Enhancement of polarization in bismuth titanate thin films co-modified by La and Nd for non-volatile memory applications

Bismuth titanate thin films co-modified by La and Nd, Bi_3.15(La_0.425Nd_0.425)Ti₃O₁₂ (BLNT) were grown on Pt/Ti/SiO₂/Si(100) substrates by metalorganic solution decomposition method. The co-substitution leads to structural distortion with enhanced remanent polarization. The BLNT film capacitor with a top Pt electrode showed a large remanent polarization (2P_r) of 90 μC/cm² at an applied voltage of 10 V, which is higher than that of highly c-axis oriented BLT, and comparable with BNdT thin films. The BLNT films exhibited a fatigue-free behavior up to 1×10⁹ switching cycles at a frequency of 1 kHz. These experimental results reveal that BLNT thin films can be used as capacitors in ferroelectric random access memory applications. PACS 73.40.Rw; 73.61.-r; 77.55. +F; 77.80.-E; 81.20.Fw     

Dependence of excess bismuth content in precursor sols on ferroelectric and dielectric properties of Bi3.25La0.75Ti3O12 thin films fabricated by chemical solution deposition

Bi_3.25La_0.75Ti₃O₁₂ (BLT) thin films were fabricated on Pt/Ti/SiO₂/Si(1 0 0) substrates by chemical solution deposition (CSD), and the dependence of ferroelectric and dielectric properties of the as-deposited BLT thin films on excess Bi content in precursor sols was studied. It is found that the prepared BLT thin film shows the best polarization-electric field, capacitance-voltage and dielectric constant (?_r)-frequency characteristics, when the value of excess Bi content in precursor sols is 10%. In detail, its remnant polarization (2P_r) value is 40 μC/cm², the capacitance tunability is 21% measured at room temperature under conditions of an applied voltage of 8 V and measurement frequency of 10 kHz, and the ?_r is 696 at 100 kHz frequency.     

Bi3.25La0.75Ti3O12 (BLT) nanotube capacitors for semiconductor memories

We report results of fabrication and examination of Bi_3.25La_0.75Ti₃O₁₂ (BLT) ferroelectric nanotubes. BLT nanotubes are suggested for developing 3D ferroelectric nanotube capacitors which could be used in high-density memory applications. BLT nanotubes were prepared by template-wetting process using polymeric sources where anodic aluminum oxide had been used as a template. After annealing, tubular BLT structures were crystallized inside the pores of the template. By selective etching of the template, released BLT nanotubes have been obtained. Crystallization and nucleation of the nanotubes were analyzed by XRD and FE-SEM techniques.     

Electric and ferroelectric properties of PZT/BLT multilayer films prepared by photochemical metal-organic deposition

The electric and ferroelectric properties of lead zirconate titanate (PZT) and lanthanum-substituted bismuth titanate (BLT) multilayer films prepared using photosensitive precursors were characterized. The electric and ferroelectric properties were investigated by studying the effect of the stacking order of four ferroelectric layers of PZT or BLT in 4-PZT, PZT/2-BLT/PZT, BLT/2-PZT/BLT, and 4-BLT multilayer films. The remnant polarization values of the 4-BLT and BLT/2-PZT/BLT multilayer films were 12 and 17 μC/cm², respectively. Improved ferroelectric properties of the PZT/BLT multilayer films were obtained by using a PZT intermediate layer. The films which contained a BLT layer on the Pt substrate had improved leakage currents of approximately two orders of magnitude and enhanced fatigue resistances compared to the films with a PZT layer on the Pt substrate. These improvements are due to the reduced number of defects and space charges near the Pt electrodes. The PZT/BLT multilayer films prepared by photochemical metal-organic deposition (PMOD) possessed enhanced electric and ferroelectric properties, and allow direct patterning to fabricate micro-patterned systems without dry etching.     

Temperature-dependent ferroelectric and dielectric properties of Bi3.25La0.75Ti3O12 thin films

To investigate temperature-dependent ferroelectric and dielectric properties of ferroelectric films, Bi_3.25La_0.75Ti₃O₁₂ (BLT) thin films were prepared on Pt-coated silicon substrates by pulsed laser deposition. The ferroelectric and dielectric behaviors have been studied in a wide temperature range from 80 K to room temperature. The saturated polarization (P_sat) decreases with decreasing temperature and decreasing electric field, whereas remnant polarization (P_r) shows a more complex temperature dependence. These results, which can be well explained based on a temperature-dependent charged defects-domain wall interaction model, might be helpful for further understanding the domain switching behavior. Based on these results, an alternative way to investigate temperature-dependent ferroelectric fatigue is proposed and experimentally carried out. The measured fatigue rate is found to be linearly dependent on temperature, consistent with the report on Pb(Zr,Ti)O₃ films. Temperature-dependent dielectric measurements of the films further confirm the above explanation.     

Structural and optical properties of Bi<Subscript>3.25</Subscript>La<Subscript>0.75</Subscript>Ti<Subscript>3</Subscript>O<Subscript>12</Subscript> ferroelectric thin films prepared by chemical solution methods

Ferroelectric Bi_3.25La_0.75Ti₃O₁₂ (BLT) thin films have been grown on Pt/Ti/SiO₂/Si substrates by chemical solution methods. X-ray diffraction analysis shows that BLT thin films are polycrystalline with (171)-preferential orientation. Atomic force microscopy investigation shows that they have large grains about 120 nm in size. A Pt/BLT/Pt capacitor has been fabricated and showed excellent ferroelectricity, with a remnant polarization and coercive field of 24 μC/cm² and 116 kV/cm, respectively. The capacitor shows no polarization fatigue up to 10⁹ switching cycles. The optical constants (n,k) of the BLT thin films in the wavelength range 0.35–1.7 μm were obtained by spectroscopic ellipsometry measurements, and the band-gap energy was found to be about 3.25 eV. Received: 16 October 2001 / Accepted: 6 January 2002 / Published online: 3 June 2002 RID="*" ID="*"Corresponding author. Fax: +86-21/65830-734, E-mail: gswang@mail.sitp.ac.cn     

Ferroelectric properties of Nd-substituted bismuth titanate thin films processed at low temperature

Nd-substituted bismuth titanate Bi_3.54Nd_0.46Ti₃O₁₂ (BNT) thin films were prepared on (111)Pt/Ti/SiO₂/Si substrates by a sol–gel method. The BNT thin films processed at a low annealing temperature of ∼600 °C showed good ferroelectric properties. The randomly oriented BNT single phases and the improved ferroelectric properties were confirmed by X-ray diffraction and polarization–electric field hysteresis loops, respectively. The remanent polarization of the BNT thin films is 64 μC/cm², which is larger than that of Bi_3.25La_0.75Ti₃O₁₂ (BLT) thin films. After 10¹⁰ read/write switching cycles, the effective non-volatile charges showed no polarization fatigue. Regardless of the low annealing temperature of 600 °C, the BNT thin films had good ferroelectric properties with high remanent polarizations and strong fatigue resistances. PACS 77.84.Dy     

Dielectric properties of ferroelectric/DMS heterointerface using YMnO3 and Ce doped Si

Bottom gate type Al/Si:8.2 at%Ce/YMnO₃/Pt capacitor was fabricated. Although it was polycrystalline, we successfully obtained Si:8.2 at%Ce film on ferroelectric YMnO₃. The dielectric properties of the capacitor were carefully investigated. Although the capacitance shows frequency dispersion, the capacitor exhibits a ferroelectric type C-V hysteresis loop. From the PUND and P-V measurements, ferroelectric polarization was distinguished from the another polarization, Based on these dielectric measurements, effect of polarization induced by the ferroelectric YMnO₃ on the carrier modulation in the diluted magnetic semiconductor, Ce doped Si film was discussed.     

Investigation of the electrical properties of metal-oxide-metal structures formed from RF magnetron sputtering deposited MgTiO3 films

Thin films of MgTiO₃ high-k dielectric have been prepared by RF magnetron sputtering deposition at various substrate temperatures. X-ray diffraction, atomic force microscopy were used to characterize the deposited films. Experimental results show that substrate temperature has little effect on the stoichinometry. The electrical properties of MgTiO₃ metal-insulator-metal (MIM) capacitors were investigated at various deposition temperatures, Pt/MgTiO₃/Pt/SiO₂/n-Si, were studied. It is shown that the MgTiO₃ (210 nm) MIM capacitor fabricated at 200 °C shows an overall high performance, such as a high capacitance density of ∼1.2 nF/um², a low leakage current of 1.51 × 10⁻⁹ A/cm² at 5 V, low-voltage coefficients of capacitance, and good frequency dispersion properties. All of these indicate that the MgTiO₃ MIM capacitors are very suitable for use in Si analog circuit application or dynamic random access memory (DRAM) cell.     

Ferroelectric Properties of Bi3.25La0.75Ti3O12 Thin Films Crystallized inDifferent N2/O2 Ambients

Bi3.25La0.75 Ti3O12 （BLT） ferroelectric thin films are deposited by sol-gel method and annealed for crystallizaion in total l eccm N2/02 mixed gas with various ratio at 750℃ for 30rain. The effect of crystallization ambient on the structural and ferroelectric properties of the BLT films is studied. The growth direction and grain size of BLT film are revealed to affect ferroeleetric properties. Alter the BLT film is annealed in 20%O2, the largest P~ value is obtained, which is ascribed to an increase of random orientation and large grain size. The fatigue property is improved with the concentration of oxygen in the ambient increasing, which is ascribed to annealing in the ambient with high concentrated oxygen adequately decreasing the defects related to lack of oxygen.     

Compositional dependence of ferroelectric properties of highly c-axis oriented Bi4−xNdxTi3O12 film capacitors

Highly c-axis oriented neodymium-modified bismuth titanate (Bi_4−xNd_xTi₃O₁₂) films having a variety of neodymium (Nd) contents were successfully grown on Pt/TiO₂/SiO₂/Si(100) substrates using metal-organic sol decomposition. After systematically examining ferroelectric properties of the c-axis oriented Bi_4−xNd_xTi₃O₁₂ film capacitors as a function of the Nd-content, we concluded that the capacitor with x=0.85 had the largest remanent polarization. The Bi_3.15Nd_0.85Ti₃O₁₂ capacitor fabricated using a top Pt electrode showed well-saturated polarization-electric field (P-E) switching curves with the remanent polarization (P_r) of 51 μC/cm² and the coercive field (E_c) of 99 kV/cm at an applied voltage of 10 V. More importantly, the Pt/Bi_3.15Nd_0.85Ti₃O₁₂/Pt capacitor exhibited fatigue-free behavior up to 4.5×10¹⁰ read/write switching cycles at a frequency of 1 MHz. The capacitor also demonstrated an excellent charge-retaining ability and a strong resistance against the imprinting failure.     

The effect of Si surface nitridation on the interfacial structure and electrical properties of (La2O3)0.5(SiO2)0.5 high-k gate dielectric films

Thermal stability, interfacial structures and electrical properties of amorphous (La₂O₃)_0.5(SiO₂)_0.5 (LSO) films deposited by using pulsed laser deposition (PLD) on Si (1 0 0) and NH₃ nitrided Si (1 0 0) substrates were comparatively investigated. The LSO films keep the amorphous state up to a high annealing temperature of 900 °C. HRTEM observations and XPS analyses showed that the surface nitridation of silicon wafer using NH₃ can result in the formation of the passivation layer, which effectively suppresses the excessive growth of the interfacial layer between LSO film and silicon wafer after high-temperature annealing process. The Pt/LSO/nitrided Si capacitors annealed at high temperature exhibit smaller CET and EOT, a less flatband voltage shift, a negligible hysteresis loop, a smaller equivalent dielectric charge density, and a much lower gate leakage current density as compared with that of the Pt/LSO/Si capacitors without Si surface nitridation.     

Thermo-Sensitive Ba0.64Sr0.36TiO3 Thin Film Capacitors for Dielectric Type Uncooled Infrared Sensors

Ba_0.64Sr_0.36TiO₃ (BST) thin films are prepared on Pt/Ti/SiO₂/Si₃N₄/SiO₂/Si substrates by a sol-gel method. Thermo-sensitive BST thin film capacitors with a Metal-Ferroelectrics-Metal (M-F(BST)-M) structure are fabricated as the active elements of dielectric type uncooled infrared sensors. XRD are employed to analyze the crystallographic structures of the films. AFM observations reveal a smooth and dense surface of the films with an average grain size of about 35 nm. Rapid temperature annealing (RTA) process is a very efficient way to improve crystallization quality. The preferable annealing temperature is 800°C for 1 min. The butterfly shaped C-V curves of the capacitors indicate the films have a ferroelectric nature. The dielectric constant and dielectric loss of the films at 100 kHz are 450 and 0.038, respectively. At 25°C, where the thermo-sensitive capacitors work, the temperature coefficient of dielectric constant (TCD) is about 5.9 %/°C. These results indicate that the capacitors with sol-gel derived BST thin films are promising to develop dielectric type uncooled infrared sensors.     

Metalorganic chemical vapor deposited DyScO3 buffer layer in Pt/Bi3.25Nd0.75Ti3O12/DyScO3/Si metal–ferroelectric–insulator–semiconductor diodes

High-k DyScO₃ linear dielectric films were considered as a buffer layer for the metal-ferroelectric-insulator-semiconductor (MFIS) structures with Aurivillius Bi_3.25Nd_0.75Ti₃O₁₂ ferroelectric films. The DyScO₃ films on Si substrates were amorphous and dense with a smooth surface morphology, showing negligible CV hysteresis and low leakage current. The remnant polarization of ～20 μC/cm², dielectric constant ～400, and the loss tangent ～0.04 were obtained for the ferroelectric Bi_3.25Nd_0.75Ti₃O₁₂ film on Pt/TiO₂/SiO₂/Si substrates. The Pt/Bi_3.25Nd_0.75Ti₃O₁₂/DyScO₃/Si MFIS capacitors showed a large memory window of 4.0 V and excellent retention up to 1000 s, encouraging results for practical applications in nonvolatile RAM.     

Enhanced fatigue property of PZT thin films using LaNiO3 thin layer as bottom electrode

A highly (100)-oriented metallic LaNiO₃ film was prepared directly on a Si substrate by a simple metalorganic decomposition (MOD) technique using lanthanum nitrate and nickel acetate as the starting sources. Subsequent Pb(Zr,Ti)O₃ (PZT) thin films deposited on the LaNiO₃-coated Si substrate were obtained by a modified sol–gel method. It was found that the PZT thin films began to form a single perovskite phase at a low annealing temperature of 530 °C, and exhibited highly (100) orientation. A ferroelectric capacitor of Pt/Pb(Zr,Ti)O₃/LaNiO₃/Si annealed at 600 °C displayed a good P-E hysteresis characteristic and was fatigue-free even after 10¹¹ switching cycles. Received: 25 May 2000 / Accepted: 9 August 2000 / Published online: 30 November 2000     

Highly (100)-oriented Eu-doped PZT thin films on sol-gel derived (100)-textured LaNiO<Subscript>3</Subscript>/Si substrates

(100)-oriented LaNiO₃ (LNO) thin films were grown on Si substrates by a sol-gel method followed by a rapid thermal process at temperatures ranging from 650 °C to 800 °C. The films produced at 700 °C had a resistivity of 1.79 mcm and could be used as bottom electrodes in the fabrication of ferroelectric capacitors on Si. Subsequently, a sol-gel derived Eu-doped Pb(Zr_0.52,Ti_0.48)O₃ (PEZT) thin film with a thickness of 130 nm prepared on the LNO electrode was found to have a (100)-oriented texture. Possible reasons for the high degree of (100) orientation in PEZT thin films are given. Good ferroelectric performance was obtained for Au/PEZT/LNO capacitors. The remnant polarization (2P_r) was found to be 22 C/cm² at a coercive electric field (E_c) of 134 kV/cm. After 10¹¹ polarization reversals, P_r decreased by only 15%. PACS 68.37.Yz; 68.37.Hk     

Microstructure and dielectric properties of pulsed-laser-deposited CaCu 3 Ti 4 O 12 thin films on LaNiO 3 buffered Pt/Ti/SiO 2 /Si substrates

CaCu₃Ti₄O₁₂ (CCTO) thin films have been prepared by a pulsed-laser-deposition method on LaNiO₃ buffered Pt/Ti/SiO₂/Si substrates, and their microstructure and dielectric properties have been compared with those of the films deposited directly on Pt/Ti/SiO₂/Si substrates. The crystalline structure and the surface morphology of the CCTO thin films were markedly affected by the bottom electrodes. Both the films show temperature-independent dielectric properties in a wide temperature range, which is similar to those properties obtained in single-crystal or epitaxial thin films, while the room-temperature dielectric constant of the 350-nm-thick CCTO films on LaNiO₃/Pt/Ti/SiO₂/Si substrates at 100 kHz was found to be 2300, which was increased significantly compared with that obtained in the films on Pt/Ti/SiO₂/Si substrates. Using the impedance spectroscopy technique, it has been suggested that the high dielectric constant response of the CCTO thin films originates from the grain boundary layer mechanism as found in internal barrier layer capacitors. PACS 77.55.+f; 81.15.Fg; 68.55.-a     

Ferroelectric and dielectric properties of SrBi<Subscript>4</Subscript>Ti<Subscript>4</Subscript>O<Subscript>15</Subscript> thin films grown on Bi<Subscript>4</Subscript>Ti<Subscript>3</Subscript>O<Subscript>12</Subscript> film layer

Ferroelectric and dielectric properties of bilayered ferroelectric thin films, SrBi₄Ti₄O₁₅ grown on Bi₄Ti₃O₁₂, were investigated. The thin films were annealed at 700°C under oxygen atmosphere. The bilayered thin films were prepared on a Pt(111)/Ti/SiO₂/Si substrate by a chemical solution deposition method. The dielectric constant and dielectric loss of the bilayered thin films were 645 and 0.09, respectively, at 100 kHz. The value of remnant polarization (2P _r) measured from the ferroelectric thin film capacitors was 60.5 μC/cm² at electric field of 200 kV/cm. The remnant polarization was reduced by 22% of the initial value after 10¹⁰ switching cycles. The results showed that the ferroelectric and dielectric properties of the SrBi₄Ti₄O₁₅ on Bi₄Ti₃O₁₂ ferroelectric thin films were better than those of the SrBi₄Ti₄O₁₅ grown on a Pt-coated Si substrate suggesting that the improved properties may be due to the different nucleation and growth kinetics of SrBi₄Ti₄O₁₅ on the c-axis-oriented Bi₄Ti₃O₁₂ layer or on the Pt-coated Si substrate.     

Ag/Bi4Ti3O12栅n沟道铁电场效应晶体管制备及存储特性

在溶胶-凝胶工艺获得高质量Bi₄Ti₃O₁₂薄膜的基础上 ，制备了Ag/Bi₄Ti₃O₁₂栅n沟道铁电场效应晶体管. 研 究了Si基Bi₄Ti₃O₁₂薄膜的生长特性及其对铁电薄膜/ 硅的界面状态和铁电场效应晶体管存储特性的影响. 研究表明，在合理的工艺条件下可以获 得具有较高c-轴择优取向的纯钙钛矿相Si基Bi₄Ti₃O₁₂ 铁电薄膜并有利于改善Bi₄Ti₃O₁₂/Si之间的界面特性; 顺时针回滞的C-V特性曲线和C-T曲线表明Ag/Bi₄Ti₃O_{12栅n沟道铁电场效应晶体管具有极化存储效应和一定的极化电荷保持能力; 器件的转移(I< sub>sd}-V_G)特性曲线显示Ag/Bi₄Ti₃O_{12栅n沟道铁电场效应晶体管具有明显的栅极化调制效应. 关键词： 铁电场效应晶体管 4}Ti₃O₁₂')" href="#">Bi₄Ti₃O₁₂ 存储 特性 溶胶-凝胶工艺     

Effect of substitution of vanadium on the structure and electrical properties of Bi<Subscript>3.25</Subscript>La<Subscript>0.75</Subscript>Ti<Subscript>3</Subscript>O<Subscript>12</Subscript> thin films

The ferroelectric and dielectric properties of Bi_4-xLa_xTi₃O₁₂ (BLT) and Bi_4-xLa_xTi_2.97V_0.03O₁₂ (BLTV) thin films deposited on (111)Pt/Ti/SiO₂/Si substrates using a chemical solution method were investigated. The BLTV thin films showed a larger remanent polarization (9.6 C/cm²) than the BLT thin films (6.5 C/cm²), while the coercive field for both thin films was nearly the same. The capacitance of the films as a function of a small ac driving field was measured, and the data were processed using Rayleighs law. The results show that the Rayleigh constant of the BLT films was smaller than that of the BLTV films, indicating that the defect concentration was lower in the latter case. The superior ferroelectricity of the BLTV films was attributed to a decrease of both the (001) orientation and the defect concentration. PACS 77.80.Bh; 77.55.+f