Encapsulation of a Porous Organic Cage into the Pores of a Metal–Organic Framework for Enhanced CO2 Separation

We present a facile approach to encapsulate functional porous organic cages (POCs) into a robust MOF by an incipient‐wetness impregnation method. Porous cucurbit[6]uril (CB6) cages with high CO₂ affinity were successfully encapsulated into the nanospace of Cr‐based MIL‐101 while retaining the crystal framework, morphology, and high stability of MIL‐101. The encapsulated CB6 amount is controllable. Importantly, as the CB6 molecule with intrinsic micropores is smaller than the inner mesopores of MIL‐101, more affinity sites for CO₂ are created in the resulting CB6@MIL‐101 composites, leading to enhanced CO₂ uptake capacity and CO₂/N₂, CO₂/CH₄ separation performance at low pressures. This POC@MOF encapsulation strategy provides a facile route to introduce functional POCs into stable MOFs for various potential applications.     

CO2在氨基改性MIL-101(Cr)中吸附的分子模拟

采用实验与分子模拟结合的方法研究298 K下CO₂在氨基改性得到的MIL-101（Cr）-NH₂和MIL-101（Cr）-ED（ED：乙二胺）上的吸附性能。比较MIL-101（Cr）、MIL-101（Cr）-NH₂和MIL-101（Cr）-ED的吸附等温线与吸附热的结果,表明采用直接合成改性法得到的MIL-101（Cr）-NH₂比采用合成后再改性得到的MIL-101（Cr）-ED有更高的CO₂吸附容量。进一步比较密度分布图和径向密度分布曲线,分析CO₂在氨基改性MIL-101（Cr）中的吸附位,表明在低压下CO₂首先吸附在MIL-101（Cr）微孔的超级四面体中,随着吸附压力的增大逐渐填充到更大的孔中。氨基的存在增加了CO₂的吸附位点,使MIL-101（Cr）-NH₂具有较高CO₂吸附容量;同时MIL-101（Cr）-ED中的ED分子的存在增加了CO₂的吸附位点,使MIL-101（Cr）-ED也具有较高CO₂吸附容量;但是MIL-101（Cr）-ED中的ED分子占据了MIL-101（Cr）中Cr的吸附位点,使Cr对CO₂的吸附强度减弱,同时可吸附位点少于MIL-101（Cr）-NH₂,导致其对CO₂的吸附容量少于MIL-101（Cr）-NH₂。     

Enhanced CO2 Adsorption Affinity in a NbO‐type MOF Constructed from a Low‐Cost Diisophthalate Ligand with a Piperazine‐Ring Bridge

A metal–organic framework (NPC‐6) with an NbO topology based on a piperazine ring‐bridged diisophthalate ligand was synthesized and characterized. The incorporated piperazine group leads to an enhanced adsorption affinity for CO₂ in NPC‐6, in which the CO₂ uptake is 4.83 mmol g^?1 at 293 K and 1 bar, ranking among the top values of CO₂ uptake on MOF materials. At 0.15 bar and 293 K, the NPC‐6 adsorbs 1.07 mmol g^?1 of CO₂, which is about 55.1 % higher than that of the analogue MOF NOTT‐101 under the same conditions. The enhanced CO₂ uptake combined with comparable uptakes for CH₄ and N₂ leads to much higher selectivities for CO₂/CH₄ and CO₂/N₂ gas mixtures on NPC‐6 than on NOTT‐101. Furthermore, an N‐alkylation is used in the synthesis of the PDIA ligand, leading to a much lower cost compared with that in the synthesis of ligands in the NOTT series, as the former does not require a palladium‐based catalyst and borate esters. Thus, we conclude that NPC‐6 is a promising candidate for CO₂ capture applications.     

CO2在氨基改性MIL-101(Cr)中吸附的分子模拟

采用实验与分子模拟结合的方法研究298 K下CO_2在氨基改性得到的MIL-101(Cr)-NH_2和MIL-101(Cr)-ED(ED:乙二胺)上的吸附性能。比较MIL-101(Cr)、MIL-101(Cr)-NH_2和MIL-101(Cr)-ED的吸附等温线与吸附热的结果,表明采用直接合成改性法得到的MIL-101(Cr)-NH_2比采用合成后再改性得到的MIL-101(Cr)-ED有更高的CO_2吸附容量。进一步比较密度分布图和径向密度分布曲线,分析CO_2在氨基改性MIL-101(Cr)中的吸附位,表明在低压下CO_2首先吸附在MIL-101(Cr)微孔的超级四面体中,随着吸附压力的增大逐渐填充到更大的孔中。氨基的存在增加了CO_2的吸附位点,使MIL-101(Cr)-NH_2具有较高CO_2吸附容量;同时MIL-101(Cr)-ED中的ED分子的存在增加了CO_2的吸附位点,使MIL-101(Cr)-ED也具有较高CO_2吸附容量;但是MIL-101(Cr)-ED中的ED分子占据了MIL-101(Cr)中Cr的吸附位点,使Cr对CO_2的吸附强度减弱,同时可吸附位点少于MIL-101(Cr)-NH_2,导致其对CO_2的吸附容量少于MIL-101(Cr)-NH_2。     

Encapsulation of a Porous Organic Cage into the Pores of a Metal–Organic Framework for Enhanced CO2 Separation

We present a facile approach to encapsulate functional porous organic cages (POCs) into a robust MOF by an incipient-wetness impregnation method. Porous cucurbit[6]uril (CB6) cages with high CO₂ affinity were successfully encapsulated into the nanospace of Cr-based MIL-101 while retaining the crystal framework, morphology, and high stability of MIL-101. The encapsulated CB6 amount is controllable. Importantly, as the CB6 molecule with intrinsic micropores is smaller than the inner mesopores of MIL-101, more affinity sites for CO₂ are created in the resulting CB6@MIL-101 composites, leading to enhanced CO₂ uptake capacity and CO₂/N₂, CO₂/CH₄ separation performance at low pressures. This POC@MOF encapsulation strategy provides a facile route to introduce functional POCs into stable MOFs for various potential applications.     

Visible‐light photocatalytic activity of Ag@MIL‐125(Ti) microspheres

Ag nanoparticle (NP)‐decorated MIL‐125(Ti) microspheres (Ag@MIL‐125(Ti)) were firstly fabricated via a facile hydrothermal and following photo‐reduction method. The photocatalysts were characterized using X‐ray diffraction, scanning and transmission electron microscopies, X‐ray photoelectron spectroscopy and UV–visible diffuse reflectance spectroscopy. The characterization results indicated that Ag NPs were dispersed on the surface of MIL‐125(Ti) microspheres, and the Ag NPs had a uniform diameter of about 40 nm. The composites exhibited excellent visible‐light absorption, due to the modification with the Ag NPs. The photocatalytic activity for the visible‐light‐promoted degradation of Rhodamine B was improved through the optimization of the amount of Ag loaded as a co‐catalyst, this amount being determined as 3 wt%. Additionally, studies performed using radical scavengers indicated that O₂^? and e^? served as the main reactive species. The catalyst can be reused at least five times without significant loss of its catalytic activity. Furthermore, a photocatalytic mechanism for degradation of organics over Ag@MIL‐125(Ti) is also proposed. Copyright © 2015 John Wiley & Sons, Ltd.     

MIL-101(Cr) Microporous Nanocrystals Intercalating Graphene Oxide Membrane for Efficient Hydrogen Purification

Graphene oxide (GO) is a promising two-dimensional building block for fabricating high-performance gas separation membranes. Whereas the tortuous transport pathway may increase the transport distance and lead to a low gas permeation rate, introducing spacers into GO laminates is an effective strategy to enlarge the interlayer channel for enhanced gas permeance. Herein, we propose to intercalate CO₂-philic MIL-101(Cr) metal-organic framework nanocrystals into the GO laminates to construct a 2D/3D hybrid structure for gas separation. The interlayer channels were partially opened up to accelerate gas permeation. Meanwhile, the intrinsic pores of MIL-101 provided additional transport pathways, and the affinity of MIL-101 to CO₂ molecules resulted in higher H₂/CO₂ diffusion selectivity, leading to a simultaneous enhancement in gas permeance and separation selectivity. The MIL-101(Cr)/GO membrane with optimal structures exhibited outstanding and stable mixed-gas separation performance with H₂ permeance of 67.5 GPU and H₂/CO₂ selectivity of 30.3 during the 120-h continuous test, demonstrating its potential in H₂ purification application.     

Surface Modification of Polyimide Membranes by Diamines for H2 and CO2 Separation

Summary: The separation of H₂/CO₂ is technologically important to produce the next generation fuel source, hydrogen, from synthesis gas. However, the separation efficiency achieved by polymeric membranes is usually very low because of both unfavourable diffusivity selectivity and solubility selectivity between H₂ and CO₂. A series of novel diamino‐modified polyimides has been discovered to enhance the separation capability of polyimide membranes especially for H₂ and CO₂ separation. Both pure gas and mixed gas tests have been conducted. The ideal H₂/CO₂ selectivity in pure gas tests is 101, which is far superior to other polymeric membranes and is well above the Robeson's upper‐bound curve. Mixed gas tests show an ideal selectivity of 42 for the propane‐1,3‐diamine‐modified polyimide. The lower selectivity is a result of the sorption competition between H₂ and the highly condensable CO₂ molecules. However, both pure gas and mixed gas data are better than other polymeric membranes and above the Robeson's upper‐bound curve. It is evident that the proposed modification methods can alter the physicochemical structure of polyimide membranes with superior separation performance for H₂ and CO₂ separation.

Both pure gas and mixed gas separation properties of H₂/CO₂ for membranes derived from 6FDA‐durene with respect to the upper‐bound curve.     

Graphene Oxide Membranes with Heterogeneous Nanodomains for Efficient CO2 Separations

Achieving high membrane performance in terms of gas permeance and carbon dioxide selectivity is an important target in carbon capture. Aiming to manipulate the channel affinity towards CO₂ to implement efficient separations, gas separation membranes containing CO₂‐philic and non‐CO₂‐philic nanodomains in the interlayer channels of graphene oxide (GO) were formed by intercalating poly(ethylene glycol) diamines (PEGDA). PEGDA reacts with epoxy groups on the GO surface, constructing CO₂‐philic nanodomains and rendering a high sorption capacity, whereas unreacted GO surfaces give non‐CO₂‐philic nanodomains, rendering low‐friction diffusion. Owing to the orderly stacking of nanochannels through cross‐linking and the heterogeneous nanodomains with moderate CO₂ affinity, a GO‐PEGDA500 membrane exhibits a high CO₂ permeance of 175.5 GPU and a CO₂/CH₄ selectivity of 69.5, which is the highest performance reported for dry‐state GO‐stacking membranes.     

Adsorption separation of CO2 and N2 on MIL-101 metal-organic framework and activated carbon

In this work, the CO₂ and N₂ adsorption properties of MIL-101 metal-organic framework (MOF) and activated carbon (AC) were investigated using a standard gravimetric method within the pressure range of 0–30 bar and at four different temperatures (298, 308, 318 and 328 K). The dual-site Langmuir–Freundlich (DSLF) model was used to describe the CO₂ adsorption behaviors on these two adsorbents. The diffusion coefficients and activation energy E _a for diffusion of CO₂ in the MIL-101 and AC samples were estimated separately. Results showed that the isosteric heat of CO₂ adsorption on the MIL-101 at zero loading was much higher than that on the AC due to a much stronger interaction between CO₂ molecule and the unsaturated metal sites Cr³⁺ on MIL-101. Meanwhile, the dramatically decreased isosteric heats of CO₂ adsorption on MIL-101 indicated a more heterogeneous surface of MIL-101. Furthermore, the adsorption kinetic behaviors of CO₂ on the two samples can be well described by the micropore diffusion model. With the increase of temperature, the diffusion coefficients of CO₂ in the two samples both increased. The activation energy E _a for diffusion of CO₂ in MIL-101 was slightly lower than that in AC, suggesting that MIL-101 was much favorable for the CO₂ adsorption. The CO₂/N₂ selectivities on MIL-101 and AC were separately estimated to be 13.7 and 9.2 using Henry law constant, which were much higher than those on other MOFs.     

Influence of the Base on Pd@MIL‐101‐NH2(Cr) as Catalyst for the Suzuki–Miyaura Cross‐Coupling Reaction

The chemical stability of metal–organic frameworks (MOFs) is a major factor preventing their use in industrial processes. Herein, it is shown that judicious choice of the base for the Suzuki–Miyaura cross‐coupling reaction can avoid decomposition of the MOF catalyst Pd@MIL‐101‐NH₂(Cr). Four bases were compared for the reaction: K₂CO₃, KF, Cs₂CO₃ and CsF. The carbonates were the most active and achieved excellent yields in shorter reaction times than the fluorides. However, powder XRD and N₂ sorption measurements showed that the MOF catalyst was degraded when carbonates were used but remained crystalline and porous with the fluorides. XANES measurements revealed that the trimeric chromium cluster of Pd@MIL‐101‐NH₂(Cr) is still present in the degraded MOF. In addition, the different countercations of the base significantly affected the catalytic activity of the material. TEM revealed that after several catalytic runs many of the Pd nanoparticles (NPs) had migrated to the external surface of the MOF particles and formed larger aggregates. The Pd NPs were larger after catalysis with caesium bases compared to potassium bases.     

Electrochemical and Surface Analysis Studies on the Carbon Dioxide Corrosion of X‐65 Carbon Steel

A comprehensive study of the CO₂ corrosion of carbon steel (X‐65) at low partial pressures of CO₂ is reported in this paper. Field emission scanning electron microscopy (FESEM), Raman spectroscopy (RS), synchrotron radiation‐grazing incidence X‐ray diffraction (SR‐GIXRD), and electrode kinetic studies have confirmed that chukanovite, magnetite and siderite are the main corrosion products at low partial pressures of CO₂. Chukanovite forms predominantly in the presence of CO₂, while magnetite was found to be the major corrosion product in the absence of CO₂, although the majority of previous work based on conventional ex‐situ materials characterization techniques has implied that siderite is the main corrosion product. Here, it is shown that the nature of corrosion products is strongly dependent on the experimental conditions at low pressures of CO₂, which has not been elucidated in previous studies. Accordingly, this study has made a significant contribution to identifying the true nature of corrosion scales formed at low partial pressures of CO₂ allowing the development of effective anti‐corrosive agents for the control and prevention of carbon steel corrosion at low CO₂ partial pressures.     

Highly Efficient,Selective, and Stable CO2 Electroreduction on a Hexagonal Zn Catalyst

Electrocatalytic CO₂ conversion into fuel is a prospective strategy for the sustainable energy production. However, still many parts of the catalyst such as low catalytic activity, selectivity, and stability are challenging. Herein, a hierarchical hexagonal Zn catalyst showed highly efficient and, more importantly, stable performance as an electrocatalyst for selectively producing CO. Moreover, we found that its high selectivity for CO is attributed to morphology. In electrochemical analysis, Zn (101) facet is favorable to CO formation whereas Zn (002) facet favors the H₂ evolution during CO₂ electrolysis. Indeed, DFT calculations showed that (101) facet lowers a reduction potential for CO₂ to CO by more effectively stabilizing a ^.COOH intermediate than (002) facet. This further suggests that tuning the crystal structure to control (101)/(002) facet ratio of Zn can be considered as a key design principle to achieve a desirable product from Zn catalyst.     

Highly Rechargeable Lithium‐CO2 Batteries with a Boron‐ and Nitrogen‐Codoped Holey‐Graphene Cathode

Metal‐air batteries, especially Li‐air batteries, have attracted significant research attention in the past decade. However, the electrochemical reactions between CO₂ (0.04 % in ambient air) with Li anode may lead to the irreversible formation of insulating Li₂CO₃, making the battery less rechargeable. To make the Li‐CO₂ batteries usable under ambient conditions, it is critical to develop highly efficient catalysts for the CO₂ reduction and evolution reactions and investigate the electrochemical behavior of Li‐CO₂ batteries. Here, we demonstrate a rechargeable Li‐CO₂ battery with a high reversibility by using B,N‐codoped holey graphene as a highly efficient catalyst for CO₂ reduction and evolution reactions. Benefiting from the unique porous holey nanostructure and high catalytic activity of the cathode, the as‐prepared Li‐CO₂ batteries exhibit high reversibility, low polarization, excellent rate performance, and superior long‐term cycling stability over 200 cycles at a high current density of 1.0 A g⁻¹. Our results open up new possibilities for the development of long‐term Li‐air batteries reusable under ambient conditions, and the utilization and storage of CO₂.     

Highly Efficient,Selective, and Stable CO2 Electroreduction on a Hexagonal Zn Catalyst

Electrocatalytic CO₂ conversion into fuel is a prospective strategy for the sustainable energy production. However, still many parts of the catalyst such as low catalytic activity, selectivity, and stability are challenging. Herein, a hierarchical hexagonal Zn catalyst showed highly efficient and, more importantly, stable performance as an electrocatalyst for selectively producing CO. Moreover, we found that its high selectivity for CO is attributed to morphology. In electrochemical analysis, Zn (101) facet is favorable to CO formation whereas Zn (002) facet favors the H₂ evolution during CO₂ electrolysis. Indeed, DFT calculations showed that (101) facet lowers a reduction potential for CO₂ to CO by more effectively stabilizing a ^.COOH intermediate than (002) facet. This further suggests that tuning the crystal structure to control (101)/(002) facet ratio of Zn can be considered as a key design principle to achieve a desirable product from Zn catalyst.     

Long‐Term Photostability in Terephthalate Metal–Organic Frameworks

Prolonged (weeks) UV/Vis irradiation under Ar of UiO‐66(Zr), UiO66 Zr‐NO₂, MIL101 Fe, MIL125 Ti‐NH₂, MIL101 Cr and MIL101 Cr(Pt) shows that these MOFs undergo photodecarboxylation of benzenedicarboxylate (BDC) linker in a significant percentage depending on the structure and composition of the material. Routine characterization techniques such as XRD, UV/Vis spectroscopy and TGA fail to detect changes in the material, although porosity and surface area change upon irradiation of powders. In contrast to BCD‐containing MOFs, zeolitic imidazolate ZIF‐8 does not evolve CO₂ or any other gas upon irradiation.     

Reduction of Carbon Dioxide to Formate at Low Overpotential Using a Superbase Ionic Liquid

A new low‐energy pathway is reported for the electrochemical reduction of CO₂ to formate and syngas at low overpotentials, utilizing a reactive ionic liquid as the solvent. The superbasic tetraalkyl phosphonium ionic liquid [P₆₆₆₁₄][124Triz] is able to chemisorb CO₂ through equimolar binding of CO₂ with the 1,2,4‐triazole anion. This chemisorbed CO₂ can be reduced at silver electrodes at overpotentials as low as 0.17 V, forming formate. In contrast, physically absorbed CO₂ within the same ionic liquid or in ionic liquids where chemisorption is impossible (such as [P₆₆₆₁₄][NTf₂]) undergoes reduction at significantly increased overpotentials, producing only CO as the product.     

Morphology‐Engineered Highly Active and Stable Ru/TiO2 Catalysts for Selective CO Methanation

Ru/TiO₂ catalysts exhibit an exceptionally high activity in the selective methanation of CO in CO₂‐ and H₂‐rich reformates, but suffer from continuous deactivation during reaction. This limitation can be overcome through the fabrication of highly active and non‐deactivating Ru/TiO₂ catalysts by engineering the morphology of the TiO₂ support. Using anatase TiO₂ nanocrystals with mainly {001}, {100}, or {101} facets exposed, we show that after an initial activation period Ru/TiO₂‐{100} and Ru/TiO₂‐{101} are very stable, while Ru/TiO₂‐{001} deactivates continuously. Employing different operando/in situ spectroscopies and ex situ characterizations, we show that differences in the catalytic stability are related to differences in the metal–support interactions (MSIs). The stronger MSIs on the defect‐rich TiO₂‐{100} and TiO₂‐{101} supports stabilize flat Ru nanoparticles, while on TiO₂‐{001} hemispherical particles develop. The former MSIs also lead to electronic modifications of Ru surface atoms, reflected by the stronger bonding of adsorbed CO on those catalysts than on Ru/TiO₂‐{001}.     

A Rechargeable Li‐CO2 Battery with a Gel Polymer Electrolyte

The utilization of CO₂ in Li‐CO₂ batteries is attracting extensive attention. However, the poor rechargeability and low applied current density have remained the Achilles’ heel of this energy device. The gel polymer electrolyte (GPE), which is composed of a polymer matrix filled with tetraglyme‐based liquid electrolyte, was used to fabricate a rechargeable Li‐CO₂ battery with a carbon nanotube‐based gas electrode. The discharge product of Li₂CO₃ formed in the GPE‐based Li‐CO₂ battery exhibits a particle‐shaped morphology with poor crystallinity, which is different from the contiguous polymer‐like and crystalline discharge product in conventional Li‐CO₂ battery using a liquid electrolyte. Accordingly, the GPE‐based battery shows much improved electrochemical performance. The achieved cycle life (60 cycles) and rate capability (maximum applied current density of 500 mA g⁻¹) are much higher than most of previous reports, which points a new way to develop high‐performance Li‐CO₂ batteries.     

Molybdenum Carbide as Alternative Catalysts to Precious Metals for Highly Selective Reduction of CO2 to CO

Rising atmospheric CO₂ is expected to have negative effects on the global environment from its role in climate change and ocean acidification. Utilizing CO₂ as a feedstock to make valuable chemicals is potentially more desirable than sequestration. A substantial reduction of CO₂ levels requires a large‐scale CO₂ catalytic conversion process, which in turn requires the discovery of low‐cost catalysts. Results from the current study demonstrate the feasibility of using the non‐precious metal material molybdenum carbide (Mo₂C) as an active and selective catalyst for CO₂ conversion by H₂.