Black Phosphorus Quantum Dots

As a unique two‐dimensional nanomaterial, layered black phosphorus (BP) nanosheets have shown promising applications in electronics. Although mechanical exfoliation was successfully used to prepare BP nanosheets, it is still a challenge to produce novel BP nanostructures in high yield. A facile top‐down approach for preparation of black phosphorus quantum dots (BPQDs) in solution is presented. The obtained BPQDs have a lateral size of 4.9±1.6 nm and thickness of 1.9±0.9 nm (ca. 4±2 layers). As a proof‐of‐concept application, by using BPQDs mixed with polyvinylpyrrolidone as the active layer, a flexible memory device was successfully fabricated that exhibits a nonvolatile rewritable memory effect with a high ON/OFF current ratio and good stability.     

Ultrafast Preparation of Black Phosphorus Quantum Dots for Efficient Humidity Sensing

Black phosphorus quantum dots (BPQDs) have been prepared by a high turbulent shear rate generated from a household kitchen blender. A layer‐by‐layer disintegration mechanism of bulk BP crystals is suggested. As‐synthesized BPQDs have shown excellent humidity sensing and photothermal converting properties. Importantly, this work not only explores potential applications for the BPQDs but also provides a successful paradigm for preparing the QDs of other layered materials.     

Paper test strip for silver ions detection in drinking water samples based on combined fluorometric and colorimetric methods

In this study, a portable silver ion (Ag⁺) sensor was fabricated based on a dual signal output system using black phosphorus quantum dots (BPQDs) as probes. It is the first work for Ag⁺ detection using paper test strip based on BPQDs. The color change of BPQDs paper sensor for the determination of Ag⁺ was easily identified by naked eye. BPQDs were synthesized from bulk black phosphorus (BP) by mechanical exfoliation combined with a solvothermal method. BPQDs exhibited blue fluorescence with a quantum yield of 8.82 %. The fluorescence of BPQDs can be quenched by Ag⁺, and the absorbance of BPQDs is increased with increasing Ag⁺ concentration. The mechanism of the interaction between BPQDs and Ag⁺ involving fluorescence quenching and bonding was investigated by experimental and computational methods. The detection limit of Ag⁺ was 1.56 μg/mL and 0.19 μg/mL using fluorometry and colorimetry methods, respectively. A portable visual sensor based on paper test strip was constructed for Ag⁺ detection using the colorimetric approach. The strategy was employed to determine Ag⁺ successfully in drinking water samples. Therefore, the proposed portable Ag⁺ sensor can be potentially utilized for the lab-free analysis of drinking water and even dietary samples.     

2D Monoelemental Germanene Quantum Dots: Synthesis as Robust Photothermal Agents for Photonic Cancer Nanomedicine

As a new family member of the emerging two‐dimensional (2D) monoelemental materials (Xenes), germanene has shown promising advantages over the prototypical 2D Xenes, such as black phosphorus (BP) and graphene. However, efficient manufacture of novel germanene nanostructures is still a challenge. Herein, a simple top‐down approach for the liquid‐exfoliation of ultra‐small germanene quantum dots (GeQDs) is presented. The prepared GeQDs possess an average lateral size of about 4.5 nm and thickness of about 2.2 nm. The functionalized GeQDs were demonstrated to be robust photothermal agents (PTAs) with outstanding photothermal conversion efficacy (higher than those of graphene and BPQDs), superior stability, and excellent biocompatibility. As a proof‐of‐principle, 2D GeQDs‐based PTAs were used in fluorescence/photoacoustic/photothermal‐imaging‐guided hyperpyrexia ablation of tumors. This work could expand the application of 2D germanene to the field of photonic cancer nanomedicine.     

Synthesis of Black Phosphorus Quantum Dots with High Quantum Yield by Pulsed Laser Ablation for Cell Bioimaging

Black phosphorus quantum dots (BPQDs), with an average diameter of about 6 nm and a height of about 1.1 nm, are successfully synthesized by means of a pulsed laser ablation (PLA) method in isopropyl ether (IPE) solvent. The photoluminescence PL quantum yield of the as‐prepared sample is as high as 20.7 %, which is 3 times that of BPQDs prepared by means of probe ultrasonic exfoliation (approximately 7.2 %). The stable and blue–violet PL emission of the BPQDs is observed. It can be elucidated that electrons transit from the LUMO energy level to the HOMO energy level, as well as energy levels below the HOMO (H1 and H2). In addition, BPQDs are also utilized in bioimaging in HeLa cells, showing an intense and stable PL signal and excellent biocompatibility. Hence, this work indicates that the obtained BPQDs with high quantum yield and stable PL emission have great potential for biomedical applications, including biolabeling, bioimaging, and drug delivery.     

Direct and single-step sensing of primary ovarian cancers related glycosidases

High sensitive, accurate detection for tumor-associated overexpressed enzyme activity is highly significant for further understanding enzyme function, discovering potential drugs, and early diagnosis and prevention of diseases. In this work, we developed a facile, direct and single-step detection platform for primary ovarian cancers related glycosidase activity based on the inner filter effect(IFE) between glycosidase catalytic product and black phosphorus quantum dots(BPQDs). Highly fluorescent BPQDs were successfully synthesized from bulk black phosphorus by a simple liquid exfoliation method. Under the catalysis of β-galactosidase, p-nitrophenyl-β-D-galactopyranoside(PNPG) was transformed into pnitrophenol(PNP) and β-D-galactopyranoside. Meanwhile, the absorption of catalytic product PNP greatly overlapped with the excitation and emission spectra of fluorescent BPQDs, leading to the fluorescence quenching of BPQDs with a high quenching efficiency. The proposed sensing strategy provided a low detection limit of 0.76 U/L, which was 1 — 2 orders of magnitude lower than most unmodified sensing platforms. D-Galactal was selected as the inhibitor for β-galactosidase to further assess the feasibility of screening potential inhibitors. The fluorescence recovery of BPQDs suggests that the unmodified sensing platform is feasible to discover potential drugs of β-galactosidase. Our work paves a general way in the detection of glycosidase activity with fluorescent BPQDs, which can be promising for glycosidase-related disease diagnosis and pathophysiology elucidation.     

Electrochemical Exfoliation of Layered Black Phosphorus into Phosphorene

Among 2D materials that recently have attracted enormous interest, black phosphorus (BP) is gaining a rising popularity due to its tunable band‐gap structure, which is strongly correlated to the thickness and can enable its use in optoelectronic and electronic applications. It is therefore important to provide a facile and scalable methodology to prepare single or few‐layer BP nanosheets. We propose herein a simple and fast top‐down method to exfoliate a BP crystal into nanosheets of reduced thickness by using electrochemistry. The application of an anodic potential to the crystal in an acidic aqueous solution allows control over the exfoliation efficiency and quality of the nanosheets produced. X‐ray photoelectron spectroscopy (XPS), Raman spectroscopy, and scanning transmission electron microscopy (STEM) have been applied to fully characterize the exfoliated material, which presented significantly reduced layer thickness compared to the starting bulk material.     

Photoinduced Multiple Effects to Enhance Uranium Extraction from Natural Seawater by Black Phosphorus Nanosheets

Based on the photoinduced photothermal, photoelectric, and photocatalytic effects of black phosphorus (BP) nanosheets, a BP‐PAO fiber with enhanced uranium extraction capacity and high antibiofouling activity is fabricated by compositing BP nanosheets into polyacrylamidoxime (PAO). The photothermal effect increases the coordination interaction between UO₂²⁺ and the functional amidoxime group, and the photoelectric effect produces the surface positive electric field that exhibits electrostatic attraction to the negative [UO₂(CO₃)₃]^4?, which all increase the capacity for uranium adsorption. The photocatalytic effect endows the adsorbent with high antibiofouling activity by producing biotoxic reactive oxygen species. Owing to these three photoinduced effects, the photoinduced BP‐PAO fiber shows a high uranium adsorption capacity of 11.76 mg g^?1, which is 1.50 times of the PAO fiber, in bacteria‐containing natural seawater.     

Covalent Functionalization of Black Phosphorus with Conjugated Polymer for Information Storage

Major disadvantages of black phosphorus (BP) are its poor air‐stability and poor solubility in common organic solvents. The best way to solve this problem is to incorporate BP into a polymer backbone or a polymer matrix to form novel functional materials that can provide both challenges and opportunities for new innovation in optoelectronic and photonic applications. As a proof‐of concept application, we synthesized in situ the first highly soluble conjugated polymer‐covalently functionalized BP derivative (PDDF‐g‐BP) which was used to fabricate a resistive random access memory (RRAM) device with a configuration of Au/PDDF‐g‐BP/ITO. In contrast to PDDF without memory effect, PDDF‐g‐BP‐based device exhibits a nonvolatile rewritable memory performance, with a turn‐on and turn‐off voltages of +1.95 V and ?2.34 V, and an ON/OFF current ratio of 10⁴. The current through the device in both the ON and OFF states is still kept unchanged even at 200th switching cycle. The PDDF/BP blends show a very unstable memory performance with a very small ON/OFF current ratio.     

Black Phosphorus Quantum Dots Used for Boosting Light Harvesting in Organic Photovoltaics

Although organic photovoltaic devices (OPVs) have been investigated for more than two decades, the power conversion efficiencies of OPVs are much lower than those of inorganic or perovskite solar cells. One effective approach to improve the efficiency of OPVs is to introduce additives to enhance light harvesting as well as charge transportation in the devices. Here, black phosphorus quantum dots (BPQDs) are introduced in OPVs as an additive. By adding 0.055 wt % BPQDs relative to the polymer donors in the OPVs, the device efficiencies can be dramatically improved for more than 10 %. The weight percentage is much lower than that of any other additive used in OPVs before, which is mainly due to the two‐dimentional structure as well as the strong broadband light absorption and scattering of the BPQDs. This work paves a way for using two‐dimentional quantum dots in OPVs as a cost‐effective approach to enhance device efficiencies.     

A Delamination Strategy for Thinly Layered Defect‐Free High‐Mobility Black Phosphorus Flakes

Extraordinary electronic and photonic features render black phosphorus (BP) an important material for the development of novel electronics and optoelectronics. Despite recent progress in the preparation of thinly layered BP flakes, scalable synthesis of large‐size, pristine BP flakes remains a major challenge. An electrochemical delamination strategy is demonstrated that involves intercalation of diverse cations in non‐aqueous electrolytes, thereby peeling off bulk BP crystals into defect‐free flakes comprising only a few layers. The interplay between tetra‐n‐butylammonium cations and bisulfate anions promotes a high exfoliation yield up to 78 % and large BP flakes up to 20.6 μm. Bottom‐gate and bottom‐contact field‐effect transistors, comprising single BP flakes only a few layers thick, exhibit a high hole mobility of 252±18 cm² V^?1 s^?1 and a remarkable on/off ratio of (1.2±0.15)×10⁵ at 143 K under vacuum. This efficient and scalable delamination method holds great promise for development of BP‐based composites and optoelectronic devices.     

In‐Plane Black Phosphorus/Dicobalt Phosphide Heterostructure for Efficient Electrocatalysis

Heterostructures composed of two‐dimensional black phosphorus (2D BP) with unique physical/chemical properties are of great interest. Herein, we report a simple solvothermal method to synthesize in‐plane BP/Co₂P heterostructures for electrocatalysis. By using the reactive edge defects of the BP nanosheets as the initial sites, Co₂P nanocrystals are selectively grown on the BP edges to form the in‐plane BP/Co₂P heterostructures. Owing to disposition on the original defects of BP, Co₂P improves the conductivity and offers more active electrocatalytic sites, so that the BP/Co₂P nanosheets exhibit better and more stable electrocatalytic activities in the hydrogen evolution and oxygen evolution reactions. Our work not only extends the application of BP to electrochemistry, but also provides a new idea to improve the performance of BP by utilization of defects. Furthermore, this strategy can be extended to produce other BP heterostructures to expand the corresponding applications.     

Azide Passivation of Black Phosphorus Nanosheets: Covalent Functionalization Affords Ambient Stability Enhancement

Two‐dimensional (2D) black phosphorus (BP) has a unique band structure, but it suffers from low ambient stability owing to its high reactivity to oxygen. Covalent functionalization has been demonstrated to passivate the reactive BP effectively, however the reported covalent functionalization methods are quite limited to aryl diazonium and nucleophilic additions affording P?C and P?O?C single bonds, for which the retaining of one unpaired electron in the Group 15 phosphorus atom hampers the passivation effect. Now, covalent azide functionalization of BP nanosheets (BPNSs) is reported, leading to significant enhancement of the ambient stability of BP as confirmed by UV/Vis spectroscopic studies. The most stable configuration of the azide functionalized BPNSs (f‐BPNSs) is predicted by theoretical calculations, featuring the grafting of benzoic acid moiety onto BPNSs via the unprecedented P=N double bonds formed through in situ nitrene as a reactive intermediate.     

Mediated Drug Release from Nanovehicles by Black Phosphorus Quantum Dots for Efficient Therapy of Chronic Obstructive Pulmonary Disease

Chronic obstructive pulmonary disease (COPD) is an intractable disease involving a sticky mucus layer and nanoagents with mucus-penetrating capability offer a new way to deliver drugs. However, drug release from nanovehicles requires optimization to enhance the therapeutic effects of COPD therapy. Herein, black phosphorus quantum dots (BPQDs) are combined with PEGylated chitosan nanospheres containing the antibiotic amikacin (termed PEG@CS/BPQDs-AM NPs). As a drug-delivery system, the hydrophilicity of PEG and positive charge of CS facilitate the penetration of nanovehicles through the mucus layer. The nanovehicles then adhere to the mucous membrane. Furthermore, the BPQDs degrade rapidly into nontoxic PO₄³⁻ and acidic H⁺, thereby promoting the dissociation of PEGylated CS nanospheres, accelerating the release of AM, decreasing the vitality of biofilms for ease of eradication. Our results reveal that drug delivery mediated by BPQDs is a feasible and desirable strategy for precision medicine and promising for the clinical therapy of COPD.     

Cold-catalytic antitumor immunity with pyroelectric black phosphorus nanosheets

Catalytic nanomedicine with the innate features of catalysts brings incomparable properties to biomedicine over traditional drugs. The temperature-dependent activity of catalysts provides catalytic nanomedicines with a facile strategy to control their therapeutic performance. Tuning catalytic nanomedicine by cold treatment (4–37 °C) is safe and desired for practical applications, but there is a lack of cold-catalytic platforms. Herein, with black phosphorus (BP) as a model pyroelectric nanocatalyst, we explored the potential of cold-catalysts for antitumor therapy. BP nanosheets with pyro-catalytic activity catalyze the generation of oxidative stress to activate antitumor immunity under cold treatment. Due to the cold-catalytic immunomodulation, immune memory was successfully achieved to prevent tumor metastasis and recurrence. Considering the safety and conductive depth (>10 mm) of cold in the body, pyroelectric nanocatalysts open up exciting opportunities for the development of cold-catalytic nanomedicine.

Cold-catalytic nanomedicine and the concept of cold-catalytic immunotherapy are explored with black phosphorus as a model cold catalyst.     

Au/La2Ti2O7 Nanostructures Sensitized with Black Phosphorus for Plasmon‐Enhanced Photocatalytic Hydrogen Production in Visible and Near‐Infrared Light

Efficient utilization of solar energy is a high‐priority target and the search for suitable materials as photocatalysts that not only can harvest the broad wavelength of solar light, from UV to near‐infrared (NIR) region, but also can achieve high and efficient solar‐to‐hydrogen conversion is one of the most challenging missions. Herein, using Au/La₂Ti₂O₇ (BP‐Au/LTO) sensitized with black phosphorus (BP), a broadband solar response photocatalyst was designed and used as efficient photocatalyst for H₂ production. The optimum H₂ production rates of BP‐Au/LTO were about 0.74 and 0.30 mmol g⁻¹ h⁻¹ at wavelengths longer than 420 nm and 780 nm, respectively. The broad absorption of BP and plasmonic Au contribute to the enhanced photocatalytic activity in the visible and NIR light regions. Time‐resolved diffuse reflectance spectroscopy revealed efficient interfacial electron transfer from excited BP and Au to LTO which is in accordance with the observed high photoactivities.     

Ammonia Synthesis Under Ambient Conditions: Selective Electroreduction of Dinitrogen to Ammonia on Black Phosphorus Nanosheets

Constructing efficient catalysts for the N₂ reduction reaction (NRR) is a major challenge for artificial nitrogen fixation under ambient conditions. Herein, inspired by the principle of “like dissolves like”, it is demonstrated that a member of the nitrogen family, well‐exfoliated few‐layer black phosphorus nanosheets (FL‐BP NSs), can be used as an efficient nonmetallic catalyst for electrochemical nitrogen reduction. The catalyst can achieve a high ammonia yield of 31.37 μg h^?1 mg^?1_cat. under ambient conditions. Density functional theory calculations reveal that the active orbital and electrons of zigzag and diff‐zigzag type edges of FL‐BP NSs enable selective electrocatalysis of N₂ to NH₃ via an alternating hydrogenation pathway. This work proves the feasibility of using a nonmetallic simple substance as a nitrogen‐fixing catalyst and thus opening a new avenue towards the development of more efficient metal‐free catalysts.     

Preparation of FePd‐RGO Bimetallic Composites with High Catalytic Activity for Formic Acid Electro‐Oxidation

FePd‐RGO composites through the growth of uniformly dispersed iron‐palladium bimetallic nanoparticles (NPs) on reduced graphene oxide (RGO) nanosheets were prepared by a two‐step method. The firstly formed Fe is used as the seed for the subsequent Pd growth. The formation of Fe NPs on RGO in the first step is performed by an in‐situ reduction reaction with the reducer ethylene glycol under oil bath at 180°C. NPs in the as‐prepared FePd‐RGO have an average particle size of 6.5 nm, and Pd is added to one side of Fe which leads to the formation of Fe‐Pd bimetallic interfaces. As compared with the commercial Pd black at the same loading, the composites have higher electro‐catalytic activity, better electrochemical stability and higher resistance to CO poisoning for formic acid electro‐oxidation.     

Turn-on fluorometric immunosensor for diethylstilbestrol based on the use of air-stable polydopamine-functionalized black phosphorus and upconversion nanoparticles

The preparation of air-stable black phosphorus (BP) is challenging because atomic layers of BP degrade rapidly on exposure to oxygen. A strategy is presented for the synthesis of BP functionalized with polydopamine (PDA/BP). Dopamine was self-polymerized to yield polydopamine (PDA) which then was used to coat the surface of BP. PDA can be easily reduced and this prevents BP degradation. PDA/BP also is a viable matrix for the adsorption of proteins due to the presence of functional groups. Without any chemical activation, diethylstilbestrol (DES)-specific monoclonal antibody was adsorbed on the PDA/BP surface. PDA/BP quenches the fluorescence antigen-modified NaYF₄:Yb,Ho,Nd upconversion nanoparticles (UCNPs; photoexcited at 808 nm) via specific immuno recognition. Exposure to DES causes the dissociation of UCNP from the PDA/BP surface and fluorescence at 475, 525, 545 and 660 nm to recover. This is due to the DES competition with antigen for binding to the antibody. Based on this competitive immuno mechanism, a turn-on fluorometric immunoassay was constructed. It has a response that covers the 0.1 to 1000 ng mL^?1 DES concentration range with a detection limit of 83 pg mL^?1. This method was successfully applied to the determination of DES in spiked food and human urine samples.

Open image in new window

Graphical abstract Air-stable polydopamine-functionalized black phosphorus was obtained by modification of black phosphorus with polydopamine and then was coupled with specific monoclonal antibody. Combined with antigen-modified upconversion nanoparticles, a turn-on fluorometric immunoassay was constructed to detect diethylstilbestrol.

     

一步法合成的FeOOH/黑磷纳米复合材料协同实现体系优异的析氧性能

通过水热法,在黑磷(BP)纳米片表面生长FeOOH纳米材料,制备出FeOOH/BP纳米复合材料。作为电化学析氧反应(OER)催化剂,该复合材料在20 mA·cm^-2时的过电位仅为191 mV,Tafel斜率为49.9 mV dec^-1;在循环1 000圈后,过电位仅仅增加了3 mV,且循环过程中元素价态不变,表现出优秀的稳定性。纳米FeOOH负载于BP表面,客观上能隔断氧气对BP的氧化,保护BP的载流子传导性能。同时,生长的FeOOH颗粒尺度小,结晶性弱,这有利于丰富其活性位点,增大活性面积。