低温甲烷氧化偶联Li- ZnO/La2O3催化剂

采用浸渍法制备了Li- ZnO/La2O3催化剂并考察了其低温催化甲烷氧化偶联反应性能. 反应条件下, 在考察的w(Li)=2%和w(ZnO)=20%的Li- ZnO/La2O3在680 ℃得到了甲烷转化率为27.3%, C2选择性为65.2%, C2收率为17.8%的结果；在700 ℃, C2收率达到21.8%. Raman和XPS表征结果表明, 催化剂低温催化性能与表面的活性吸附氧物种含量相关；La2O2CO3物种可能是提高催化剂的C2选择性的关键.     

Ni/Al2O3和Ni/La2O3催化剂上低温乙醇水蒸气重整制氢

 采用浸渍、热分解和氢还原等步骤制备了两种纳米晶载体催化剂Ni/Al2O3和Ni/La2O3,应用X射线衍射、X射线光电子能谱、N2吸附和扫描电镜对催化剂的体相和表面结构进行了测定,采用固定床反应器考察了催化剂对乙醇水蒸气重整制氢反应的催化性能. 实验结果表明, 15.3%Ni/La2O3催化剂对乙醇的低温水蒸气重整反应表现出较高的催化活性和稳定性. 250 ℃时乙醇的转化率已达到80.7%,氢气的选择性为49.5%; 330 ℃时乙醇的转化率达到100%,氢气的选择性可达54.3%. 16.1%Ni/Al2O3催化剂对低温乙醇水蒸气重整反应的催化活性较低.     

CO2 在高分散 Ni/La2O3 催化剂上的甲烷化

 以 La2O3 为载体, 采用浸渍法制备了 10%Ni/La2O3 催化剂, 考察了该催化剂的 CO2 甲烷化反应性能. 结果表明, 在较低的温度 (350 oC) 和高空速 (约 30000 h–1) 下, 甲烷时空收率可大于 3000 g/(kg•h), 无论转化率高低, 甲烷选择性始终保持在 100%. X 射线衍射和 H2-程序升温还原等表征结果表明, CO2 在 Ni/La2O3 催化剂上的加氢机理可能与 Ni/γ-Al2O3 上不同, 并且 La2O2CO3 的形成有利于提高催化剂活性.     

La_2O_3/γ-Al_2O_3催化剂用于二甲醚二氧化碳重整制氢

采用等体积浸渍法制备了不同负载量的La2O3/γ-Al2O3催化剂,并考察了负载量和反应温度对催化剂用于二甲醚二氧化碳重整制氢反应的性能影响。结果表明,反应温度为550℃、La2O3负载量为15%时,催化剂表现出最好的性能:二甲醚的转化率为100%,二氧化碳的转化率达到85.4%,产物氢气的选择性高达93.3%,一氧化碳的选择性为76.04%,副产物甲烷的选择性仅为6.3%。550℃时其平均积炭速率为1.387 5 mg/(g·h)。研究还利用XRD、BET、TEM、TG等方法对催化剂进行了表征。     

La2O3对费-托合成沉淀铁催化剂的影响

制备了一系列不同La2O3含量(100Fe/2.8Si/nLa,n=0,0.5,1,2,4,原子比)的沉淀铁费-托合成催化剂,通过原位X射线衍射、一氧化碳程序升温还原和N2吸附-脱附等手段对催化剂进行了表征.催化剂费-托反应评价在固定床反应器中进行.结果表明,少量La2O3助剂(La/Fe≤0.01,原子比)的加入显著降低了Fe2O3颗粒大小,增加了催化剂的比表面积和分散度,有利于碳化铁的形成,从而导致费-托合成催化活性的提高.随着La2O3含量的进一步增加(La/Fe≥0.02),催化剂表面大量La2O3的覆盖和LaFeO3化合物的形成降低了铁碳化物的形成,反应活性反而降低.因此,最适宜的La2O3含量为La/Fe=0.01.La2O3的加入提高了甲烷的选择性,抑制了C5+碳氢化合物的形成.     

Ru-La_2O_3/γ-Al_2O_3催化剂合成、表征及CO选择氧化

采用浸渍法制备系列Ru-La2O3/γ-Al2O3复合氧化物催化剂,通过XRD、H2-TPR、CO-TPR、XPS、BET等方法对催化剂进行表征,考察La2O3的加入量、预处理方法对催化剂上CO选择氧化性能的影响.结果表明,110-170℃时Ru1La6/Al2O3催化剂上CO转化率达到99%以上,氧气利用率达55.7%以上.和Ru/Al2O3相比,Ru1La6/Al2O3催化剂在较低温度具有高活性,活性温度区间变宽.适量La2O3的加入促进了活性组分在载体表面分散,提高了催化剂的活性.经氢气预处理的Ru1La6/Al2O3催化剂活性最佳,催化剂上Ru物种结合能降低,表面钌物种活性位增多,且表面晶格氧浓度增大,更有利于CO气体在催化剂表面上的氧化反应.     

制备方法对La改性的Ni/γAl2O3催化甲烷部分氧化的研究

采用共沉淀法和浸渍法制备La改性的Ni/γAl2O3催化剂，并用于催化甲烷部分氧化反应。共沉淀法制备的催化剂表现出较高的活性和稳定性。空速为80000h－1、800℃时甲烷的转化率接近100％，H2的选择性达99.8％，且在稳定性实验中保持15h活性变化不大。实验采用BET、TPR和XRD说明共沉淀法制备的镍基氧化铝催化剂中，La的加入提高了催化剂的比表面积，有效的抑制了大颗粒NiAl2O4的形成，降低了催化剂活性组分的还原温度，对POM显示出很高的催化活性。     

Ce1-xNixO2/Al2O3/FeCrAl催化剂的制备及其甲烷催化燃烧性能

以FeCrA l合金薄片为基体,A l2O3为过渡载体,Ce1-xN ixO2(x=0.1-0.3)、CeO2和N iO为活性组分,制备了Ce1-xN ixO2/A l2O3/FeCrA l、CeO2/A l2O3/FeCrA l和N iO/A l2O3/FeCrA l金属基整体式催化剂,在固定床微型反应器中评价了催化剂的甲烷催化燃烧性能,用SEM、XRD、TPR等方法对催化剂的物相、表面形貌和氧化还原性进行了表征.结果表明,Ce1-xN ixO2在催化剂表面的分散性比CeO2和N iO要好;Ce1-xN ixO2/A l2O3/FeCrA l(x=0.1-0.3)催化剂具有好的催化活性和高温稳定性,CeO2/A l2O3/FeCrA l和N iO/A l2O3/FeCrA l催化剂有好的初活性但高温稳定性较差;活性组分与A l2O3和FeCrA l金属基体之间存在较强的相互作用.     

甲烷氧化偶联W-Mn/SiO2催化剂上O2-脉冲频率效应(PFE)的研究

采用频率脉冲反应方法,以Mn-Na2WO4/S iO2催化剂上甲烷氧化偶联为探针反应,通过实时、原位的四极质谱检测手段,研究氧物种对甲烷C-H键选择性活化的微观历程.首次发现了Mn-Na2WO4/S iO2催化剂上O2-脉冲频率效应,即脉冲反应产物量随氧脉冲注入频率的增加而增加.研究结果表明,在反应条件下,Mn-Na2WO4/S iO2催化剂上有两种活化甲烷的氧物种同时存在,它们活化甲烷的方式不同。     

La_2O_3对CuO/CeO_2水煤气变换反应催化剂微观结构及催化性能的影响(英文)

以La2O3为助剂,采用共沉淀法制备了具有良好催化活性和热稳定性的CuO/CeO2-La2O3水煤气变换反应催化剂,其中,当La2O3含量为2wt%时,催化剂的催化性能最为优异.同时运用X射线衍射、N2吸附-脱附、Raman光谱、程序升温还原等手段,研究了不同含量的La2O3对CuO/CeO2催化剂微观结构及催化性能的影响.结果表明,La2O3助剂进入了载体CeO2的晶格并对CuO/CeO2催化剂的微观结构和催化性能产生了直接影响,适量La2O3的添加可以抑制CuO和CeO2晶格的长大、增强CuO与CeO2间的相互作用、提高催化剂的比表面积、促进CeO2载体中生成更多的氧空位,CuO/CeO2催化剂的催化活性和热稳定性也明显改善.     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Copper catalyzed/mediated synthetic methodology for ebselen and related isoselenazolones

Scope of the copper catalyzed/mediated selenium-nitrogen coupling reaction has been studied for the synthesis of isoselenazolones. It is noticed that the 2-chloro, 2-bromo-, and 2-iodo-aryl amides substrates can be exploited in the selenium-nitrogen coupling reaction by employing 25-100 mol % of CuI/1,10-phenanthroline (L) and potassium carbonate as a base in DMF. Furthermore, electron rich 2-chloro-arylamides also underwent selenium-nitrogen coupling reaction to give biologically important selenium-nitrogen heterocycles. Also, copper-catalyzed selenium-nitrogen coupling reaction has been meticulously applied for the synthesis of diaryl diselenides having methoxy, amine, and amide functionality from respective aryl iodides in the presence of stoichiometric amount of succinimide as an external Se-N coupling partner.     

Knoevenagel condensation catalyzed by novel Nmm-based ionic liquids in water

A series of novel N-methyl morpholine (Nmm) based ionic liquids with 1,2-propanediol group were synthesized and used as catalysts for Knoevenagel condensation at room temperature in water. Under the effect of the catalyst, various aldehydes or aliphatic ketones could react with a wide range of activated methylene compounds well, including malononitrile, alkyl cyanoacetate, cyanoacetamide, β-diketone, barbituric acid, 2-arylacetonitrile and thiazolidinedione. Furthermore, most of the products could be separated just by filtrating and washing with water. Additionally, the catalyst is recyclable and applicable for the large-scale synthesis.     

Construction of polyheterocyclic spirotetrahydrothiophene derivatives via sulfa-Michael/aldol cascade reaction

A series of polyheterocyclic spirotetrahydrothiophene derivatives were obtained in moderate to excellent yields via a catalyst-free sulfa-Michael/aldol cascade reaction of chalcones 1 and commercially available 1,4-dithiane-2,5-diol 2 under mild conditions. We also present the first asymmetric sulfa-Michael/aldol cascade reaction of chalcones 1 and commercially available 1,4-dithiane-2,5-diol 2 with moderate to good enantioselectivities catalyzed by readily available chiral phase-transfer catalysts (PTCs).     

Suzuki-Miyaura reactions of the soluble guanylate cyclase inhibitor NS2028: a non-product specific route to C-8 substituted analogues

Both soluble guanylate cyclase (sGC) inhibitors ODQ 1 and NS2028 2 are synthesized via improved protocols. In the former case treating 3,4-dihydroquinoxalin-2(1H)-one oxime 8, which can be prepared in two steps from 1,2-benzenediamine, with 1,1′-carbonyldiimidazole (CDI) gives the dihydro-ODQ 10 that in the presence of KMnO₄ oxidises to give ODQ 1 in an overall yield of 46% starting from 1,2-benzenediamine. In the latter case, the synthesis affords NS2028 2 from 2-amino-4-bromophenol 3 in three steps with an overall yield of 85% and avoids the need for chromatography. Furthermore, Suzuki-Miyaura reaction conditions are described that enable the preparation of 8-aryl and 8-heteroaryl derivatives of NS2028 directly from NS2028 2. Finally, demethylation of the 8-(methoxyphenyl) substituted analogues afforded the 8-(hydroxyphenyl) derivatives 40-42. All new products are fully characterised.