Controlled Sol–Gel Transitions of a Thermoresponsive Polymer in a Photoswitchable Azobenzene Ionic Liquid as a Molecular Trigger

Producing ionic liquids (ILs) that function as molecular trigger for macroscopic change is a challenging issue. Photoisomerization of an azobenzene IL at the molecular level evokes a macroscopic response (light‐controlled mechanical sol–gel transitions) for ABA triblock copolymer solutions. The A endblocks, poly(2‐phenylethyl methacrylate), show a lower critical solution temperature in the IL mixture containing azobenzene, while the B midblock, poly(methyl methacrylate), is compatible with the mixture. In a concentrated polymer solution, different gelation temperatures were observed in it under dark and UV conditions. Light‐controlled sol–gel transitions were achieved by a photoresponsive solubility change of the A endblocks upon photoisomerization of the azobenzene IL. Therefore, an azobenzene IL as a molecular switch can tune the self‐assembly of a thermoresponsive polymer, leading to macroscopic light‐controlled sol–gel transitions.     

Development of In Situ Electrochemical Scanning Electron Microscopy with Ionic Liquids as Electrolytes

We report that ionic liquids (ILs) can be observed by electron microscopy without any charging of the liquid. Based on this, we present an in situ electrochemical scanning electron microscopy (in situ ECSEM) system. The key technology that enables in situ ECSEM is that charges can be removed from an IL by grounding it with a Pt wire, even if the IL is in an insulating glass cell. As a first demonstration, we describe the redox reaction of a polypyrrole (PPy) film accompanied by changes in its thickness when it is polarized by the film‐deposited Pt electrode in the IL. Furthermore, energy‐dispersive X‐ray fluorescence (EDX) analysis can be employed for the electrode polarized in the IL. The component analysis by EDX of PPy in an IL containing K⁺ as a marker, reveals doping of electrolyte cations into the PPy film upon the latter′s reduction and dedoping of cations from the film upon oxidation.     

Temperature-responsive ionic liquid/water interfaces: relation between hydrophilicity of ions and dynamic phase change

Phase separation between ionic liquids (ILs) and molecular liquids is of interest physico-chemically, and also has industrial relevance. IL/water mixtures are of great interest in many fields. Unlike static phase separation between IL and water, dynamic shifts of IL/water mixtures between a homogeneous mixture and separate phases have a wide variety of applications. The miscibility of ILs with water generally increases upon heating, and a few ILs undergo a lower critical solution temperature (LCST)-type phase transition with water in which the separated biphases become miscible upon cooling. As the phase transition is controlled by changing the temperature by a few degrees, the LCST-type phase response of IL/water mixtures makes it possible to use ILs as solvents in various energy-saving processes. Since many hydrophilic ILs do not undergo phase separation with water, we aim to determine the necessary conditions under which hydrophobic ILs undergo the phase transition. Based on physico-chemical analysis of many hydrophobic ILs that undergo a phase separation after mixing with water, we find there is a particular range of "hydrophilicity" of these hydrophobic ILs within which the LCST-type phase transition is possible. Accordingly, a hydrophilicity index (HI) of ILs is proposed, in terms of the number of water molecules in the separated IL phase. The HI value proves to be a good indicator of the phase behaviour of IL/water mixtures, as well as their phase transition temperature. Potential application of the LCST-type phase change to the selective extraction of water-soluble proteins is also summarised.     

Synthesis and Improved Properties of Hypergolic Boronium‐Based Ionic Liquids

A series of asymmetric monoimidazolium dihydroboronium‐based ionic liquids (ILs) were synthesized from amine‐boranes. All the resulting ILs were fully characterized by ¹H and ¹³C NMR, IR spectroscopy, elemental analysis or high resolution mass spectrum. Compared with the symmetric bisimidazolium dihydroboronium‐based ILs, these new ILs exhibited improved properties with shorter ignition delay times (IDs), higher densities, and lower phase transition temperature showing the promising application potential as green propellants.     

Effect of curcumin on liposome: curcumin as a molecular probe for monitoring interaction of ionic liquids with 1,2-dipalmitoyl-sn-glycero-3-phosphocholine liposome

Recent increase and wider use of ionic liquids (ILs) for various applications has drawn attention to their toxicological consequence on human health. The present study explores effects of three different kinds of widely used ILs, such as 1‐methyl‐3‐octylimidazolium chloride, 1‐buytl‐3‐methyl imadazolium tetrafluoroborate and 1‐benzyl‐3‐methyl imidazolium tetrafluoroborate, on liposome properties of 1,2‐dipalmitoyl‐sn‐glycero‐3‐phosphocholine (DPPC) by applying curcumin as molecular probe. Fluorescence intensity of curcumin is reported as a novel rotor which is sensitive to viscosity and thus the fluidity of the solvent. It follows a linear relationship of log fluorescence vs viscosity as proposed by Förster–Hoffmann equation. Curcumin binds strongly to liposome. At low concentration, the lipophilic drug curcumin does not appreciably influence the phase transition temperature of DPPC but as concentration reaches high levels significantly depresses the phase transition temperature. ILs diminish membrane fluidity. 1‐methyl‐3‐octylimidazolium chloride disorders membrane properties by lowering the phase transition as is observed for higher concentration of curcumin, but 1‐buytl‐3‐methyl imidazolium tetrafluoroborate and 1‐benzyl‐3‐methyl imidazolium tetrafluoroborate do not modify phase transition temperature perceptibly; rather they broaden the phase transition at low molar concentration ratio. The three different kinds of ILs under study behave similarly at a high IL:DPPC ratio (1:2), while they behave differently at lower ratios (1:10–1:5).     

Introduction of an Ionic Liquid into the Micropores of a Metal–Organic Framework and Its Anomalous Phase Behavior

Controlling the dynamics of ionic liquids (ILs) is a significant issue for widespread use. Metal–organic frameworks (MOFs) are ideal host materials for ILs because of their small micropores and tunable host–guest interactions. Herein, we demonstrate the first example of an IL incorporated within the micropores of a MOF. The system studied consisted of EMI‐TFSA (1‐ethyl‐3‐methylimidazolium bis(trifluoromethylsulfonyl)amide) and ZIF‐8 (composed of Zn(MeIM)₂; H(MeIM)=2‐methylimidazole) as the IL and MOF, respectively. Construction of the EMI‐TFSA in ZIF‐8 was confirmed by X‐ray powder diffraction, nitrogen gas adsorption, and infrared absorption spectroscopy. Differential scanning calorimetry and solid‐state NMR measurements showed that the EMI‐TFSA inside the micropores demonstrated no freezing transition down to 123 K, whereas bulk EMI‐TFSA froze at 231 K. Such anomalous phase behavior originates from the nanosize effect of the MOF on the IL. This result provides a novel strategy for stabilizing the liquid phase of the ILs down to a lower temperature region.     

Ionic liquids: solvents and sorbents in sample preparation

The applications of ionic liquids (ILs) and IL‐derived sorbents are rapidly expanding. By careful selection of the cation and anion components, the physicochemical properties of ILs can be altered to meet the requirements of specific applications. Reports of IL solvents possessing high selectivity for specific analytes are numerous and continue to motivate the development of new IL‐based sample preparation methods that are faster, more selective, and environmentally benign compared to conventional organic solvents. The advantages of ILs have also been exploited in solid/polymer formats in which ordinarily nonspecific sorbents are functionalized with IL moieties in order to impart selectivity for an analyte or analyte class. Furthermore, new ILs that incorporate a paramagnetic component into the IL structure, known as magnetic ionic liquids (MILs), have emerged as useful solvents for bioanalytical applications. In this rapidly changing field, this Review focuses on the applications of ILs and IL‐based sorbents in sample preparation with a special emphasis on liquid phase extraction techniques using ILs and MILs, IL‐based solid‐phase extraction, ILs in mass spectrometry, and biological applications.     

Poly(dimethylsiloxane)‐Supported Ionogels with a High Ionic Liquid Loading

The immiscibility of poly(dimethylsiloxane) (PDMS) and ionic liquids (ILs) was overcome to create PDMS‐supported IL gels (ionogels) with IL loadings of up to 80 % by mass through a simple sol–gel reaction at room temperature. By stirring a mixture of a functionalized PDMS oligomer, formic acid, and an IL (or lithium‐in‐IL solution), a resin was formed that could be cast to create a freestanding, flexible ionogel. PDMS‐supported ionogels exhibited favorable ionic conductivity (ca. 3 mS cm^?1) and excellent mechanical behavior (elastic modulus: ca. 60 kPa; fatigue life: >5000 cycles; mechanically stable at temperatures up to 200 °C). The activation energy of ionic conductivity was shown to be nearly identical for the ionogel and the neat IL, in contrast to ionogel systems wherein the scaffold material is miscible with the IL. This similarity indicates that IL/scaffold chemical interactions are key to the understanding of ionogel electrical performance, especially at elevated temperatures.     

Nonaqueous Lyotropic Ionic Liquid Crystals: Preparation,Characterization, and Application in Extraction

A class of new ionic liquid (IL)‐based nonaqueous lyotropic liquid crystals (LLCs) and the development of an efficient IL extraction process based on LC chemistry are reported. The nonaqueous LLCs feature extraordinarily high extraction capacity, excellent separation selectivity, easy recovery, and biocompatibility. This work also demonstrates that the introduction of self‐assembled anisotropic nanostructures into an IL system is an efficient way to overcome the intrinsically strong polarity of ILs and enhances the molecular recognition ability of ILs. The distribution coefficients of IL‐based LLCs for organic compounds with H‐bond donors reached unprecedented values of 50–60 at very high feed concentrations (>100 mg mL^?1), which are 800–1000 times greater than those of common ILs as well as traditional organic and polymer extractants. The IL‐based nonaqueous LLCs combining the unique properties of ILs and LCs open a new avenue for the development of high‐performance extraction methods.     

On the Dynamic Interaction of n‐Butane with Imidazolium‐Based Ionic Liquids

The impact of a reactant from the gas phase on the surface of a liquid and its transfer through this gas/liquid interface are crucial for various concepts applying ionic liquids (ILs) in catalysis. We investigated the first step of the adsorption dynamics of n‐butane on a series of 1‐alkyl‐3‐methylimidazolium bis(trifluoromethanesulfonyl)imide ILs ([C_nC₁Im][Tf₂N]; n=1, 2, 3, 8). Using a supersonic molecular beam in ultra‐high vacuum, the trapping of n‐butane on the frozen ILs was determined as a function of surface temperature, between 90 and 125 K. On the C₈‐ and C₃‐ILs, n‐butane adsorbs at 90 K with an initial trapping probability of ≈0.89. The adsorption energy increases with increasing length of the IL alkyl chain, whereas the ionic headgroups seem to interact only weakly with n‐butane. The absence of adsorption on the C₁‐ and C₂‐ILs is attributed to a too short residence time on the IL surface to form nuclei for condensation even at 90 K.     

Influence of different alkyl‐methylimidazolium tetrafluoroborate ionic liquids on the structure of pebax® films. Consequences on thermal,mechanical, and water sorption and diffusion properties

In this work, three ionic liquids (ILs) differing by the length of the alkyl chain linked to their cation were incorporated in a Pebax^® copolymer matrix through a solvent cast process for composition from 0 to 70 wt % IL. The copolymer/IL miscibility was investigated via IR Spectroscopy, Differential Scanning Calorimetry and Scanning Electron Microscopy. The three ILs dissolved in the copolymer soft phase for ILs content below 30 wt % whereas they formed segregated dispersed domains at higher loadings. The plasticizing effect of the ILs was examined through DSC and thermomechanical analyses. In the range of IL amount from 0 to 30 wt %, no significant differences were observed in the thermomechanical properties as a function of the IL structure. At higher IL content, the films based on 1‐ethyl‐methylimidazolium tetrafluoroborate sustained better properties. All films exhibited a good thermal stability up to 300 °C. The water sorption isotherms were modeled with GAB equation and both the kinetic and thermodynamic parameters of the sorption mechanism were investigated. A non‐monotonic evolution of the GAB parameters and diffusion coefficient as a function of the IL content was evidenced. Moreover, different behaviors were observed as a function of the IL nature and structuration within the copolymer matrix. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 811–824     

Optimizing the electrochemical performance of imidazolium‐based polymeric ionic liquids by varying tethering groups

We report the synthesis and characterization of a series of novel imidazolium cation and bis(trifluoromethane)sulfonimide anion (TFSI^?)‐based ionic liquid (IL) model compounds and their corresponding polymeric ionic liquids (PILs) with various tethering groups. Ethylene oxide repeating units were attached as tethering groups to an imidazolium cation to optimize the glass transition temperatures (T_g) and ionic conductivities of the PILs. The novel PILs exhibit excellent conductivity values of around 8 × 10^?4 S/cm at room temperature. The thermophysical and electrochemical properties of ILs, including thermal transition, ionic conductivity, and rheological behavior, were characterized to investigate the effect of tethering groups. We conclude that the length of poly(ethylene oxide) tethering group has a tremendous effect on both physical property and electrochemical behavior and that charge carrier density is dominant in defining ionic conductivity with free ILs, whereas ion mobility plays a more important role after polymerization. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1339–1350     

Effects of Cationic Structure on Cellulose Dissolution in Ionic Liquids: A Molecular Dynamics Study

In recent years, great progress has been made in the dissolution of cellulose with ionic liquids (ILs). However, the mechanism of cellulose dissolution, especially the role the IL cation played in the dissolution process, has not been clearly understood. Herein, the mixtures of cellulose with a series of imidazolium‐based chloride ionic liquids and 1‐butyl‐3‐methyl pyridinium chloride ([C₄mpy]Cl) were simulated to study the effect that varying the heterocyclic structure and alkyl chain length of the IL cation has on the dissolution of cellulose. It was shown that the dissolution of cellulose in [C₄mpy]Cl is better than that in [C₄mim]Cl. For imidazolium‐based ILs, the shorter the alkyl chain is, the higher the solubility will be. In addition, an all‐atom force field for 1‐allyl‐3‐methyl imidazolium cation ([Amim]⁺) was developed, for the first time, to investigate the effect the electron‐withdrawing group within the alkyl chain of the IL cation has on the dissolution of cellulose. It was found that the interaction energy between [Amim]⁺ and cellulose was greater than that between [C₃mim]⁺ and cellulose, indicating that the presence of electron‐withdrawing group in alkyl chain of the cation enhanced the interaction between the cation and cellulose due to the increase of electronegativity of the cations. These findings are used to assess the cationic effect on the dissolution of cellulose in ILs. They are also expected to be important for rational design of novel ILs for efficient dissolution of cellulose.     

Dissecting the Vaporization Enthalpies of Ionic Liquids by Exclusively Experimental Methods: Coulomb Interaction,Hydrogen Bonding,and Dispersion Forces

The quantification of hydrogen bonding and dispersion energies from vaporization enthalpies is a great challenge. Dissecting interaction energies is particularly difficult for ionic liquids (ILs), for which the composition of the different types of interactions is known neither for the liquid nor for the gas phase. In this study, we demonstrate the existence of ion pairs in the gas phase and dissect the interaction energies exclusively from measured vaporization enthalpies of different alkylated protic ILs (PILs) and aprotic ILs (AILs) and the molecular analogues of their cations. We demonstrate that the evaporated ion pairs are characterized by H‐bond‐enhanced Coulomb interaction. The overall interaction energy for the ILs in the bulk phase is composed of Coulomb interaction (76 kJ mol^?1), hydrogen bonding (38 kJ mol^?1), and minor dispersion interaction (10 kJ mol^?1). Thus, hydrogen bonding prominently contributes to the overall interaction energy of PILs, which is reflected in the properties of this class of liquids.     

Low temperature ionic conductor: ionic liquid incorporated within a metal–organic framework

Ionic liquids (ILs) show promise as safe electrolytes for electrochemical devices. However, the conductivity of ILs decreases markedly at low temperatures because of strong interactions arising between the component ions. Metal–organic frameworks (MOFs) are appropriate microporous host materials that can control the dynamics of ILs via the nanosizing of ILs and tunable interactions of MOFs with the guest ILs. Here, for the first time, we report on the ionic conductivity of an IL incorporated within a MOF. The system studied consisted of EMI-TFSA (1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)amide) and ZIF-8 (Zn(MeIM)₂, H(MeIM) = 2-methylimidazole) as the IL and the MOF, respectively. While the ionic conductivity of bulk EMI-TFSA showed a sharp decrease arising from freezing, the EMI-TFSA@ZIF-8 showed no marked decrease because there was no phase transition. The ionic conductivity of EMI-TFSA@ZIF-8 was higher than that of bulk EMI-TFSA below 250 K. This result points towards a novel method by which to design electrolytes for electrochemical devices such as batteries that can operate at low temperatures.     

Inclusion complexes of cyclodextrins with hydrophobic ionic liquids

Two imidazolium-based hexafluorophosphate ionic liquids (ILs), 1-butyl-3-methylimidazolium hexafluorophosphate and 1-dodecyl-3-methylimidazolium hexafluorophosphate, were used to form inclusion complexes (ICs) with α- and β-cyclodextrins (CDs). Formation of the ICs of each CD with each IL was confirmed by the appearance of a characteristic peak in the UV region. Characterisation of the ICs by NMR and FT-IR spectroscopy provided information about the interactions between the host and guest molecules and the structure of the ICs. Temperature-dependent particle size analysis by dynamic light scattering suggested that the size of the host and the guest governs their stability.     

Synthesis and Thermophysical Properties of Ether‐Functionalized Sulfonium Ionic Liquids as Potential Electrolytes for Electrochemical Applications

During this work, a novel series of hydrophobic room temperature ionic liquids (ILs) based on five ether functionalized sulfonium cations bearing the bis{(trifluoromethyl)sulfonyl}imide, [NTf₂]^? anion were synthesized and characterized. Their physicochemical properties, such as density, viscosity and ionic conductivity, electrochemical window, along with thermal properties including phase transition behavior and decomposition temperature, have been measured. All of these ILs showed large liquid range temperature, low viscosity, and good conductivity. Additionally, by combining DFT calculations along with electrochemical characterization it appears that these novel ILs show good electrochemical stability windows, suitable for the potential application as electrolyte materials in electrochemical energy storage devices.     

Ionic liquids in enhancing the sensitivity of capillary electrophoresis: Off‐line and on‐line sample preconcentration techniques

The popularity of ionic liquids (ILs) has grown during the last decade in enhancing the sensitivity of CE through different off‐line or on‐line sample preconcentration techniques. Water‐insoluble ILs were commonly used in IL‐based liquid phase microextraction, in all its variants, as off‐line sample preconcentration techniques combined with CE. Water‐soluble ILs were rarely used in IL‐based aqueous two phase system (IL‐ATPS) as an off‐line sample preconcentration approach combined with CE in spite of IL‐ATPS predicted features such as more compatibility with CE sample injection due to its relatively low viscosity and more compatibility with CE running buffers avoid, in some cases, anion exchange precipitation. Therefore, the attentions for the key parameters affecting the performance of IL‐ATPSs were generally presented and discussed. On‐line CE preconcentration techniques containing IL‐based surfactants at nonmicellar or micellar concentrations have become another interesting area to improve CE sensitivity and it is likely to remain a focus of the field in the endeavor because of their numerous to create rapid, simple and sensitive systems. In this article, significant contributions of ILs in enhancing the sensitivity of CE are described, and a specific overview of the relevant examples of their applications is also given.     

Polyoxometalate Ionic Liquids as Self‐Repairing Acid‐Resistant Corrosion Protection

Corrosion is a global problem for any metallic structure or material. Herein we show how metals can easily be protected against acid corrosion using hydrophobic polyoxometalate‐based ionic liquids (POM‐ILs). Copper metal disks were coated with room‐temperature POM‐ILs composed of transition‐metal functionalized Keggin anions [SiW₁₁O₃₉TM(H₂O)]^n? (TM=Cu^II, Fe^III) and quaternary alkylammonium cations (C_nH_{2 n+1})₄N⁺ (n=7–8). The corrosion resistance against acetic acid vapors and simulated “acid rain” was significantly improved compared with commercial ionic liquids or solid polyoxometalate coatings. Mechanical damage to the POM‐IL coating is self‐repaired in less than one minute with full retention of the acid protection properties. The coating can easily be removed and recovered by rinsing with organic solvents.     

Reversible Photoresponsive Molecular Alignment of Liquid Crystals at Fluid Interfaces with Persistent Stability

This work demonstrates a noninvasive approach to control alignment of liquid crystals persistently and reversibly at fluid interfaces by using a photoresponsive azobenzene‐based surfactant dissolved in an ionic liquid (IL), ethylammonium nitrate (EAN). As the first report on the orientational behavior of LCs at the IL/LC interface, our study also expands current understanding of alignment control of LCs at the aqueous/LC interface by adding electrolytes into aqueous solutions. The threshold concentration for switching the optical responses of LCs can be changed just by simply manipulating the ratio of EAN to H₂O. This work will inspire fundamental studies and novel applications of using the LC‐based imaging technique to investigate various chemical and biological events in ILs.