts in the same DNA sample using solid-matrix phosphorescence

Solid-matrix phosphorescence (SMP) spectra and lifetimes were used to characterize the (±)-anti-benzo[a]pyrene diolepoxide [(±)-anti-B[a]PDE] and (±)-anti-dibenzo[a,l]pyrene diolepoxide [(±)-anti-DB[a,l]PDE] bonded to the same sample of DNA. SMP spectra and lifetimes were also acquired for two samples of DNA that had only (±)-anti-B[a]PDE or (±)-anti-DB[a,l]PDE bonded to the individual samples of DNA. A detailed comparison of the SMP properties was made among the three samples of DNA. The SMP excitation spectra for the (±)-anti-B[a]PDE-DNA and the (±)-anti-DB[a,l]PDE-DNA adducts were very similar. However, the SMP emission spectra of the two DNA adduct systems were very dissimilar with a major emission band for the (±)-anti-B[a]PDE-DNA adducts appearing at 613 nm and for the (±)-anti-DB[a,l]PDE-DNA adducts a major band was at 558 nm. It was possible to selectively use SMP emission wavelengths and obtain a SMP excitation of spectrum of the (±)-anti-DB[a,l]PDE-DNA adducts in the dual adducted DNA sample without the (±)-anti-B[a]PDE-DNA adducts emitting SMP. In addition, it was shown that the SMP emission spectrum of the dual adducted DNA sample could be used to detect both adduct systems in the modified DNA sample. It was demonstrated that the SMP lifetimes could be effectively employed to characterize the dual adducted DNA sample. For example, the SMP decay curve for the (±)-anti-DB[a,l]PDE-DNA adducts could be acquired without any SMP emission from the (±)-anti-B[a]PDE-DNA adducts. Also, ln(SMP intensity) versus time plots were very useful in characterizing the dual adducted DNA sample.     

A novel synthetic route for the total synthesis of (±)-uleine

In this study, a new synthetic route for the total synthesis of (±)-uleine is described. The important step in the synthesis of this alkaloid consists of an intramolecular cyclization of the D ring of the azocino[4,3-b]indole skeleton. Reduction of (N-methyl){3-β-ethyl-4-oxo-2,3,4,9-tetrahydrospiro[1H-carbazole-1,2′(1,3)dithiolane]-2-yl}-2-acetamide with borane yielded the corresponding (N-methyl){3-β-ethyl-4-hydroxy-2,3,4,9-tetrahydrospiro[1H-carbazole-1,2′(1,3)dithiolane]-2-yl}-2-acetamide, which underwent acid-catalyzed ring closure to produce azocino[4,3-b]indole core. Finally, the synthesis of (±)-uleine was completed through several steps from the azocino[4,3-b]indole core.     

Acid-catalyzed aza-Diels-Alder versus 1,3-dipolar cycloadditions of methyl glyoxylate oxime with cyclopentadiene

The acid-catalyzed 1,4- and 1,3-cycloadditions between methyl glyoxylate oxime (1) and cyclopentadiene were investigated using various Lewis and/or Bronsted acids at different temperatures in dichloromethane as solvent. Besides the expected new adducts, (±)-methyl [(3-exo)-2-hydroxy-2-azabicyclo[2.2.1]hept-5-ene]-3-carboxylate (2) and (±)-methyl [(3-endo)-2-hydroxy-2-azabicyclo[2.2.1]hept-5-ene]-3-carboxylate (3), a third adduct, (±)-methyl (1R,4R,5R)-(2-oxa-3-azabicyclo[3.3.0]oct-7-ene)-4-carboxylate (4), whose formation can be explained by a 1,3-dipolar cycloaddition, was obtained. Yields and product ratios were found to be more dependent on the catalyst than on the temperature; these results and the stereochemistry of the adducts, confirmed by spectroscopic data (¹H and ¹³C NMR) and by X-ray crystallography, were used to analyze and propose a mechanistic explanation for both cycloadditions.     

Synthesis of enantiopure, axially chiral, C-tetrasubstituted α-amino acids with binaphthyl-based crowned side chains and 3D-structural analysis of their peptides

The syntheses of the terminally protected, crowned, C^α-tetrasubstituted α-amino acids with only axial chirality, the two diastereomers Boc-(S)-Bip[(R)-Binol-22-C-6]-OMe and Boc-(R)-Bip[(R)-Binol-22-C-6]-OMe, and their respective enantiomers Boc-(R)-Bip[(S)-Binol-22-C-6]-OMe and Boc-(S)-Bip[(S)-Binol-22-C-6]-OMe, all derived from 2′,1′:1,2; 1″,2″:3,4-dibenzcyclohepta-1,3-diene-6-amino-6-carboxylic acid (Bip), were performed by bis-alkylation with cyclization of racemic (R+S)-Boc-[HO]₂-Bip-OMe, possessing two phenolic OH groups at the 6,6′-positions of the biphenyl frame of Bip, using (+)-(R)- and (−)-(S)-Binol[(OCH₂CH₂)₂OTs]₂ (2,2′-bis[5-tosyloxy-3-oxa-1-pentyloxy]-1,1′-binaphthyl), respectively, as the alkylating agent followed by chromatographic separation. Two series of terminally protected model peptides to the hexamer level, containing the (R)-Bip[(S)-Binol-22-C-6] residue at i and i+3 positions of the sequence, combined with either l-Ala or l-Ala/Aib, were synthesized by solution methods. Their 3D-structural analyses by FTIR absorption and NMR suggest that these peptides preferentially adopt folded secondary structures.     

Synthesis and optical properties of conjugated N,N-dimethyl and thienyl end-capped 2,5-(arylethynyl)thiophene oligomer structures

End-capped (N,N-dimethylaminophenyl) and 2′-thienylethynyl 2,5-thiophene oligomer structures were synthesized by heterocoupling between the terminal acetylenes such as: p-(N,N-dimethylaminophenyl)ethyne (3) [or 1-(p-(N,N-dimethylaminophenyl)-2-p-(ethynylphenyl)ethyne, 4]; p-(β-ethenyl-2′-thienyl)phenylethyne (E-9) [or p-(β-ethynyl-2′-thienyl)phenylethyne, 11], and 2,5-diiodothiophene, catalyzed by the Cl₂Pd(PPh₃)₂/CuI system, in good to excellent yields. The 2,5-di[(3′,5′-di(trimethylsilylethynyl)phenyl]_x-1-ethynyl]thiophene oligomers were prepared by heterocoupling between 3′,5′-di[(trimethylsilylethynyl)phenyl]_x-1-ethyne (n = 0-2) terminal acetylenes and 2,5-diiodothiophene, in excellent yields. The terminal acetylenes were efficiently prepared by a specific protection-deprotection methodology. All the ethynylphenyl compounds obtained show fluorescence radiation emission, with a bathochromic shift of the wavelength that increases with the chain conjugation.     

Various coordination architectures constructed from N-[(carboxyphenyl)-sulfonyl]glycine: Structural variation via ligand isomerism effects and metal-directed assembly

Using Cu(II), Mn(II) or Co(II) salt and the flexible ligands, N-[(4-carboxyphenyl)-sulfonyl]glycine (H₃L₁) and N-[(3-carboxyphenyl)-sulfonyl]glycine (H₃L₂), a series of new coordination polymers, [Mn(phen)(H₂O)₄][HL₁] (1), [Co₃(L₁)₂(bipy)₃(H₂O)₆]_n·8nH₂O (2), [Cu₄(L₁)₂(OH)₂(bipy)₄]_n·12nH₂O (3), [Na(H₂L₁)(H₂O)]_n (4), [Mn₂(HL₂)₂(dpe)₃(H₂O)₂]_n·ndpe (5), (phen = 1,10-phenanthroline, bipy = 4,4′-bipyridine, dpe = 1,2-di(4-pyridyl)ethylene), varying from 0D to 3D, have been synthesized and structurally characterized. Compound 1 has a [Mn(phen)(H₂O)₄]²⁺ cation and a HL₁²⁻ anion. Compound 2 features a new 1D triple chain, based on octahedral cobalt atoms bridged by bipy molecules and terminally coordinated by two H₃L₁ ligands. Compound 3 has a 2D layered structure, constructed from new alternating chains where H₃L₁, hydroxyl and water molecules simultaneously act as bridging ligands. Compound 4 possesses a bilayer structure in which two adjacent layers are pillared by H₃L₁ ligands into a 2D bilayer network. Compound 5 is a unique 3D coordination polymer in which each Mn center binds two trans-located dpe molecules. The thermal stability as well as magnetic properties of 5 was also studied. This work and our previous work indicate that the positional isomer of the anionic N-[(carboxyphenyl)-sulfonyl]glycine is important in the construction of these network structures, which are also significantly regulated by the metal centers.     

Conduramine F-1 epoxides: synthesis and their glycosidase inhibitory activities

Starting from (±)-7-oxanorbornenone ((±)-14), (±)-(1RS,2RS,3SR,6SR)-6-azidocyclohex-4-en-1,2,3-triol ((±)-24) and (±)-(1RS,2RS,3SR,6RS)-6-azidocyclohex-4-en-1,2,3-triol ((±)-26) were obtained. Epoxidation of the latter cyclohexene derivative gave two epoxides (±)-30 and (±)-31 that were converted into (±)-conduramine F-1 epoxides (±)-10 and (±)-11 and N-substituted derivatives (±)-12 and (±)-13. Compound (±)-(1RS,2SR,3RS,4SR,5RS,6SR)-5-({[4-(trifluoromethyl)phenyl]methyl}amino)-7-oxabicyclo[4.1.0]heptane-2,3,4-triol ((±)-12c) is a good, non-competitive inhibitor of β-xylosidase from Aspergillus niger (K_i=2.2 μM), and (±)-(1RS,2RS,3SR,4RS,5SR,6SR)-5-{[(biphenyl-4-yl)methyl]amino}-7-oxabicyclo[4.1.0]heptane-2,3,4-triol ((±)-13d) is a good inhibitor of α-glucosidase from brewer's yeast (K_i=2.8 μM, non-competitive).     

Chiral self-assembly of triorganotin complexes: Syntheses, characterization, crystal structures and antitumor activity of organotin(IV) complexes containing (R)-(+)-methylsuccinic acid, (S)-(+)-methylglutaric acid and l-(−)-malic acid ligands

Six new chiral triorganotin(IV) complexes, {(R₃Sn)₂[C₃H₆(COO)₂]}_n (R = Me: 1; Bu: 2), {(R₃Sn)₂[C₄H₈(COO)₂]}_n (R = Me: 3; Bu: 4), and {(R₃Sn)₂[C₂H₄O(COO)₂]}_n (R = Me: 5; Bu: 6) have been prepared by treatment of (R)-(+)-methylsuccinic acid, (S)-(+)-methylglutaric acid and l-(−)-malic acid, with the corresponding R₃SnCl (R = Me, Bu) and sodium ethoxide in methanol. All the complexes were characterized by elemental analysis, FT-IR, NMR (¹H, ¹³C, ¹¹⁹Sn) spectroscopy and TGA. Except for 3, all of the complexes were also characterized by X-ray crystallography. The structural analyses reveal that complexes 1 and 5 have 2D network structures in which (R)-(+)-methylsuccinic acid and l-(−)-malic acid act as tetradentate ligands coordinated to trimethyltin(IV) ions. Complexes 2 and 4 have 3D metal-organic framework structures in which the deprotoned acids serve as tetradentate ligands. Complex 6 adopts a 1D zigzag chain structure and forms a 2D supramolecular framework through intermolecular C-H?O interactions. In addition, the antitumor activities of complexes 1-6 have been studied. We also have measured the specific rotation of the chiral dicarboxylic acids and the organotin derivatives.     

Effect of the alkyl chain length of 1,1′-binaphthyl esters in lipase-catalyzed amidation

Lipase-catalyzed amidation of 2-[2-(ethoxycarbonyl)ethyl]-1,1′-binaphthyl [(±)-3] yielded optically active (S)-3 and 2-[2-(2-cyanoethylaminocarbonyl)ethyl]-1,1′-binaphthyl [(R)-6a] with high enantiomeric excess. For these lipase-catalyzed amidations, the optimal alkyl chain length between the binaphthyl ring and the ester group was determined to be an ethylene spacer.     

Synthesis and characterization of chiral mono N-heterocyclic carbene-substituted rhodium complexes and their catalytic properties in hydrosilylation reactions

Different chiral mono-substituted N-heterocyclic carbene complexes of rhodium were prepared, starting from [Rh(COD)Cl]₂ (COD = cyclooctadiene) by addition of free N-heterocyclic carbenes (NHC), or an in-situ deprotonation of the corresponding iminium salt. All new complexes were characterized by spectroscopy methods. In addition, the structures of chloro(η⁴-1,5-cyclooctadiene)(1,3-di-[(1R,2R,3R,5S)-2,6,6-trimethylbicyclo[3.1.1]hept-3-yl] imidazolin-2-ylidene)rhodium(I) (5a), chloro(η⁴-1,5-cyclooctadiene)(1,3-di-[(1R,2S,5R)-2-isopropyl-5-menthylcyclohex-1-yl]imidazol-2-ylidene)rhodium(I) (5b) and chloro(η⁴-1,5-cyclooctadiene)(1,3-di-[(2R,4S,5S)-2-methyl-4-phenyl-1,3-dioxacyclohex-5-yl]imidazolin-2-ylidene)rhodium(I) (5i) were analyzed by DFT-calculations. The enantioselective hydrosilylation of acetophenone, ethylpyruvate and n-propylpyruvate with diphenylsilane and hydrolysis was carried out with chiral C₂-symmetrical mono-substituted N-heterocyclic carbene rhodium complexes giving for the first time an enantioselective excess of up to 74% ee in the case of the n-propylpyruvate.     

Dibenzyltin(IV) complexes of the 5-[(E)-2-(aryl)-1-diazenyl]quinolin-8-olates: Synthesis and an investigation of structures by X-ray diffraction, solution and solid-state tin NMR, Sn Mössbauer and electrospray ionization MS

A series of cis-bis{5-[(E)-2-(aryl)-1-diazenyl]quinolinolato}dibenzyltin(IV) complexes have been synthesized by reacting sodium salts of 5-[(E)-2-(aryl)-1-diazenyl]quinolin-8-ol (LH) and dibenzyltin dichloride. These complexes have been characterized by ¹H, ¹³C, ¹¹⁹Sn NMR, ESI-MS in solution and by IR and ^119mSn Mössbauer, ¹¹⁷Sn CP-MAS NMR spectroscopy in solid state. In addition, the structures of three of the dibenzyltin(IV) complexes, viz., Bz₂Sn(L²)₂ (2), Bz₂Sn(L³)₂ (3), and Bz₂Sn(L⁵)₂ (5) (L = 5-[(E)-2-(aryl)-1-diazenyl]quinolin-8-ol: aryl = 4′-methylphenyl- (L²H), 4′-methoxylphenyl- (L³H) and 4′-bromophenyl- (L⁵H)) were determined by single-crystal X-ray diffraction. In general, the complexes were found to adopt a distorted cis-octahedral arrangement around the tin atom in both solution and solid state.     

3-Oxyanthranilic acid derivatives from Actinomadura sp. BCC27169

Eight new compounds including 9′-[2-amino-3-(4″-O-methyl-α-rhamnopyranosyloxy) phenyl]nonanoic acid (1), 9′-[2-amino-3-(4″-O-methyl-α-ribopyranosyloxy)phenyl] nonanoic acid (2), 11′-[2-amino-3-(4″-O-methyl-α-rhamnopyranosyloxy)phenyl]undecanoic acid (3), 11′-[2-amino-3-(4″-O-methyl-α-ribopyranosyloxy)phenyl]undecanoic acid (4), 8-(4′-O-methyl-α-rhamnopyranosyloxy)-3,4-dihydroquinolin-2(1H)-one (5), 8-(4′-O-methyl-α-ribopyranosyloxy)-3,4-dihydroquinolin-2(1H)-one (6), 8-(4′-O-methyl-α-rhamnopyranosyloxy)-2-methyquinoline (7), and 8-(4′-O-methyl-α-ribopyranosyloxy)-2-methylquinoline (8) were isolated from Actinomadura sp. BCC27169. The chemical structures of these compounds were determined based on NMR and high-resolution mass spectroscopy. The absolute configurations of these monosaccharides were revealed by the hydrolysis of compounds 7 and 8. Compounds 3 and 8 exhibited antitubercular activity at MIC 50 μg/mL. Only compound 3 showed cytotoxicity against KB cell at IC₅₀ 18.63 μg/mL, while other isolated compounds were inactive at tested maximum concentration (50 μg/mL).     

Tetratriacontanonaenoic acid, first natural acid with nine double bonds isolated from a crustacean Bathynella natans

The very-long-chain polyunsaturated fatty acid—allZ-4,7,10,13,16,19,22,25,28-tetratriacontanonaenoic acid was determined and identified in the freshwater crustacean species Bathynella natans living in caves of central Europe by means of liquid chromatography—mass spectrometry with atmospheric pressure chemical ionization. The full structure was elucidated by using extensive spectroscopic analysis (¹H and ¹³C NMR, MS, IR and UV) including a chemical method. This acid was described in nature for the first time. A hypothesis is suggested for its origin and biosynthesis.