支化PEG-b-PCL嵌段共聚合物的合成

以聚乙二醇甲基丙烯酸酯(PEGMA)为大分子引发剂进行ε-己内酯的酶催化开环聚合, 合成出嵌段共聚物, 然后将其转化成大分子引发剂型单体(Macroinimer), 最后通过原子转移自由基聚合(ATRP)制备出一种新型结构的嵌段型支化聚合物.     

两亲性PS-b-PEG嵌段共聚物刷的合成及响应行为

利用原子转移自由基聚合(ATRP)和点击化学(Click)反应, 在硅基底上制备了聚苯乙烯-b-聚乙二醇(PS-b-PEG)两亲性嵌段共聚物刷. 首先, 利用ATRP方法在表面改性的硅片引发苯乙烯单体(St)的聚合, 得到PS-Br均聚刷, 然后通过叠氮化钠(NaN₃)将均聚刷末端功能化为PS-N₃, 再与炔基聚乙二醇甲醚(Alkynyl-PEG)发生Click反应, 得到PS-b-PEG嵌段共聚物刷. 通过X射线光电子能谱(XPS)和接触角测量仪表征了聚合物刷的表面化学组成和表面亲疏水性质, 证明在硅基底上接枝了嵌段共聚物刷. 用原子力显微镜(AFM)观察了PS-b-PEG嵌段共聚物刷在不同溶剂处理后的形态结构变化, 研究了其响应行为.     

光/温度双响应三嵌段共聚物的合成及溶液自组装行为

以双官能团聚乙二醇(Br-PEO-Br)为引发剂, 利用原子转移自由基聚合(ATRP)制得了含偶氮苯(AZO)和N-异丙基丙烯酰胺(NIPAM)的两亲性三嵌段共聚物P(AZO₉-co-NIPAM₉)-b-PEO₄₈-b-P(AZO₉-co-NIPAM₉), 并通过核磁共振(¹H NMR)和凝胶渗透色谱(GPC)对产物进行了表征. 该共聚物能够在溶液中自组装形成纳米胶束, 运用透射电子显微镜(TEM)、荧光探针技术和动态光散射(DLS)研究了胶束的形貌、粒径及其在光或温度刺激下的响应行为. 结果表明, 该三嵌段共聚物胶束显现出我们以往报道的二嵌段共聚物所不具有的光释放行为: 包覆有尼罗红的胶束在多次紫外-可见光循环照射之后, 荧光强度和初始状态相比下降了大约40%, 说明尼罗红在此过程中逐渐被释放. 胶束的尺寸随着温度的升高而逐渐缩小.     

化学酶法合成五嵌段聚合物及其自组装行为的研究

用酶促开环聚合与ATRP方法相结合,制备了聚甲基丙烯酸六氟丁酯-聚己内酯-聚乙二醇-聚己内酯-聚甲基丙烯酸六氟丁酯(PHFMA-b-PCL-b-PEG-b-PCL-b-PHFMA)五嵌段聚合物.首先用Novozym e 435作为催化剂合成了聚己内酯-聚乙二醇-聚己内酯三嵌段聚合物,然后通过端基官能化法合成了大分子引发剂,并用其引发甲基丙烯酸六氟丁酯(HFMA)的ATRP反应,合成了五嵌段聚合物.通过核磁和GPC证明了大分子引发剂和五嵌段共聚物的结构,五嵌段共聚物的GPC分析表明这种合成方法的可行.共聚物胶束的直径和大小通过动态光散射方法和原子力显微镜测试,五嵌段共聚物在水中的的自组装行为也被研究.结果证明胶束是球形,其平均直径为77 nm.聚合物在四氢呋喃中的浓度对聚合物的聚集形貌有很大的影响.     

一种含假芪型偶氮生色团两亲性嵌段共聚物的合成与表征

利用原子转移自由基聚合（ATRP）合成了一种新型的含假芪型偶氮生色团的两亲性嵌段共聚物P（HEMA-b-6CNAzo）。首先,采用ATRP引发剂引发三甲基硅保护的羟乙基甲基丙烯酸酯（HEMA—TMS）聚合,得到大分子引发剂P（HEMA—TMS）;接着进一步引发单体甲基丙烯酸6-（N_甲基苯胺基）己酯进行ATRP反应,得...     

基于苯氧基联烯的两亲性嵌段共聚物的合成

运用机理转换策略,结合自由基聚合和原子转移自由基聚合(ATRP),制备了含有聚联烯链段的两亲性三嵌段共聚物.设计合成了含有偶氮和ATRP引发基团的双官能团引发剂,先用该双官能团引发剂引发苯氧基联烯单体的自由基聚合,得到了含有ATRP引发基团的聚联烯大分子引发剂,然后该大分子引发剂引发亲水性单体N,N-二乙基氨乙基甲基丙烯酸酯(DEAEMA)的ATRP聚合,制得了聚N,N-二乙基氨乙基甲基丙烯酸酯-聚联烯-聚N,N-二乙基氨乙基甲基丙烯酸酯(PDEAEMA-b-PPOA-b-PDEAEMA).该三嵌段共聚物能在水溶液中形成胶束,通过荧光探针技术分别测定了它在不同离子浓度、不同p H值条件下的临界胶束浓度.实验结果表明,该聚合物胶束的cmc随着p H值增大而减小,随着离子浓度的增大而增大.     

MePEG-b-PCL-b-PDMAEMA的可控合成及性能研究

采用可控开环聚合(ROP)和原子转移自由基聚合(ATRP)相结合的方法制备出一系列单甲氧基聚乙二醇-b-聚(ε-己内酯)-b-聚甲基丙烯酸-N,N-二甲氨基乙酯(MePEG-b-PCL-b-PDMAEMA). 采用核磁(¹H NMR)和凝胶渗透色谱(GPC)研究了聚合物的结构并对聚合物的分子量大小和分布进行了表征. 聚合物的热稳定性能、结晶性能和亲水性能分别由热重分析仪(TGA)、X-衍射仪(XRD)和静态水滴接触角测定. 分别采用荧光光谱法和¹H NMR(以D₂O为溶剂)方法研究了聚合物纳米粒子的形成. 激光光散射(DLS)和透射电镜(TEM)研究结果表明聚合物纳米粒子具有球形结构, 粒子大小在40～70 nm之间并且对外界环境具有pH敏感性能. MePEG-b-PCL-b-PDMAEMA纳米粒子在同时包裹带有正电荷药物以及疏水性药物方面具有潜在的应用前景.     

苯胺四聚体-聚乙二醇-苯胺四聚体嵌段共聚物薄膜的自组装

以氨基封端的苯胺四聚体为基础,以甲苯2,4-二异氰酸酯(TDI)为中间体制备了苯胺四聚体-聚乙二醇-苯胺四聚体(ANI₄-PEG-ANI₄,PEG600,M_n＝600)嵌段共聚物,并溶于乙醇/N,N-二甲基甲酰胺(DMF)混合溶剂后,涂覆于导电玻璃(ITO)表面制备成薄膜,利用原子力显微镜(AFM)、紫外-可见光谱(UV-Vis)和循环伏安(CV)等研究了薄膜的自组装及电化学行为等,讨论了诱导溶剂对嵌段共聚物薄膜形态和性能的影响. 研究发现,通过改变混合溶剂比和诱导溶剂种类,ANI₄-PEG-ANI₄嵌段共聚物薄膜可以实现多种形态的转变.     

聚赖氨酸为主链的牙刷状分子刷的可控合成

设计合成了溴基功能化的赖氨酸单体(Br-lys)并通过关环反应制备了对应的溴代L-赖氨酸N-羧酸酐(Br-Lys-NCA)单体.利用过渡金属引发剂Ni(COD)depe调控的NCA活性开环聚合和顺序添加单体的方法,得到了组成和结构明确的聚(ε苄氧羰基L-赖氨酸)-b-PBrLL(PZLL-PBrLL)两嵌段共聚肽.利用PZLL-b-PBrLL两嵌段共聚肽为大分子引发剂,通过ATRP引发甲基丙烯酸寡聚乙二醇酯(EGMA),合成了以聚赖氨酸为骨架的牙刷状分子刷.研究发现PZLL-PBrLL两嵌段在四氢呋喃中形成α-螺旋结构,螺旋度随着PBrLL链段的增长而降低,而PZLL-b-(PBrLL-g-PEGMA)形成部分α-螺旋构象,螺旋度随侧链PEGMA增长而减小.     

原子转移自由基聚合(ATRP)在二氧化硅表面接枝中的应用

ATRP方法是在二氧化硅(SiO2)表面接枝聚合物的一种有效方法.通过硅烷偶联剂把ATRP引发剂键接到SiO2表面,然后进行表面ATRP聚合,可以在SiO2表面接枝各种均聚物、嵌段共聚物、超支化聚合物.聚合可以在有机溶剂或水中进行.把ATRP方法同其它聚合方法如氮氧稳定自由基聚合或开环聚合相结合,可以在SiO2表面接枝复杂结构的聚合物如V型嵌段共聚物、梳型共聚物等.SiO2表面ATRP聚合可以通过外加引发剂或外加二价铜来实现聚合可控.     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.