复合SERS基底的构建及性质

通过自组装方法以对巯基苯胺(PATP)为偶联分子, 在石英基片上构筑了多种形貌的银钠米粒子单层结构和三明治结构. 研究了组装膜在不同激发线下表面增强拉曼散射(SERS)的增强差异. 研究结果表明, 单层基底和三明治基底中偶联分子的SERS信号因银纳米粒子间的电磁场耦合而显著增强, 且在三明治结构中增强更加明显. 对复合SERS基底增强因子进行计算可知, 复合SERS基底的表面等离子体共振(SPR)峰与激发线的匹配程度越好, 其增强因子越大. 在三明治结构中更易发生PATP分子转变为对巯基偶氮苯(DMAB)分子的激光诱导催化偶联反应. 另外, 该激光诱导催化偶联反应与激发波长密切相关.     

Ag纳米粒子修饰光纤探针在等离激元催化反应中的应用

本文发展了一种基于Ag纳米粒子(AgNPs)修饰的局域表面等离激元共振(LSPR)光纤探针,作为等离激元催化反应基底同时原位检测表面增强拉曼光谱(SERS)信号,实现反应与检测一体化。本文使用(3-氨基丙基)三甲氧基硅烷(APTMS)分子将AgNPs组装到光纤探针表面。通过调控自组装时间,可形成AgNPs均匀分布的探针。以对巯基苯胺(PATP)作为反应的模型分子,获得了较好的等离激元催化及信号检测效果。在相同光源条件下,从光纤内部激发收集所得产物的SERS信号强度为外部激发收集的12.8倍,表明内激发收集方式在反应及信号检测方面具有优势;在一定浓度范围(10~(-4)–10~(-8)mol·L~(-1))内可用该光纤探针对PATP溶液进行定量分析;运用该光纤探针开展了等离激元催化PATP分子偶联反应的原位动力学研究。该LSPR光纤探针具有较高灵敏度,对样品损伤小,可在多场合下实现原位检测,且制备简便、成本较低。还有望结合近场扫描光学显微技术进一步对样品表面进行微区等离激元催化反应及检测并得到反应的二维分布图。     

金纳米粒子单层膜表面SPR催化反应的原位SERS研究

表面增强拉曼散射（SERS）基底的活性和均匀性是其SERS应用研究的关键,通过气-液两相界面自发组装的方式及控制组装的时间可制备致密性不同的金纳米粒子单层膜（Au MLF）.由于疏松和致密基底表面的LSPR产生的方式和强度不同导致SERS增强效应和均匀性两者无法同时兼顾,通常得到局域表面等离激元共振（SERS）增强性能及表面等离激元共振（SPR）催化性能优异但均匀性欠佳的疏松基底,或SERS增强性能与SPR催化性能中等但均匀性优越的致密基底.研究表明SERS增强效应的提高与粒子密度增加和“热点”活性增加有关,而SPR催化转化率仅与“热点”活性有关.本文以致密的Au MLF为基底,以对巯基苯胺（PATP）和对巯基苯甲酸（MBA）为探针分子系统研究了激光功率对SPR催化反应效率的影响,研究发现激光功率提高可显著提升PATP偶联反应及MBA脱羧反应的转化率.同时发现后者脱羧反应的速率与激光功率平方的倒数成线性关系,为相关表面过程的动力学参数测定提供了新的途径.     

表面增强振动光谱在电催化领域的运用:基本原理、挑战和展望（英文）

随着全球能源结构从化石燃料向可再生能源的快速转变,可再生电力的供应日益丰富.电催化为化学反应提供了新的思路和途径.大多数电催化反应发生在固液界面,但由于溶剂、电解质和带电界面的存在,电催化在本质上比热催化更复杂.因此,电化学界面的表征对于反应机理的研究至关重要.具有表界面选择性的原位表征技术有助于揭示催化剂的构效关系,解析反应机理.其中,表面增强振动光谱,例如表面增强拉曼光谱(SERS)和表面增强红外吸收光谱(SEIRAS),具有超高的表面选择性和化学灵敏度,能够在反应条件下提供表界面物种的指纹信息,原位研究电催化过程.SERS增强效应主要来源于电磁场增强机理和化学增强机理.在电催化体系中,主要以具有表面等离激元效应的SERS基底作为增强源,增强催化剂表面物种的拉曼信号,从而研究反应过程的物种变化.SEIRAS主要利用电磁场增强效应,在电催化体系的运用以衰减全反射模式为主,增强工作电极表面物种的红外吸收信号.相较于SEIRAS, SERS信号不受水溶剂的干扰,并且可以研究低波数区域的振动信号,理解催化剂和吸附物的相互作用.而SEIRAS受益于红外吸收光谱本身信号较强,且增强效应不受限于...     

对氯硝基苯吸附在银纳米粒子上的偶联反应

表面增强拉曼光谱(SERS)具有极高的检测灵敏度, 通过检测吸附分子的SERS信号, 可以获得表面吸附分子的结构以及可能发生的反应. 在拉曼激发光源的辐射下, 在碱性溶液中, 银纳米粒子表面吸附的对氯硝基苯(PCNB)的SERS光谱与其固体的常规拉曼光谱相比, 出现异常SERS谱. 通过采用密度泛函理论(DFT)计算, 对PCNB以及可能的偶联产物p,p''-二氯偶氮苯(DCAB)进行理论分析以及谱峰归属, 发现这些异常峰来自其偶联产物DCAB的偶氮C－N＝N－C基团的基频振动.     

纳米ZnO的表面增强拉曼散射效应来源研究

表面增强拉曼光谱（SERS）的广泛应用源于优良的基底,目前主要局限在粗糙贵金属及胶体纳米颗粒材料.而半导体的光谱高稳定性和再现性,使其成为制备SERS基底的新型材料,但对于其SERS增强机理的研究仍存在极大挑战.本工作以典型的形貌新颖、尺寸均一的扫帚状n型纳米半导体ZnO为SERS基底材料,通过调节激发光的波长和选用具有不同对位取代基的对硝基苯硫酚（PNTP）、苯硫酚（TP）、对氨基苯硫酚（PATP）为探针分子,系统地研究了纳米ZnO的SERS增强行为,估算了其表面增强因子（EF）,分离了化学增强作用中非共振增强效应和电荷转移效应对SERS的贡献.研究表明三种分子在不同激发光作用下的增强因子为10至35,其中PNTP分子约10倍的增强主要来自于因吸附而造成极化率变化的非共振增强效应,TP和PATP分子20~35倍的增强则是由非共振增强效应与光子驱动电荷转移效应共同作用所致,光子能量越高,SERS增强效应越强.且因分子与ZnO间电荷转移的速率较慢导致ZnO表面电荷转移增强效应较贵金属低1~2个数量级.本研究结果为新型半导体SERS基底的制备及调控提供了新思路.     

SPR银金电极上光电化学反应和EC-SERS理论研究

随着纳米科学的发展,人们再次关注到金属电极上的光电化学研究. 这主要得益于币族金属纳米结构具有强的表面等离激元共振（SPR）效应,它能有效地将光从远场光转化为近场光,汇聚光能到金属表面区域,可以在表面产生强的光电场效应,或产生较长寿命的热电子-空穴载流子效应,或是更长时间尺度的热效应. 因此,SPR效应不仅产生了表面增强拉曼散射(SERS)效应,用于表征吸附分子,而且可能诱发表面化学反应,为在电化学界面实现光与电协同调控化学反应提供新思路. 本文首先回顾了金属电极上光电流理论的发展,然后总结了本研究组近年来将量子化学计算用于光电化学反应和SERS光谱研究的工作,并以在银金纳米结构电极上水合质子还原和芳香胺氧化为例,比较了热电子和热空穴参与光电化学反应的特点,揭示了SPR参与光电化学反应的本质.     

电化学表面增强拉曼光谱的量子化学研究

对于在分子水平上研究电化学表面吸附和反应过程,表面增强拉曼光谱(SERS)显示出了其独到的优势,提供了有力的技术方法,但对于其表面增强机理仍有待深入研究.本文总结了将量子化学计算应用于电化学表面增强拉曼光谱(EC-SERS)分析的研究,以电化学界面分子吸附、电化学反应以及光电化学反应的研究体系为模型,提取EC-SERS光谱所蕴藏的物理化学信息.通过对吡啶在电化学表面的吸附、水的吸附及其电化学反应、以及对巯基苯胺的电化学表面催化偶联反应等体系的研究,揭示了电化学表面吸附、反应和光电化学过程的本质.     

金纳米粒子修饰的氨基硅胶整体柱的制备及超灵敏表面增强拉曼散射检测

采用溶胶-凝胶法结合超分子模板技术, 以四乙氧基硅烷(TEOS)和3-氨丙基三乙氧基硅烷(APTES)作为反应前体, 以十六烷基三甲基溴化铵(CTMAB)为超分子模板, 简单快速地制备了一种新型氨基硅胶整体柱, 通过氨基将金纳米粒子组装在整体柱材料孔表面并用于表面增强拉曼散射(SERS)光谱分析. 以对巯基苯胺(PATP)和结晶紫(CV)为拉曼探针, 考察了金纳米粒子修饰的氨基硅胶整体柱用作SERS活性基底的性能. 结果表明, 该整体柱基底具有良好的SERS增强效应, 可检测到的PATP和CV的最低浓度分别为10^-9和10^-11 mol/L. 与金溶胶SERS基底相比, 本文制备的整体柱基底的检测灵敏度显著提高, 并具有良好的信号均一性, 是一种具有现场痕量检测应用潜力的SERS活性基底.     

等离激元激励表面增强拉曼光谱检测技术与仪器

本文总结了近年来基于传播型表面等离激元（Propagafingsurfaceplasmons,PSPs）参与的表面增强拉曼（Surface—enhancedRamanscattering,SERS）技术和仪器方面的研究进展．内容主要包括3部分：（1）基于PSPs激励拉曼散射的装置和技术,包括在消逝场下激发PSPs共振增强拉曼的原理与装置、与表面等离子体共振（Surfaceplasmonresonance,SPR）传感技术的联用及新型结构的长程等离激元激励拉曼技术的研究进展;（2）通过引入局域型表面等离激元（Localizedsurfaceplasmons,LSPs）进一步增强SERS,进而实现PSPs-LSPs共同增强拉曼的超灵敏检测技术,包括在消逝场激发的PSPs基础上,增加纳米粒子实现的PSPs与LSPs共同增强拉曼的原理、装置,以及用该方法进行生物体系的免疫识别检测,此外,还在微纳周期结构上实现了PSPs与LSPs共同激励拉曼;（3）基于PSPs耦合的定向SERS技术,包括在消逝场结构和周期结构上实现SERS定向耦合发射以达到高激发和高收集效率的新技术．     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.