Electrooptic sensor module fabrication for near-field intrabody communication

In this paper, we describe how to obtain a low cost electrooptic (EO) sensor module for the mass production of near-field intrabody communication devices. In our previous study, we used a bulk cleavage technique to fabricate EO modulators without the need for any optical polishing or washing processes. In this study, we fabricated EO modulators as a miniaturized chip sensor without a base portion, and clarified the feasibility of assembling optical components by only a passive alignment technique with a compact housing.     

Dye-sensitized solar cell module realized photovoltaic and photothermal highly efficient conversion via three-dimensional printing technology

Three-dimensional(3D) printing technology is employed to improve the photovoltaic and photothermal conversion efficiency of dye-sensitized solar cell(DSC) module. The 3D-printed concentrator is optically designed and improves the photovoltaic efficiency of the DSC module from 5.48% to 7.03%. Additionally, with the 3D-printed microfluidic device serving as water cooling, the temperature of the DSC can be effectively controlled, which is beneficial for keeping a high photovoltaic conversion efficiency for DSC module. Moreover, the 3D-printed microfluidic device can realize photothermal conversion with an instantaneous photothermal efficiency of 42.1%. The integrated device realizes a total photovoltaic and photothermal conversion efficiency of 49% at the optimal working condition.     

Guided-wave multiwavelength polarization-insensitive processing module for a parallel multicomparand perfect-match algorithm

We present a design for a planar guided-wave polarization-insensitive (intensity-based) optoelectronics module that provides a parallel perfect-match search for database and text processing. The module is based on a content-addressable memory model for parallel information retrieval. We propose the use of planar guided-wave optics with multiwavelength processing to achieve a substantially high degree of performance and parallelism. Based on initial performance analysis, the proposed module is capable of achieving an aggregate processing speed of 10(12) bits/s.     

Optical pump concepts for highly efficient quasi-three-level lasers

Efficient quasi-three-level laser operation requires the generation of the highest possible pump rate from a given pump source. We derive the fundamental scaling laws for the pump rate and we extract optimization criteria for pump concepts from these laws. The analysis is then applied to the thin-disk laser. Based on the results, a novel pump concept for thin-disk lasers is proposed, which allows for several tens of pump beam passes and reduces the optical complexity of conventional pump concepts. Furthermore, the beam quality of the pump source is preserved almost completely, facilitating the highest possible pump rate.     

Design and fabrication of highly dispersive semiconductor double-chirped mirrors

We report on the development of semiconductor double-chirped mirrors with the group delay dispersion of ?3,800 ± 100 fs² in the wavelength range between 1,058 ÷ 1,064 nm and reflectivity of 99.1 %. The simplified plane-wave reflection transfer method was used to design the mirror multilayer stack. The mirror contains an epitaxial AlAs/GaAs structure topped with a SiNx antireflective layer.     

Microlens fabrication on single-mode fibres for efficient coupling from laser diodes

An analysis of the etching process for forming a truncated conical microlens on the end surface of a single-mode fibre (SMF) so as to improve its coupling efficiency with a laser diode (LD) has been carried out. This is followed by a simple geometric-optics and electromagnetic analysis to calculate this coupling efficiency, when the lens is formed on a SMF fabricated by the MCVD technique. The theory is supported by measurements which gave a maximum coupling efficiency of 57%.     

逐级优化制定离轴三反射光学系统加工装调公差

逐级优化法是根据离轴三反射光学系统结构参数的像差灵敏度系数大小来确定主镜、次镜和第三反射镜的加工次序的。其方法是逐级优化确定各光学零件的加工公差,加工完成后测量光学元件结构参数,代入光学设计软件进行优化,进而确定光学系统的装调公差。采用该方法制定三反射系统的加工装调公差时将加工和设计过程有机的结合起来,在满足设计要求的前提下使系统的加工和装调公差得到最大程度地放松。     

An efficient method for solving highly anisotropic elliptic equations

Solving elliptic PDEs in more than one dimension can be a computationally expensive task. For some applications characterized by a high degree of anisotropy in the coefficients of the elliptic operator, such that the term with the highest derivative in one direction is much larger than the terms in the remaining directions, the discretized elliptic operator often has a very large condition number – taking the solution even further out of reach using traditional methods. This paper will demonstrate a solution method for such ill-behaved problems. The high condition number of the D-dimensional discretized elliptic operator will be exploited to split the problem into a series of well-behaved one and (D − 1)-dimensional elliptic problems. This solution technique can be used alone on sufficiently coarse grids, or in conjunction with standard iterative methods, such as Conjugate Gradient, to substantially reduce the number of iterations needed to solve the problem to a specified accuracy. The solution is formulated analytically for a generic anisotropic problem using arbitrary coordinates, hopefully bringing this method into the scope of a wide variety of applications.     

Supercontinuum generation in square photonic crystal fiber with nearly zero ultra-flattened chromatic dispersion and fabrication tolerance analysis

This paper presents a simple index-guiding square photonic crystal fiber (SPCF) where the core is surrounded by air holes with two different diameters. The proposed design is simulated through an efficient full-vector modal solver based on the finite difference method with anisotropic perfectly matched layers absorbing boundary condition. The nearly zero ultra-flattened dispersion SPCF with low confinement loss, small effective area as well as broadband supercontinuum (SC) spectra is targeted. Numerical results show that the designed SPCF has been achieved at a nearly zero ultra-flattened dispersion of 0 ± 0.25 ps/(nm·km) in a wavelength range of 1.38 μm to 1.89 μm (510 nm band) which covers E, S, C, L and U communication bands, a low confinement loss of less than 10⁻⁷ dB/m in a wavelength range of 1.3 μm to 2.0 μm and a wide SC spectrum (FWHM = 450 nm) by using picosecond pulses at a center wavelength of 1.55 μm. We then analyze the sensitivity of chromatic dispersion to small variations from the optimum value of specific structural parameters. The proposed index-guiding SPCF can be applicable in supercontinuum generation (SCG) covering such diverse fields as spectroscopy applications and telecommunication dense wavelength division multiplexing (DWDM) sources.     

Loss analysis and increasing of the fabrication tolerance of resonant coupling by tapering the mode beating section

The film mode matching method was used to analyze the inter waveguide coupling losses in a passive asymmetric twin waveguide caused by waveguide width and refractive index variation for both resonant and adiabatic coupling at a wavelength of 1,550 nm. The reasons for power losses are shown. It is demonstrated that tapering the mode beating section of the resonant coupler can increase the fabrication tolerance of resonant coupling without increasing the coupling length.     

Sonochemical synthesis and fabrication of perovskite type calcium titanate interfacial nanostructure supported on graphene oxide sheets as a highly efficient electrocatalyst for electrochemical detection of chemotherapeutic drug

In green approaches for electrocatalyst synthesis, sonochemical methods play a powerful role in delivering the abundant surface areas and nano-crystalline properties that are advantageous to electrocatalytic detection. In this article, we proposed the sphere-like and perovskite type of bimetal oxides which are synthesized through an uncomplicated sonochemical procedure. As a yield, the novel calcium titanate (orthorhombic nature) nanoparticles (CaTiO₃ NPs) decorated graphene oxide sheets (GOS) were obtained through simple ultrasonic irradiation by a high-intensity ultrasonic probe (Titanium horn; 50 kHz and 60 W). The GOS/CaTiO₃ NC were characterized morphologically and chemically through the analytical methods (SEM, XRD, and EDS). Besides, as-prepared nanocomposites were modified on a GCE (glassy carbon electrode) and applied towards electrocatalytic and electrochemical sensing of chemotherapeutic drug flutamide (FD). Notably, FD is a crucial anticancer drug and also a non-steroidal anti-androgen chemical. Mainly, the designed and modified sensor has shown a wide linear range (0.015–1184 µM). A limit of detection was calculated as nanomolar level (5.7 nM) and sensitivity of the electrode is 1.073 μA μM⁻¹ cm⁻². The GOS/CaTiO₃ modified electrodes have been tested in human blood and urine samples towards anticancer drug detection.     

A facile and low-cost fabrication of TiO2 compact layer for efficient perovskite solar cells

A uniform and compact hole blocking layer is necessary for high efficient perovskite-based thin film solar cell. In this study, we fabricated TiO₂ compact layers by using a simple dip-coating method in contrast to the widely used techniques such as spin coating and spray pyrolysis. In this study, we optimized the surface morphologies of dip-coating based TiO₂ compact layers by controlling the concentration of Ti precursor solution diluted in ethanol. The analyses of devices performance characteristics showed that thickness and surface morphologies of different TiO₂ compact layers played a critical role in affecting the efficiencies. The dip-coating route to prepare TiO₂ compact layers employed in this study is more amenable to fabricate the large area device and less expensive.     

HCSB TBM ���ο���������ṹ���ܷ���

介绍了HCSB TBM屏蔽块的初步设计,根据RCC-MR相关标准,在4种典型工况下对TBM屏蔽块的结构性能进行了分析和校核。计算结果表明：所有工况下的整体形变都较小,一次应力和二次应力均满足RCC-MR标准。     

HCSB TBM 屏蔽块初步设计与结构性能分析

介绍了HCSB TBM 屏蔽块的初步设计,根据RCC-MR 相关标准,在4 种典型工况下对TBM 屏蔽块的结构性能进行了分析和校核。计算结果表明：所有工况下的整体形变都较小,一次应力和二次应力均满足 RCC-MR 标准。     

适用于Linux系统的高效可并行电磁PIC计算技术

为了能够使大型机和高性能集群得到更好的加速比和并行计算效率,在深入研究并行和FDTD-PIC算法的基础上,在CHIPIC软件平台上开发了Linux系统下的大型全三维可并行电磁PIC代码。分别以一个磁绝缘线振荡器、回旋管和相对论速调管为例进行测试和计算,得到了3.70,6.72和6.00的加速比,验证了在同等的进程数下,高性能集群能够得到比PC机群高得多的加速比和计算效率,能够更好地利用计算资源。     

适用于Linux系统的高效可并行电磁PIC计算技术

为了能够使大型机和高性能集群得到更好的加速比和并行计算效率,在深入研究并行和FDTD-PIC算法的基础上,在CHIPIC软件平台上开发了Linux系统下的大型全三维可并行电磁PIC代码。分别以一个磁绝缘线振荡器、回旋管和相对论速调管为例进行测试和计算,得到了3.70,6.72和6.00的加速比,验证了在同等的进程数下,高性能集群能够得到比PC机群高得多的加速比和计算效率,能够更好地利用计算资源。     

A highly efficient algorithm for the generation of random fractal aggregates

A technique to generate random fractal aggregates where the fractal dimension is fixed a priori is presented. The algorithm utilizes the box-counting measure of the fractal dimension to determine the number of hypercubes required to encompass the aggregate, on a set of length scales, over which the structure can be defined as fractal. At each length scale the hypercubes required to generate the structure are chosen using a simple random walk which ensures connectivity of the aggregate. The algorithm is highly efficient and overcomes the limitations on the magnitude of the fractal dimension encountered by previous techniques.     

Adaptive station grouping: a highly efficient protocol for optical LANs

A new medium access control protocol for wavelength division multiplexing (WDM) Star Networks, which is capable of achieving a high performance under bursty traffic conditions, is introduced. According to the proposed protocol, the access of stations to the wavelengths is based on their grouping. A separate set of groups is maintained for each wavelength within the traffic stream. All the groups are granted permission to transmit on the corresponding wavelength in a round-robin fashion. The main objective of the grouping algorithm is to have in each group exactly one station which is ready to transmit on the corresponding wavelength, at any given time. In this way, idle slots and collisions are minimized and a nearly optimal throughput-delay performance is achieved. The grouping of stations is dynamically modified at each time slot according to the network feedback information. Due to the dynamic nature of the grouping algorithm, the protocol is capable of being adapted to the sharp changes of the stations’ traffic. Extensive simulation results are presented which indicate that the proposed protocol achieves a significantly superior performance than other well-known medium access control protocols for WDM Star Networks.