Reflection of lamb waves in a solid layer by a grating formed by mechanical resonators

The scattering of the mth Lamb mode by a grating formed by P chains of closely spaced identical mechanical resonators (springs with loads) attached to the boundaries of a solid layer is considered. The distance between the chains is identical to the half-wavelength of the given mode at a frequency ω identical to or close to the natural frequency of the resonator chain with allowance for the interaction of neighboring chains through inhomogeneous modes. The coefficient of reflection of the mth Lamb mode from the aforementioned diffraction grating is calculated.     

Absorption of flexural waves by a pair of mechanical resonator chains mounted on a plate

The scattering of flexural waves by two chains of mechanical resonators characterized by effective admittances is considered. In the first (lower) chain, the effective admittance is represented by a susceptance, whereas, in the second (upper) chain, the resonators are characterized by a complex admittance. The spatial periods of the chains are identical. A plane harmonic flexural wave is obliquely incident on the upper chain, and the scattered field formed by the chains is expressed as a superposition of homogeneous and inhomogeneous Bragg spectra. Intense scattering of the incident wave only occurs in the case of mutual compensation of the resonator susceptance and the radiation admittance. A pair of chains with periods not exceeding the half-wavelength of the flexural wave represents an effective insulator for this wave. In the half-space behind the first chain, the zeroth spectral component of the scattered field completely cancels the resonance-frequency incident flexural wave. Let the second chain be positioned at one of the displacement antinodes of the total field formed by the incident field and the zeroth scattered spectrum. Then, if the active components of the effective admittance of resonators belonging to the second chain are identical to the radiation admittance, the incident flexural wave is completely absorbed by the resonators.     

Scattering of a Rayleigh wave by monopole-dipole resonators

The problem of scattering of a Rayleigh wave by a chain of identical closely spaced monopole-dipole resonators with friction is considered. The values of resonator parameters that provide the rejection of the Rayleigh wave are found. The conditions under which the Rayleigh wave is much more efficiently reflected by the dipole resonators than by the monopole ones are determined.     

The attenuation of rayleigh surface waves by surface roughness

This paper presents a calculation of the attenuation length of Rayleigh surface waves in the presence of surface roughness. We consider Rayleigh waves on the surface of a semi-infinite isotropic elastic continuum, and the method we use produces the contribution to the attenuation rate proportional to the square of the rms amplitude of the roughness. We obtain explicit expressions for the contribution to the attenuation rate from roughness-induced scattering into bulk transverse and longitudinal acoustic waves, and into Rayleigh waves. Our derivation makes use of a Green's function method. When the wavelength λ of the Rayleigh wave is long compared to the transverse correlation length a that characterizes the surface roughness, all contributions to the attenuation rate are proportional to the fifth power of the frequency. When λ is comparable to or smaller than a, the attenuation constant varies more slowly with frequency. For a model of the surface roughness, we present numerical calculations of the relative magnitude and frequency dependence of the various contributions to the attenuation rate. The Green's functions used here may be applied to a number of calculations. A derivation of their form is provided in an Appendix.     

基于矩形谐振环的新型复合周期结构左手材料研究

通过实验及仿真研究了基于矩形谐振环的新型三角形和三矩形开口谐振环金属线复合周期结构左手材料.仿真研究了以金属铜三角谐振环和三矩形谐振环（SRRs）为基本单元的周期结构负磁导率材料,结果显示两种谐振环均能产生很好的谐振效果,即能产生负磁导率;设计、制作并实验和仿真研究了三角谐振环和三矩形谐振环金属线复合周期结构左手材料,实验结果分别在9.5—13.3GHz和9.8—12.5GHz出现良好的负折射效应,与仿真结果具有较好的一致性.该研究对新型周期结构左手材料的研究、设计和研制具有重要的科学意义和应用前景. 关键词： 左手材料 负折射 三角形谐振环 三矩形谐振环     

Green's functions for a volume source in an elastic half-space

Green's functions are derived for elastic waves generated by a volume source in a homogeneous isotropic half-space. The context is sources at shallow burial depths, for which surface (Rayleigh) and bulk waves, both longitudinal and transverse, can be generated with comparable magnitudes. Two approaches are followed. First, the Green's function is expanded with respect to eigenmodes that correspond to Rayleigh waves. While bulk waves are thus ignored, this approximation is valid on the surface far from the source, where the Rayleigh wave modes dominate. The second approach employs an angular spectrum that accounts for the bulk waves and yields a solution that may be separated into two terms. One is associated with bulk waves, the other with Rayleigh waves. The latter is proved to be identical to the Green's function obtained following the first approach. The Green's function obtained via angular spectrum decomposition is analyzed numerically in the time domain for different burial depths and distances to the receiver, and for parameters relevant to seismo-acoustic detection of land mines and other buried objects.     

Scattering of surface waves by a sub-surface crack

The scattering of Rayleigh waves by a two-dimensional sub-surface crack, which is perpendicular to the free surface of an elastic half-space, is investigated. The boundary-value problem for the scattered field is stated, and reduced to an uncoupled system of integral equations which are solved numerically. At large distances from the crack the scattered field is shown to consist of outgoing Rayleigh waves and cylindrical body waves. Graphs of the variation of the amplitude and phase of the forward and backward scattered Rayleigh waves with the frequency and the geometrical parameters of the crack are presented. The stress intensity factors at both crack tips have also been obtained.     

Simulation and synthesis of elastic wave absorbers at the boundary of a rigid body: Incidence of longitudinal waves

Results of a computer simulation of an impedance absorber for longitudinal plane elastic waves incident on a free boundary of a rigid body are presented. The absorbing elements are mechanical resonators (of the elasticity-mass type) with two degrees of freedom and, hence, with two resonance frequencies, which correspond to the normal and tangential oscillations of the resonator. Formulas for calculating the absorber efficiency as a function of frequency and angle of incidence of longitudinal waves are derived with allowance for the absorption of both longitudinal and shear waves at their reflection from the absorbing surface. These formulas are used to solve the problem of synthesizing optimal absorbers that are characterized by the maximal average value of the absorption coefficient in preset ranges of frequency and angle of incidence. The possibility of increasing this average value by increasing the loss coefficient of the resonators or by using two types of resonators with different resonance frequencies is studied. The results of the calculations are presented in graphic form.     

Analysis of coherent surface wave dispersion and attenuation for non-destructive testing of concrete

Rayleigh waves measurements are used to characterise cover concrete and mortar in the frequency range 60–180 kHz. At these frequencies, the wavelength is comparable to the size of the aggregates, and waves propagate in a multiple scattering regime. Acquired signals are then difficult to interpret due to an important incoherent part. The method proposed here is the study of the coherent waves, obtained by averaging signals over several configurations of disorder. Coherent waves give information on an equivalent homogeneous medium. To acquire a large amount of measurements with accuracy, an optimised piezoelectric source is used with a laser interferometer for reception. Adapted signal processing technique are presented to evaluate the coherent phase and group velocities and also the coherent attenuation parameter. The sensitivity of these three parameters with the properties of concrete is discussed, as well as the necessity to use coherent waves to obtain accurate results.     

Laser-generation of directional surface acoustic wave pulses in metals

A technique is presented for the generation of directional beams of ultrasonic Rayleigh waves in metals. A pulsed thermoelastic line-source of Rayleigh waves is produced by line-focusing Q-switched Nd: YAG laser pulses onto metal surfaces with a cylindrical lens. Ultrasonic frequency components of the resultant Rayleigh waves, detected by resonant PZT probes, are shown to be emitted preferentially broadside from the line-source in narrow beams. The directional characteristics of the beams are presented. Corresponding theoretical expressions are developed to describe the directivity pattern, and are found to be in good agreement with experimental results.     

Amélioration du coefficient de qualité de résonateurs à ondes transverses sur plaques fines de quartz

Resonators based on transverse waves propagating in thin quartz plates have been optimized using a specific fabrication step in order to improve their quality coefficient and to minimize their insertion losses. Systematic measurements have been performed, allowing to emphasize the efficiency of the proposed approach. The possibility to fabricate resonators operating in the frequency range 100–250 MHz and exhibiting quality coefficient times frequency product greater than 10 ¹³ is there demonstrated. This last figure corresponds to more than the state of the art in surface acoustic wave resonators.     

Rayleigh wave dispersion and attenuation on a statistically rough free surface of a hexagonal crystal

Dispersion and attenuation of Rayleigh surface acoustic waves on a statistically rough free surface of a Z-cut hexagonal crystal were analytically studied using a modified mean-field method within the perturbation theory. Numerical calculations were carried out in the frequency range accessible for the perturbation theory using expressions for the real and imaginary parts of the complex frequency shift of Rayleigh waves caused by a slight surface roughness. The Rayleigh wave dispersion and attenuation in the Z-cut hexagonal crystal were shown to coincide qualitatively with those in an isotropic medium, differing only quantitatively. In the long-wavelength limit λ?a, where a is the lateral roughness correlation length, explicit analytical expressions for the relative change in the phase velocity and the inverse damping depth of Rayleigh waves were derived and used in numerical calculations.     

激光激发瑞利波检测表面倾斜缺陷的研究

研究激光激发瑞利波检测样品的表面倾斜缺陷。基于频域热弹耦合方程,采用有限元方法建立激光激发瑞利波检测倾斜缺陷的数值模型,研究倾斜缺陷的检测机理。数值计算含不同的长度及倾斜角度缺陷的样品中瞬态位移波形,分析瑞利波在倾斜缺陷处模式转换的过程,研究各种瑞利波的传播路径。在此基础上,研究缺陷宽度与材料黏性对瑞利波传播及缺陷检测的影响。结果表明:瑞利波在缺陷处产生的反射及透射瑞利波的到达观测点的时间可以检测缺陷位置和长度,瑞利波在缺陷的底部发生模式转换产生的切变波可以检测缺陷倾斜角度。数值结果和已有的实验结果一致,从而为表面倾斜缺陷的检测提供有效的理论依据。     

水中微小波纹圆柱体声散射低频共振调控

塑料类高分子材料甲基丙烯酸甲酯-亚克力(PMMA)圆柱中亚音速Rayleigh波低频隧穿共振可引起反向散射增强,在低频标准散射体设计等领域具有重要应用价值.提出一种微弱形变的规则波纹表面结构,可实现水中PMMA圆柱反向散射低频共振频率的无源调控.利用微扰法推导了水中微弱形变规则波纹圆柱反向散射低频共振频率偏移的近似解,讨论了波纹微扰系数、周期对规则波纹圆柱共振频率偏移的影响规律.基于Rayleigh波相位匹配方法分析了低频共振频率偏移的机理.研究表明:微弱形变规则波纹圆柱中亚音速Rayleigh波沿微弱形变波纹表面传播,与光滑圆柱体相比,传播路径的改变引起Rayleigh波传播相位变化,导致了Rayleigh波低频共振频率发生偏移.最后开展了微弱形变规则波纹圆柱体声散射特性水池实验,获取了其反向散射共振频率,明显观察到了规则波纹圆柱共振频率偏移现象,与理论预报结果吻合较好.     

Rayleigh wave propagation along the boundary of a non-Newtonian fluid-saturated porous medium

The Frenkel-Biot theory is used to study the reflection of elastic waves from the boundary of a non-Newtonian (Maxwell) fluid-saturated porous medium. The velocity and attenuation of a Rayleigh surface wave propagating along the boundary of the medium are determined. Two models of a fluid-saturated porous medium are used for calculation: with pore channels of a fixed diameter and with a lognormal distribution of pore channels in size. The results of calculations show that, when the fluid in the porous medium is characterized by a small Deborah number (i.e., exhibits non-Newtonian properties), the velocity of Rayleigh waves exhibits a considerable frequency dispersion. The results also suggest that, in principle, it is possible to estimate the Deborah number from the measured frequency dispersion of the Rayleigh wave velocity.     

Influence of a structurally damaged surface layer of the hexagonal crystal on the dispersion and attenuation of Rayleigh surface acoustic waves

Analytical expressions for the dispersion of the phase velocity and the inverse attenuation length of Rayleigh waves are derived with allowance made for a thin (as compared to the length of the surface wave) isotropic damaged surface layer that is contiguous with vacuum and located on the surface of a hexagonal crystal with the sixfold axis perpendicular to the surface. It is demonstrated that, in the limit of long wavelengths (as compared to the characteristic inhomogeneity size), which is of greatest interest for experimenters, the change in the dispersion of the phase velocity of Rayleigh waves is proportional to the second power of the frequency, whereas the inverse attenuation length of Rayleigh waves is proportional to the fifth power of the frequency. The inverse attenuation length of the Rayleigh wave is calculated numerically. The calculation method previously proposed by one of the authors (Kosachev, 1998) is generalized to the case of an isotropic damaged layer on an anisotropic (hexagonal) substrate.     

Piezoelectric resonators with mechanical damping and resistance in current conduction

A novel design method for high Q piezoelectric resonators was presented and proposed using the 3-D equations of linear piezoelectricity with quasi-electrostatic approximation which include losses attributed to mechanical damping in solid and resistance in current conduction. There is currently no finite element sofware for estimating the Q of a resonator without apriori assumptions of the resonator impedance or damping. There is a necessity for better and more realistic modeling of resonators and filters due to miniaturization and the rapid advances in frequency ranges in telecommunication. We presented new three-dimensional finite element models of quartz and barium titanate resonators with mechanical damping and resistance in current conduction. Lee, Liu and Ballato’s 3-D equations of linear piezoelectricity with quasi-electrostatic approximation which include losses attributed to mechanical damping in solid and resistance in current conduction were formulated in a weak form and implemented in COMSOL. The resulting finite element model could predict the Q and other electrical parameters for any piezoelectric resonator without apriori assumptions of damping or resistance. Forced and free vibration analyses were performed and the results for the Q and other electrical parameters were obtained. Comparisons of the Q and other electrical parameters obtained from the free vibration analysis with their corresponding values from the forced vibration analysis were found to be in excellent agreement. Hence, the frequency spectra obtained from the free vibration analysis could be used for designing high Q resonators. Results for quartz thickness shear AT-cut and SC-cut resonators and thickness stretch poled barium titanate resonators were presented. An unexpected benefit of the model was the prediction of resonator Q with energy losses via the mounting supports.     

谐振管内非线性驻波的有限体积数值算法

为了扩展谐振管内非线性驻波在工程中的应用, 以及克服现有数值计算方法仅局限于求解直圆柱形和指数形谐振管内非线性驻波的问题. 根据变截面的非稳态可压缩热黏性流体Navier-Stokes方程和空间守恒方程, 并基于求解压力速度耦合方程的半隐式算法和交错网格技术, 构建一种能够计算任意形状轴对称谐振管受活塞驱动时内部非线性驻波的有限体积算法. 分别对圆柱形、指数形和圆锥形谐振管内的非线性驻波进行仿真计算. 通过与现有试验结果以及数值仿真结果的对比, 验证了该方法的正确性.并获得除驻波声压之外的另外一些新的物理结果, 包括速度、密度、温度的瞬时变化.在直圆柱形谐振管内产生冲击声压波, 速度波形中出现钉状结构.而在指数形和圆锥形谐振管内产生高声压幅值的驻波, 没有出现冲击波, 速度波形中均未发现钉状结构. 计算结果表明谐振管内非线性驻波的物理属性与谐振管形状之间有密切关系.     

Effect of pinning fields on the spin wave band gaps in comblike structures

We consider, in the frame of the long-wavelength Heisenberg model, the effect of a pinning field on the spin wave band gaps and transmission spectra of one-dimensional comb-like structures. Using a Greens function method, we obtained closed-form expressions for the band structure and the transmission coefficients for an arbitrary value of the number N of sites (Nof resonators) in the comb-like structure. We report the opening-up of stop bands inside the pass-bands due to the effect of the pinning field at the ends of the resonators of the comb. These structures, composed of one-dimensional ferromagnetic materials, may exhibit large gaps where the propagation of spin waves is forbidden. The width and frequency position of these gaps depends on the strength of the pinning field.Received: 17 October 2003, Published online: 9 April 2004PACS: 75.30.Gw Magnetic anisotropy - 75.30.Ds Spin waves - 75.75. + a Magnetic properties of nanostructures     

Experimental study of surface wave propagation in strongly heterogeneous media

In the present paper, the propagation of Rayleigh waves in a strongly heterogeneous medium is discussed. Scattering of stress waves is a difficult scientific problem. Specifically, the interaction of surface waves with distributed inhomogeneity seems highly complicated due to the existence of two displacement components. Rayleigh waves undergo significant attenuation and velocity change depending on the frequency and the inhomogeneity content. The aim of this study is to highlight the dispersive behavior of concrete, especially when damaged, and increase the experimental data in an area where the work is limited.