共查询到20条相似文献,搜索用时 8 毫秒
1.
S. Schwarz H. -M. Buchhammer K. Lunkwitz H. -J. Jacobasch 《Colloids and surfaces. A, Physicochemical and engineering aspects》1998,140(1-3):377-384
In order to describe the influence of cationic polyelectrolytes on flocculation of disperse systems the adsorption of poly (diallyldimethylammonium chloride) (PDADMAC) onto silica, mica and acidic polymer latex was investigated. The plateau value of the adsorption isotherms grows with increasing surface charge density of the substrates and electrolyte concentration. The adsorbed layer of the polycation was characterized by zeta potential measurements with KCl solutions of constant ionic strength and varied pH. The zero point of the charge as well as the shape of the zeta potential–pH plot depends on the coverage of the surface with polycations. For fully covered substrates the zero point of the charge as well as the pKA and pKB values calculated by a stochastic search programme are independent of the substrate. Maximum flocculation was observed at about 30% of the plateau value of the adsorption isotherms. 相似文献
2.
《印度化学会志》2023,100(2):100880
p-sulfonatocalix [8]arene and chitosan based supramolecular amphiphilic vesicles were formed by electrostatic interaction between anionic character of calixarene and cationic chitosan molecules. UV–visible, fluorescence, dynamic light scattering and thermogravimetric analysis were performed for the characterization of p-SCX8 with chitosan. Increase in absorption and enhancement of fluorescence emission intensity attributed to vesicle formation between both calixarene and chitosan in aqueous media. Results obtained from size distribution curve of dynamic light scattering experiment gives clear evidence for vesicle formation at pH 4.98. Positive zeta potential values obtained from dynamic light scattering experiment gives the evidence for vesicle formation. Thermogravimetric analysis gives quantitative results for purity and stability of the vesicles. From overall studies we can conclude that degree of deacetylation as well as pH 4.98 of the solutions and anionic nature of pSCX8 plays important role in electrostatic interaction of vesicle formation. 相似文献
3.
An influential subject of research is the use of lignin for effective removal of hazardous dyes from wastewater effluents utilizing green techniques. Lignin makes up to 10–25% of lignocellulosic biomass. In this study, a solvent evaporation approach was employed to construct a novel chitosan lignin membrane, which was then used to remove the methylene blue (MB) dye from water. The physicochemical, thermal, and morphological attributes were characterized by SEM, XRD, FTIR ATR, and TGA DSC. With higher lignin content in the membrane, its tensile strength was reduced. The dye was removed 95% of the time by the membrane, and the adsorption followed the Langmuir isotherm. The membranes could be recycled up to five times. 相似文献
4.
T. Danno H. Matsumoto M. Nasir S. Shimizu M. Minagawa J. Kawaguchi H. Horibe A. Tanioka 《Journal of Polymer Science.Polymer Physics》2008,46(6):558-563
The fine structure of poly(vinylidene fluoride) (PVDF) nanofiber prepared by electrospray deposition (ESD) has been investigated by wide angle X‐ray diffraction (WAXD) and infrared spectroscopy (IR). The β‐phase crystal was dominant in the crystalline region. The degree of crystallinity of 0.54 for the nanofiber, determined by Ruland's method, was almost identical to that for a melt pressed sheet of PVDF. The disorder parameter k was 4, which is significantly smaller than the value of 6 for the melt pressed sheet of PVDF. Molecular orientation along the fiber axis was observed by the polarized infrared spectra of the uniaxially aligned nanofiber. These results suggest that the PVDF nanofiber possesses a fiber structure which is by no means inferior to that of practical fibers. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 558–563, 2008 相似文献
5.
Muhamad Nasir Hidetoshi Matsumoto Tetsuya Danno Mie Minagawa Toshihira Irisawa Masatoshi Shioya Akihiko Tanioka 《Journal of Polymer Science.Polymer Physics》2006,44(5):779-786
Poly(vinylidene fluoride) (PVDF) nanofibers were prepared by electrospray deposition (ESD). To control the diameter, morphology, and structure of PVDF nanofibers, some parameters were investigated, such as polymer concentration, nozzle‐to‐ground collector distance, feeding rate of the polymer solution, and applied voltage. The fabricated fiber was 80–700 nm in diameter. The increase in the polymer concentration caused an increase in the polymer viscosity and fiber diameter. At low polymer concentration (5 wt %), polymer nanoparticles were formed. An increase in applied voltage will increase the fiber diameter. Variation in the nozzle‐to‐ground collector distance did not result in significant changes in the fiber diameter. Increase in the feeding rate of the polymer solution decreased the fiber diameter. Differential scanning calorimetry (DSC) and wide angle X‐ray diffraction (WAXD) measurements showed that the melting point and total crystallinity were decreased. Fourier transform infrared spectroscopy (FTIR) measurement revealed that ESD process induced the formation of the oriented β‐phase PVDF structures. It was also demonstrated that the addition of hydrofluorocarbon solvent to polymer solution remarkably enhanced the formation of β‐phase crystalline structure of PVDF nanofiber. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 779–786, 2006 相似文献
6.
Treatment of oxidized cellulose fabric with chitosan and its surface activity towards anionic reactive dyes 总被引:5,自引:1,他引:4
Yupaporn Kitkulnumchai Anawat Ajavakom Mongkol Sukwattanasinitt 《Cellulose (London, England)》2008,15(4):599-608
The surface modification of cellulose fabric with chitosan was achieved through an oxidation of the fabric with KIO4 followed by reductive ammination with chitosan. The chitosan content in the fabric determined by Kjeldahl nitrogen analysis
technique was 1.69%. The scanning electron micrograph revealed submicron particles of chitosan attached on the fabric surface.
Dyeing of the modified fabrics with mono-chloro-triazine and vinyl sulfone anionic reactive dyes, showed vastly improved exhaustion
and color yield (K/S) indicating that this method of surface modification is effective for changing surface activity of the
fabric. The enhancement of the dye uptake brought about an improved dyeing process in which the dye and salt used could be
reduced by half and 14%, respectively. A Significant drop in burst strength upon the oxidation but no discernable adverse
color fastness property was observed for the chitosan-modified fabric. 相似文献
7.
《Arabian Journal of Chemistry》2021,14(12):103455
In contemporary times, water resources have become increasingly scarce and suffer from anthropogenic pollution sources with an organic and inorganic origin that are products of industrial, agricultural, and everyday waste. Contamination with heavy metals and dyes in wastewater is considered a risk for water sources that can leak into underground and surface sources, leading to increased biological and chemical contamination. The pollutant removal process is performed by adsorption treatment methods, which is the most common method, and it is considered an effective method with a high and economical removal rate.In this review, we discuss the use of biobased hydrogel adsorbents in the removal of organic dyes and metal ions from water. The literature indicates that hydrogels exhibit rapid absorption kinetics and a dye removal absorption capacity that can reach more than 100 mg/g and sometimes more than 2000 mg/g, with a metal adsorption capacity ranging from 38 mg/g to more than 440 mg/g. These results are discussed and compared by taking into account hydrogel materials that contain biopolymers such as alginate, chitosan or both. In general, absorption depends mainly on biobased materials, which have a natural origin and can be utilized to synthesize hydrogels to remove pollutants, dyes and heavy metals. Chitosan and alginate are prominent materials for this use and they can be incorporated with other components to obtain hydrogels or nanocomposite materials with different efficacies to remove dyes and metal ions. 相似文献
8.
In this study, the aim is to describe the influence of electrospinning parameters on the morphology, the water wetting property and dye adsorption property of poly(methyl methacrylate) nanofiber mats. Specifically, the effects of solution concentration, solvent type, applied voltage, distance between the electrodes and particulate reinforcement on the diameter and shape of the nanofibers were investigated. All poly(methyl methacrylate) nanofiber mats contained beaded nanofiber structures. With increasing the polymer solution concentration, the average fiber diameter also increased. Poly(methyl methacrylate) nanofiber mat electrospun from dimethylformamide solution resulted in thicker fibers when compared with the mat electrospun from acetone solution. Increasing the electric potential difference between the collector and the syringe tip did not increase the average fiber diameter. Besides increasing the distance between the electrodes resulted in a decrease in the average fiber diameter. When compared with PMMA nanofiber mat, thicker fibers were obtained with silica nanoparticles reinforced nanofiber mat. According to the water contact angle measurements, all poly(methyl methacrylate) nanofiber mats revealed hydrophobic surface property. PMMA nanofiber mat with the highest water contact angle gave rise to the highest dye adsorption capacity. 相似文献
9.
Youngwoo Choo Hanqiong Hu Kristof Toth Chinedum O. Osuji 《Journal of polymer science. Part A, Polymer chemistry》2016,54(2):247-253
The delivery of sub-micron droplets of dilute polymer solutions to a heated substrate by electrospray atomization enabled precisely controlled and continuous deposition, or growth, of block copolymer thin films. It also provided, in principle, the ability to fabricate heterolattice materials using sequential depositions. This possibility was explored and the morphology of resulting composite films produced by such sequential electrospray deposition (ESD) of lamellar diblock copolymers of poly(styrene-b-4-vinylpyridine) with differing molecular weights was examined. The structure of the heterolattice interface was a strong function of temperature. Sharp interfaces with abrupt changes in the lamellar period were observed at lower deposition temperatures, while higher temperatures produced a smooth variation in the lamellar period from one molecular weight to the next. The ordering kinetics of a secondary high molecular weight layer could be substantially enhanced depending on the molecular weight of the polymer present in the underlying primary layer. These findings were discussed in the context of temperature and molecular weight dependent diffusion dynamics of the polymers in the melt which control the inter-mixing of the layers and therefore the structure of the heterolattice interface. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016, 54, 247–253 相似文献
10.
Physicochemical characterization of chitosan nanoparticles: electrokinetic and stability behavior 总被引:1,自引:0,他引:1
López-León T Carvalho EL Seijo B Ortega-Vinuesa JL Bastos-González D 《Journal of colloid and interface science》2005,283(2):344-351
Some physical properties of nanogel particles formed by chitosan ionically cross-linked by tripolyphosphate (TPP) have been studied. Electrokinetic properties and colloidal stability were analyzed as a function of pH and ionic strength of the medium. Chitosan particles showed volume phase transitions (swelling/shrinking processes) when the physicochemical conditions of the medium were changed. Experimental data were mainly obtained by electrophoretic mobility measurements and by photon correlation spectroscopy and static light scattering techniques. Chitosan chains possess glucosamine groups that can be deprotonated if the pH increases. Therefore, modification of pH from acid to basic values caused a deswelling process based on a reduction of the intramolecular electric repulsions inside the particle mesh. Electrophoretic mobility data helped to corroborate the above electrical mechanism as responsible for the size changes. Additionally, at those pH values around the isoelectric point of the chitosan-TPP particles, the system became colloidally unstable. Ionic strength variations also induced important structural changes. In this case, the presence of KCl at low and moderate concentrations provoked swelling, which rapidly turned on particle disintegration due to the weakness of chitosan-TPP ionic interactions. These last results were in good agreement with the predictions of gel swelling theory by salt in partially ionized networks. 相似文献
11.
The hydrophobic surface modification of chitosan gels was carried out using the amidating reaction of amido groups on a gel surface with stearic acid activated by 1-ethyl-3-(3-dimethylaminopropyl)-carbodiimide hydrochloride(EDC) and N-hydroxysuccinimide (NHS).Lipases from Candida rugosa were adsorbed on the nascent chitosan gels(CS) and stearyl-modified gels(SCS) with different degrees of amidation.The increased surface hydrophobicity of chitosan gels improved the adsorption capacity and activity of the ... 相似文献
12.
《Arabian Journal of Chemistry》2022,15(5):103743
During COVID-19 crisis, water pollution caused by pharmaceutical residuals have enormously aggravated since millions of patients worldwide are consuming tons of drugs daily. Antibiotics are the preponderance pharmaceutical pollutants in water bodies that surely cause a real threat to human life and ecosystems. The excellent characteristics of chitosan such as nontoxicity, easy functionality, biodegradability, availability in nature and the abundant hydroxyl and amine groups onto its backbone make it a promising adsorbent. Herein, we aimed to provide a comprehensive overview of recent published research papers regarding the removal of antibiotics by chitosan composite-based adsorbents. The structure, ionic form, optimum removal pH and λmax of the most common antibiotics including Tetracycline, Ciprofloxacin, Amoxicillin, Levofloxacin, Ceftriaxone, Erythromycin, Norfloxacin, Ofloxacin, Doxycycline, Cefotaxime and Sulfamethoxazole were summarized. The development of chitosan composite-based adsorbents in order to enhance their adsorption capacity, reusability and validity were presented. Moreover, the adsorption mechanisms of these antibiotics were explored to provide more information about adsorbate-adsorbent interactions. Besides the dominant factors on the adsorption process including pH, dosage, coexisting ions, etc. were discussed. Moreover, conclusions and future recommendations are provided to inspire for further researches. 相似文献
13.
Hsu SH Chang YB Tsai CL Fu KY Wang SH Tseng HJ 《Colloids and surfaces. B, Biointerfaces》2011,85(2):1551-206
Chitosan nanocomposites were prepared from chitosan and gold nanoparticles (AuNPs) or silver nanoparticles (AgNPs) of ~5 nm size. Transmission electron microscopy (TEM) showed the NPs in chitosan did not aggregate until higher concentrations (120-240 ppm). Atomic force microscopy (AFM) demonstrated that the nanocrystalline domains on chitosan surface were more evident upon addition of AuNPs (60 ppm) or AgNPs (120 ppm). Both nanocomposites showed greater elastic modulus, higher glass transition temperature (T(g)) and better cell proliferation than the pristine chitosan. Additionally, chitosan-Ag nanocomposites had antibacterial ability against Staphylococcus aureus. The potential of chitosan-Au nanocomposites as hemostatic wound dressings was evaluated in animal (rat) studies. Chitosan-Au was found to promote the repair of skin wound and hemostasis of severed hepatic portal vein. This study indicated that a small amount of NPs could induce significant changes in the physicochemical properties of chitosan, which may increase its biocompatibility and potential in wound management. 相似文献
14.
Cestari AR Vieira EF Dos Santos AG Mota JA de Almeida VP 《Journal of colloid and interface science》2004,280(2):380-386
In this work, chitosan beads were synthesized in acidic medium and cross-linked in 1% glutaraldehyde solution. The characterization of the materials using TG/DTG, XRD, and BET surface areas showed that the beads did not modify their characteristics after the cross-linking reaction. The cross-linked beads were utilized as adsorbents for the removal of the yellow-, blue-, and red-anionic reactive dyes from aqueous solutions at pH 2.0. Adsorption of the yellow-dye increased from 25 to 50 degrees C. However, adsorption of the blue-dye decreased from 25 to 50 degrees C. Interestingly, the adsorption of the red-dye decreased from 25 to 35 degrees C and increased from 45 to 50 degrees C. The kinetic data were evaluated using an Avrami kinetic model, where the parameter n was related to the determination of changes in the adsorption mechanisms. Adsorption data of the dyes in relation to the contact time, the chemical structures of the dyes, and temperature were presented and were discussed. 相似文献
15.
The kinetics of the adsorption at the air-water interface and the processes of the structure formation inside the adsorption layers of hydrophobically modified systems [alkylated chitosans and sodium dodecyl sulfate (SDS)–chitosan (Ch) complexes] have been studied by the tensiometric method based on the axisymmetric rising-bubble-shape analysis as a function of the bulk concentration of polymers and the ageing time of their adsorption layers. The kinetics of the adsorption of chitosan, alkylated chitosans (ChC3, ChC8, and ChC12), and surfactant–polyelectrolyte (PE) complexes formed by the chitosan and the polysoaps with oppositely charged anionic surfactant SDS is characterized by an induction time (the so-called lag time), τlag, corresponding to the diffusion stage of the formation of adsorption layers. During this time, the decrease in the surface tension (or the increase in the surface pressure π) does not exceed several millinewtons per meter that corresponds to the “gaseous” state of adsorption layers. The postlag stage of the formation of the adsorption layer is characterized by the remarkable rate of increase in the surface pressure π that corresponds to the conformational rearrangement of PEs inside the adsorption layer by increasing the number of hydrophobic groups (adsorbing centres) in contact with the non-polar phase at the interface. It has been found that during the lag time, the adsorption of alkylated chitosans (cationic polysoaps) increases with increasing alkyl chain length, whereas during the postlag time, the adsorption of the ChC3 is maximal with regard to other polysoaps. It has been confirmed that at equal content of alkyl groups in the system, the surface activity of the SDS–Ch complexes is much higher with regard to that of the polysoaps. The viscoelasticity of adsorption layers of individual PEs and their complexes continuously increases with the ageing time, giving evidence for the interaction between the polymers inside the adsorption layers. It has been found that the rate of increase in the dilational storage module E′ of the adsorption layers of SDS–Ch complexes is much higher than for the polysoaps that correlates with the higher surface activity of the former with regard to the latter. For the mentioned systems, the module E′ is much higher than the loss module E″ that confirms the solid-like properties of their adsorption layers. On the other hand, the adsorption layers of the chitosan are liquid-like, while E′<<E′′. 相似文献
16.
《Journal of Coordination Chemistry》2012,65(8):1333-1343
Chitosan derivatives, such as chitosan alpha-ketoglutaric acid (KCTS) and hydroxamated chitosan alpha-ketoglutaric acid (HKCTS), are prepared and their coordination behavior toward Ca(II) was studied. The adsorption isotherms were correlated by dc/dt?=??kcn at 20°C, 30°C, 40°C, 50°C, and 60°C. By linear correlation, the shapes of the isotherm curves were similar to the kinetic function of 1/c?=?kt and the rate equation was dc/dt?=??kc 2; the activation energies were 13.31 and 14.76?kJ?mol?1 for KCTS and HKCTS, respectively. The overall rate of Ca(II) adsorption is likely to be controlled by the chemical process. The coordination mechanism of chitosan derivatives with Ca(II) was studied by infrared and X-ray photoelectron spectroscopy. The results indicated that –NH– of KCTS was coordinated. Nitrogen of amino, oxygens of hydroxamic acid, and carbonyl in HKCTS coordinated with Ca(II). 相似文献
17.
Sabarudin A Oshima M Takayanagi T Hakim L Oshita K Gao YH Motomizu S 《Analytica chimica acta》2007,581(2):214-220
A chitosan resin derivatized with 3,4-dihydroxybenzoic acid moiety (CCTS-DHBA resin) was newly synthesized for the collection/concentration of trace uranium by using cross-linked chitosan (CCTS) as base material, and the adsorption behavior of uranium as well as 60 elements on the resin was examined by passing the sample solutions through a mini-column packed with the resin. After the elution of the collected elements on the resin with 1 M HNO3, the eluates were measured by inductively coupled plasma-mass spectrometry (ICP-MS).The CCTS-DHBA resin can adsorb several metal cations and several oxoanionic elements at appropriate pH. Among these metal ions, uranium shows an excellent adsorption behavior on this resin. Uranium as UO22+ species can be adsorbed on the resin by chelating mechanism with adsorption capacity of 330 mg g−1 resin. Through the column treatment, the complete removal of large amounts of alkali and alkaline earth matrices without any loss of adsorption efficiency over prolonged usage were achieved with this resin.The CCTS-DHBA resin was applied to the adsorption/collection of uranium in tap water, river water and seawater samples with satisfactory results. The validation of the proposed method was carried out by analyzing uranium in the standard reference materials of SLRS-4, CASS-4, and NASS-5 after passing through the CCTS-DHBA resin, and the results showed good agreement with the certified values. 相似文献
18.
Influences of colloidal stability and electrokinetic property on electrodialysis performance in the presence of silica sol 总被引:1,自引:0,他引:1
Negatively charged silica sol is known to lead to fouling of anion exchange membranes during electrodialysis (ED) as a result of its deposition on the membrane surface. It is known that the fouling potential is related to the physical and electrochemical properties of the silica particles as well as those of the anion exchange membranes. In this study, the properties of the silica sol were characterized in terms of its particle size, turbidity, and zeta potential in order to predict their effects on the electrodialysis performance. In the stability of colloidal particles, the critical coagulation concentrations of silica sol were determined as functions of ionic strength, cation species, and solution pH. In the electrodialysis of NaCl solution containing silica sol with various concentrations of CaCl(2), the colloidal behavior related to deposition and transport was examined during and after electrodialysis. The electrodialysis experiments clearly showed that the deposition and transport of silica sol during electrodialysis were related to the colloidal stability of dispersion. 相似文献
19.
壳聚糖对Cd2+的吸附性能 总被引:4,自引:0,他引:4
壳聚糖(chitosan,简称CTS)是由虾、蟹壳脱钙、蛋白质和脂肪后、经化学改性得到的天然高分子聚合物,分子中存在能与金属离子配位的羟基或氨基,其配合物可作为絮凝剂和螯合吸附剂用于水处理[1 3]及湿法冶金[4]等。本文考察了壳聚糖对Cd2+的静态吸附性能。1 实验部分1.1 试剂与仪器壳聚糖(浙江玉环县化工厂);硫酸镉、硝酸镉(分析纯,广州化学试剂厂);碳酸镉(化学纯,上海试剂二厂),其余试剂均为分析纯。78 1型磁力加热搅拌器(江苏金坛市恒丰仪器厂),501型超级恒温器(上海实验仪器厂),pHS 3型酸度计(上海第二分析仪器厂)。1… 相似文献
20.
The effects of concentration of NaCl and pH values on the adsorption isotherms of poly(diallyldimethylammonium chloride)( PDADMAC)on SiO2 microspheres and Zeta-potential of adsorbed-silica in different pH buffer have been investigated. The results show that the adsorption of the polyelectrolyte increases with increasing salt concentration and pH values,respectively. It follows the Langmiur isotherm. The isoelectric point of SiO2 microspheres gradually migrates toward the high pH values with increasing the adsorption of PDADMAC. Under alkaline conditions the PDADMAC adsorption on SiO2 microspheres shows good stability of disperse. The X-ray photoelectron spectroscopy(XPS)analysis of the PDADMAC adsorpted SiO2 microspheres sample exhibits the presence of nitrogen-containing intermediates with N1s XPS peaks at the binding energy of 401.7 eV. The O1s spectra show two distinct peaks which are oxygen-containing silica corresponding lower binding energy and adsorping oxygen corresponding higher binding energy,respectively. With the PDADMAC adsorption on SiO2 microspheres the peak of O1s contributed from the part of adsorping oxygen increases. 相似文献