Formation of Silver Nanoparticles by Electron Transfer in Peptides and c-Cytochromes

The reduction of Ag⁺ ions to Ag⁰ atoms is a highly endergonic reaction step, only the aggregation to Ag_n clusters leads to an exergonic process. These elementary chemical reactions play a decisive role if Ag nanoparticles (AgNPs) are generated by electron transfer (ET) reactions to Ag⁺ ions. We studied the formation of AgNPs in peptides by photoinduced ET, and in c-cytochromes by ET from their Fe²⁺/hemes. Our earlier photoinduced experiments in peptides had demonstrated that histidine prevents AgNP formation. We have now observed that AgNPs can be easily synthesized with less-efficient Ag⁺-binding amino acids, and the rate increases in the order lysine<asparagine<aspartate<serine. The ability of Fe²⁺/hemes of c-cytochromes to reduce Ag⁺ to AgNPs was studied in an enzymatic experiment and with living bacteria Geobacter sulfurreducens (Gs).     

In-Situ Formation of Silver Nanoparticles in PEI

Nanocomposites consisting of spherical particles of Ag were prepared using a single step in situ method whereby Ag is introduced into the dissolved polymer via dissolution as the organometallic complex Ag TFA in the same solvent as the polymer. The kinetic rate of formation of the particles is determined using WAXS and SAXS measurements. Nanoparticle formation is found to depend on reducing the solvent/polymer ratio, which leads to de-solvating the metal complex. This destabilizes the metal precursor complex, causing it to degrade and the metal particles to phase separate by a thermodynamic driving force. The size of the nanoparticles varies with the cure temperature and the conditions affecting molecular mobility.     

纳米银形状控制合成与聚合物纳米银复合材料

纳米银(Ag NPs)由于其独特的物理、化学和生物学特性备受研究人员的关注.纳米银应用性能除了受到粒子尺寸、分布、纯度等因素影响,还与纳米银的形状密切相关.纳米银的形状对纳米银的抗菌性能、光学性能以及聚合物纳米银复合材料的综合性能都会产生重要影响.纳米银的形状控制合成可以进一步发挥聚合物纳米银复合材料的性能潜力.因此,不断发展纳米银新的合成方法,研究纳米银形状控制的机理就显得尤为重要.本文综述了纳米银合成方法和不同形状纳米银的最新研究进展,合成方法重点介绍了辐射法、激光烧蚀法、电化学法、光化学法和生物合成法,评述了这些方法的优缺点;同时从模板法、动力学、热力学以及氧化刻蚀4个方面介绍了纳米银形状控制的机理.介绍了聚合物纳米银复合材料的研究进展.     

Photoinduced Electron Transfer between CdS and CdTe Nanoparticles in Colloidal Solutions

The photochemical behavior of solutions containing a mixture of CdS and CdTe nanoparticles under pulsed irradiation conditions was investigated. It was shown that electron transfer from the CdS particles to the CdTe nanoparticles occurs during the photoexcitation of such systems. The effectiveness of the process is increased with increase in the size of the CdTe nanoparticles. Such behavior is due to decrease in the potential of the CdTe conduction band with increase in the size of the nanoparticles as a result of the appearance of quantum-dimensional effects.     

On the Hopping Efficiency of Nanoparticles in the Electron Transfer across Self‐Assembled Monolayers

Redox reactions of solvated molecular species at gold‐electrode surfaces modified by electrochemically inactive self‐assembled molecular monolayers (SAMs) are found to be activated by introducing Au nanoparticles (NPs) covalently bound to the SAM to form a reactive Au–alkanedithiol–NP–molecule hybrid entity. The NP appears to relay long‐range electron transfer (ET) so that the rate of the redox reaction may be as efficient as directly on a bare Au electrode, even though the ET distance is increased by several nanometers. In this study, we have employed a fast redox reaction of surface‐confined 6‐(ferrocenyl) hexanethiol molecules and NPs of Au, Pt and Pd to address the dependence of the rate of ET through the hybrid on the particular NP metal. Cyclic voltammograms show an increasing difference in the peak‐to‐peak separation for NPs in the order Au<Pt<Pd, especially when the length of the alkanedithiol increases from octanedithiol to decanedithiol. The corresponding apparent rate constants, k_app, for decanedithiol are 1170, 360 and 14 s^?1 for NPs of Au, Pt and Pd, respectively, indicating that the efficiency of NP mediation of the ET clearly depends on the nature of the NP. Based on a preliminary analysis rooted in interfacial electrochemical ET theory, combined with a simplified two‐step view of the NP coupling to the electrode and the molecule, this observation is referred to the density of electronic states of the NPs, reflected in a broadening of the molecular electron/NP bridge group levels and energy‐gap differences between the Fermi levels of the different metals.     

Kinetics and Mechanism of Mineral Respiration: How Iron Hemes Synchronize Electron Transfer Rates

Anaerobic microorganisms of the Geobacter genus are effective electron sources for the synthesis of nanoparticles, for bioremediation of polluted water, and for the production of electricity in fuel cells. In multistep reactions, electrons are transferred via iron/heme cofactors of c‐type cytochromes from the inner cell membrane to extracellular metal ions, which are bound to outer membrane cytochromes. We measured electron production and electron flux rates to 5×10⁵ e s^?1 per G. sulfurreducens. Remarkably, these rates are independent of the oxidants, and follow zero order kinetics. It turned out that the microorganisms regulate electron flux rates by increasing their Fe²⁺/Fe³⁺ ratios in the multiheme cytochromes whenever the activity of the extracellular metal oxidants is diminished. By this mechanism the respiration remains constant even when oxidizing conditions are changing. This homeostasis is a vital condition for living systems, and makes G. sulfurreducens a versatile electron source.     

含酪氨酸和色氨酸的肽内电子转移的溶剂重组能计算

基于连续介质模型，本文考察了多肽体系Trp-(Pro)n-Tyr (n=1,2) 从酪氨酸到色氨酸的分子内电子转移，并根据电荷定域的反应物和产物构型和线性反应坐标近似构造了电子转移的双势阱，通过势能曲线的交叉点确定了电子转移过渡态。本文重点讨论了电子转移溶剂重组能。根据作者的非平衡溶剂化理论和可极化连续介质模型编写了溶剂重组能计算程序并用于本文体系的计算。计算得到Trp-Pro-Tyr 和Trp-(Pro)2-Tyr.体系的溶剂重组能分别为20.89 kcal/mol和25.30 kcal/mol.     

Silver Nanoparticles Stabilized by Thermoresponsive Microgel Particles: Synthesis and Evidence of an Electron Donor‐Acceptor Effect

Well‐dispersed silver nanoparticles were successfully fabricated within poly[(N‐isopropylacrylamide)‐co‐(acrylic acid)] [P(NIPAM‐co‐AA)] microgel particles which were synthesized with different cross‐linking densities. Their structures were studied by field‐emission scanning electron microscopy, transmission electron microscopy, UV‐vis spectroscopy, X‐ray diffraction and FT‐IR spectroscopy. The interactions between the microgel particles and the incorporated silver nanoparticles were investigated by X‐ray photoelectron spectroscopy. The results revealed that there was charge transfer from the carbonyl groups of the microgel particles to the silver nanoparticles. Moreover, as the diameter of the AgNPs decreases, the charge‐transfer efficiency increases accordingly. The P(NIPAM‐co‐AA)/AgNPs hybrid microgel particles were thermoresponsive and their behavior completely reversible with several heating/cooling cycles.

     

On the Roles of Electron Transfer in Catalysis by Nanoclusters and Nanoparticles

Electron transfer plays a major role in chemical reactions and processes, and this is particularly true of catalysis by nanomaterials. The advent of metal nanoparticle (NP) catalysts, recently including atomically precise nanoclusters (NCs) as parts of nanocatalyst devices has brought increased control of the relationship between NP and NC structures and their catalytic functions. Consequently, the molecular definition of these new nanocatalysts has allowed a better understanding and management of various kinds of electron transfer involved in the catalytic processes. This Minireview brings a chemist‘s view of several major aspects of electron-transfer functions concerning NPs and NCs in catalytic processes. Particular focus concerns the role of NPs and NCs as electron reservoirs and light-induced antenna in catalytic processes from H₂ generation to more complex reactions and sustainable energy production.     

基于银纳米粒子的生成测定痕量甲醛

在碱性溶液中甲醛能还原Ag~+得到黄色银纳米粒子,使体系的共振光散射(RLS)强度增强,从而建立起测量环境中痕量甲醛的RLS新方法. 结果表明,新建方法测定甲醛的浓度线性范围为1.0×10~(-6)～2.0×10~(-5) mol/L,检出限为1.0×10~(-7) mol/L,样品加标测定的回收率为96.26%～103.32%. 并且不同浓度的甲醛还原Ag~+得到黄色银纳米粒子的颜色明显不同,基于此建立了一种可视化半定量测定痕量甲醛的新方法,此方法简便快速、灵敏度高. 用于环境水样、室内空气中甲醛的测定,结果满意.     

In-Situ Formation of AgCl Nanocrystallites in Films Prepared by the Sol-Gel and Silver Nanoparticles in Silica Glass Films

We are reporting on a novel preparation of silver chloride in sol-gel silica films as a precursor for nanoparticles of silver. The precipitation of silver chloride particles in-situ was achieved by the reaction of silver nitrate with trichloroacetic acid. The reaction leads to a slow release of chloride leading to a controlled precipitation of AgCl. The existence of an isotropic crystalline AgCl phase in the glass films was demonstrated by X-rays Diffraction Analysis (XRD) and Scanning Electron Microscope and Energy Dispersive Analysis of X-rays (SEM-EDAX). The resulting films are of good optical quality and exhibit a strong coloration upon irradiation with sunlight or heating to 600°C, due to the reduction of AgCl to silver nanoparticles. The absorption spectra of the films before and after irradiation are shown.     

Electron Transfer around a Molecular Corner

The distance dependence of electron transfer (ET) is commonly investigated in linear rigid rod‐like compounds, but studies of molecular wires with integrated corners imposing 90° angles are very rare. By using spirobifluorene as a key bridging element and by substituting it at different positions, two isomeric series of donor‐bridge‐acceptor compounds with either nearly linear or angled geometries were obtained. Photoinduced ET in both series is dominated by rapid through‐bond hole hopping across oligofluorene bridges over distances of up to 70 Å. Despite considerable conformational flexibility, direct through‐space and through‐solvent ET is negligible even in the angled series. The independence of the ET rate constant on the total number of fluorene units in the angled series is attributed to a rate‐limiting tunneling step through the spirobifluorene corner. This finding is relevant for multidimensional ET systems and grids in which individual molecular wires are interlinked at 90° angles.     

In Situ Formation of a Uniform Distribution of Silver Nanoparticles in PVDF: Kinetics of Formation and Resulting Properties

Hybrid organic/silver nanoparticle thermoplastic films have been prepared using a single step process where the silver nanoparticles were formed during a cure cycle applied to the film. Figure 1 is a TEM demonstrating the ability of our technique to produce silver nanoparticles in the semi-crystalline polymer Poly(vinylidene fluoride) (PVDF). The current laboratory focus is on characterizing kinetics and particularly the diameter growth and inter-particle distance as a function of time and temperature using the techniques of small-angle X-ray scattering (SAXS), differential scanning calorimetry (DSC), and X-ray diffraction (XRD). Using the Beaucage model, the SAXS data demonstrates that the particle size reaches equilibrium after approximately 70 minutes of curing at 240 °C. This result is also observed in the XRD results where the half width of the diffraction peaks becomes smaller quickly during the initial hour. In a parallel experiment using DSC, the exothermic heat flow increases rapidly during the first hour but does not reach completion until almost 150 minutes.     

纳米金三明治结构调制细胞色素c电子传递特性的分子机理研究

以细胞色素c(Cyt c)为模型蛋白,采用表面增强红外吸收光谱监测了三明治结构所吸附的纳米金对氧化还原诱导的Cyt c表面增强红外差谱的改变.研究表明,在单层Cyt c分子表面组装纳米金,使得血红素的红外差谱特征峰明显增强,这归因于纳米金和血红素之间的电子传递.纳米金与Cyt c氧化还原活性中心血红素的相互作用加速了蛋白质的电子传递.这为实现并优化表面吸附蛋白质的直接电化学提供了一种新技术.     

Electron Transfer in Peptides with Cysteine and Methionine as Relay Amino Acids

Caught on the hop : In multistep electron transfer (ET) reactions through peptides, aliphatic amino acids can also act as relay stations. With cysteine, the reaction occurs as a proton‐coupled electron transfer (PCET) with water used as a mediator for the proton transfer (see picture).

     

Structure and Properties of Electrochemically Synthesized Silver Nanoparticles in Aqueous Solution by High-Resolution Techniques

The aim of this work was to deeply investigate the structure and properties of electrochemically synthesized silver nanoparticles (AgNPs) through high-resolution techniques such as transmission electron microscopy (TEM), scanning electron microscopy (SEM), Zeta Potential measurements, and matrix-assisted laser desorption/ionization time of flight mass spectrometry (MALDI-TOF-MS). Strong brightness, tendency to generate nanoclusters containing an odd number of atoms, and absence of the free silver ions in solution were observed. The research also highlighted that the chemical and physical properties of the AgNPs seemed to be related to their peculiar oxidative state as suggested by X-ray photoelectron spectroscopy (XPS) and X-ray powder diffraction (XRPD) analyses. Finally, the MTT assay tested the low cytotoxicity of the investigated AgNPs.     

Control of the Colloidal Stability of Polymer-Grafted-Silica Nanoparticles Obtained by Atom Transfer Radical Polymerization

Polymer chains are grafted from silica nanobeads. The method consists in grafting first the initiator molecules on the silica surface. Then, the polymerization of styrene or n-butyl methacrylate using Atom Transfer Radical Polymerization, is conducted. The nanoparticles are kept in solution during the whole process to avoid irreversible aggregation. The state of dispersion of the grafted silica nanoparticles is followed by Small Angle Neutron Scattering, as well as the quantity and the spatial organisation of the polymer. This is done during the functionalisation and the polymerization, but also after purification where free polymer chains are eliminated. This permits to reach a quantitative level of SANS analysis from these purified particles, which is compared to chemical data given by Size Exclusion Chromatography and Thermogravimetric analysis.     

Lewis Acid Coupled Electron Transfer of Metal–Oxygen Intermediates

Redox‐inactive metal ions and Brønsted acids that function as Lewis acids play pivotal roles in modulating the redox reactivity of metal–oxygen intermediates, such as metal–oxo and metal–peroxo complexes. The mechanisms of the oxidative C?H bond cleavage of toluene derivatives, sulfoxidation of thioanisole derivatives, and epoxidation of styrene derivatives by mononuclear nonheme iron(IV)–oxo complexes in the presence of triflic acid (HOTf) and Sc(OTf)₃ have been unified as rate‐determining electron transfer coupled with binding of Lewis acids (HOTf and Sc(OTf)₃) by iron(III)–oxo complexes. All logarithms of the observed second‐order rate constants of Lewis acid‐promoted oxidative C?H bond cleavage, sulfoxidation, and epoxidation reactions of iron(IV)–oxo complexes exhibit remarkably unified correlations with the driving forces of proton‐coupled electron transfer (PCET) and metal ion‐coupled electron transfer (MCET) in light of the Marcus theory of electron transfer when the differences in the formation constants of precursor complexes were taken into account. The binding of HOTf and Sc(OTf)₃ to the metal–oxo moiety has been confirmed for Mn^IV–oxo complexes. The enhancement of the electron‐transfer reactivity of metal–oxo complexes by binding of Lewis acids increases with increasing the Lewis acidity of redox‐inactive metal ions. Metal ions can also bind to mononuclear nonheme iron(III)–peroxo complexes, resulting in acceleration of the electron‐transfer reduction but deceleration of the electron‐transfer oxidation. Such a control on the reactivity of metal–oxygen intermediates by binding of Lewis acids provides valuable insight into the role of Ca²⁺ in the oxidation of water to dioxygen by the oxygen‐evolving complex in photosystem II.