All-cellulose composites from unbleached hardwood kraft pulp reinforced with nanofibrillated cellulose

In the present work, nanofibrillated cellulose (NFC) from bleached eucalyptus pulp was prepared, characterized and used as reinforcement in an unbleached eucalyptus fiber matrix. First, the NFC was fabricated through TEMPO-mediated oxidation and characterized for the degree of polymerization, water retention value, cationic demand and carboxyl content. Intrinsic mechanical properties were also calculated by applying the rule of mixtures, which determines the coupling (f _c) and efficiency factor (η _e) of cellulose nanofibrils within the matrix. The results showed that the average intrinsic tensile strength and Young’s modulus of NFC are estimated to be 6,919 MPa and 161 GPa, respectively. After characterization, the NFC was used as reinforcement in the preparation of biocomposites in the form of paper handsheets, which were physically and mechanically analyzed. The presence of NFC induced an increase in the density of biocomposites and significant enhancement of the mechanical properties as well as an important reduction in porosity. Finally, f _c and η _e were determined from the mean intrinsic properties.     

Silver nanoparticle‐decorated multiwalled carbon nanotube/pramipexole nanocomposite: Synthesis,characterization and application as an antibacterial agent

This work reports the preparation of multiwalled carbon nanotube/pramipexole/Ag (CNT/pra/Ag) as a novel antibacterial agent, in which pramipexole groups are utilized as linkers to secure Ag nanoparticles to carbon nanotube surfaces without agglomeration. The resulting CNT/pra/Ag sample was characterized by performing transmission and scanning electron microscopy, wavelength‐ and energy‐dispersive X‐ray, X‐ray diffraction, Fourier transform infrared, inductively coupled plasma and Raman measurements. Using this approach, monodisperse spherical Ag nanoparticles in CNT/pra/Ag have narrow size distributions with average diameters of ca 3–8 nm. The antibacterial activity of CNT/pra/Ag was investigated against bacterial species Staphylococcus aureus , methicillin‐resistant S. aureus , Pseudomonas aeruginosa and Escherichia coli using the paper‐disc diffusion method and by determining the minimal inhibitory concentration. CNT/pra/Ag showed better inhibitory activity towards Gram‐positive bacteria than Gram‐negative bacteria in this study, which indicates its potential as an antibacterial material for laboratory and medical purposes.     

Comparison of multilayer formation between different cellulose nanofibrils and cationic polymers

The multilayer formation between polyelectrolytes of opposite charge offers possibility for creating new tailored materials. Exchanging one or both components for charged nanofibrillated cellulose (NFC) further increases the variety of achievable properties. We explored this by introducing unmodified, low charged NFC and high charged TEMPO-oxidized NFC. Systematic evaluation of the effect of both NFC charge and properties of cationic polyelectrolytes on the structure of the multilayers was performed. As the cationic component cationic NFC was compared with two different cationic polyelectrolytes, poly(dimethyldiallylammoniumchloride) and cationic starch. Quartz crystal microbalance with dissipation (QCM-D) was used to monitor the multilayer formation and AFM colloidal probe microscopy (CPM) was further applied to probe surface interactions in order to gain information about fundamental interactions and layer properties. Generally, the results verified the characteristic multilayer formation between NFC of different charge and how the properties of formed multilayers can be tuned. However, the strong nonelectrostatic affinity between cellulosic fibrils was observed. CPM measurements revealed monotonically repulsive forces, which were in good correspondence with the QCM-D observations. Significant increase in adhesive forces was detected between the swollen high charged NFC.     

Pistacia atlantica leaf extract mediated synthesis of silver nanoparticles and their antioxidant,cytotoxicity, and antibacterial effects under in vitro condition

Recently, researchers have investigated the therapeutical properties of metal nanoparticles especially silver nanoparticles in vitro and in vivo conditions. The aim of the experiment was green synthesis and chemical characterization of silver nanoparticles from aqueous extract of Pistacia atlantica leaf (Ag NPs) and evaluation of their cytotoxicity, antioxidant, and antibacterial effects under in vitro condition. Ag NPs were spherical with a size range of 40-60 nm and characterized using various analysis techniques including UV–Vis absorption spectroscopy to determine the presence of Ag NP in the solution. We studied functional groups of Pistacia atlantica extract in the reduction and capping process of Ag NP by FT-IR, crystallinity and FCC planes by XRD pattern, elemental analysis of the sample by EDS, and surface morphology, shapes, and size of Ag NPs by SEM, AFM, and TEM. Destroy initiation and termination temperatures of the Ag NPs were determined by TGA. DPPH free radical scavenging test was done to evaluate the antioxidant potentials, which indicated similar antioxidant potentials for Ag NPs and butylated hydroxytoluene. The synthesized Ag NPs had great cell viability dose-dependently and indicated this method was nontoxic. Agar diffusion tests were done to determine the antibacterial characteristic. Ag NPs revealed similar antibacterial property to the standard antibiotic. Also, Ag NPs prevented the growth of all bacteria at 1-7 μg/ml concentrations and removed them at 3-15 μg/ml concentrations. Finally, synthesized Ag NPs revealed non-cytotoxicity, antioxidant and antibacterial activities in a dose-depended manner.     

P(4-VP) based nanoparticles and composites with dual action as antimicrobial materials

Polymeric 4-VP (p(4-VP)) particles were synthesized in an oil-in-water microemulsion system using various amounts of ethylene glycol dimethacrylate (EGDMA) as crosslinker. The prepared p(4-VP) particles were chemically modified to obtain positively charged particles as polyelectrolytes. Furthermore, these p(4-VP) particles were used for in situ Ag and Cu metal nanoparticle syntheses to provide dual action with an additional advantage as bactericidal particles. The synthesized p(4-VP) particles with positive charges and metal constituents were tested for potential antibacterial action against various bacteria such as Staphylococcus aureus ATCC6538, Pseduomonas aeruginosa ATCC9027, Bacillus subtilis ATCC6633, Escherichia coli ATCC8739. It was found that p(4-VP) particles, especially the positively charged forms had potential as antibacterial materials. The synthesized particle dimensions were characterized with TEM, and DLS measurements. Chemical modification of the particles was confirmed by FT-IR spectroscopy and zeta potential measurements, and the metal nanoparticle contents were determined with thermogravimetric (TGA) studies.     

Antibacterial thermoplastic polyurethane electrospun fiber mats prepared by 3-aminopropyltriethoxysilane-assisted adsorption of Ag nanoparticles

Antibacterial thermoplastic polyurethane(TPU) electrospun fiber mats were prepared by adsorption of Ag nanoparticles(Ag NPs) onto TPU/3-aminopropyltriethoxysilane(APS) co-electrospun fiber mats from silver sol. The use of APS can functionalize TPU fibers with amino groups, facilitating the adsorption of Ag NPs. The effects of p H of silver sol and APS content on Ag NP adsorption and antibacterial activity were investigated. Ag NP adsorption was evidenced by TEM, XPS and TGA. Significant Ag NP adsorption occurred at p H = 3-5. The main driving force for Ag NP adsorption is electrostatic interaction between ―NH3~+ of the fibers and ―COO-derived from the ―COOH group capped on the surfaces of Ag NPs. The antibacterial activity of the Ag NP-decorated TPU/APS fiber mats was investigated using both gram-negative Escherichia coli and gram-positive Bacillus subtilis. The antibacterial rate increases with increasing APS content up to 5% where the antibacterial rates against both types of bacteria are over 99.9%.     

Stability enhancement of nanofibrillated cellulose in electrolytes through grafting of 2-acrylamido-2-methylpropane sulfonic acid

This study aimed to improve the stability of nanofibrillated cellulose (NFC) in an electrolyte containing system, which was achieved by the grafting of 2-acrylamido-2-methylpropane sulfonic acid (AMPS) via the ceric ammonium nitrate-induced polymerization process. The results indicated that upon grafting the salt resistance and thermal stability of NFC were significantly improved. Moreover, the stability of the modified NFC increased with the AMPS loading. Compared to the control (the original NFC), the poly-AMPS/NFC (357.5 mg/g AMPS) exhibited much improved stability in a 400 mmol/L NaCl solution, and its viscosity was 350 mPa s. The thermogravimetric analysis results showed that the initial decomposition temperature of the modified NFC increased from 265 to 330 °C. Transmission electron microscopy (TEM) observations showed that the main morphologic features of NFC were not altered, suggesting that the grafting reaction occurred on the fiber surface. The modified NFC can have promising industrial applications, such as oil recovery.     

Surface modification of oxidized cellulose haemostat by argon plasma treatment

In this paper we focused on cold plasma treatment of oxidized cellulose haemostat. Oxidized cellulose was modified in inert argon plasma. The changes of surface composition were examined by XPS and FTIR. Surface morphology of fibres was studied by SEM. Gravimetry was used to study ablation and water absorption. Antibacterial effect of pristine and plasma treated samples was examined by growth of Escherichia coli and Staphylococcus epidermidis. Behaviour of pristine and plasma treated samples in water, physiological saline solution and phosphate buffered saline was observed by changes in the pH of their solutions. Modification of oxidized cellulose by inert argon plasma caused significant changes in the chemical composition of its surface layers as well as changes in morphology of those layers while maintaining or improving the antibacterial properties. We found out that modification by inert argon plasma improves the properties necessary for haemostatic function of oxidized cellulose.     

Modular Architecture of Protein Binding Units for Designing Properties of Cellulose Nanomaterials

Molecular biomimetic models suggest that proteins in the soft matrix of nanocomposites have a multimodular architecture. Engineered proteins were used together with nanofibrillated cellulose (NFC) to show how this type of architecture leads to function. The proteins consist of two cellulose‐binding modules (CBM) separated by 12‐, 24‐, or 48‐mer linkers. Engineering the linkers has a considerable effects on the interaction between protein and NFC in both wet colloidal state and a dry film. The protein optionally incorporates a multimerizing hydrophobin (HFB) domain connected by another linker. The modular structure explains effects in the hydrated gel state, as well as the deformation of composite materials through stress distribution and crosslinking. Based on this work, strategies can be suggested for tuning the mechanical properties of materials through the coupling of protein modules and their interlinking architectures.     

Green rapid synthesis of Cu2O/Ag heterojunctions exerting synergistic antibiosis

Semiconductor-noble metal composite has become a research focus due to its superior performance compared with its respective component. Although various methods have been developed to synthesize semiconductor-noble metal heterostructures, most of them are relatively complex multistep and use toxic reactants of high cost and risk. In this work, a series of Cu₂O/Ag heterojunctions were quickly prepared in one step via simple microwave-assisted green route. XRD, SEM, TEM, EDS, XPS, etc. ...     

Topochemical acetylation of cellulose nanopaper structures for biocomposites: mechanisms for reduced water vapour sorption

Moisture sorption decreases dimensional stability and mechanical properties of polymer matrix biocomposites based on plant fibers. Cellulose nanofiber reinforcement may offer advantages in this respect. Here, wood-based nanofibrillated cellulose (NFC) and bacterial cellulose (BC) nanopaper structures, with different specific surface area (SSA), ranging from 0.03 to 173.3 m²/g, were topochemically acetylated and characterized by ATR-FTIR, XRD, solid-state CP/MAS ¹³C-NMR and moisture sorption studies. Polymer matrix nanocomposites based on NFC were also prepared as demonstrators. The surface degree of substitution (surface-DS) of the acetylated cellulose nanofibers is a key parameter, which increased with increasing SSA. Successful topochemical acetylation was confirmed and significantly reduced the moisture sorption in nanopaper structures, especially at RH = 53 %. BC nanopaper sorbed less moisture than the NFC counterpart, and mechanisms are discussed. Topochemical NFC nanopaper acetylation can be used to prepare moisture-stable nanocellulose biocomposites.     

In situ formed silver nanoparticles on glass fibers grafted with polyacrylamide and their antibacterial activity

In this paper, grafted polyacrylamide from the surface of glass fibers was prepared by surface initiated atom transfer radical polymerization in order to control the matrix surface structure and properties. The uniform and stable grafted polymer layer was utilized to prepare silver ions complexes, and then the silver ions were reduced by AlLiH₄ to form in situ silver nanoparticles. The structure, composition, properties and surface morphology of the modified glass fibers were characterized by X-ray photoelectron spectroscopy, fourier transform infrared spectroscopy, thermo gravimetric analysis and scanning electron microscopy. The antibacterial activities of modified glass fibers against E. coli, B. subtilis and S. cerevisiae had been studied respectively by Shake Flask Method. The results show that the antibacterial ratio of Ag nanoparticles loaded glass fibers is significantly improved than that of Ag⁺ loaded, and the highest antibacterial ratio is 72.2% against E. coli.     

Phytochemical fabrication,characterization, and antioxidant application of copper and cobalt oxides nanoparticles using <Emphasis Type="Italic">Sesbania sesban</Emphasis> plant

In this work, an ecofriendly and economic strategy for synthesize of CuO and Co₃O₄ were developed using extracted Sesbania sesban solution (ESS) as a reducing and stabilizing agent, and bioreactor. These novel nano metal oxides (NMOs) were characterized by high-resolution-transmission electron microscopy (TEM), EDAX thermo gravimetric analysis and X-ray diffraction (XRD). Morphology and size of them were investigated by TEM and the average sizes of for spherical CuO and Co₃O₄ nanoparticles are 20–40 and 15–30 nm, respectively. The XRD and EDAX confirmed the high purity for NMOs. The thermal behaviors of the NMOs exhibited good crystallographic stability within the investigated temperature range. The antioxidant and antibacterial activities of NMOs were investigated and compared to manganese(III) meso-tetraphenylporphyrin complex/Ag nanocomposite (Ag/P nanocomposite) synthesizing by ESS. The results obtained from this work showed that copper(II) oxide, cobalt oxide nanoparticles, and Ag/P nanocomposite have DPPH scavenging activity. On the other hand, NMOs have no antibacterial activity against Gram-negative bacterial strains. Cobalt oxide nanoparticles have antibacterial activity against Staphylococcus aureus, while Ag/P nanocomposite showed the antibacterial activities against both Gram-negative and Gram-positive bacterial strains.     

Interactions between inorganic nanoparticles and cellulose nanofibrils

Nanofibrillated cellulose (NFC) is increasingly utilized in materials and biomedical applications consequently increasing interest in the modification of its surface properties. Besides modification using polyelectrolytes and polysaccharides, NFC can be combined with solid particles enabling formation of fibril network loaded with particles. Use of particles enabling easy functionalization could be beneficial for the development of hybrid structures, and lead to preparation of nanocomposites and functional materials. In order to explore interactions related to preparation of such structures, the interactions between nanosized precipitated calcium carbonate (nanoPCC) and nanoclay particles and NFC were examined by observing adsorption of the particles on NFC substrate using a quartz crystal microbalance with dissipation monitoring (QCM-D) and atomic force microscopy (AFM) imaging. By a treatment with carboxymethylated cellulose (CMC), the anionicity of the NFC substrate could be increased, providing an additional tool to affect the interplay between NFC and the inorganic particles. For slightly cationic nanoPCC particles an increase in the anionicity of the NFC by the CMC treatment increased the affinity, while the opposite was true for anionic nanoclay. Additionally, for interactions between nanoclay and NFC, dispersion stability was an important factor. QCM-D was successfully used to examine the adsorption characteristics of nanoparticles although the technique is commonly used to study the adsorption of thin polymer layers. Distinct adsorption characteristics were observed depending on the nanoparticle used; nanoclay particles deposited as a thin layer, whereas nanoPCC particles formed clusters.     

The role of MFC/NFC swelling in the rheological behavior and dewatering of high consistency furnishes

The influence of swelling on the rheological and dewatering properties of high consistency nanocellulose based furnishes is considered. Different consistencies of suspensions (1–4 %) and furnishes (5–15 %) were prepared made of two distinctly different grades of nanocellulose containing, micro fibrillated (MFC) and nanofibrillated (NFC) cellulose, and systematic comparison between the rheological and dewatering parameters was conducted. The characterization of the rheological and dewatering properties was performed with a stress controlled rheometer combined with an immobilization cell in parallel plate geometry, as well as with an independent gravimetric dewatering device. The surface charge of nanofibrillated cellulose was found to influence the rheological and dewatering properties of the evaluated suspensions and furnishes due to its impact on swelling and effectively bound water. Due to the complex behavior of the novel materials, the immobilization times were difficult to determine from the changes in the damping factor, as often used for coating colors. Instead, we propose a modified method for determination of immobilization times based on a rheological analysis adopting the rate of change in viscoelastic loss factor over time, d(tan δ = G′′/G′)/dt, describing the critical point(s) in the ratio of the viscous to elastic stress response moduli. With this approach we show that it is possible to characterize immobilization of these materials incorporating the concept of the combined physical interactions of the components and the non-removable bound water, without requiring a direct measure of the nanocellulose surface swelling. Based on the results, we hypothesize that fibrillar swelling impacts the dewatering of MFC and NFC suspensions, and furnishes containing them, by an interfiber pore connectivity blocking/sealing mechanism, which effectively defines the immobilization of the material matrix at the end point of free water extraction caused by the physical blocking imposed by the remaining bound water.     

In Situ Synthesis of Silver Nanoparticles for Ag‐NP/Cotton Nanocomposite and Its Bactericidal Effect

For years, nanotechnology has been considered as an important field that has opened new opportunities for extensive research. In biomedical applications, of all the metal nanoparticles, silver nanoparticles (Ag‐NPs) have played an important role because of their antibacterial properties. Ag‐NPs have been demonstrated to possess antibacterial properties in many applications. However, the minimum number of NPs required on the surface to prevent bacterial growth is yet to be determined. It is worthwhile studying the decrease of bacterial growth rate or the level of inhibition as a function of the size or density of NPs. Therefore, in this paper we discuss the size of the NPs that can stimulate the bactericidal property. It should also be noted that NPs larger than 100 nm might not be effective against bacteria. Moreover, this study employs polyvinyl pyrrolidone (PVP) and cellulose as reductants to form strong covalent bonds under UV light, which can help synthesize Ag‐NP/cotton nanocomposites. This type of nanocomposite displays high cell viability and improved antimicrobial activity. A fairly simple application involves the use of UV light to increase particle distribution and impart bactericidal property.     

All-cellulose multilayers: long nanofibrils assembled with short nanocrystals

Self-organized multilayer films were formed by sequential addition of oppositely charged cellulose I nanoparticles. The all-cellulosic multilayers were prepared via adsorption of cationicially modified cellulose nanofibrils (cat NFC) and anionic short crystalline cellulose (CNC) at pH 4.5 and pH 8.3. The properties and build-up behavior of layer-by-layer-constructed films were studied with microgravimetry (QCM-D) and the direct surface forces in these systems were explored with colloidal probe microscopy to gain information about the fundamental interplay between cat NFC and anionic CNC. The importance of the first layer on the adsorption of the consecutive layers was demonstrated by comparing pure in situ adsorption in the QCM-D with multilayer films made by spin coating the first cationic NFC layer and then subsequently adsorbing the following layers in situ in the QCM-D chamber. Differences in adsorbed amount and viscoelastic behavior were observed between those two systems. In addition, a significant pH dependence of cat NFC charge was found for both direct surface interactions and layer properties. Moreover the underlying cellulose layer in multilayer film was established to influence the surface forces especially at lower pH, where the cat NFC chains extensions were facilitated and overall charge was affected by the cationic counterpart within the layers. This enhanced understanding the effect of charge and structure on the interaction between these renewable nanoparticles is valuable when designing novel materials based on nanocellulose.     

Liquid ammonia treatment of (cationic) nanofibrillated cellulose/vermiculite composites

Liquid ammonia was used to treat films of nanofibrillated cellulose (NFC), trimethylammonium-modified NFC (TMA-NFC), and their composites with vermiculite. Crystal structure, mechanical properties, water vapor permeation and water vapor adsorption of the resulting materials were investigated. Upon treatment, the crystal structure of (TMA-)NFC both in presence and absence of vermiculite changed from cellulose I to III. With the exception of TMA-NFC/vermiculite composites, pronounced effects on the addressed mechanical properties arose after exposure of the materials to ammonia. Furthermore, treatment of composite films with ammonia led to a distinct decrease in water vapor permeation. Remarkably, TMA-NFC/vermiculite composites films show the best water vapor barrier properties, highest tensile strength and highest elastic modulus after treatment with liquid ammonia. This is regarded to be at least partially a consequence of electrostatic attraction between the positively charged ammonium groups in TMA-NFC and the anionic silicate layers of vermiculite. © 2013 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2013     

Synthesis and antibacterial activity of Ag/CeO<Subscript>2</Subscript> hybrid architectures

Flower-like ceria (CeO₂) architectures consisting of well aligned nanosheets were first synthesized by a glycol solvothermal method. The size of CeO₂ architectures is about 5?μm in width and 10?μm in length, with the nanosheets thickness below 100?nm. Subsequently, the adsorbed Ag ions on the surface of CeO₂ were in situ reduced to form Ag nanoparticles (NPs), leading to the fabrication of Ag/CeO₂ hybrid architectures (HAs). The formed Ag NPs with sizes of 20–40?nm were uniformly loaded on the surface of the CeO₂ sheets. The antibacterial properties of Ag/CeO₂ HAs against Gram-negative E. coli and Gram-positive S. aureus were evaluated by minimum inhibitory concentration (MIC), minimum bactericidal concentration (MBC), and a filter paper inhibition zone method. The results demonstrated that Ag/CeO₂ HAs displayed excellent antibacterial activity toward S. aureus and E. coli, which were attributed to the synergistic antibacterial effect between Ag NPs and CeO₂ in HAs_. Here, CeO₂ nanoflowers as a new substrate could restrict Ag NPs aggregations and improve their antibacterial activities. Therefore, the resulted Ag/CeO₂ HAs would be considered as a promising antibacterial agent.

Open image in new window

     

Enhanced Conductivity and Antibacterial Behavior of Cotton via the Electroless Deposition of Silver

In this study, the surface-initiated atom transfer radical polymerization (SI-ATRP) technique and electroless deposition of silver (Ag) were used to prepare a novel multi-functional cotton (Cotton-Ag), possessing both conductive and antibacterial behaviors. It was found that the optimal electroless deposition time was 20 min for a weight gain of 40.4%. The physical and chemical properties of Cotton-Ag were investigated. It was found that Cotton-Ag was conductive and showed much lower electrical resistance, compared to the pristine cotton. The antibacterial properties of Cotton-Ag were also explored, and high antibacterial activity against both Escherichia coli and Staphylococcus aureus was observed.