Synthesis and characterization of poly(L‐lactide)s and poly(D‐lactide)s of controlled molecular weight

High molecular weight poly(L ‐lactide)s (PLLAs) and poly(D ‐lactide)s (PDLAs) were synthesized in toluene at 70 °C by ring‐opening polymerization of optically pure L ‐lactide and D ‐lactide, using tin(II) 2‐ethylhexanoate (SnOct₂) and 2‐(2‐methoxyethoxy)ethanol as initiator and coinitiator, respectively. Under these conditions, polarimetry as well as ¹³C NMR spectroscopy indicated that the synthesized poly(lactide)s (PLAs) are more than 99% isotactic. The molecular weight was successfully controlled by adjusting the monomer‐to‐initiator molar ratio. Gel permeation chromatography and MALDI‐TOF mass spectrometry analyses showed that the polydispersity index of the PLAs is below 1.1. Moreover, MALDI‐TOF spectra showed two different chain distributions, one characterized by an even number of lactic acid repeat units and the other by an odd number of lactic acid repeat units. The second distribution, indicative of the presence of intermolecular transesterification reactions, appears at the very beginning of the polymerization and its intensity increases with the polymerization time. Finally, a reversible reaction kinetic model was used to determine the monomer equilibrium concentration ([M]_eq = 1.4 ± 0.5%) and the propagation rate constant (k_p = 14.4 ± 0.5 L mol^?1 h^?1) of the polymerization. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 1944–1955, 2007     

Stable dispersions of hybrid nanoparticles induced by stereocomplexation between enantiomeric poly(lactide) star polymers

We report the formation and characterization of stable dispersions of hybrid nanoparticles in solution formed via stereocomplexation of enantiomeric poly(lactide) hybrid star polymers. The hybrid starlike polymers, having polyhedral oligomeric silsesquioxane (POSS) nanocages as the core and either poly(L-lactide) (PLLA) or poly(D-lactide) (PDLA) as the arms, are synthesized via ring-opening polymerization of lactide using octafunctional POSS as the macroinitiator. In the solid state, differential scanning calorimetry and wide-angle X-ray scattering measurements confirmed the formation of the stereocomplex in the mixture of POSS-star-PLLA and POSS-star-PDLA (50:50, wt %). In a solution of the same mixture in tetrahydrofuran (THF), sterocomplexation leads to formation of hybrid nanaoparticles. Detailed accounts of the nanoparticle formation and influence of aging and concentration have been presented. It was observed that at low concentration the stereocomplexed nanaoparticles remain stable over 45 days and are not sensitive to dilution, suggesting the formation of a stable hybrid nanoparticle dispersion in solution. In contrast, the aggregates of the individual POSS-star-PLLA or POSS-star-PDLA in THF, formed via weak solvophobic interactions, tended to disintegrate into smaller aggregates on dilution. Exploiting the PLLA-PDLA stereocomplexation with an appropriate molecular design can be a versatile route to develop stable organic/inorganic hybrid nanoparticle dispersions.     

Electrochemistry of surface-grafted stimulus-responsive monolayers of poly(ferrocenyldimethylsilane) on gold

Poly(ferrocenyldimethylsilane)s with various degrees of polymerization and featuring a thiol end group were chemically end-grafted onto gold substrates by self-assembly, forming redox-active monolayers. The monolayers were characterized by contact angle measurements, Fourier transform infrared spectroscopy, and X-ray photoelectron spectroscopy. Layer thickness values were determined by surface plasmon resonance spectroscopy and ellipsometry. The electrochemical properties of these films in aqueous NaClO(4) were studied using cyclic voltammetry (CV), differential pulse voltammetry, chronoamperometry, and chronocoulometry. Cyclic voltammograms showed two reversible redox peaks, indicating a stepwise oxidation of the electroactive sites. The first oxidation step showed reversible behavior at low scan rates and quasi-reversible behavior at higher scan rates. Peak currents (i(p)) plotted against the square root of scan rates (v(1/2)) for the first oxidation peak and for the corresponding reduction peak exhibited a linear dependence, indicating that the oxidation process in the first step is controlled by the diffusion of counterions into the polymer film. For the second oxidation peak and the corresponding reduction peak, i(p) varied linearly with v. This redox behavior is characteristic of surface-immobilized electroactive layers. The higher reversibility of the second oxidation and reduction waves in the CV experiments was explained from the solvation of the surface-grafted poly(ferrocenylsilane) (PFS) chains, which depends on the degree of oxidation. Oxidized PFS films are swollen in the aqueous electrolyte solutions, leading to a higher segmental mobility of the polymer chains and a much increased counterion mobility within the film. Kinetic parameters for the redox processes were obtained from chronocoulometry experiments.     

Resorbable materials of poly(L-lactide)

Poly(L-lactide) PLLA materials with various porosity in the range of 5 to 300 Μm were produced by crystallization of the polymer in presence of low molecular weight additives from solution in good solvents, followed by the diluent extraction. For the concentration of diluent in PLLA in the range of 10 to 50 per cent by weight, the pore size increased with increasing concentration of additive, while the additive was easily extracted from the polymer. For the concentration of additive in PLLA in the range of 60 to 80 per cent by weight, the pore size increased or/and decreased with increasing concentration of the additive, while the latter was hardly extractable from the polymer. Porous, resorbable tubes or rods of various diameter well accepted by living organism were produced by this method. Tracheal prostheses, pins or porous reservoirs made from PLLA or modified porous PLLA could be some of many potential application of these materials.     

A new class of biodegradable hydrogels stereocomplexed by enantiomeric oligo(lactide) side chains of poly(HEMA‐g‐OLA)s

Two enantiomeric amphiphilic graft copolymers consisting of water soluble poly(2‐hydroxyethyl methacrylate) (HEMA) and biodegradable oligo(L ‐lactide) (OLLA) or oligo(D ‐lactide) (ODLA) were synthesized by free radical copolymerization. HEMA‐OL(D)LA macromonomers were synthesized by ring opening polymerization of L ‐ or D ‐lactide. Both HEMA‐OLA macromonomers and graft copolymers were characterized by NMR spectroscopy and gel permeation chromatography. Graft copolymers and their stereocomplexes were analyzed by wide angle X‐ray diffraction and differential scanning calorimetry (DSC). Due to the formation of stereocomplex crosslinks between poly(HEMA) main chains, amphiphilic, biodegradable hydrogels prepared by blending of two enantiomeric poly(HEMA‐g‐OLLA) and poly(HEMA‐g‐ODLA) degraded more slowly in phosphate buffered saline than individual optically pure poly‐(HEMA‐g‐OL(D)LA).     

Porous thin films based on photo-cross-linked star-shaped poly(D,L-lactide)s

Self-assembly processes and subsequent photo-cross-linking were used to generate cross-linked, ordered microporous structures on the surfaces of well defined four-arm star-shaped poly(D,L-lactide) (PDLLA) thin films. The four-arm star-shaped PDLLAs were synthesized using an ethoxylated pentaerythritol initiator. Solutions of the PDLLAs were cast in a humid environment, and upon solvent evaporation, ordered honeycomb structures (or breath figures) were obtained. Correlations between molar mass, polymer solution viscosity, and pore dimensions were established. The average pore dimension decreased with increasing polymer solution concentration, and a linear relationship was observed between relative humidity and average pore dimensions. Highly ordered microporous structures were also developed on four-arm star-shaped methacrylate-modified PDLLA (PDLLA-UM) thin films. Subsequent photo-cross-linking resulted in more stable PDLLA porous films. The photo-cross-linked films were insoluble, and the honeycomb structures were retained despite solvent exposure. Free-standing, structured PDLLA-UM thin films were obtained upon drying for 24 h. Ordered microporous films based on biocompatible and biodegradable polymers, such as PDLLA, offer potential applications in biosensing and biomedical applications.     

Linear and four‐armed poly(l‐lactide)‐block‐poly(d‐lactide) copolymers and their stereocomplexation with poly(lactide)s

Linear and four‐armed poly(l ‐lactide)‐block‐poly(d ‐lactide) (PLLA‐b‐PDLA) block copolymers are synthesized by ring‐opening polymerization of d ‐lactide on the end hydroxyl of linear and four‐armed PLLA prepolymers. DSC results indicate that the melting temperature and melting enthalpies of poly (lactide) stereocomplex in the copolymers are obviously lower than corresponding linear and four‐armed PLLA/PDLA blends. Compared with the four‐armed PLLA‐b‐PDLA copolymer, the similar linear PLLA‐b‐PDLA shows higher melting temperature (212.3 °C) and larger melting enthalpy (70.6 J g^?1). After these copolymers blend with additional neat PLAs, DSC, and WAXD results show that the stereocomplex formation between free PLA molecular chain and enantiomeric PLA block is the major stereocomplex formation. In the linear copolymer/linear PLA blends, the stereocomplex crystallites (sc) as well as homochiral crystallites (hc) form in the copolymer/PLA cast films. However, in the four‐armed copolymer/linear PLA blends, both sc and hc develop in the four‐armed PLLA‐b‐PDLA/PDLA specimen, which means that the stereocomplexation mainly forms between free PDLA molecule and the inside PLLA block, and the outside PDLA block could form some microcrystallites. Although the melting enthalpies of stereocomplexes in the blends are smaller than that of neat copolymers, only two‐thirds of the molecular chains participate in the stereocomplex formation, and the crystallization efficiency strengthens. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2014 , 52, 1560–1567     

Electrospun chitosan-coated fibers of poly(L-lactide) and poly(L-lactide)/poly(ethylene glycol): preparation and characterization

Fibrous poly(L-lactide) (PLLA) and bicomponent PLLA/poly(ethylene glycol) mats were prepared by electrospinning and then were coated with chitosan. The presence of chitosan coating was proved by scanning electron microscopy and by fluorescence microscopy. On contact with blood, the chitosan coating led to changes in erythrocyte shape and in their aggregation. The haemostatic activity of the mats increased with increasing chitosan content. Microbiological studies against Staphylococcus aureus revealed that the chitosan coating imparts antibacterial activity to the hybrid mats. The combined haemostatic and antibacterial activities render these novel materials suitable for wound-healing applications.     

Chemical upcycling of poly(lactide) plastic waste to lactate ester,lactide and new poly(lactide) under Mg-catalysis condition

Chemical upcycling of end-of-life poly(lactide) plastics to lactide, lactate ester and new poly(lactide) has been achieved by using magnesium bis[bis(trimethylsilyl)amide] [Mg(HMDS)₂] as promoter. Mg(HMDS)₂ showed high efficiency in l-lactide polymerization and poly(lactide) depolymerization. Mg(HMDS)₂/Ph₂CHOH catalytic system displayed high ring-opening selectivity and the characteristic of immortal polymerization. Taking advantage of transesterification, depolymerizations of end-of-life poly(lactide) plastics to lactate ester (polymer to value-added chemicals) and lactide (polymer to monomer) were achieved with high yields. Besides, a new “depolymerization-repolymerization” strategy was proposed to directly transform poly(lactide) into new poly(lactide). This work provides a theoretical basis for the design of polymerization and depolymerization catalysts and promotes the development of degradable polymers.     

Synthesis and characterization of poly(ethylene glycol) grafted poly(L-lactide)

Poly(ethylene glycol) grafted poly(L -lactide) was prepared by ring opening polymerization of L -lactide and epoxy-terminated poly(ethylene glycol) methyl ether (PEGME). Stannous octoate and Al(Et)₃·0.5 H₂O were tested as polymerization catalysts, and Al(Et)₃·0.5 H₂O was found to be more effective for the ring-opening of the epoxy group of the modified PEGME monomer. The synthesized polymers were characterized by NMR and the efficiency of the incorporation of epoxy-terminated PEGME in the copolymer was determined.     

Enzymatic degradation of poly(L-lactide) and poly(epsilon-caprolactone) electrospun fibers

Poly(L-lactide) (PLLA) and poly(epsilon-caprolactone) (PCL) ultrafine fibers were prepared by electrospinning. The influence of cationic and anionic surfactants on their enzymatic degradation behavior was investigated by measuring weight loss, molecular weight, crystallinity, and melting temperature of the fibers as a function of degradation time. Under the catalysis of proteinase K, the PLLA fibers containing the anionic surfactant sodium docecyl sulfate (SDS) exhibited a faster degradation rate than those containing cationic surfactant triethylbenzylammonium chloride (TEBAC), indicating that surface electric charge on the fibers is a critical factor for an enzymatic degradation. Similarly, TEBAC-containing PCL fibers exhibited a 47% weight loss within 8.5 h whereas SDS-containing PCL fibers showed little degradation in the presence of lipase PS. By analyzing the charge status of proteinase K and lipase PS under the experimental conditions, the importance of the surface charges of the fibers and their interactions with the charges on the enzymes were revealed. Consequently, a "two-step" degradation mechanism was proposed: (1) the enzyme approaches the fiber surface; (2) the enzyme initiates hydrolysis of the polymer. By means of differential scanning calorimetry and wide-angle X-ray diffraction, the crystallinity and orientation changes in the PLLA and PCL fibers during the enzymatic degradation were investigated, respectively.     

Effect of stereocomplex formation between enantiomeric poly(l,l-lactide) and poly(d,d-lactide) blocks on self-organization of amphiphilic poly(lactide)-block-poly(ethylene oxide) copolymers in dilute aqueous solution

The effect of crystallization of a hydrophobic poly(lactide) block on the self-organization of biocompatible and biodegradable amphiphilic poly(lactide)-block-poly(ethylene oxide) (PLA-b-PEO) copolymers in a dilute aqueous solution has been investigated. It was demonstrated that the co-crystallization of poly(L,L-lactide) [P(L,L)LA] and poly(d,d-lactide) [P(d,d)LA] chains under equimolar mixing of P(L,L)LA₄₆-b-PEO₁₁₃ and P(d,d)LA₅₆-b-PEO₁₁₃ copolymers resulted in the formation of stable and spontaneously water-redispersible stereocomplex micelles with semicrystalline P(L,L)LA/P(d,d)LA cores. It was shown that the P(L,L)LA₄₆ / P(d,d)LA₅₆-b-PEO₁₁₃ stereo-complex micelles produced by dialysis can be potential vehicles for the anticancer agent oxaliplatin     

Hydrolytic behavior of enantiomeric poly(lactide) mixed monolayer films at the air/water interface: stereocomplexation effects

The Langmuir film balance technique was used to determine the hydrolytic kinetics of monolayers of the stereocomplex formed from mixtures of enantiomeric polylactides, poly(L-lactide) (L-PLA) and poly(D-lactide) (D-PLA), spread at the air-water interface. The present study investigated parameters such as degradation medium, mixture composition, and time on the relative degradation rate. The pi-A isotherms of monolayers of the mixtures provide clear evidence for the presence of a stereocomplex; the isotherms of monolayers of individual polyenantiomer show a transition at about 8.5 mN/m, whereas the transition of monolayers containing a stereocomplex formed from the equimolar mixture shifted to higher surface pressure, about 11 mN/ m. The rate of hydrolysis was recorded by a change in occupied area when the monolayer is maintained at a constant surface pressure. The hydrolysis of the mixture monolayers under basic conditions was slower than that of individual polyenantiomer monolayers, depending on the composition or the degree of complexation. In the presence of proteinase K, the enzymatic hydrolysis rate of mixture monolayers with >50 mol % l-PLA was much slower than that of the single-component L-PLA monolayer. The monolayers formed from mixtures with < or =50 mol % L-PLA did not show any change of occupied areas. This result is explained by the inactivity of D-PLA and stereocomplexed chains to the enzyme. From both results, it can be concluded that the retardation of the hydrolysis of mixture monolayers is mainly due to a strong interaction between D- and L-lactide unit sequences, which prevents the penetration of water or enzyme into the bulk.     

Reversible helix sense inversion in surface-grafted poly(beta-phenethyl-L-aspartate) films

The reversible manipulation of the helix screw sense in surface-grafted poly(beta-phenethyl-L-aspartate) (PPELA) films by means of external stimuli was investigated. Ringopening polymerization of beta-phenethyl-L-aspartate N-carboxyanhydride initiated from primary amino-functionalized silicon and quartz substrates results in surface-grafted PPELA films in which the end-grafted polypeptide chains have a right-handed alpha-helical conformation. Upon annealing of the film at 150 degrees C for 30 min, a helix screw sense inversion takes place and the grafted chains adopt a left-handed pi-helical conformation. In the solid state, this left-handed pi-helical form is completely stable and cannot be changed by reheating and/or cooling. Upon immersion of the annealed grafted film in chloroform or other helicogenic solvents, the grafted polypeptide chains completely revert to their original right-handed alpha-helical form. Successive annealing and solvent treatment steps show that this helix sense inversion cycle can be repeated many times.     

Synthesis of poly(L-lactide)-block-polyisobutylene-block-poly(L-lactide), a new biodegradable thermoplastic elastomer

The anionic ring-opening polymerization of L-lactide was initiated by dipotassium-poly-isobutylene-alcoholate telechelic polymer to yield poly(L -lactide)-block-polyisobutylene-block-poly(L -lactide) triblock copolymer, a partially biodegradable thermoplastic elastomer. The pure triblock copolymer was obtained by gradient column chromatography on silica gel. The molar mass and molar mass distribution of the block copolymer was ascertained by SEC and quantitative ¹H NMR spectroscopy. It showed two glass transitions and microphase separation.     

Thermogelling hydrogels of poly(ε-caprolactone-co-D,L-lactide)–poly(ethylene glycol)–poly(ε-caprolactone-co-D,L-lactide) and poly(ε-caprolactone-co-L-lactide)–poly(ethylene glycol)–poly(ε-caprolactone-co-L-lactide) aqueous solutions

Thermogelling poly(ε-caprolactone-co-D,L -lactide)–poly(ethylene glycol)–poly(ε-caprolactone-co-D,L -lactide) and poly(ε-caprolactone-co-L -lactide)–poly(ethylene glycol)–poly(ε-caprolactone-co-L -lactide) triblock copolymers were synthesized through the ring-opening polymerization of ε-caprolactone and D,L -lactide or L -lactide in the presence of poly(ethylene glycol). The polymerization reaction was carried out in 1,3,5-trimethylbenzene with Sn(Oct)₂ as the catalyst at various temperatures, and the yields were about 96%. The molecular weights and polydispersities (M_w/M_n) by gel permeation chromatography were in the ranges of 5140–6750 and 1.35–1.45, respectively. The differential scanning calorimetry results showed that the melting temperatures of the poly(ε-caprolactone) components were between 30 and 40 °C. By the subtle tuning of the chemical compositions and microstructures of these triblock copolymers, the aqueous solutions underwent sol–gel transitions as the temperature increased, with the suitable lower critical solution temperature in the range of 17–28 °C at different concentrations. Transesterification in the polymerization process generated the redistribution of sequences, which remarkably affected the sol–gel transition temperature. The amphiphilic copolymers formed micelles in aqueous solutions with a diameter of 62 nm and a critical micelle concentration of about 0.032 wt % at 20 °C. Micelles aggregated as the temperature increased, leading to gel formation. The sol–gel transition was studied, with a focus on the structure–property relationship. It is expected to have potential applications in drug delivery and tissue engineering. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4091–4099, 2007     

Miscibility and isothermal crystallization of poly(L-lactide) and poly(trimethylene carbonate) blends

Miscibility, isothermal crystallization kinetics, and morphology of poly(L-lactide)/poly(trimethylene carbonate)(PLLA/PTMC) crystalline/amorphous blends were studied by differential scanning calorimetry(DSC) and optical microscopy(OM). The heterogeneity of OM images and an unchanged glass transition temperature showed that PLLA was immiscible with PTMC. During isothermal crystallization, the crystallization rate of PLLA improved when the PTMC content was low(≤ 20%). However, when the PTMC content was high(≥ 30%), the crystallization rate decreased significantly. The reason of these nonlinear changes in crystal kinetics was analyzed according to the nucleation and growth process by virtue of a microscope heating stage. The isothermal crystallization morphologies of the blends were also studied by polarized optical microscopy and the results confirmed the conclusions obtained from crystallization kinetics.     

About the role of water in surface-grafted poly(ethylene glycol) layers

We focus on the role of water in a protein-resistant poly(ethylene glycol) (PEG) layer. Using the combination of two experimental techniques, namely, the extended surface forces apparatus and the quartz crystal microbalance, we demonstrate that the water content inside these surface-grafted layers is over 80 vol % while the conformational space of the PEG chains is significantly modulated in water. Discrete and reversible film thickness transitions of 1.25 A size are shown to occur when the film is compressed, a finding that suggests a high degree of organization in the PEG/water complex. The results are discussed in terms of the excellent protein resistance properties of this type of surface.     

Electrochemically induced morphology and volume changes in surface-grafted poly(ferrocenyldimethylsilane) monolayers

Poly(ferrocenyldimethylsilanes), composed of alternating ferrocene and dimethylsilane units in their main chain and featuring a thiol end group, were self-assembled to redox-active monolayers on gold. Electrochemical atomic force microscopy was employed to study the morphology of the monolayers as a function of the applied potential in situ. Surface plasmon resonance spectroscopy and spectroscopic ellipsometry measurements, performed under electrochemical control, indicated thickness changes of up to 15% upon oxidizing and reducing the surface-grafted polymers. X-ray reflectivity measurements unambiguously showed a thickness increase upon electrochemical oxidation of the monolayers. The reversible thickness change was attributed to stretching of the polymer chains upon oxidation due to an increase in charge density and to the attraction of counterions and associated solvent molecules, which are released when the polymer film is reduced to its neutral state.