六元卟啉Hexaphyrin(1.1.1.1.1.1)的Pd(Ⅱ)金属配合物光电性质的理论研究

通过密度泛函和含时密度泛函方法对六元卟啉的钯金属配合物进行了系统的研究,探讨了几种金属配合物光学性质的变化.对于具有26π电子体系3个单金属配合物在Q带的最大吸收峰顺序为λmax(D26Pd)>λmax(R26Pd)>λmax(M28Pd),这同它们的ΔEH-L成反比.其中D26Pd和M28Pd的跃迁来自于π→π*的ILCT的跃迁,而R26Pd有部分金属d轨道参与到跃迁,跃迁性质为ILCT/MLCT.它们的B带的强吸收峰同自由状态下的配体的吸收光谱比较,配合物的吸收峰发生了约20nm左右的蓝移,吸收主要贡献都是来自于d(metal)→π*的MLCT的跃迁.非芳香性配合物M28Pd2α的跃迁性质则不同,无论是Q带还是B带都没有发现金属的参与,而且吸收强度明显降低.     

马来腈二硫纶·邻菲咯啉镍(II)配合物的电子光谱和理论研究

测量了标题配合物Ni(mnt)(phen)在多种介质中的电子吸收光谱和发射光谱, 使用密度泛函理论的B3LYP方法和分子轨道理论的PM3方法研究了其气态分子几何构型、电子结构和成键, 用ZINDO/S方法通过多组态的组态相互作用(CI)计算解释了实验光谱. 结果表明: 该配合物分子为平面结构, 对称性属于点群C_2v, 基态为自旋三重态, 配位键Ni—N和Ni—S为典型的共价结合, Ni的3d电子反馈效应较显著; 可见区的吸收带和发射带(对应于基态电子组态到较低能量激发态组态的跃迁)本质上属于配体phen到mnt^2－的荷移跃迁(LL'CT), 紫外区的吸收带本质上属于配体的π→π*跃迁.     

一类混配型钌苯配合物的手征光学特性

手性钌配合物反应机理及手性构性关系的理论研究是一个重要课题。本工作中,用密度泛函方法研究了一类混配型钌苯配合物[RuBen(PPh₃)₂(Phen)(L-Cys)]²⁺(Phen=菲咯啉,L-Cys=L-半胱氨酸)的几何构型、电子结构和手征光学性质。计算拟合的电子圆二色(ECD)谱的峰形、符号与相对强度均与实验谱图吻合。各手征结构单元中,八面体内核的Λ/Δ-构型主导ECD曲线的分布,螯合环L-Cys的λ/δ折叠只影响吸收带的相对强度,而R/S手性碳的贡献极小。340 nm以上的吸收带由π→π*跃迁主导,混有部分Ru中心的d→d成分。340 nm以下有一强一弱2对谱带,分属于典型和非典型的激子耦合。二者对Λ-构型均表现为正的手性激子裂分。该特征可作为指认类似配合物绝对构型的参考判据。此外,通过与混配型无机钌配合物比较,讨论了二者手征光学特性的异同。     

8-羟基喹啉铝光电性质的Ab initio和DFT研究

利用abinitioHF和密度泛函理论B3LYP等方法,对金属有机配合物8-羟基喹啉铝(AlQ₃)进行几何结构优化,探索分子内部电子跃迁的机理.结果表明,电子从基态跃迁到低激发态时主要为π-π^*跃迁;电荷从含氧的苯酚环转移至含氮的吡啶环上,包括两环之间C→C转移和O→N转移,与金属离子关系不大.考虑到配体对发光性质的贡献,进一步设计了3种AlQ₃的衍生物.     

齐聚苯胺修饰的三联吡啶铁配合物的合成及其光谱和电化学性质

合成了一系列齐聚苯胺修饰的三联吡啶铁配合物,研究了齐聚苯胺链长、不同取代基等对配合物光谱性质和氧化还原性质的影响。 结果表明,相对于配合物[Fe(TPY)₂]²⁺(TPY:三联吡啶),供电子齐聚苯胺单元的引入,使得修饰基团与配合物中心核[Fe(TPY)₂]²⁺之间形成了强的D-A体系,导致配合物¹MLCT吸收波长显著红移至594 nm,且摩尔吸光系数增加近5倍。 配合物同时具有基于金属中心、三联吡啶配体和齐聚苯胺单元的多个氧化还原过程,强拉电子取代基使齐聚苯胺单元氧化还原峰简并且峰电势明显正移,而正丁基取代基对氧化还原峰电势的影响较小。     

不对称五氮齿类卟啉镉的合成及电子吸收光谱特性研究

本文报道几种不对称类卟啉镉(Ⅱ)配合物的合成及其结构表征,并对其电子吸收光谱特性进行了研究。结果表明,这类配合物的0-0跃迁在λ_max>690nm有一个允许跃迁的强吸收带,且随π电子数及取代基的不同有着明显差别;在强极性溶剂中,该类配合物可发生H聚集;将跃迁能量、振子强度等性质与取代基Hammett常数进行线性相关,揭示了取代基效应对0-0跃迁的影响规律。     

g-CN体系的准粒子能带结构和光学特性

利用多体格林函数理论,本文研究了二维CN体系(包括triazine和tri-s-triazine)的激发态特性。通过GW方法,我们计算了准粒子的能量。考虑电子-空穴相互作用,通过求解Bethe-Salpeter方程,我们获得了激发态能量和光谱。我们发现,在这两种CN体系的价带中,σ轨道和π轨道之间的交换作用非常强烈。由于占据的σ轨道和π轨道之间的准粒子修正量非常不同,因此,为了得到准确的带隙值和光谱,我们需要对这两种轨道开展精确的GW计算。与单层的CN体系相比,双层结构中层与层之间的范德华相互作用使带隙值降低了0.6 eV,而光吸收谱红移了0.2 eV,这是由于双层结构具有更小的激子束缚能。我们计算的吸收峰的位置与实验结果符合很好。实验中的吸收峰主要是由深能级的π轨道到π^*轨道的跃迁形成的。π→π^*跃迁和σ→π^*跃迁之间的耦合能够在长波长范围产生弱的吸收尾巴,如果调整入射光的极化方向,由σ→π^*跃迁产生的高强度的吸收峰将会在更低能量处出现。     

联吡啶钌配合物[Ru(Htcterpy)X3]3-[X=NCS,CN,Cl]的电子结构和光谱性质的理论研究

利用DFT中的B3LYP方法优化了3个联吡啶钌配合物[Ru(Htcterpy)X3]3-[tcterpy=4,4',4"-tricarboxy-2,2'∶6',2"-terpyridine, X=NCS(1), CN(2), Cl(3)]的基态几何结构, 得到的几何参数与实验结果吻合得很好. 采用TD-DFT方法, 得到了配合物1~3在气态和溶液(乙醇溶液和水溶液)中的激发态电子结构和电子吸收光谱. 利用SCRF方法中的CPCM模型来模拟溶剂化效应. 研究结果表明, 配合物1~3在气态和溶液中的吸收跃迁性质相似, 低能吸收均被指认为MLCT和LLCT的混合跃迁, 高能吸收均被指认为三联吡啶配体内的π→π*跃迁. 溶剂化效应使配合物1~3在溶液中的吸收光谱蓝移.     

离子对间电荷转移配合物：阴离子…π作用及近红外吸收（英文）

合成并表征了一种离子对配合物1,[Cl2Bz-1-Apy]2[Ni（mnt）2],其中,Cl2Bz-1-Apy为（E）-1-（3,4-二氯苯亚甲基氨基）吡啶一价阳离子,mnt是马来二睛基二硫烯二价阴离子。在配合物1的晶体中,阴离子和阳离子中吡啶环之间存在阴离子…π相互作用。DFT电荷密度分布分析表明,阴离子…π相互作用主要源自离子对间的Coulomb吸引力。在固体和乙腈溶液电子吸收光谱近红外区,配合物1都有一个宽的弱吸收带,该吸收带可归属为二价阴离子[Ni（mnt）2]2-内的d-d电子跃迁和阴阳离子对间的电荷转移跃迁。     

(2-羧基苯氧基)苯-1,2-二羧酸构筑的镧系配合物对苯甲醛和阳离子的荧光传感

采用水热法合成了5个稀土配合物[Sm₂(bdbc)₂(phen)₄](1)和[Ln(bdbc)(phen)(H₂O)][Ln=Eu(2), Gd(3), Tb(4), Dy(5), bdbc=(2-羧基苯氧基)苯-1,2-二羧酸根, phen=1,10-邻菲啰啉]. 配合物1是双核分子, 通过氢键和C—H…π作用进一步构筑成一维超分子结构; 配合物2~5是同构的一维双螺旋结构, 通过氢键和C—H…π作用进一步构筑成三维超分子结构. 配合物1, 2, 4和5呈现了Sm³⁺, Eu³⁺, Tb³⁺和Dy³⁺离子的特征发射, 分别对应于Sm³⁺离子的⁴G_5/2→⁶H_J/2(J=5, 7, 9)、 Eu³⁺离子的⁵D₀→⁷F_J(J=1—4)、 Tb³⁺离子的⁵D₄→⁷F_J(J=6, 5, 4, 3)和Dy³⁺离子的⁴F_5/2→⁶H_J/2(J=15, 13)跃迁. 对配合物4的荧光性质进行了表征, 结果表明, 配合物4可用作荧光探针以检测阳离子和苯甲醛.     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.