Charged silsesquioxane used as a vehicle for gold nanoparticles to perform the synthesis of catalyst xerogels

The water soluble charged silsesquioxane that contains the bridged 1,4-diazoniabicyclo[2.2.2]octane chloride group, was used as stabilizing agent and size controller in the synthesis of gold nanoparticles smaller than 15?nm in aqueous medium. The gold nanoparticle dispersion was converted in solid powder form by evaporation. This powder presented organized structure imposed by the presence of charged organic group, similar to organized structure already observed for pure silsesquioxane. The gold nanoparticles in solid powder form presented high storage stability for several months, at ambient conditions, and can be completely redispersed in water again. After redispersion, the optical properties of gold nanoparticles, observed by ultra-violet and visible spectroscopy, and their morphological characteristics, investigated by transmission electron microscopy, are preserved. The gold nanoparticle aqueous dispersion was used as a vehicle of nanoparticles in the synthesis of sol?Cgel silica based hybrid material. This xerogel was characterized by N₂ adsorption?Cdesorption isotherms, showing 260?m²g^?1, and it was applied in a satisfactory way as catalyst for p-nitrophenol reduction to p-aminephenol.     

The green synthesis of fine particles of gold using an aqueous extract of <Emphasis Type="Italic">Monotheca buxifolia</Emphasis> (Flac.)

This study deals with the synthesis and physicochemical investigation of gold nanoparticles using an aqueous extract of Monotheca buxifolia (Flac.). On the treatment of aqueous solution of tetrachloroauric acid with the plant extract, gold nanoparticles were rapidly fabricated. The synthesized particles were characterized by UV–Vis spectrophotometry (UV), Fourier transform infrared spectroscopy (FTIR), energy dispersive X-ray (EDX) and Scanning electron microscopy (SEM). The formation of AuNPs was confirmed by noting the change in color through visual observations as well as via UV–Vis spectroscopy. UV?Vis spectrum of the aqueous medium containing gold nanoparticles showed an absorption peak at around 540 nm. FTIR was used to identify the chemical composition of gold nanoparticles and Au-capped plant extract. The presence of elemental gold was also confirmed through EDX analysis. SEM analysis of the gold nanoparticles showed that they have a uniform spherical shape with an average size in the range of 70–78 nm. This green system showed to be better capping and stabilizing agent for the fine particles. Further, the antioxidant activity of Monotheca buxifolia (Flac.) extract and Au-capped with the plant extract was also evaluated using FeCl₃/K₃[Fe(CN)]₆ in vitro assay.     

Synergetic effect in PdAu/CeO<Subscript>2</Subscript> catalysts for the low-temperature oxidation of CO

Gold-palladium catalysts supported on cerium oxide were synthesized with the double complex salts. X-ray photoelectron spectroscopy (XPS) and other physicochemical methods (TEM, TPR) were used to demonstrate that synthesis of highly active palladium catalysts requires the oxidative treatment stimulating the formation of a catalytically active surface solid solution Pd _x Ce_1?x O₂, which is responsible for the lowtemperature activity (LTA) in the reaction CO + O₂. In the case of gold catalysts, active sites for the lowtemperature oxidation of CO are represented by gold nanoparticles and its cationic interface species. Simultaneous deposition of two metals increases the catalyst LTA due to interaction of both gold and palladium with the support surface to form a Pd_1?x CexO₂ solid solution and cationic interface species of palladium and gold on the boundary of Pd-Au alloy particles anchored on the solid solution surface.     

Absorption,fluorescence and resonance Rayleigh scattering spectral characteristics of interaction of gold nanoparticle with safranine T

Gold nanoparticle is an important nanomaterial and has been investigated widely owing to its special physical and chemical property[1―5]. In recent years it has been found that the multiple-component nano- structure assembly containing metal, semiconduct…     

An XPS and STM study of the size effect in NO adsorption on gold nanoparticles

The effect of the gold particle size, temperature of the model gold catalyst, and NO pressure on the composition of the adsorption layer was studied by in situ XPS and STM methods. Adsorption of nitric oxide was carried out on gold nanoparticles with a mean size of 2?C7 nm prepared on the thin film surface of alumina. In high-vacuum conditions (P _NO ?? 10^?5 Pa), only atomically adsorbed nitrogen is formed on the surface of gold nanoparticles. At about 1 Pa pressure of NO and in the temperature range from 325 to 475 K, atomically adsorbed nitrogen coexists with the N₂O adsorption complex. The surface concentration of the adsorbed species changes with a change in both the mean gold particle size and adsorption temperature. The saturation coverage of the surface with the nitrogen-containing complexes is observed for the sample with a mean size of gold particles of 4 nm. The surface of these samples is mainly covered with atomically adsorbed nitrogen, the saturation coverage of adsorbed nitrogen of about ??0.6 monolayer is attained at T = 473 K. The change in the composition of the adsorption layer with temperature of the catalysts agrees with the literature data on the corresponding temperature dependence of the selectivity of N₂ formation observed in the catalytic reduction of NO with carbon monoxide on the Au/Al₂O₃ catalyst. The dependences of the composition of the adsorption layer on the mean size of Au nanoparticles (size effect) and temperature of the catalyst are explained by the sensitivity of NO adsorption to specific features of the gold surface.     

Gold nanoparticles fabricated by pulsed laser ablation in supercritical CO2

Nanosecond pulsed laser ablation (PLA) of gold plate with an excitation wavelength of 532?nm was carried out in supercritical CO₂ (scCO₂) to fabricate gold nanoparticles. Surface morphology of the gold plate after irradiation and the crater depth after PLA were observed by scanning electron microscopy and laser scanning microscopy, while extinction spectra of gold nanoparticles collected in the glass slide was measured by UV?CVis spectrophotometer. The gold plate was ablated at various scCO₂ densities and irradiation times at constant temperature of 40??C. The ablation was also conducted at atmospheric condition with air to evaluate the environmental dependence of ablation. Both surface morphology of the irradiated gold plate and crater depth formation were significantly affected by the changes in scCO₂ density, the surrounding environment, and irradiation time. As expected, the increasing scCO₂ density resulted in a deeper ablation crater, however, the deepest crater was obtained at a density of 0.63?g/cm³ or pressure of 10?MPa. Gold nanoparticles generated by PLA in scCO₂ have been confirmed at the spectra band near 530?nm.     

Photochemical synthesis of gold nanoparticles in N,N′-dimethylformamide via thiourea-derivatized polyoxometalate

In the present work, we report the photochemical synthesis of gold nanoparticles in N,N′-dimethylformamide by addition of a photocatalyst like thiourea-modified polyoxometalate (γ-SiW₁₂O₄₀). The polyoxometalate behaves as an electron relay. Reduction of the polyoxometalate takes place under UV irradiation followed by a transfer of electrons to the gold ions, leading to the formation of gold nanoparticles. The formation of the gold particles was monitored with time by UV–Vis spectrophotometry. The polyoxometalate also acts as a stabilizing agent and helps in controlling the size of the nanoparticles. The shape and size distribution was obtained from transmission electron microscopy studies. Spherical and monodisperse gold nanoparticles of ~10 nm size were obtained.     

Lateral flow immunodipstick for visual detection of aflatoxin B1 in food using immuno-nanoparticles composed of a silver core and a gold shell

An immunodipstick assay with a lateral flow strip was developed for fast screening of food for aflatoxin B₁ (AFB₁) using the respective monoclonal antibody immobilized on nanoparticles with a silver core and a gold shell (AgAu) as detection reagent. The membrane-based immunodipstick consisted of a test line containing AFB₁ conjugated to bovine serum albumin, and a control line with goat anti-mouse IgG. One to two colored lines are formed on the membrane by using the red AgAu nanoparticles coated with anti-AFB₁ as signaling reagents. Under optimal conditions, the dipstick exhibits a lower visual detection limit of 0.1 ng?mL^?1 of AFB₁. Compared to the use of pure gold nanoparticles, the AgAu nanoparticles strongly enhance the sensitivity of the assay, and the reproducibility and stability are comparable. The assay was evaluated with naturally contaminated samples including rice, wheat, sunflower, cotton, chillies, and almonds, and a good correlation was found with data obtained with a commercially available enzyme-linked immunosorbent assay. The simple and non-instrumental dipstick method may further be extended to the screening of other mycotoxins in food.     

An approach for the surface functionalized gold nanoparticles with pH-responsive polymer by combination of RAFT and click chemistry

In this report, we demonstrated a novel efficient post-modification route for preparation of smart hybrid gold nanoparticles with poly(4-vinylpyridine) (P4VP) based on RAFT and click chemistry. A new azide terminated ligand was first synthesized to modify gold nanoparticles by ligand exchange reaction, and then click reaction was used to graft alkyne terminated P4VP which was prepared by RAFT onto the surface of gold nanoparticles. The functionalized hybrid gold nanoparticles were characterized by TEM, FTIR, and XPS etc. The results indicated that the P4VP was successfully grafted onto the surface of gold nanoparticles by click reaction. The surface grafting density was calculated to be about 6 chains/nm²_. In addition, the hybrid gold nanoparticles showed a pH responsive phenomenon as the pH value changed around 5.     

Simultaneous quantification of catecholamines in rat brain by high‐performance liquid chromatography with on‐line gold nanoparticle‐catalyzed luminol chemiluminescence detection

A new method based on high‐performance liquid chromatography (HPLC) coupled with on‐line gold nanoparticle‐catalyzed luminol chemiluminescence (CL) detection was developed for the simultaneous quantitation of catecholamines in rat brain. In the present CL system, gold nanoparticles were produced by the on‐line reaction of H₂O₂, NaHCO₃?Na₂CO₃ (buffer solution of luminol) and HAuCl_4. Norepinephrine (NE), epinephrine (EP) and dopamine (DA) could strongly enhance the CL signal of the on‐line gold nanoparticle‐catalyzed luminol system. The UV?visible absorption spectra and transmission electron microscopy studies were carried out, and the CL enhancement mechanism was proposed. Catecholamines promoted the on‐line formation of more gold nanoparticles, which better catalyzed the luminol–H₂O₂ CL reaction. The good separation of NE, EP and DA was achieved with isocratic elution using a mixture of methanol and 0.2% aqueous phosphoric acid (5:95, v/v) within 8.5 min. Under the optimized conditions, the detection limits, defined as a signal‐to‐noise ratio of 3, were in the range of 1.32–1.90 ng/mL, corresponding to 26.4?38.0 pg for 20 μL sample injection. The recoveries of catecholamines added to rat brain sample were >94.6%, with the precisions <5.5%. The validated HPLC?CL method was successfully applied to determine NE and DA in rat brain without prior sample purification. Copyright © 2014 John Wiley & Sons, Ltd.     

A new and selective and sensitive nanogold-labeled immunoresoance scattering spectral assay for trace prealbumin

A gold-labeled immunoresonance scattering spectral probe for trace prealbumin (PA) was prepared by using gold nanoparticles in size of 9.0 nm to label goat anti-human prealbumin polyclonal antibody. The immune reaction between the gold-labeled antibody and prealbumin took place in pH 7.6 Na₂HPO₄-NaH₂PO₄ buffer solution. In the presence of polyethylene glycol PEG-10000, the labeled gold nanoparticles were released and aggregated which brought the resonance scattering intensity (I_RS) at 580 nm to enhance greatly. The ΔI_RS is proportional to the prealbumin concentration in the range from 16.67 to 666.67 ng/mL, with a detection limit of 4.1 ng/mL. This simple, sensitive and selective assay was applied to determination of prealbumin in human plasma, with satisfactory results.     

Colorimetric detection of cadmium in water using L-cysteine Functionalized gold–silver nanoparticles

Abstract

A new simple colorimetric assay was developed for the selective and sensitive detection of cadmium (II) in water samples using L-cysteine functionalized gold–silver nanoparticles. The gold–silver nanoparticles were synthesized by reducing HAuCl₄ and AgNO₃ in aqueous medium and were further functionalized with L-cysteine. The formation of homogeneous gold–silver nanoparticles was characterized by transmission electron microscopy, energy-dispersive X-ray spectroscopy, particle size distribution, and ultraviolet–visible absorption methods. In the presence of cadmium (II), the aggregation of functionalized gold–silver nanoparticles caused by the interaction between cadmium (II) and L-cysteine resulted in a naked-eye visible color change of L-cysteine functionalized gold–silver nanoparticles from orange–yellow to green, which can be monitored by a simple ultraviolet–visible spectrophotometer. Under the optimal conditions, the absorbance ratio at 600–435?nm (A₆₀₀/A₄₃₅) was linear to the concentration of cadmium (II) from 0.4 to 38.6?μM, and the limit of detection of cadmium (II) was 44?nM. Interference measurements showed that the method exhibited good selectivity. The proposed method was successfully applied to the determination of cadmium (II) in environmental water samples. The results indicated that this simple, selective, and sensitive sensing system has good potential for practical applications.     

New Supramolecular Drug Carriers: The Study of Organogel Conjugated Gold Nanoparticles

An aqueous solution of sodium citrate stabilized gold nanoparticles (AuNP) in the presence of N-lauroyl-L-alanine (C₁₂ALA) forms a stable gel. The structure of the gel and the distribution profile of AuNP in it were analyzed. Will nanoparticles separated from each other with sodium citrate behave in the same way in solution and trapped in the gel matrix? Will the spatial limitation of solvent molecules aggregate nanoparticles and destroy their homogeneity? These questions are very important from the point of view of the use of gold nanoparticles, trapped in the gel structure as carriers of drugs in the slow-release process. The lack of homogeneity of this distribution will have a major impact on the rate of release of the appropriate amount of therapeutic drug from the matrix. In this work, we attempt to answer these questions. The performed biological assays revealed that both C₁₂ALA and C₁₂ALA-AuNP show an excellent level of biological neutrality. They might be used as a transporting medium for a drug delivery without affecting the drug’s activity.     

Gold-catalyzed aerobic oxidation of dibenzylamine: Homogeneous or heterogeneous catalysis?

Au(OAc)₃ is applied as an effective catalyst of the selective oxidation of dibenzylamine to dibenzylimine using molecular oxygen as the only oxidant. When Au(OAc)₃ was preadsorbed onto CeO₂, the supported catalyst was more active than any homogeneous or heterogeneous catalyst known for this reaction. Although, some fascinating color changes in the early stage of the reaction indicated the formation of an amine complex, conventional filtration experiments proved the heterogeneity of the system. The fate of the active gold component was studied by in situ X-ray absorption spectroscopy (XANES) using a specially designed cell. These investigations revealed that in the early stage of the reaction Au(OAc)₃ is dissolved and subsequently reduced by the amine and the in situ formed gold nanoparticles are the real active species of the reaction. Formation of gold nanoparticles during dibenzylamine oxidation was proved independently by transmission electron microscopy. Our findings lead to a simple synthetic procedure using a commercially available gold salt, which upon interaction with the amine forms highly active and selective gold nanoparticles.     

Electrochemical immuno-bioanalysis for carcinoma antigen 125 based on thionine and gold nanoparticles-modified carbon paste interface

A novel electrochemical immunosensor for the determination of carcinoma antigen 125 (CA125) was developed by means of immobilizing CA125 antibody (anti-CA125) on gold nanoparticles (Au) and thionine (Thi)-modified carbon paste interface. To avoid the leak of hydrophilic gold nanoparticles and thionine from carbon paste interface, the Au-Thi-modified carbon paste electrodes (CPEs) were first treated in the mixture solution containing 10% HNO₃ and 2.5% K₂Cr₂O₇ for 1.5 min at +1.5 V to make the carbon surface with -COOH groups, which can react with -NH₂ groups on the thionine molecule, in the meantime, gold nanoparticles were absorbed on the thionine surface. Subsequently, CA125 antibodies were assembled onto the surface of gold nanoparticles. The fabrication process of the immunosensor was characterized by fourier transform infrared spectroscopy (FTIR) and UV-vis absorption spectroscopy. The performance and factors influencing the performance of the immunosensor were studied in detail. A direct electrochemical immunoassay format was employed to detect CA125 antigen based on the current change before and after the antigen-antibody reaction. The current change was proportional to CA125 concentration ranging from 10 to 30 U/ml with a detection limit of 1.8 U/ml (at 3δ). The immunosensors were used to analyze CA125 in human serum specimens. Analytical results of clinical samples show that the developed immunoassay has a promising alternative approach for detecting CA125 in the clinical diagnosis.     

Synthesis of P(MBA-co-MAA) microsphere-grafted PAMAM dendrimers and their application as supporters for gold nanoparticles

Poly(N,N′-methylenebisacrylamide-co-acrylic acid) microsphere-supported polyamidoamine (PAMAM) dendrimers up to third generation (G) were grown onto the surface as well as the gel-layer of P(MBA-co-MAA) microspheres by a divergent method. The P(MBA-co-MAA) supported PAMAM dendrimers were used as heterogeneous stabilizers for the gold nanoparticles by an in situ reduction of HAuCl₄ via the efficient coordination interaction between the amino groups of the supported PAMAM dendrimers and the gold atoms. The effects of the generations of the P(MBA-co-MAA) supported PAMAM dendrimer on the loadings and the catalytic activity of the heterogeneous Au nanoparticles were systematically investigated with the reduction of 4-nitrophenol to 4-aminophenol as a model reaction.     

Facile one-pot preparation of gold nanoparticles in the presence of fluoroalkyl end-capped oligomers,fluoroalkyl end-capped oligomers/silica nanocomposites,and fluoroalkyl end-capped oligomers/polyaniline nanocomposites

A variety of fluoroalkyl end-capped oligomers, such as fluoroalkyl end-capped acrylic acid oligomer [R_F-(ACA) _n -R_F], acryloylmorpholine oligomer [R_F-(ACMO) _n -R_F], 2-acrylamido-2-methylpropanesulfonic acid oligomer [R_F-(AMPS) _n -R_F], 2-(methacryloyloxy)ethanesulfonic acid oligomer [R_F-(MES) _n -R_F], and N,N-dimethylacrylamide oligomer [R_F-(DMAA) _n -R_F], were applied to the autoreduction of gold ions to give the corresponding oligomers/gold nanocomposites, of whose sharp plasmon absorption bands are observed around 535 nm. In these fluorinated oligomers, R_F-(ACA) _n -R_F oligomer and R_F-(ACMO) _n -R_F were effective for the one-pot preparation of the gold nanoparticles under very mild conditions; although the other fluorinated oligomers and the corresponding non-fluorinated–(ACMO) _n -oligomer were unable to afford the gold nanoparticles. R_F-(ACA) _n -R_F/SiO₂ nanocomposites and R_F-(ACMO) _n -R_F/SiO₂ nanocomposites, which were prepared by the sol–gel reactions of tetraethoxysilane in the presence of silica nanoparticles and the corresponding oligomers under alkaline conditions, were also applied to the encapsulation of gold nanoparticles into these fluorinated nanocomposite cores through the autoreduction of gold ions at room temperature. Interestingly, these fluorinated oligomers/silica nanocomposite-encapsulated gold nanocomposites before and after calcination at 800 °C were found to exhibit the same plasmon absorption band around 525 nm. R_F-(MES) _n -R_F oligomer and R_F-(AMPS) _n -R_F oligomer are not suitable for the autoreduction of gold ions; however, R_F-(MES)_n-R_F[or R_F-(AMPS) _n -R_F]/polyaniline [PAn] nanocomposites, which were prepared by the polymerization of aniline initiated by ammonium persulfate in the presence of the corresponding oligomer, enabled the formation of gold nanoparticles through the oxidation of PAn in the composites at room temperature. The reversible conformational change of PAn in the nanocomposites from the polyemeraldine salt to the oxidized pernigraniline base was observed during such oxidation process. Graphical abstract

?     

Synthesis and optical properties of quasi-2D CdS x Se1 − x nanoparticles

Colloidal 2D CdS _x Se_{1 ? x} nanoparticles have been synthesized by a solution method in octadecene using oleic acid as a stabilizer. Growth of quasi-2D nanoparticles has been promoted by the presence of cadmium acetate in the reaction mixture. The resulting nanoparticles are platelets with lateral sizes 20–30 nm. The absorption and luminescence spectra of these nanoparticles show narrow bands of lh-e and hh-e exciton transitions corresponding to 2D systems. The spectral position of the lowest energy hh-e transition monotonically changes within 382–461 nm with a change in the composition of nanoparticles. The observed absorption bands are broader than those for the individual CdSe and CdS nanoparticles. The suggested method makes it possible to vary the exciton band position for quasi-2D nanoparticles by changing their composition.     

Effect of size and shape controlled biogenic synthesis of gold nanoparticles and their mode of interactions against food borne bacterial pathogens

In this study, size and shape controlled biogenic synthesis of gold nanoparticles and their antibacterial activity against food borne bacterial pathogens were investigated. Synthesis of gold nanoparticles was carried out using two medicinally important plants Cucurbita pepo and Malva crispa and the size and shape of the nanoparticles were controlled by altering various parameters in the reaction medium. Results obtained from UV–Vis, FE-SEM, EDS and HR-TEM analyses supported the nanoparticles formation. FT-IR analysis confirmed the presence of biomolecules in the plant leaves extracts responsible for reducing and capping agents. Interestingly, the plant extract synthesized gold nanoparticles showed effective inhibition zone against Gram-positive and Gram-negative pathogens. The minimum inhibitory concentration (MIC) of synthesized gold nanoparticles at 400 μg/ml concentration showed effective inhibitory activity against Escherichia coli and Listeria monocytogenes. Conductivity of the medium continuously increased during the nanoparticles treatment with food borne bacterial pathogens resulting in indirect indication of the disruption of bacterial cell membranes. In addition, mode of interactions of gold nanoparticles against food borne bacterial pathogens was demonstrated using Bio-TEM analysis which is clear evident for the disruption of bacterial cell membranes.     

An electrochemical biosensor for α-fetoprotein based on carbon paste electrode constructed of room temperature ionic liquid and gold nanoparticles

A novel and effective electrochemical immunosensor for the rapid determination of α-fetoprotein (AFP) based on carbon paste electrode (CPE) consisting of room temperature ionic liquid (RTIL) N-butylpyridinium hexafluorophosphate (BPPF₆) and graphite. The surface of the CPE was modified with gold nanoparticles for the immobilization of the α-fetoprotein antibody (anti-AFP). By sandwiching the antigen between anti-AFP on the CPE modified with gold nanoparticles and the secondary antibody, polyclonal anti-human-AFP labeled with horseradish peroxidase (HRP-labeled anti-AFP), the immunoassay was established. The concentration of AFP was determined based on differential pulse voltammetry (DPV) signal, which was generated in the reaction between O-aminophenol (OAP) and H₂O₂ catalyzed by HRP labeled on the sandwich immunosensor. AFP concentration could be measured in a linear range of 0.50-80.00 ng mL⁻¹ with a detection limit of 0.25 ng mL⁻¹. The immunosensor exhibited high sensitivity and good stability, and would be valuable for clinical assay of AFP.