乙醇浸渍对Co/SBA-15费托合成催化剂性能的影响

采用等体积浸渍法分别以乙醇和水为溶剂制备了Co/SBA-15催化剂,通过N2物理吸附、X射线衍射和程序升温还原等方法对催化剂进行了表征,并在固定床反应器中评价了催化剂的费托合成反应性能.结果表明,乙醇浸渍制备的催化剂钻粒子尺寸较小,金属钻分散度较高,钴粒子与载体之间的相互作用较强,还原温度较高,其费托合成反应活性和高碳烃选择件高十水溶液浸渍制备的催化剂.     

浸渍钠对铁基催化剂F-T合成浆态床反应性能的影响

以FeCuK/Si O2为母体催化剂,通过乙酸钠浸渍得到一组不同Na含量的费托合成铁基催化剂.采用原子发射光谱、低温N2吸附、程序升温还原和M ssbauer谱等技术对催化剂进行了表征.在H2/CO摩尔比为0.67,空速为2 000 h-1,压力为1.5 MPa和温度为250℃的条件下进行了浆态床F-T合成反应性能评价实验.结果表明,浸渍少量Na能提高催化剂的比表面积,促进铁物相的分散,而浸渍大量Na却大大降低了催化剂的比表面积,使催化剂中的铁物相聚集形成较大的颗粒;浸渍Na抑制了催化剂在H2中的第一步还原,但促进了催化剂在CO中的碳化;在原位合成气还原过程中,浸渍Na有利于催化剂的碳化.在500 h的运行实验中,浸渍Na的催化剂均表现出不同程度的失活现象.反应结果表明,浸渍Na对水煤气变换反应活性影响不大,对费托合成反应活性和烃产物选择性有较大的影响.在铁基催化剂上浸渍Na有利于C12 重质烃和低碳烯烃的生成.     

Pt单层修饰Pd/C氧还原催化剂

分别利用液相热解法和浸渍还原法制备了碳载钯纳米催化剂（Pd/C）,并研究了其对氧还原反应的电催化活性。与浸渍还原法相比,液相热解法得到的Pd/C催化剂虽然粒径较大,但表现出较好的氧还原反应（ORR）活性和稳定性.在所制备的Pd/C催化剂基础上,通过置换欠电势沉积的Cu原子单层,获得了Pt单层修饰的Pd/C催化剂,其ORR活性较Pd/C催化剂有显著提高,且与纯Pt/C催化剂接近,而其耐久性则较纯Pt/C催化剂有显著提升,显示出Pt单层催化剂的潜在优势.     

纳米Au/TS-1催化剂的制备及用于甲醇羰基化体系

采用负压沉积沉淀法、等体积浸渍法、负压等体积浸渍法等方法制备了纳米Au/TS-1催化剂,研究了深床焙烧和等离子体焙烧,以及焙烧温度和焙烧气氛对催化剂中纳米金粒子大小和催化性能的影响,并采用ICP、TEM、XRD、UV-vis、XPS对催化剂金粒子进行了物化性能表征,采用甲醇羰基化制乙酸甲酯反应表征催化性能.结果表明,不同制备方法、不同焙烧方法、不同焙烧温度和焙烧气氛对负载型纳米Au/TS-1沸石分子筛催化剂中金粒子的大小、形貌、物化性质和催化性能有明显影响.其中,3种制备方法中,氢气气氛下焙烧均比空气和氮气气氛下焙烧得到的催化剂的金粒子尺寸更小,分散更均匀,约为5~10 nm.与其它方法相比,负压沉积沉淀法可制得分散更均匀的金粒子,Au/TS-1沸石催化剂中的金粒子尺寸更小,平均粒径为1~5 nm.催化性能评价结果显示,3种方法制备出的负载型金催化剂用于催化甲醇羰基化制乙酸甲酯反应体系中,甲醇的转化率分别为85%、75%、60%,乙酸甲酯选择性可高达68%,反应温度200℃为最好.     

Au/CeO2/SiO2催化CO低温氧化反应过程中CeO2的作用（英文）

采用具有分等级孔道结构的SiO2(HMS)为载体,通过润湿浸渍引入少量CeO2,经焙烧得到CeO2/HMS复合载体,然后采用沉积沉淀法负载上Au纳米粒子,得到Au/CeO2/HMS三元复合催化剂.通过X射线衍射、程序升温还原和原位红外光谱等手段表征了催化剂的结构.结果表明,CeO2的存在可控制Au颗粒的沉积并稳定载体上的纳米Au颗粒.Au/CeO2/HMS上CO低温氧化反应完全转化温度为60oC.高度分散的Au0可以活化CO,CeO2颗粒则可以提供反应需要的氧.稳定性测试结果显示,反应48h催化剂活性维持不变.     

Au/CeO_2/SiO_2催化CO低温氧化反应过程中CeO_2的作用(英文)

采用具有分等级孔道结构的SiO2(HMS)为载体,通过润湿浸渍引入少量CeO2,经焙烧得到CeO2/HMS复合载体,然后采用沉积沉淀法负载上Au纳米粒子,得到Au/CeO2/HMS三元复合催化剂.通过X射线衍射、程序升温还原和原位红外光谱等手段表征了催化剂的结构.结果表明,CeO2的存在可控制Au颗粒的沉积并稳定载体上的纳米Au颗粒.Au/CeO2/HMS上CO低温氧化反应完全转化温度为60oC.高度分散的Au0可以活化CO,CeO2颗粒则可以提供反应需要的氧.稳定性测试结果显示,反应48h催化剂活性维持不变.     

负载酞菁铁的氮掺杂中空碳球的电催化氧还原性能（英文）

开发低成本、高性能的氧还原反应（ORR）催化剂是当前的研究热点.虽然酞菁铁（FePc）在几十年前就被证明能高效地电催化氧还原反应,但由于其电子传导性和稳定性较差,无法取代商用的Pt/C催化剂.氮掺杂碳材料不仅化学性质稳定、电子传导性好,还有一定的氧还原催化活性.本文首先制备了聚苯乙烯@聚多巴胺球前驱体,经过高温碳化后制得了氮掺杂中空碳球,进而负载酞菁铁后制备了负载酞菁铁的氮掺杂中空碳球复合材料（FePc-NHCS）.通过调整煅烧温度和酞菁铁的负载量,可进一步调控FePc-NHCS的多孔结构、石墨化程度、氮掺杂的种类与含量及酞菁铁的负载状态.优化后的FePc-NHCS在碱性电解质中显示出优异的ORR催化活性,其半波电位和稳定性均高于商用Pt/C催化剂.研究结果表明,掺杂与复合是增强单项催化组分活性的有效途径.此外,通过调控催化剂的结构和组分也能有效地优化催化剂的氧化还原性能.     

α,β-不饱和酸多相不对称氢化反应中的钯粒径和载体酸性效应（英文）

使用胶体沉积法制备了具有不同钯粒径、不同氧化物载体的负载型钯催化剂,系统地研究了α,β-不饱和酸的多相不对称氢化反应中的钯粒径和载体效应.结果表明钯粒径仅影响反应的活性而与对映体选择性无关.这是由于在较小的钯粒子上存在较多的边,角等区域,而这些区域具有较高的双键加氢活性,因而在较小的粒子上具有较高的氢化反应速率但是粒径的变化并没有改变手性修饰剂与反应中间体的吸附模式.载体的酸性对反应的活性和对映体选择性都有促进作用,说明酸性载体有利于反应中间体的吸附.     

制备方法对 Ni-Al2O3催化剂在 CO2-CH4重整反应中 催化性能的影响

为提高镍基催化剂的干法重整活性,采用溶液燃烧法、等体积浸渍法、胶体磨循环浸渍法和水热-沉积法制备了SCM、IMP、T310和HTP四种催化剂,在800 ℃考察了其在CO₂-CH₄重整反应中的催化性能,并结合ICP-AES、N₂吸附-脱附、XRD、H₂-TPR和TEM等表征手段对催化剂进行分析。结果表明,水热-沉积法和胶体磨循环浸渍法制备的催化剂比表面积较大,分别为190.83和182.21 m²/g,可为反应提供较多的接触面积,进而提高催化剂的初始活性(HTP试样CH₄和CO₂初始转化率相对较高,分别达85.15%和90.84%);而溶液燃烧法和等体积浸渍法制备的催化剂具有较多的NiAl₂O₄尖晶石,其还原峰面积占总还原峰面积90%以上,还原后可获得更多晶粒粒径更小的稳定活性组分Ni(SCM和IMP试样稳定性更好,反应50 h后活性超过HTP和T310试样,100 h后CH₄转化率方降至50%以下)。因此,决定催化剂稳定活性的更重要的因素应该是活性组分Ni晶粒粒径的大小及其抗烧结能力的强弱。     

还原-氧化预处理对双孔道钴基催化剂催化性能的影响

以双介孔分布MCM-41分子筛为载体,采用等体积浸渍法制备了钴基催化剂,并考察了还原-氧化预处理方式对催化剂结构及费托合成催化性能的影响。新鲜催化剂经预处理之后,XRD结果显示钴物种主要以单质钴形式存在,且主要以面心立方钴晶型出现,晶粒粒径由原来的8.4nm增加到22.6nm,由于晶粒粒径的增大,拉曼峰呈现蓝移特征。SEM及TEM表征表明,预处理后催化剂中钴物种在载体中有较好的分散性。H₂-TPR结果表明,新鲜催化剂经还原-氧化预处理后钴物种的还原温度降低,钴物种-载体间作用力增强。费托合成反应结果显示,经预处理后催化剂较新鲜催化剂活性低,甲烷选择性提高,但C_5~18的选择性明显提高,尤其是C_5~11的选择性可达到新鲜催化剂的两倍。     

Dichroism of absorption and polarization of phosphorescence of molecules of the closed form of nitrobenzospirothiopyran

The spectral-polarization characteristics of absorption and phosphorescence of molecules of the initial form of nitro-substituted indolinospirobenzothiopyran were studied in oriented polyethylene films and in solutions with different polarity. An oscillator model of the electron transitions responsible for the formation of absorption and luminescence spectra was suggested. It was established that the principal differences in the spectral and photophysical properties of the compound studied and its oxygen-containing analog are associated with the fact that the electronegativity of the S atom is lower than that of the O atom. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 6, pp. 1143–1146, June, 1997.     

非那雄胺合成工艺改进

非那雄胺能抑制5α-还原酶的活性,明显降低二氢睾酮水平,是一种治疗良性前列腺增生的有效药品。该合成工艺以甾烯酮酸为原料,将其与氯化亚砜反应,无须分离即与叔丁胺反应得17β-酰胺化合物,再氧化开环,环合,氢化,脱氢合成了非那雄胺。经元素分析、IR、1HNMR、13CNMR、MS分析表征了其结构。该法无须使用昂贵的2,2-二吡啶二硫化物和剧毒药品苯亚硒酸酐,且以乙酸铵代替氨气,降低了对设备的要求和腐蚀,更适用于工业生产。     

Determination of heats of detonation and influence of components of composite explosives on heats of detonation of high explosives

The heats of detonation of 20 simple high explosives and explosive mixtures were determined by means of an adiabatic detonation calorimeter designed by the authors. The results indicated that the performance of the instrument was reliable and the experimental data were very accurate. For explosive mixtures, there was a linear accumulative relationship between the heats of detonation of the explosive mixture and its components. Accordingly, the heats of detonation of explosive mixtures could be calculated directly from the heats of detonation of simple explosives and the characteristic heats of other components. The experiments showed that the gold or brass shell of the cylindrical charge could be substituted by a thick-walled porcelain shell, which had the advantage of cheapness.

     

Synthesis of phenolic components of Grains of Paradise

Two vanilloids, (5E)-8-(4-hydroxy-3-methoxyphenyl)oct-5-en-4-one (1) and 4-[3-hydroxydecyl]-2-methoxyphenol (2), isolated from the dried seeds of Grains of Paradise (Aframomum melegueta), were synthesized; the latter compound was made as the S-enantiomer and the material derived from the seeds was found to be a 1:1.7 mixture of the R and S isomers. The synthetic route used should allow the preparation of analogs having extended alkyl chains and consequently different lipophilicity, and 3, a homolog of 2, was also prepared.     

Summary of development of the theory of stability of colloids and thin films

In this review, the research of the author in the field of colloidal systems is summarized. The factors influencing colloidal stability are systematized and analyzed. Examples are presented to illustrate the practical utilization of the theory of stability of colloids and thin films.This review was prepared on the basis of the works of the author, which were awarded the State Premium for 1991 in the field of science and technology, chemistry section.Institute of Physical Chemistry, Russian Academy of Sciences, 117915 Moscow. Translated from Izvestiya Akademii Nauk, Seriya Khimicheskaya, No. 8, pp. 1708–1717, August, 1992.     

Study of hydration of two cements of different strengths

Main hydration products of two cement pastes, i.e. CSH-gel, portlandite (P) (and specific surface S) were studied by static heating, and by SEM, TEM and XRD, as a function of cement strength (C-33 and C-43) hydration time (th) and subsequent hydration in water vapour.Total change in mass on hydration and air drying, M_o, increased with strength of cement paste and with hydration time. Content of water escaping at 110 to 220°C, defined as water bound with low energy, mainly interlayer and hydrate water, was independent on cement strength but its content increased with (th). Content of chemically bound (zeolitic) water in CSH-gel, escaping at 220-400°C, was slightly dependent on strength and increased with (th). It was possibly derived from the dehydroxylation of CSH-gel and AFm phase. Portlandite water, escaping at 400-500°C, was independent on cement strength and was higher on longer hydration. Large P crystals were formed in the weaker cement paste C-33. Smaller crystals were formed in C-43 but they increased with (th). Carbonate formated on contact with air (calcite, vaterite and aragonite), decomposed in cement at 600-700^oC. It was high in pastes C-33(1 month) and C-43(1 month), i.e. 5.7 and 3.3%, respectively; it was less than 1% after 6 hydration months (low sensitivity to carbonation) in agreement with the XRD study showing carbonates in the air dry paste (1month), and its absence on prolonged hydration (6 months) and on acetone treatment. Water vapour treatment of (6 months) pastes or wetting-drying increased this sensitivity.Nanosized P-crystals, detected by TEM, could contribute to the cement strength; carbonate was observed on the rims of gel clusters.This revised version was published online in November 2005 with corrections to the Cover Date.     

氯氧化镁生成热的研究

用氧化镁氯化镁水溶液制备了8水合氯氧化镁[nMg(OH)2·MgCl2·8H2O], 并测定了其在盐酸中的溶解热, 实验结果表明, 氯氧化镁溶解热与n值呈线性关系, 根据溶解热求出5Mg(OH)2·MgCl2·8H2O和3Mg(OH)2·MgCl2·8H2O的生成热分别为-7727.1和5888.1kJ·mol^1^-。     

Thermodynamics of the formation of oxosulfides of rare-earth elements

The enthalpies of solution of several oxosulfides of rare-earth elements and the high-temperature enthalpies of oxosulfides and oxosulfates of lanthanum and yttrium were measured using solution calorimetry and high-temperature microcalorimetry techniques. Standard enthalpies of formation and some thermodynamic properties of oxosulfides and oxosulfates were calculated. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 2 pp. 294–297, February, 1997.     

探究“铁的锈蚀条件”实验创新设计

设计了铁的锈蚀实验,说明了铁钉的处理方法,增加了温度、酸、碱的影响条件,实现了铁跟蒸馏水及空气中氧气快速反应而生锈,使实验在5 min左右就能够得到准确的结果。