Synthesis of trans‐Disubstituted Alkenes by Cobalt‐Catalyzed Reductive Coupling of Terminal Alkynes with Activated Alkenes

A cobalt‐catalyzed reductive coupling of terminal alkynes, RC?CH, with activated alkenes, R′CH?CH₂, in the presence of zinc and water to give functionalized trans‐disubstituted alkenes, RCH?CHCH₂CH₂R′, is described. A variety of aromatic terminal alkynes underwent reductive coupling with activated alkenes including enones, acrylates, acrylonitrile, and vinyl sulfones in the presence of a CoCl₂/P(OMe)₃/Zn catalyst system to afford 1,2‐trans‐disubstituted alkenes with high regio‐ and stereoselectivity. Similarly, aliphatic terminal alkynes also efficiently participated in the coupling reaction with acrylates, enones, and vinyl sulfone, in the presence of the CoCl₂/P(OPh)₃/Zn system providing a mixture of 1,2‐trans‐ and 1,1‐disubstituted functionalized terminal alkene products in high yields. The scope of the reaction was also extended by the coupling of 1,3‐enynes and acetylene gas with alkenes. Furthermore, a phosphine‐free cobalt‐catalyzed reductive coupling of terminal alkynes with enones, affording 1,2‐trans‐disubstituted alkenes as the major products in a high regioisomeric ratio, is demonstrated. In the reactions, less expensive and air‐stable cobalt complexes, a mild reducing agent (Zn) and a simple hydrogen source (water) were used. A possible reaction mechanism involving a cobaltacyclopentene as the key intermediate is proposed.     

Palladium-catalyzed cross-coupling of 2-haloselenophene with terminal alkynes in the absence of additive

We present herein our results of the Sonogashira coupling reaction of 2-haloselenophenes with terminal alkynes catalyzed by PdCl₂(PPh₃)₂, under co-catalyst free conditions and establish a new procedure to prepare (2-alkynyl)-selenophenes in good yields. The reaction proceeded cleanly under mild reaction conditions and was performed with propargylic alcohols, protected propargylic alcohols, propargylic amines, as well as alkyl, and aryl alkynes, in the presence of PdCl₂(PPh₃)₂, Et₃N, DMF, and in the absence of any supplementary additives. In addition, by this protocol (2,5-bis-alkynyl)-selenophenes were also obtained, in a one pot procedure, using 2,5-bis-iodoselenofene with an excess of terminal alkynes.     

Sonogashira coupling with aqueous ammonia directed to the synthesis of azotolane derivatives

Sonogashira coupling with aqueous ammonia is tolerable for the reaction of aryl iodides or terminal alkynes bearing an azobenzene group. The reaction of (4-heptyloxyphenyl)ethyne with (4-heptyloxyphenyl)-(4-iodophenyl)diazene in the presence of 1 mol% of PdCl₂(PPh₃)₂, 2 mol% of CuI, and 2 equiv of 0.5 M aqueous ammonia gives the corresponding azotolane in 87% isolated yield after stirring at room temperature for 15 h.     

Tandem versus single C-C bond forming reaction under palladium-copper catalysis: regioselective synthesis of α-pyrones fused with thiophene

We herein report a highly convenient protocol for rapid construction of α-pyrone fused with thiophene. This includes one-pot and regioselective synthesis of 4,5-disubstituted and 5-substituted thieno[2,3-c]pyran-7-ones, 6,7-disubstituted and 6-substituted thieno[3,2-c]pyran-4-ones. The synthesis of thieno[2,3-c]pyran-7-ones involves palladium mediated cross coupling of 3-iodothiophene-2-carboxylic acid with terminal alkynes in a simple synthetic operation. The coupling-cyclization reaction was initially studied in the presence of Pd(PPh₃)₂Cl₂ and CuI in a variety of solvents. 5-Substituted 4-alkynylthieno[2,3-c]pyran-7-ones were isolated in good yields when the reaction was performed in DMF. Similarly, 6-substituted 7-alkynylthieno[3,2-c]pyran-4-ones were synthesized via palladium-catalyzed cross coupling of 2-bromothiophene-3-carboxylic acid with terminal alkynes. A tandem C-C bond forming reaction in the presence of palladium catalyst rationalizes the formation of coupled product in this apparently three-component reaction. The cyclization step of this coupling-cyclization-coupling process occurs in a regioselective fashion to furnish products containing six-membered ring only. This sequential C-C bond forming reaction however, can be restricted to the formation of single C-C bond by using 10% Pd/C-Et₃N-CuI-PPh₃ as catalyst system in the cross coupling reaction. 5-Substituted thieno[2,3-c]pyran-7-ones were obtained in good yields when the coupling reaction was performed under this condition. Some of the compounds synthesized were tested in vitro for their anticancer activities.     

Identifying a Highly Active Copper Catalyst for KA2 Reaction of Aromatic Ketones

The well‐established A³ coupling reaction of terminal alkynes, aldehydes, and amines provides the most straightforward approach to propargylic amines. However, the related reaction of ketones, especially aromatic ketones, is still a significant challenge. A highly efficient catalytic protocol has been developed for the coupling of aromatic ketones with amines and terminal alkynes, in which Cu^I, generated in situ from the reduction of CuBr₂ with sodium ascorbate, has been identified as the highly efficient catalyst. Since propargylic amines are versatile synthetic intermediates and important units in pharmaceutical products, such an advance will greatly stimulate research interest involving the previously unavailable propargylic amines.     

Diorganyl tellurides as substrates in Sonogashira coupling reactions under mild conditions

Abstract

A new method of Sonogashira coupling reactions between diorganyl tellurides and terminal alkynes is reported. The coupling reactions are performed using Pd(dppf)Cl₂ as a catalyst, CuI as a co-catalyst in the presence of K₂CO₃ in DMSO. The reactions are carried out at room temperature and completed within 2?h when phenyl acetylene is used as a terminal alkyne. For aliphatic terminal alkynes, such as 1-hexyne and 1-octyne, an elevated temperature and longer reaction time are needed for the completion of the reactions. This process results in good yields of Sonogashira coupling products which is applicable for diaryl, divinyl and dialkynyl tellurides but not applicable for dialkyl tellurides.     

Highly modulated bisindoles: ligands for copper‐catalyzed Sonogashira reaction

Bisindoles (BIMs) were modulated as powerful N,N′ donor ligands for the copper‐catalyzed Sonogashira reaction. Ligand screening experiments on 11 BIM compounds found that 3,3′‐(4‐chlorophenyl)methylenebis(1‐methyl‐1H‐indole) (10%) efficiently accelerated CuCl (5%)‐catalyzed cross‐coupling of aryl iodides with terminal alkynes. A wide range of substituted aryl iodides and/or alkyl‐ and aryl‐substituted terminal alkynes were examined, leading to the corresponding coupling products with yields up to 99%. An efficient and scalable protocol for the synthesis of BIM ligands on a gram scale, with extremely low catalyst loading of o‐ClC₆H₄NH₃⁺Cl^?, was also developed with a reaction time of 20 min with yields up to 93%. This novel N,N′ ligand was air‐stable, easily available and highly modulated with low copper loading. Copyright © 2016 John Wiley & Sons, Ltd.     

Cobalt‐Catalyzed,Aminoquinoline‐Directed C(sp2)?H Bond Alkenylation by Alkynes

A method for cobalt‐catalyzed, aminoquinoline‐ and picolinamide‐directed C(sp²) H bond alkenylation by alkynes was developed. The method shows excellent functional‐group tolerance and both internal and terminal alkynes are competent substrates for the coupling. The reaction employs a Co(OAc)₂⋅4 H₂O catalyst, Mn(OAc)₂ co‐catalyst, and oxygen (from air) as a terminal oxidant.     

Cobalt‐Catalyzed,Aminoquinoline‐Directed C(sp2)H Bond Alkenylation by Alkynes

A method for cobalt‐catalyzed, aminoquinoline‐ and picolinamide‐directed C(sp²)? H bond alkenylation by alkynes was developed. The method shows excellent functional‐group tolerance and both internal and terminal alkynes are competent substrates for the coupling. The reaction employs a Co(OAc)₂?4 H₂O catalyst, Mn(OAc)₂ co‐catalyst, and oxygen (from air) as a terminal oxidant.     

A New Iterative Approach for the Synthesis of Oligo(phenyleneethynediyl) Derivatives and Its Application for the Preparation of Fullerene?Oligo(phenyleneethynediyl) Conjugates as Active Photovoltaic Materials

Disymmetrically substituted oligo(phenyleneethynediyl) (OPE) derivatives were prepared from 2,5‐bis(octyloxy)‐4‐[(triisopropylsilyl)ethynyl]benzaldehyde ( 5 ) by an iterative approach using the following reaction sequence: i) Corey–Fuchs dibromoolefination, ii) treatment with an excess of lithium diisopropylamide, and iii) a metal‐catalyzed cross‐coupling reaction of the resulting terminal alkyne with 2,5‐diiodo‐1,4‐bis(octyloxy)benzene ( 3 ) (Schemes 2 and 3). Reaction of the OPE dimer 8 and trimer 13 thus obtained with N‐methylglycine and C₆₀ in refluxing toluene gave the corresponding C₆₀? OPE conjugates 16 and 17 , respectively (Scheme 4). On the other hand, treatment of the protected terminal alkynes 8 and 13 with Bu₄N followed by reaction of the resulting 9 and 14 with 4‐iodo‐N,N‐dibutylaniline under Sonogashira conditions yielded 10 and 15 , respectively (Schemes 2 and 3). Subsequent treatment with N‐methylglycine and C₆₀ in refluxing toluene furnished the C₆₀? OPE derivatives 18 and 19 (Scheme 4). Compound 9 was also subjected to a Pd‐catalyzed cross‐coupling reaction with 3 to give the centrosymmetrical OPE pentamer 20 (Scheme 5). Subsequent reduction followed by reaction of the resulting diol 21 with acid 22 under esterification conditions led to bis‐malonate 23 . Oxidative coupling of terminal alkyne 14 with the Hay catalyst gave bis‐aldehyde 24 (Scheme 6). Treatment with diisobutylaluminium hydride followed by dicylcohexylcarbodiimide‐mediated esterification with acid 22 gave bis‐malonate 26 . Finally, treatment of bis‐malonates 23 and 26 with C₆₀, I₂, and 1,8‐diazabicylco[5.4.0]undec‐7‐ene (DBU) in toluene afforded the bis[cyclopropafullerenes] 27 and 28 , respectively (Scheme 7). The C₆₀ derivatives 16 – 19, 27 , and 28 were tested as active materials in photovoltaic devices. Each C₆₀? OPE conjugate was sandwiched between poly(3,4‐ethylenedioxythiophene)‐poly(styrenesulfonate)‐covered indium tin oxide and aluminium electrodes. Interestingly, the performances of the devices prepared from the N,N‐dialkylaniline‐terminated derivatives 18 and 19 are significantly improved when compared to those obtained with 16, 17, 27 , and 28 , thus showing that the efficiency of the devices can be significantly improved by increasing the donor ability of the OPE moiety.     

Stereoselective Synthesis of 1,3-Enynyl Tellurides by Palladium-Catalyzed Cross-Coupling Reaction

The coupling reaction of (E)-β-bromovinyl tellurides with terminal alkynes by using catalyst of PdCl₂(PPh₃)₂-CuI in the presence of Et₃N as a base give the corresponding 1, 3-enynyl tellurides     

Synthesis of 3-substituted benzo[g]isoquinoline-5,10-diones: a convenient one-pot Sonogashira coupling/iminoannulation procedure

A series of 3-substituted 5,10-dimethoxybenzo[g]isoquinolines were prepared by coupling of terminal alkynes with the tert-butylimine of 3-bromo-1,4-dimethoxy-2-naphthaldehyde in the presence of a Pd-catalyst and subsequent Cu-catalyzed cyclization of the intermediate 3-alkynyl-2-naphthylcarbaldehyde. A CAN-mediated oxidative demethylation yielded the corresponding 2-azaanthraquinones in excellent yields. Since this methodology proved to be limited to alkynes bearing aromatic groups, an alternative and more general Pd-catalyzed coupling procedure was developed, starting from 3-bromo-1,4-dimethoxy-2-naphthaldehyde. For more acidic terminal alkynes, like phenylacetylene, a combination of Pd(OAc)₂/P(t-Bu)₃/CuI (2/6/1) with potassium carbonate in DMF gave a complete conversion within 24 h. For less acidic acetylenes, 2 equiv of alkyne and caesium carbonate as a base were required in order to obtain complete conversion of the starting material within 24 h. These altered Sonogashira conditions also allowed the isolation of a benzo[f]indenone as an interesting side product in case Bu₄NCl was added to the reaction mixture. The 3-alkynyl-1,4-dimethoxy-2-naphthaldehyde acquired after completion of the Pd-catalyzed coupling could be cyclized by adding a solution of ethanolic ammonia and an extra equivalent of potassium carbonate to the reaction mixture. As such, this consecutive one-pot coupling/iminoannulation procedure was a convenient alternative to the Larock isoquinoline procedure, enabling the isolation of a series of 3-substituted 5,10-dimethoxybenzo[g]isoquinolines.     

Facile synthesis of alkynyl‐, aryl‐ and ferrocenyl‐substituted pyrazoles via Sonogashira and Suzuki–Miyaura approaches

A concise and efficient synthesis of densely substituted novel pyrazoles with alkynyl, aryl and ferrocenyl functionalities is reported, providing a platform for biological studies. The general strategy involves Sonogashira and Suzuki–Miyaura cross‐coupling reactions of easily obtainable 5‐ferrocenyl/phenyl‐4‐iodo‐1‐phenylpyrazoles with terminal alkynes and boronic acids, respectively. The starting 4‐iodopyrazoles were synthesized by electrophilic cyclization of α,β‐alkynic hydrazones with molecular iodine. Sonogashira reactions have been achieved by employing 5 mol% PdCl₂(PPh₃)₂, 5 mol% CuI, excess Et₃N and 1.2 equiv. of terminal alkyne, relative to 4‐iodopyrazole, in tetrahydrofuran at 65 °C, while Suzuki–Miyaura reactions have been accomplished using 5 mol% PdCl₂(PPh₃)₂ and 1.4 equiv. of both boronic acid/ester and KHCO₃, with respect to 4‐iodopyrazole, in 4:1 dimethylformamide–H₂O solution at 110 °C. Both Sonogashira and Suzuki–Miyaura coupling reactions have proven effective for the synthesis of alkynyl‐, aryl‐ and ferrocenyl‐substituted pyrazoles and demonstrated good tolerance to a diverse range of substituents, including electron‐donating and electron‐withdrawing groups. These coupling approaches could allow for the rapid construction of a library of functionalized pyrazoles of pharmacological interest. Copyright © 2016 John Wiley & Sons, Ltd.     

A novel mode of access to polyfunctional organotin compounds and their reactivity in Stille cross-coupling reaction

Mono-, di-, tri- and tetra-functional organotin compounds were easily prepared in a sonicated Barbier reaction using ultrasound technology via coupling reaction of organo halides with tin halides (Bu₃SnCl, Bu₂SnCl₂, BuSnCl₃, SnCl₄) mediated by magnesium metal. The di- and tri-functional organotin compounds were tested in a Stille cross-coupling reaction in order to ascertain how many groups were transferred.     

Direct Oxidative Coupling of Arenes with Olefins by Rh‐Catalyzed C?H Activation in Air: Observation of a Strong Cooperation of the Acid

A [{RhCl(cod)}₂]/CCl₃COOH system was developed for the oxidative coupling of non‐chelate‐assisted arenes with olefins in the presence of catalytic amounts of Cu(OAc)₂ ? H₂O as a co‐oxidant and oxygen as the terminal oxidant. The acid was an indispensable component in this system and played a very important role in the coupling reaction. This catalytic system was applied to the direct oxidative coupling of a series of arenes and olefins and the corresponding products were afforded in high yields with special chemo‐ and regioselectivity. This reaction provides an atom‐efficient route to vinylarenes, which are widely used in various fine chemicals.     

Asymmetric Synthesis XIV: TiCl(Oipr)3-Promoted Asymmetric Coupling Reaction of D-Camphor Ketimine Anion

Optically active 1, 2-Diphenylethylendiamine(9) is obtained by asymmetric oxidative coupling reaction of d-camphor ketimine anion (4). Among various oxidating agents, TiCl(Oipr)₃ is better than l₂, Br₂, CuCl₂, FeCl₃ and BrCH₂CH₂Br.     

Matrix Isolation Spectroscopic and Relativistic Quantum Chemical Study of Molecular Platinum Fluorides PtFn (n=1–6) Reveals Magnetic Bistability of PtF4

Molecular platinum fluorides PtF_n, n=1–6, are prepared by two different routes, photo-initiated fluorine elimination from PtF₆ embedded in solid noble-gas matrices, and the reaction of elemental fluorine with laser-ablated platinum atoms. IR spectra of the reaction products isolated in rare-gas matrices under cryogenic conditions provide, for the first time, experimental vibrational frequencies of molecular PtF₃, PtF₄ and PtF₅. Photolysis of PtF₆ enabled a highly efficient and almost quantitative formation of molecular PtF₄, whereas both PtF₅ and PtF₃ were formed simultaneously by subsequent UV irradiation of PtF₄. The vibrational spectra of these molecular platinum fluorides were assigned with the help of one- and two-component quasirelativistic DFT computation to account for scalar relativistic and spin–orbit coupling effects. Competing Jahn-Teller and spin–orbit coupling effects result in a magnetic bistability of PtF₄, for which a spin-triplet (³B_2g, D_2h) coexists with an electronic singlet state (¹A_1g, D_4h) in solid neon matrices.     

Successive Synthesis of Regular and Asymmetric Star-Branched Polymers by Iterative Methodology Based on Living Anionic Polymerization Using Functionalized 1,1-Diphenylethylene Derivatives

In order to achieve the successive synthesis of star-branched polymers, we have developed a new iterative methodology which involves only three sets of the reactions in each iterative process: (a) a coupling reaction of a living anionic polymer with 1,1-bis(3-chloromethylphenyl)ethylene to prepare a DPE-chain-functionalized polymer, (b) an addition reaction of sec-BuLi to the DPE-chain-functionalized polymer, followed by treatment with 1-(4-(4-bromobutyl)phenyl)-1-phenylethylene to prepare a new DPE-chain-functionalized polymer whose DPE is separated by four methylene units from the main chain, and (c) a coupling reaction of 1,1-bis(3-chloromethylphenyl)ethylene with the polymer anion derived from the newly prepared DPE-chain-functionalized polymer and sec-BuLi. With this methodology, a series of well-defined 4-arm, 8-arm, and 16-arm regular star-branched polystyrenes as well as 4-arm A₂B₂, 8-arm A₄B₄, and 16-arm A₈B₈ asymmetric star-branched polymers comprising polystyrene and poly(α-methylstyrene) segments have been successively synthesized.     

Regioselective construction of six-membered fused heterocyclic rings via Pd/C-mediated C-C coupling followed by iodocyclization strategy: a new entry to 2H-1,2-benzothiazine-1,1-dioxides

We describe a practical and elegant method of constructing a thiazine ring fused with benzene under mild reaction conditions. A variety of 4-iodo-2H-benzo[e][1,2]thiazine-1,1-dioxides were prepared with high regioselectivity via a two-step process involving Pd/C-mediated C-C coupling of o-halobenzenesulfonamides with terminal alkynes, followed by iodocyclization of the resulting o-(1-alkynyl)arenesulfonamide using elemental iodine in acetonitrile. The coupling reaction was carried out using 10% Pd/C-PPh₃-CuI as a catalyst system in the presence of Et₃N. The process worked well for bromides and iodides, and a wide array of terminal alkynes containing alkyl and aryl substituents were employed. The iodocyclization step tolerated a variety of functional groups such as hydroxy, chloro, cyano, and methoxy, producing the six-membered heterocyclic ring selectively. The resulting 4-iodo-2H-benzo[e][1,2]thiazine-1,1-dioxides participated in Sonogashira, Heck, and Suzuki reactions producing a wide range of functionally substituted benzothiazines in good yields.     

Well‐Defined N‐Heterocyclic Carbene‐Palladium Complexes as Efficient Catalysts for Domino Sonogashira Coupling/Cyclization Reaction and C‐H bond Arylation of Benzothiazole

Well‐defined and air‐stable PEPPSI (Pyridine Enhanced Precatalyst Preparation Stabilization and Initiation) themed palladium bis‐N‐heterocyclic carbene complexes have been developed for the domino Sonogashira coupling/cyclization reaction of 2‐iodophenol with a variety of terminal alkynes and C‐H bond arylation of benzothiazole with aryl iodides. The PEPPSI themed palladium complexes, 2a and 2b were synthesized in good yields from the reaction of corresponding imidazolium salts with PdCl₂ and K₂CO₃ in pyridine. The new air‐stable palladium‐NHC complexes were characterized by NMR spectroscopy, X‐ray crystallography, elemental analysis, and mass spectroscopy studies. The PEPPSI themed palladium(II) bis‐N‐heterocyclic carbene complexes 2a and 2b exhibited excellent catalytic activities for domino Sonogashira coupling/cyclization reaction of 2‐iodophenol with terminal alkynes yielding benzofuran derivatives. In addition, the palladium complexes, 2a and 2b successfully catalyzed the direct C‐H bond arylation of benzothiazole with aryl iodides as coupling partners in presence of CuI as co‐catalyst.