2‐(4′‐Pyridyl‐N‐oxide)‐Substituted Hemithioindigos as Photoresponsive Guests for a Super Aryl‐Extended Calix[4]pyrrole Receptor

We report the synthesis of two 2‐(4′‐pyridyl‐N‐oxide)‐substituted hemithioindigos (HTIs). We probed their photoisomerization by using UV/Vis and ¹H NMR spectroscopy techniques. Light irradiation at λ=450 nm provoked the isomerization of the HTI Z isomer to the E counterpart to a large extent (≈80 % at the photostationary state). ¹H NMR titration experiments revealed the formation of thermodynamically and kinetically stable 1:1 inclusion complexes of the (Z)‐HTI isomers with a super aryl‐extended host (association constant>10⁴ m ^?1). Photoirradiation at λ=450 nm of the inclusion complexes induced the isomerization of the bound HTI N‐oxide to afford the (E)‐HTI?calix[4]pyrrole complex. We determined accurate association constant values for the 1:1 inclusion complexes of the (Z)‐ and (E)‐HTI isomers by using isothermal titration calorimetry experiments. The results showed that the stability constants of the (E)‐HTI complexes were 2.2–2.8‐fold lower than those of the (Z)‐HTI counterparts, which explains the lack of light‐induced release of the former to the bulk solution.     

Molecular Switching: A Fully Reversible,Optically Active Photochemical Switch Based on a Tetraethynylethene‐1,1′‐Binaphthalene Hybrid System

The synthesis, characterization, and physical properties of a novel, fully reversible, light‐driven molecular switch, (R,R)‐ 1 /(R,R)‐ 2 , based on a tetraethynylethene‐1,1′‐binaphthalene hybrid system are presented. trans‐Configured (R,R)‐ 1 was synthesized in 57% yield by Stille cross‐coupling between stannylated tetraethynylethene 3 and 3‐iodo‐1,1′‐binaphthalene derivative (R)‐ 4 (cf. Scheme 2). The cis‐isomer (R,R)‐ 2 was prepared from (R,R)‐ 1 by photoisomerization. X‐Ray crystal‐structure analyses were obtained for both cis‐ and trans‐forms of the photoswitch (Figs. 1 and 2). In the crystalline state, molecules of the cis‐isomer (R,R)‐ 2 exhibit intramolecular edge‐to‐face (C−H⋅⋅⋅π) interactions between naphthalene rings of the two 1,1‐binaphthalene moieties (Fig. 3). The switching properties were investigated by electronic absorption spectroscopy (Table and Fig. 4): irradiation at λ=398 nm converts trans‐isomer (R,R)‐ 1 into cis‐isomer (R,R)‐ 2 , whereas switching occurs in the opposite direction upon irradiation at λ=323 nm. No thermal interconversion between the two isomers was observed in CH₂Cl₂ at room temperature over a period of 2 – 3 months, and the system possesses good resistance against photofatigue (Fig. 5). Investigations of the circular dichroism of (R,R)‐ 1 and (R,R)‐ 2 in CH₂Cl₂ solution showed that the chiral binaphthalene moieties induce a weak Cotton effect in the achiral tetraethynylethene core (Fig. 6). System (R,R)‐ 1 /(R,R)‐ 2 represents one of the rare switches allowing two‐way photochemical interconversions, not perturbed by thermal‐isomerization pathways.     

Steric Demand and Rate‐determining Step for Photoenolization of Di‐ortho‐substituted Acetophenone Derivatives

Laser flash photolysis of ketone 1 in argon‐saturated methanol yields triplet biradical 1BR (τ = 63 ns) that intersystem crosses to form photoenols Z‐1P (λ_max = 350 nm, τ ~ 10 μs) and E‐1P (λ_max = 350 nm, τ > 6 ms). The activation barrier for Z‐1P re‐forming ketone 1 through a 1,5‐H shift was determined as 7.7 ± 0.3 kcal mol^?1. In contrast, for ketone 2, which has a less sterically hindered carbonyl moiety, laser flash photolysis in argon‐saturated methanol revealed the formation of biradical 2BR (λ_max = 330 nm, τ ~ 303 ns) that intersystem crosses to form photoenol E‐2P (λ_max = 350 nm, τ > 42 μs), but photoenol Z‐2P was not detected. However, in more viscous basic H‐bond acceptor (BHA) solvent, such as hexamethylphosphoramide, triplet 2BR intersystem crosses to form both Z‐2P (λ_max = 370 nm, τ ~ 1.5 μs) and E‐2P. Thus, laser flash photolysis of ketone 2 in methanol reveals that intersystem crossing from 2BR to form Z‐2P is slower than the 1,5‐H shift of Z‐2P, whereas in viscous BHA solvents, the 1,5‐H shift becomes slower than the intersystem crossing from 2BR to Z‐2P. Density functional theory and coupled cluster calculations were performed to support the reaction mechanisms for photoenolization of ketones 1 and 2 .     

Poly[(2‐alkoxy‐5‐methyl‐1,3‐phenylene vinylene)‐alt‐(phenylene vinylene)] derivatives with different contents of cis‐ and trans‐olefins: The effect of the olefin bond geometry and conjugation length on luminescence

Poly[(2‐alkyloxy‐5‐methyl‐1,3‐phenylenevinylene)‐alt‐(1,3‐phenylenevinylene)]s ( 8 ) and poly[(2‐alkyloxy‐5‐methyl‐1,3‐phenylenevinylene)‐alt‐(1,4‐phenylenevinylene)]s ( 10 ) were synthesized by the Wittig reaction to provide materials containing 45–62% cis‐vinylene bonds. The optical characteristics of 8 and 10 were compared with those of their respective isomers, 3 and 4 , the cis‐vinylene contents of which were significantly lower (9–16%). Although a greater fraction of cis‐CH?CH linkages caused the absorption maximum (λ_max) of 8 and 10 to be slightly blueshifted (by ～3–6 nm) from that of 3 and 4 , the impact of the vinylene bond geometry appeared to be negligible on their fluorescence spectra. The fluorescence quantum efficiencies of 8 and 10 were estimated to be approximately 0.25 and 0.72, respectively. Both 8 (λ_max ≈ 445 or 462 nm) and 10 (λ_max ≈ 480 or 506 nm) were electroluminescent, showing effective color tuning by the controlled insertion of m‐phenylene moieties. The external electroluminescence quantum efficiencies were determined to be 4.26 × 10^?3% for 8 and 0.63% for 10 . The cis/trans‐vinylene bond ratio had a great impact on the electroluminescence device performance of 8 but a much smaller impact on the performance of 10 . © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 303–316, 2004     

Through‐Bond/Through‐Space Anion Relay Chemistry Exploiting Vinylepoxides as Bifunctional Linchpins

The development of new bifunctional linchpins that permit the union of diverse building blocks is essential for the synthetic utility of anion relay chemistry (ARC). The design, synthesis, and validation of three vinylepoxide linchpins for through‐bond/through‐space ARC are now reported. For negative charge migration, this class of bifunctional linchpins employs initial through‐bond ARC by an S_N2′ reaction, followed by through‐space ARC exploiting a 1,4‐Brook rearrangement. The trans‐disubstituted vinylepoxide linchpin yields a mixture of E/Z isomers, whereas the cis‐disubstituted and the trans‐trisubstituted vinylepoxide linchpins proceed to deliver three‐component adducts with excellent E selectivity.     

Photoisomerizable and Thermoresponsive N‐isopropylacrylamide–Surfmer Copolymer Hydrogels Prepared upon Electrostatic Self‐Assembly of an Azobenzene Bolaamphiphile

Photoreactive and thermoresponsive N‐isopropylacrylamide (NIPAM)–surfmer copolymer hydrogels containing 4,4′‐di(6‐sulfato‐hexyloxy)azobenzene (DSHA) dianions are described. The functional hydrogels are obtained in a two steps. First a micellar aqueous solution of (11‐(acryloyloxy)undecyl)trimethylammonium bromide (AUTMAB) and NIPAM is exposed to ⁶⁰Co‐gamma irradiation, and a thermoresponsive copolymer gel is obtained. Second, DSHA is included by shrinking the gel at 50 °C and subsequent reswelling in an aqueous solution of DSHA disodium salt at 20 °C. Reswelling is accompanied by electrostatic adsorption of DSHA dianions at the positively charged AUTMAB headgroups replacing the bromide ions. Gels containing trans‐DSHA are transparent yellow at room temperature (λ_max = 370 nm), while gels containing cis‐rich DSHA are orange (λ_max = 460 and 330 nm). Energy dispersive X‐ray measurements indicate that 41% of the bromide ions are exchanged if trans‐DSHA is used for adsorption, and only 7.5% if cis‐DSHA is used. The incorporation of DSHA lowers the lower critical solution temperature (LCST) from 34 to 32 °C. Below the LCST, DSHA can be switched from the trans‐ to the cis‐rich state and vice versa upon irradiation with UV (λ = 366 nm) or visible light (λ ≥ 450 nm). Above the LCST no photoreaction takes place.     

1,2‐Dithienyldicyanoethene‐Based,Visible‐Light‐Driven,Chiral Fluorescent Molecular Switch: Rewritable Multimodal Photonic Devices

Reported here is the first example of a 1,2‐dithienyldicyanoethene‐based visible‐light‐driven chiral fluorescent molecular switch that exhibits reversible trans to cis photoisomerization. The trans form in solution almost completely transforms into the cis form, accompanied by a 10‐fold decrease in its fluorescence intensity within 60 seconds when exposed to green light (520 nm). The reverse isomerization proceeds upon irradiation with blue light (405 nm). When doped into commercially available achiral liquid crystal hosts, this molecular switch efficiently induces luminescent helical superstructures, that is, a cholesteric phase. The intensity of the circularly polarized fluorescence as well as the selective reflection wavelength of the induced cholesteric phases can be reversibly tuned using visible light of two different wavelengths. Optically rewritable photonic devices using cholesteric films containing this molecular switch are described.     

1,2‐Dithienyldicyanoethene‐Based,Visible‐Light‐Driven,Chiral Fluorescent Molecular Switch: Rewritable Multimodal Photonic Devices

Reported here is the first example of a 1,2‐dithienyldicyanoethene‐based visible‐light‐driven chiral fluorescent molecular switch that exhibits reversible trans to cis photoisomerization. The trans form in solution almost completely transforms into the cis form, accompanied by a 10‐fold decrease in its fluorescence intensity within 60 seconds when exposed to green light (520 nm). The reverse isomerization proceeds upon irradiation with blue light (405 nm). When doped into commercially available achiral liquid crystal hosts, this molecular switch efficiently induces luminescent helical superstructures, that is, a cholesteric phase. The intensity of the circularly polarized fluorescence as well as the selective reflection wavelength of the induced cholesteric phases can be reversibly tuned using visible light of two different wavelengths. Optically rewritable photonic devices using cholesteric films containing this molecular switch are described.     

Reactions of Methyl Diazoacetate with (E)‐ and (Z)‐1,2‐Bis(trifluoromethyl)ethene‐1,2‐dicarbonitrile: Novel and Unanticipated Pathways

The cycloadditions of methyl diazoacetate to 2,3‐bis(trifluoromethyl)fumaronitrile ((E)‐ BTE ) and 2,3‐bis(trifluoromethyl)maleonitrile ((Z)‐ BTE ) furnish the 4,5‐dihydro‐1H‐pyrazoles 13 . The retention of dipolarophile configuration proceeds for (E)‐ BTE with > 99.93% and for (Z)‐ BTE with > 99.8% (CDCl₃, 25°), suggesting concertedness. Base catalysis (1,4‐diazabicyclo[2.2.2]octane (DABCO), proton sponge) converts the cycloadducts, trans‐ 13 and cis‐ 13 , to a 94 : 6 equilibrium mixture (CDCl₃, r.t.); the first step is N‐deprotonation, since reaction with methyl fluorosulfonate affords the 4,5‐dihydro‐1‐methyl‐1H‐pyrazoles. Competing with the cis/trans isomerization of 13 is the formation of a bis(dehydrofluoro) dimer (two diastereoisomers), the structure of which was elucidated by IR, ¹⁹F‐NMR, and ¹³C‐NMR spectroscopy. The reaction slows when DABCO is bound by HF, but F^? as base keeps the conversion to 22 going and binds HF. The diazo group in 22 suggests a common intermediate for cis/trans isomerization of 13 and conversion to 22 : reversible ring opening of N‐deprotonated 13 provides 18 , a derivative of methyl diazoacetate with a carbanionic substituent. Mechanistic comparison with the reaction of diazomethane and dimethyl 2,3‐dicyanofumarate, a related tetra‐acceptor‐ethylene, brings to light unanticipated divergencies.     

Pentiptycene‐Derived Light‐Driven Molecular Brakes: Substituent Effects of the Brake Component

Five pentiptycene‐derived stilbene systems ( 1 R ; R =H, OM, NO, Pr, and Bu) have been prepared and investigated as light‐driven molecular brakes that have different‐sized brake components ( 1 H < 1 OM < 1 NO < 1 Pr < 1 Bu ). At room temperature (298 K), rotation of the pentiptycene rotor is fast (k_rot=10⁸–10⁹ s^?1) with little interaction with the brake component in the trans form ((E)‐ 1 R ), which corresponds to the brake‐off state. When the brake is turned on by photoisomerization to the cis form ((Z)‐ 1 R ), the pentiptycene rotation can be arrested on the NMR spectroscopic timescale at temperatures that depend on the brake component. In the cases of (Z)‐ 1 NO , (Z)‐ 1 Pr , and (Z)‐ 1 Bu , the rotation is nearly blocked (k_rot=2–6 s^?1) at 298 K. It is also demonstrated that the rotation is slower in [D₆]DMSO than in CD₂Cl₂. A linear relationship between the free energies of the rotational barrier and the steric parameter A values is present only for (Z)‐ 1 H , (Z)‐ 1 OM , and (Z)‐ 1 NO , and it levels off on going from (Z)‐ 1 NO to (Z)‐ 1 Pr and (Z)‐ 1 Bu . DFT calculations provide insights into the substituent effects in the rotational ground and transition states. The molar reversibility of the E–Z photoswitching is up to 46 %, and both the E and Z isomers are stable under the irradiation conditions.     

trans–cis Photoisomerization of Azobenzene‐Conjugated Dithiolato‐Bipyridine Platinum(II) Complexes: Extension of Photoresponse to Longer Wavelengths and Photocontrollable Tristability

Azobenzene derivatives modified with dithiolato‐bipyridine platinum(II) complexes were synthesized, revealing their highly extended photoresponses to the long wavelength region as well as unique photocontrollable tristability. The absorptions of trans‐ 1 and trans‐ 2 with one azobenzene group on the dithiolene and bipyridine ligands, respectively, cover the range from 300 to 700 nm. These absorptions are ascribed, by means of time‐dependent (TD)DFT calculations, to transitions from dithiolene(π) to bipyridine(π*), namely, interligand charge transfer (CT), π–π*, and n–π* transitions of the azobenzene unit, and π–π* transitions of the bipyridine ligand. In addition, only trans‐ 1 shows distinctive electronic bands, assignable to transitions from the dithiolene(π) to azobenzene(π*), defined as intraligand CT. Complex 1 shows photoisomerization behavior opposite to that of azobenzene: trans‐to‐cis and cis‐to‐trans conversions proceed with 405 and 312 nm irradiation, which correspond to excitation with the intraligand CT, and π–π* bands of the azobenzene and bipyridine units, respectively. In contrast, complex 2 shows photoisomerization similar to that of azobenzene: trans‐to‐cis and cis‐to‐trans transformations occur with 365 and 405 nm irradiation, respectively. Irradiation at 578 nm, corresponding to excitation of the interligand CT transitions, results in cis‐to‐trans conversion of both 1 and 2 , which is the longest wavelength ever reported to effect the photoisomerization of the azobenzene group. The absorption and photochromism of 4 , which has azobenzene groups on both the dithiolato and bipyridine ligands, have characteristics quite similar to those of 1 and 2 , which furnishes 4 with photocontrollable tristability in a single molecule using light at 365, 405, and 578 nm. We also clarified that 1 and 2 have high photoisomerization efficiencies, and good thermal stability of the cis forms. Complexes 3 and 5 have almost the identical photoresponse to those of their positional isomers, complexes 2 and 4 .     

Enzyme‐Mediated Syntheses of the Enantiomers of γ‐Irones

An enzymatic approach to the synthesis of all the possible stereoisomers of (E) and (Z), cis and trans‐γ‐irones in enantiomerically pure form from commercial Irone Alpha^® is described. A very efficient resolution of racemic trans‐γ‐irone, affording both the enantiomers in high ee and chemical purity, is also presented. Olfactory evaluation of (+)‐ and (−)‐ 3b and full configuration assignment of the irone isomers contained in samples of Italian iris oil are reported.     

A Light‐Controlled Molecular Brake with Complete ON–OFF Rotation

A light‐controlled molecular machine based on cyclic azobenzenophanes consisting of a dioxynaphthalene rotating unit and a photoisomerizable dioxyazobenzene unit bridged by methylene spacers is reported. In compounds 1 and 2 , 1,5‐ and 2,6‐dioxynaphthalene moieties, respectively, are linked to p‐dioxyazobenzene by different methylene spacers (n=2 in 1 a and 2 ; n=3 in 1 b ), whereas a 1,5‐dioxynaphthalene moiety is bonded to m‐dioxyazobenzene by bismethylene spacers in 3 . In 1 b and 2 , the naphthalene ring can rotate freely in both the trans and cis states at room temperature. The rotation speed can be controlled either by photoinduced reversible trans–cis (E–Z) isomerization of the azobenzene or by keeping the system at low temperature, as is evident from its NMR spectra. Furthermore, for the first time, we demonstrate a light‐controlled molecular brake, wherein the rotation of the naphthalene moiety through the cyclophane is completely OFF in the trans isomer of compound 3 due to its smaller cavity size. Such restricted rotation imparts planar chirality to the molecule, and the corresponding enantiomers could be resolved by chiral HPLC. However, the rotation of the naphthalene moiety is rendered ON in the cis isomer due to its increased cavity size, and it is manifested experimentally by the racemization of the separated enantiomers by photoinduced E–Z isomerization.     

The Reaction of 2‐X‐1, 2‐Difluoroalk‐1‐enyldifluoroboranes with Xenon Difluoride. A Methodical Approach to 1, 2‐Difluoroalk‐1‐enylxenon(II) Salts

2‐X‐1, 2‐Difluoroalk‐1‐enylxenon(II) salts were prepared by the reaction of XeF₂ with XCF=CFBF₂ (X = F, trans‐H, cis‐Cl, trans‐Cl, cis‐CF₃, cis‐C₂F₅) but no organoxenon(II) compounds were obtained when the trans‐isomers of boranes, trans‐XCF=CFBF₂ (X = CF₃, C₄F₉, C₄H₉, Et₃Si), were used under similar conditions.     

Insight into the Thermal Ring‐Opening Polymerization of Phospha[1]ferrocenophanes

A mixture of cis/trans isomers of phospha[1]ferrocenophanes equipped with one iPr group at the α position to the bridging PhP moiety was prepared. Both isomers (cis‐ 4 and trans‐ 4 ) were obtained as racemates and could be separated so that their thermal properties were investigated individually. The molecular structure of cis‐ 4 was determined by single‐crystal X‐ray analysis showing a tilt angle α=26.35(8)°. Interconversion between both isomers occurred in the melt at elevated temperatures and revealed that the trans isomer is thermodynamically more stable. Structural and thermodynamic data was complemented by DFT calculations (B3PW91/6‐311+G(d,p) and B3PW91‐D3(BJ)/6‐311+G(d,p)). Performance of thermal ring‐opening polymerization (ROP) of trans‐ 4 at 230 °C gave polymers and cyclic oligomers. Gel permeation chromatography (GPC) of the sulfurized polymer resulted in a molecular weight of 62.5 kDa (M_w) and a polydispersity index of 1.39 (PDI). Mass spectrometric analysis of the oligomers showed the presence of cyclic species from dimers to heptamers. After sulfurization, preparative thin layer chromatography led to the separation of three isomeric dimers. Structural characterization of these dimers by single‐crystal X‐ray analysis led to the conclusion that the Fe?Cp bond breaks during the thermal ROP process. A mechanism similar to the known mechanism of the photolytic ROP of ferrocenophanes is proposed.     

Light‐Controlled Regioselective Synthesis of Fullerene Bis‐Adducts

Multi‐functionalization and isomer‐purity of fullerenes are crucial tasks for the development of their chemistry in various fields. In both current main approaches—tether‐directed covalent functionalization and supramolecular masks—the control of regioselectivity requires multi‐step synthetic procedures to prepare the desired tether or mask. Herein, we describe light‐responsive tethers, containing an azobenzene photoswitch and two malonate groups, in the double cyclopropanation of [60]fullerene. The formation of the bis‐adducts and their spectroscopic and photochemical properties, as well as the effect of azobenzene photoswitching on the regiochemistry of the bis‐addition, have been studied. The behavior of the tethers depends on the geometry of the connection between the photoactive core and the malonate moieties. One tether lead to a strikingly different adduct distribution for the E and Z isomers, indicating that the covalent bis‐functionalization of C₆₀ can be controlled by light.     

Reversal of the Stereochemical Course of 1‐Methyl‐1H‐indole Addition to Cinnamaldehyde with cis‐5‐Benzyl‐(2‐fluoromethyl)‐2,3‐dimethylimidazolidin‐4‐ones as Catalysts – a Puzzling ‘Fluorine Effect’

Replacement of the cis‐Me group by CH₂F in the imidazolidinone organocatalyst specified in the title (so‐called McMillan generation‐I catalyst) leads to reversal of the product configuration in the title reaction. The topicity reversal in the nucleophilic addition step must arise either from cis‐addition with respect to the benzylic substituent of an (E)‐iminium ion intermediate or from trans‐addition to the corresponding (Z)‐iminium ion. Mechanistic investigations have not provided evidence for either one of these two possibilities, so far.     

Z‐sinapinic acid: the change of the stereochemistry of cinnamic acids as rational synthesis of a new matrix for carbohydrate MALDI‐MS analysis

Successful application of matrix‐assisted laser desorption/ionization (MALDI) MS started with the introduction of efficient matrices such as cinnamic acid derivatives (i.e. 3,5‐dimethoxy‐4‐hydroxycinnamic acid, SA; α‐cyano‐4‐hydroxycinnamic acid). Since the empirical founding of these matrices, other commercial available cinnamic acids with different nature and location of substituents at benzene ring were attempted. Rational design and synthesis of new cinnamic acids have been recently described too. Because the presence of a rigid double bond in its molecule structure, cinnamic acids can exist as two different geometric isomers, the E‐form and Z‐form. Commercial available cinnamic acids currently used as matrices are the geometric isomers trans or E (E‐cinnamic and trans‐cinnamic acids). As a new rational design of MALDI matrices, Z‐cinnamic acids were synthesized, and their properties as matrices were studied. Their performance was compared with that of the corresponding E‐isomer and classical crystalline matrices (3,5‐dihydroxybenzoic acid; norharmane) in the analysis of neutral/sulfated carbohydrates. Herein, we demonstrate the outstanding performance for Z‐SA. Sulfated oligosaccharides were detected in negative ion mode, and the dissociation of sulfate groups was almost suppressed. Additionally, to better understand the quite different performance of each geometric isomer as matrix, the physical and morphological properties as well as the photochemical stability in solid state were studied. The influence of the E/Z photoisomerization of the matrix during MALDI was evaluated. Finally, molecular modeling (density functional theory study) of the optimized geometry and stereochemistry of E‐cinnamic and Z‐cinnamic acids revealed some factors governing the analyte–matrix interaction. Copyright © 2013 John Wiley & Sons, Ltd.     

The keto→enol photoisomerization of N‐salicilydenemethylfurylamine: Nonadiabatic ab initio dynamics simulation

The photoinduced isomerization of cis‐keto and trans‐keto isomers in N‐salicilydenemethylfurylamine has been studied using the surface‐hopping approach at the CASSCF level of theory. After the cis‐keto or trans‐keto isomer is excited to S₁ state, the molecule initially moves to a excited‐state local minimum. The torsional motion around relative bonds in the chain drives the molecule to approach a keto‐form conical intersection and then nonadiabatic transition occurs. According to our full‐dimensional dynamics simulations, the trans‐keto and enol photoproducts are responsible for the photochromic effect of cis‐keto isomer excited to S₁ state, while no enol isomer was obtained in the photoisomerization of trans keto on excitation. The cis keto to enol and cis keto to trans keto isomerizations are reversible photochemical reactions. It is confirmed that this aromatic Schiff base is a potential molecular switch. Furthermore, the torsion of C N bond occurs in the radiationless decay of trans‐keto isomer, while it is completely suppressed by an intramolecular hydrogen bonding interaction in the dynamics of cis‐keto form. Moreover, the excited‐state lifetime of cis keto is longer than that of trans‐keto form due to the O···H N hydrogen bond.     

反式-1,4,5,8-四硝基-1,4,5,8-四氮杂萘烷异构体热解机理与稳定性的理论研究

运用密度泛函理论和半经验分子轨道方法,对一系列高能杂环硝胺—反式-1,4,5,8-四硝基-1,4,5,8-四氮杂萘烷异构体的热解机理和稳定性进行了系统地计算研究。在B3LYP/6-31G**和PM3水平上,分别计算了标题物的化学键离解能(BDE)和热解反应活化能(Ea),并根据BDE和Ea数值考察了硝胺取代基对化合物稳定性和热解机理的影响;同时,还详细考察了BDE与Ea、化学键重叠布居数、前线轨道能级以及能隙之间的相关性。结果表明,由BDE、Ea和静态电子结构参数推断的标题物热稳定性和热解机理的结论基本是一致的,N-NO2键均裂是标题物的热解引发步骤,间位取代异构体较对位取代异构体稳定,而邻位取代的异构体稳定性最差。