Aryldiazonium Salts as Nitrogen‐Based Lewis Acids: Facile Synthesis of Tuneable Azophosphonium Salts

Inspired by the commercially available azoimidazolium dyes (e.g., Basic Red 51) that can be obtained from aryldiazonium salts and N‐heterocyclic carbenes, we developed the synthesis of a unique set of arylazophosphonium salts. A range of colours were obtained by applying readily tuneable phosphine donor ligands and para‐substituted aryldiazonium salts as nitrogen‐based Lewis acids. With cyclic voltammetry, a general procedure was designed to establish whether the reaction between a Lewis acid and a Lewis base occurs by single‐electron transfer or electron‐pair transfer.     

Isotopic splitting patterns in the 13C NMR spectra of some partially deuterated 1‐aryl‐2‐(phenyldiazenyl)butane‐1,3‐dione and 4‐hydroxy‐3‐(phenyldiazenyl)‐2H‐chromen‐2‐one: evidence for elucidation of tautomeric forms

Nuclear magnetic resonance spectra of synthesized azo dyes derived from aniline derivatives in reaction with benzoylacetone and 4‐hydroxycoumarin were studied in both CDCl₃ and (CD₃)₂SO (two drops of D₂O were added into solutions of dyes). All dyes showed intramolecular hydrogen bonding. Dyes derived from o‐nitro aniline in the reaction with benzoylacetone, and 4‐hydroxycoumarin showed bifurcated intramolecular hydrogen bonds. The solvent‐substrate proton exchange of dyes derived from benzoylacetone and 4‐hydroxycoumarin was examined in the presence of two drops of D₂O. Among ten dye samples, two dyes derived from benzoylacetone did not show deuteration, three dyes showed partial deuteration and five dyes showed full deuteration under similar conditions. For the partially deuterated dyes the β‐isotope effect in ¹³C splitting was investigated and was used for the determination of the predominant tautomeric form. Copyright © 2016 John Wiley & Sons, Ltd.     

Tautomeric behaviour and isotopic multiplets in the 13C NMR spectra of partially deuterated 5‐arylazo‐pyrimidine (1H,3H,5H)‐2,4,6‐triones and 5‐arylazo‐2‐thioxo‐pyrimidine (1H,3H,5H)‐4,6‐diones—evidence for elucidation of tautomeric forms

NMR spectra of the synthesized azo dyes, 5‐arylazo‐pyrimidine (1H,3H,5H)‐2,4,6‐triones (5a–g), 1,3‐dimethyl‐5‐arylazo‐pyrimidine (1H,3H,5H)‐2,4,6‐triones (6a–g), and 5‐arylazo‐2‐thioxo‐pyrimidine (1H,3H,5H)‐4,6‐diones (7a–g) were studied in (CD₃)₂SO (three drops of CD₃OD were added into solutions of the dyes in two different concentrations). All dyes showed intramolecular hydrogen bonding. Dyes 5a–7a showed bifurcated intramolecular hydrogen bonds. Tautomeric behaviours of some of N‐methylated azo dyes (6a‐g) were studied in two different concentrations. The solvent–substrate proton exchange of dyes 5a–d, 6a and 7a–e was examined in presence of three drops of CD₃OD. The dyes which were soluble in (CD₃)₂SO containing CD₃OD showed isotopic splitting (β‐isotope effect) in the ¹³C NMR spectra. Copyright © 2009 John Wiley & Sons, Ltd.     

A Microporous Anionic Metal–Organic Framework for Sensing Luminescence of Lanthanide(III) Ions and Selective Absorption of Dyes by Ionic Exchange

Herein, a novel anionic framework with primitive centered cubic (pcu) topology, [(CH₃)₂NH₂]₄[(Zn₄dttz₆)Zn₃]?15 DMF?4.5 H₂O, ( IFMC‐2 ; H₃dttz=4,5‐di(1H‐tetrazol‐5‐yl)‐2H‐1,2,3‐triazole) was solvothermally isolated. A new example of a tetranuclear zinc cluster {Zn₄dttz₆} served as a secondary building unit in IFMC‐2 . Furthermore, the metal cluster was connected by Zn^II ions to give rise to a 3D open microporous structure. The lanthanide(III)‐loaded metal–organic framework (MOF) materials Ln³⁺@IFMC‐2 , were successfully prepared by using ion‐exchange experiments owing to the anionic framework of IFMC‐2 . Moreover, the emission spectra of the as‐prepared Ln³⁺@IFMC‐2 were investigated, and the results suggested that IFMC‐2 could be utilized as a potential luminescent probe toward different Ln³⁺ ions. Additionally, the absorption ability of IFMC‐2 toward ionic dyes was also performed. Cationic dyes can be absorbed, but not neutral and anionic dyes, thus indicating that IFMC‐2 exhibits selective absorption toward cationic dyes. Furthermore, the cationic dyes can be gradually released in the presence of NaCl.     

Asymmetric Distyrylpyridinium Dyes as Red‐Emitting Fluorescent Probes for Quadruplex DNA

The interactions of three cationic distyryl dyes, namely 2,4‐bis(4‐dimethylaminostyryl)‐1‐methylpyridinium ( 1 a ), its derivative with a quaternary aminoalkyl chain ( 1 b ), and the symmetric 2,6‐bis(4‐dimethylaminostyryl)‐1‐methylpyridinium ( 2 a ), with several quadruplex and duplex nucleic acids were studied with the aim to establish the influence of the geometry of the dyes on their DNA‐binding and DNA‐probing properties. The results from spectrofluorimetric titrations and thermal denaturation experiments provide evidence that asymmetric (2,4‐disubstituted) dyes 1 a and 1 b bind to quadruplex DNA structures with a near‐micromolar affinity and a fair selectivity with respect to double‐stranded (ds) DNA [K_a(G4)/K_a(ds)=2.5–8.4]. At the same time, the fluorescence of both dyes is selectively increased in the presence of quadruplex DNAs (more than 80–100‐fold in the case of human telomeric quadruplex), even in the presence of an excess of competing double‐stranded DNA. This optical selectivity allows these dyes to be used as quadruplex‐DNA‐selective probes in solution and stains in polyacrylamide gels. In contrast, the symmetric analogue 2 a displays a strong binding preference for double‐stranded DNA [K_a(ds)/K_a(G4)=40–100), presumably due to binding in the minor groove. In addition, 2 a is not able to discriminate between quadruplex and duplex DNA, as its fluorescence is increased equally well (20–50‐fold) in the presence of both structures. This study emphasizes and rationalizes the strong impact of subtle structural variations on both DNA‐recognition properties and fluorimetric response of organic dyes.     

Bi‐anchoring Organic Dyes that Contain Benzimidazole Branches for Dye‐Sensitized Solar Cells: Effects of π Spacer and Peripheral Donor Groups

Benzimidazole‐branched bi‐anchoring organic dyes that contained triphenylamine/phenothiazine donors, 2‐cyanoacrylic acid acceptors, and various π linkers were synthesized and examined as sensitizers for dye‐sensitized solar cells. The structure–activity relationships in these dyes were systematically investigated by using absorption spectroscopy, cyclic voltammetry, and density functional theory calculations. The wavelength of the absorption peak was more‐heavily influenced by the nature of the π linker than by the nature of the donor. For a given donor, the absorption maximum (λ_max) was red‐shifted on changing the π linker from phenyl to 2,2′‐bithiophene, whilst the dyes that contained triphenylamine units displayed higher molar extinction coefficients (?) than their analogous phenothiazine‐based triphenylamine dyes, which led to good light‐harvesting properties in the triphenylamine‐based dyes. Electrochemical data for the dyes indicated that the triphenylamine‐based dyes possessed relatively low‐lying HOMOs, which could be beneficial for suppressing back electron transfer from the conduction band of TiO₂ to the oxidized dyes, owing to facile regeneration of the oxidized dye by the electrolyte. The best performance in the DSSCs was observed for a dye that possessed a triphenylamine donor and 2,2′‐bithiophene π linkers. Electron impedance spectroscopy (EIS) studies revealed that the use of triphenylamine as the donor and phenyl or 2,2′‐bithiophene as the π linkers was beneficial for disrupting the dark current and charge‐recombination kinetics, which led to a long electron lifetime of the injected electrons in the conduction band of TiO₂.     

New Dual Donor–Acceptor (2D‐π‐2A) Porphyrin Sensitizers for Stable and Cost‐Effective Dye‐Sensitized Solar Cells

A series of porphyrin sensitizers that featured two electron‐donating groups and dual anchoring groups that were connected through a porphine π‐bridging unit have been synthesized and successfully applied in dye‐sensitized solar cells (DSSCs). The presence of electron‐donating groups had a significant influence on their spectroscopic, electrochemical, and photovoltaic properties. Overall, the dual anchoring groups gave tunable electronic properties and stronger attachment to TiO₂. These new dyes were readily synthesized in a minimum number of steps in gram‐scale quantities. Optical and electrochemical data confirmed the advantages of these dyes for use as sensitizers in DSSCs. Porphyrins with electron‐donating amino moieties provided improved charge separation and better charge‐injection efficiencies for the studied dual‐push–pull dyes. Attenuated total reflectance–Fourier‐transform infrared (ATR‐FTIR) and X‐ray photoelectron spectroscopy of the porphyrin dyes on TiO₂ suggest that both p‐carboxyphenyl groups are attached onto TiO₂, thereby resulting in strong attachment. Among these dyes, cis-Zn2BC2A , with two electron‐donating 3,6‐ditertbutyl‐phenyl‐carbazole groups and dual‐anchoring p‐carboxyphenyl groups, showed the highest efficiency of 4.07 %, with J_SC=9.81 mA cm^?2, V_OC=0.63 V, and FF=66 %. Our results also indicated a better photostability of the studied dual‐anchored sensitizers compared to their mono‐anchored analogues under identical conditions. These results provide insight into the developments of a new generation of high‐efficiency and thermally stable porphyrin sensitizers.     

Design of BODIPY Dyes as Photosensitisers in Multicomponent Catalyst Systems for Light‐Driven Hydrogen Production

A study of visible‐light‐driven hydrogen production using a multicomponent system consisting of different boron dipyrromethene (BODIPY) dyes, triethylamine and [{Pd(PPh₃)Cl₂}₂] from THF/water mixtures is presented. A trio of meso‐mesityl BODIPY dyes display the best activities and long‐term stabilities of more than ten days with the 2,6‐diiodo derivative showing the best performance.     

Rapid Synthesis of D‐A′‐π‐A Dyes through a One‐Pot Three‐Component Suzuki–Miyaura Coupling and an Evaluation of their Photovoltaic Properties for Use in Dye‐Sensitized Solar Cells

Twenty‐four D‐A′–π‐A dyes were rapidly synthesized through a one‐pot three‐component Suzuki–Miyaura coupling reaction, which was assisted by microwave irradiation. We measured the absorption spectra, electrochemical properties, and solar‐cell performance of all the synthesized dyes. The D5 πA4 dye contained our originally designed rigid and nonplanar donor and exerted the highest efficiency at 5.4 %. The short‐circuit current (J_sc) was the most important parameter for the conversion efficiency (η) in the case of the organic D‐A′‐π‐A dyes. Optimal ranges for the D‐A′‐π‐A dyes were observed for high values of J_sc/λ_max at λ=560–620 nm, an optical‐absorption edge of λ=690–790 nm, and E_HOMO and E_LUMO values of <1.14 and ?0.56 to ?0.76 V, respectively.     

Dye‐Sensitized Solar Cells Based on a Donor–Acceptor System with a Pyridine Cation as an Electron‐Withdrawing Anchoring Group

New hemicyanine dyes ( CM101 , CM102 , CM103 , and CM104 ) in which tetrahydroquinoline derivatives are used as electron donors and N‐(carboxymethyl)‐pyridinium is used as an electron acceptor and anchoring group were designed and synthesized for dye‐sensitized solar cells (DSSCs). Compared with corresponding dyes that have cyanoacetic acid as the acceptor, N‐(carboxymethyl)‐pyridinium has a stronger electron‐withdrawing ability, which causes the absorption maximum of dyes to be redshifted. The photovoltaic performance of the DSSCs based on dyes CM101 – CM104 markedly depends on the molecular structures of the dyes in terms of the n‐hexyl chains and methoxyl. The device sensitized by dye CM104 achieved the best conversion efficiency of 7.0 % (J_sc=13.4 mA cm^?2, V_oc=704 mV, FF=74.8 %) under AM 1.5 irradiation (100 mW cm^?2). In contrast, the device sensitized by reference dye CMR104 with the same donor but the cyanoacetic acid as the acceptor gave an efficiency of 3.4 % (J_sc=6.2 mA cm^?2, V_oc=730 mV, FF=74.8 %). Under the same conditions, the cell fabricated with N719 sensitized porous TiO₂ exhibited an efficiency of 7.9 % (J_sc=15.4 mA cm^?2, V_oc=723 mV, FF=72.3 %). The dyes CM101 – CM104 show a broader spectral response compared with the reference dyes CMR101 – CMR104 and have high IPCE exceeding 90 % from 450 to 580 nm. Considering the reflection of sunlight, the photoelectric conversion efficiency could be almost 100 % during this region.     

Degradation of hazardous organic dyes with solar‐driven advanced oxidation process catalyzed by the mixed metal–organic frameworks

phosphonate‐based bimetallic metal‐ organic frameworks, namely STA‐12(M₁, M₂) (M₁, M₂ = Mn, Fe, Co), show photocatalytic activity for the degradation of Rhodamine B (RhB) and Methylene blue (MB) from aqueous solution under natural sunlight irradiation. The degradation of the dyes, appears to be faster with STA‐12(Fe, Mn) than other synthesized MOFs. Thus, photo‐Fenton oxidative discoloration of dyes has been studied by H₂O₂ catalyzed with the STA‐12(Fe, Mn). The process is first order with respect to dyes and the synergistic index in the STA‐12(Fe, Mn)/sunlight/H₂O₂system reached as high as 472%. Mineralization of dyes was discussed by spectroscopic and TOC measurement. Besides, the efficiency of STA‐12(Fe, Mn) used in photocatalytic process was attentively investigated through the characterization of reactive radicals, the stability and reusability of the photocatalyst, also the effect of operational parameters such as H₂O₂ dosage, solution pH and initial dye concentration. This work demonstrates the first example of facilitating photo‐Fenton‐like excitation of H₂O₂ via phosphonate based mixed metal organic frameworks as photocatalysts and explained a new opportunity for solar‐induced AOP environmental remediation and protection.     

A General Strategy for Development of Near‐Infrared Fluorescent Probes for Bioimaging

Near‐infrared (NIR) fluorescent dyes with favorable photophysical properties are highly useful for bioimaging, but such dyes are still rare. The development of a unique class of NIR dyes via modifying the rhodol scaffold with fused tetrahydroquinoxaline rings is described. These new dyes showed large Stokes shifts (>110 nm). Among them, WR3, WR4, WR5, and WR6 displayed high fluorescence quantum yields and excellent photostability in aqueous solutions. Moreover, their fluorescence properties were tunable by easy modifications on the phenolic hydroxy group. Based on WR6, two NIR fluorescent turn‐on probes, WSP‐NIR and SeSP‐NIR, were devised for the detection of H₂S. The probe SeSP‐NIR was applied in visualizing intracellular H₂S. These dyes are expected to be useful fluorophore scaffolds in the development of new NIR probes for bioimaging.     

Fullerene‐Catalyzed Reduction of Azo Derivatives in Water under UV Irradiation

Metal‐free fullerene (C₆₀) was found to be an effective catalyst for the reduction of azo groups in basic aqueous solution under UV irradiation in the presence of NaBH₄. Use of NaBH₄ by itself is not sufficient to reduce the azo dyes without the assistance of a metal catalyst such as Pd and Ag. Experimental and theoretical results suggest that C₆₀ catalyzes this reaction by using its vacant orbital to accept the electron in the bonding orbital of azo dyes, which leads to the activation of the N?N bond. UV irradiation increases the ability of C₆₀ to interact with electron‐donor moieties in azo dyes.     

Iodinated AlIII‐Based Phthalocyanines are Promising Sensitizers for Dye‐Sensitized Solar Cells; A Theoretical Comparison Between ZnII,MgII, and AlIII‐Based Phthalocyanine Sensitizers

To design efficient dyes for dye‐sensitized solar cells (DSSCs), using a Zn‐coordinated phthalocyanine (TT7) as the prototype, a series of phthalocyanine dyes (Pcs) with different metal ions and peripheral/axial groups have been investigated by means of density functional theory (DFT) and time‐dependent DFT (TDDFT) methods. Computational results show that the iodinated Al‐based dye with a peripheral amino group (Al‐I‐NH₂‐Pc) exhibits the largest redshift in the maximum absorbance (λ_max). In addition, Al‐based dyes have appropriate energy‐level arrangements of frontier orbitals to keep excellent balance between electron injection and regeneration of oxidized dyes. Further, it has been found that the intermolecular π‐staking interaction in Al‐I‐Pc molecules is weaker than the other metal‐based Pcs, which may effectively reduce dye aggregation on the semi‐conductor surface. All these results suggest iodinated Al‐based Pcs (Al‐I‐Pcs) to be potentially promising sensitizers in DSSCs.     

A New Mussel‐Inspired Polydopamine Sensitizer for Dye‐Sensitized Solar Cells: Controlled Synthesis and Charge Transfer

The efficient electron injection by direct dye‐to‐TiO₂ charge transfer and strong adhesion of mussel‐inspired synthetic polydopamine (PDA) dyes with TiO₂ electrode is demonstrated. Spontaneous self‐polymerization of dopamine using dip‐coating (DC) and cyclic voltammetry (CV) in basic buffer solution were applied to TiO₂ layers under a nitrogen atmosphere, which offers a facile and reliable synthetic pathway to make the PDA dyes, PDA‐DC and PDA‐CV, with conformal surface and perform an efficient dye‐to‐TiO₂ charge transfer. Both synthetic methods led to excellent photovoltaic results and the PDA‐DC dye exhibited larger current density and efficiency values than those in the PDA‐CV dye. Under simulated AM 1.5 G solar light (100 mW cm^?2), a PDA‐DC dye exhibited a short circuit current density of 5.50 mW cm^?2, corresponding to an overall power conversion efficiency of 1.2 %, which is almost 10 times that of the dopamine dye‐sensitized solar cell. The PDA dyes showed strong adhesion with the nanocrystalline TiO₂ electrodes and the interface engineering of a dye‐adsorbed TiO₂ surface through the control of the coating methods, reaction times and solution concentration maximized the overall conversion efficiency, resulting in a remarkably high efficiency.     

Dye‐Sensitized Solar Cells Based on (Donor‐π‐Acceptor)2 Dyes With Dithiafulvalene as the Donor

Dipolar metal‐free sensitizers (D‐π‐A; D=donor, π=conjugated bridge, A=acceptor) consisting of a dithiafulvalene (DTF) unit as the electron donor, a benzene, thiophene, or fluorene moiety as the conjugated spacer, and 2‐cyanoacrylic acid as the electron acceptor have been synthesized. Dimeric congeners of these dyes, (D‐π‐A)₂, were also synthesized through iodine‐induced dimerization of an appropriate DTF‐containing segment. Dye‐sensitized solar cells (DSSCs) with the new dyes as the sensitizers have cell efficiencies that range from 2.11 to 5.24 %. In addition to better light harvesting, more effective suppression of the dark current than the D‐π‐A dyes is possible with the (D‐π‐A)₂ dyes.     

Theoretical studies on triaryamine‐based p‐type D‐D‐π‐A sensitizer

Development of triaryamine‐based nonmetallic dye sensitizers is a hot topic in the solar cell research. A series of triaryamine‐based dyes WS1 – WS7 were designed with W1 as the prototype. Density functional theory (DFT) and time‐dependent‐DFT calculations were used to investigate the effects of the attached donor D on the absorption spectra and electronic properties of the dyes. The light‐harvesting efficiency (LHE), hole injection force (ΔG_inj), dye regeneration force (ΔG_reg), and charge recombination force (ΔG_CR) for all the dyes were predicted. The insertion of D not only results in a red shift in the absorption spectra for all dyes but also achieves a broader absorption for visible light. Compared with that of the prototype, the absorption peak of the dye WS7 has a red shift of 95 nm and an oscillator strength increase of 29%. The absorption peak of WS7 is wider and stronger, and the absorption range extends to 900 nm. The LHE and ΔG_reg values of WS7 are 0.991 and ?1.49 eV, respectively. On overall evaluation, WS7 is a promising candidate of a p‐type dye sensitizer with good light absorption and dye regeneration efficiency.     

Color Tuning of the Aggregation‐Induced Emission of Maleimide Dyes by Molecular Design and Morphology Control

Aggregation‐induced emission (AIE)‐active maleimide dyes, namely, 2‐p‐toluidino‐N‐p‐tolylmaleimide, 3‐phenyl‐2‐toluidino‐N‐p‐tolylmaleimide, 2‐p‐thiocresyl‐3‐p‐toluidino‐N‐p‐tolylmaleimide, and 2,3‐dithiocresyl‐N‐arylmaleimides, were synthesized by facile synthetic procedures. The dyes show intense emission in the solid state, and emission colors were controlled from green (λ_max=527 nm) to orange (λ_max=609 nm) by varying the substituents at the 2‐ and 3‐positions of the maleimide and the packing structures in the solid state. 2,3‐Disubstituted maleimide dyes effectively underwent redshifts of their emission wavelength. Furthermore, some of the dyes exhibited mechanochromism and polymorphism, and their emission properties were dramatically dependent on the morphology of the solid samples. The mechanisms of the emission behaviors were investigated by X‐ray diffraction. The substituent of the nitrogen atom of the maleimide ring affected the intermolecular interactions and short contacts, which were observed by single crystal X‐ray crystallography, to result in completely different emission properties.     

Selective Detection of p‐Phenylenediamine in Hair Dyes Based on a Special CE Mechanism Using MnO2 Nanowires

We report a novel approach for selective determination of p‐phenylenediamine in hair dyes using β‐MnO₂ nanowires modified glassy carbon (GC) electrodes through an electrochemical co‐deposition process with chitosan hydrogel. A special CE (chemical reaction and electron transfer) process on the surface of β‐MnO₂ nanowires modified GC electrode is proposed and proved by cyclic voltammetry and UV‐Vis spectroscopy in the presence of p‐phenylenediamine. p‐Phenylenediamine can react with MnO₂ nanowires to produce diimine and the equilibrium of the two‐electron and two‐proton redox process of p‐phenylenediamine on the electrode is changed, and consequently the reductive current is enhanced significantly. At a constant potential of 0 V vs. SCE, other main components of hair dyes including o‐, m‐phenylenediamine, catechol, resorcinol, and p‐dihydroxybenzene do not interfere in the determination of p‐phenylenediamine in the amperometric measurement because of their much lower chemical reaction activities with MnO₂ nanowires. It shows a determination range of 0.2–150 μM and a low detection limit of 50 nM to response p‐phenylenediamine. This modified electrode is successfully used to analyze the amount of p‐phenylenediamine in hair dyes without preseparation procedures.     

Design of Weak‐Donor Alkyl‐Functionalized Push–Pull Pyrene Dyes Exhibiting Enhanced Fluorescence Quantum Yields and Unique On/Off Switching Properties

We designed, synthesized, and evaluated environmentally responsive solvatochromic fluorescent dyes by incorporating weak push–pull moieties. The quantum yields of the push (alkyl)–pull (formyl) pyrene dyes were dramatically enhanced by the introduction of alkyl groups into formylpyrene (1‐formylpyrene: Φ_F=0.10; 3,6,8‐tri‐n‐butyl‐1‐formylpyrene: Φ_F=0.90; in MeOH). The new dyes exhibited unique sensitivity to solvent polarity and hydrogen‐bond donor ability, and specific fluorescence turn‐on/off properties (e.g., 3,6,8‐tri‐n‐butyl‐1‐formylpyrene: Φ_F=0.004, 0.80, 0.37, and 0.90 in hexane, chloroform, DMSO, and MeOH, respectively). Here, the alkyl groups act as weak donors to suppress intersystem crossing by destabilizing the HOMOs of 1‐formylpyrene while maintaining weak intramolecular charge‐transfer properties. By using alkyl groups as weak donors, environmentally responsive, and in particular, pH‐responsive fluorescent materials may be developed in the future.