聚苯胺-还原氧化石墨烯复合材料的比电容及超级电容性能

Flaky polyaniline-reduced graphene oxide (PANI-rGO) composites have larger specific capacitance due to the improved redox charge of PANI in the composites, fabricated by simultaneous reduction of PANI-GO. The structural and morphological analyses were carried out using scanning electron microscopy, UV-Vis spectroscopy, and thermogravimetry. The results showed that the composites are flaky in shape. PANI is uniformly coated on GO, and PANI-rGO has specific capacitance as high as 1069 F·g^-1 (1.71 F·cm^-2) at a current density of 20 A·g^-1, 5 times higher than PANI-GO; this is caused by the large surface and conductivity of the rGO in the composite.     

Sodium‐Ion Storage Properties of FeS–Reduced Graphene Oxide Composite Powder with a Crumpled Structure

The sodium‐ion storage properties of FeS–reduced graphene oxide (rGO) and Fe₃O₄‐rGO composite powders with crumpled structures have been studied. The Fe₃O₄‐rGO composite powder, prepared by one‐pot spray pyrolysis, could be transformed to an FeS‐rGO composite powder through a simple sulfidation treatment. The mean size of the Fe₃O₄ nanocrystals in the Fe₃O₄‐rGO composite powder was 4.4 nm. After sulfidation, FeS nanocrystals of size several hundred nanometers were confined within the crumpled structure of the rGO matrix. The initial discharge capacities of the FeS‐rGO and Fe₃O₄‐rGO composite powders were 740 and 442 mA h g^?1, and their initial charge capacities were 530 and 165 mA h g^?1, respectively. The discharge capacities of the FeS‐rGO and Fe₃O₄‐rGO composite powders at the 50th cycle were 547 and 150 mA h g^?1, respectively. The FeS‐rGO composite powder showed superior sodium‐ion storage performance compared to the Fe₃O₄‐rGO composite powder.     

羧基化氧化石墨烯的可控合成及血液相容性

采用自由基引发剂偶氮二异丁腈(AIBN)作为功能改性剂, 通过AIBN分解产生的异丁腈自由基进攻氧化石墨烯上五元环与七元环的缺陷点, 形成氰基改性氧化石墨烯中间体, 再通过水解反应制得羧基化氧化石墨烯[GeneO-C(CH₃)₂-COOH]纳米材料. 采用傅里叶变换红外光谱(FTIR), X射线衍射(XRD), 热重分析(TGA)和原子力显微镜(AFM)等方法对合成的材料进行了表征, 并采用复钙时间测试考察了材料的血液相容性. 研究结果表明, 氧化石墨烯中羧基的含量可以通过调整AIBN和GeneO的投料比来控制. 本方法不但可提高氧化石墨烯的羧基含量, 而且可使其具有良好的血液相容性.     

Injectable Graphene Oxide/Graphene Composite Supramolecular Hydrogel for Delivery of Anti-Cancer Drugs

Injectable hydrogels have attracted a lot of attention in drug delivery, however, their capacity to deliver water-insoluble or hydrophobic anti-cancer drugs is limited. Here, we developed injectable graphene oxide/graphene composite supramolecular hydrogels to deliver anti-cancer drugs. Pluronic F-127 was used to stabilize graphene oxide (GO) and reduced graphene oxide (RGO) in solution, which was mixed with α-cyclodextrin (α-CD) solution to form hydrogels. Native hydrogel was used as control. GO or RGO slightly shortened gelation time. The storage and loss moduli of the hydrogels were tracked by dynamic force measurement. The storage modulus of GO or RGO composite hydrogels was larger than that of the native hydrogel. Hydrogels were unstable in solution and eroded gradually. GO or RGO in Pluronic F-127 solution could potentially improve the solubility of the water-insoluble anti-cancer drug camptothecin (CPT), especially with large drug-loaded CPT amount. Drug release behaviors from solutions and hydrogels were characterized. The nanocomponents (GO or RGO) were able to bind more drug molecules either for CPT or for doxorubicin hydrochloride (DXR) in solution. Therefore, GO or RGO composite hydrogel could potentially enable better controlled and gentler drug release (for both CPT and DXR) than native hydrogel.     

壳聚糖/氧化石墨烯纳米复合材料的形态和力学性能研究

通过溶液共混法成功制备了氧化石墨烯/壳聚糖纳米复合材料. 透射电镜(TEM)结果表明, 氧化石墨烯纳米粒子在壳聚糖基体中分散良好. 拉伸实验结果表明, 随氧化石墨烯含量的增加, 氧化石墨烯/壳聚糖纳米复合材料的杨氏模量和拉伸强度均显著改善, 加入4 wt%的氧化石墨烯能够使纳米复合材料的杨氏模量和拉伸强度分别提高123%和117%|但另一方面, 却也在一定程度上使复合材料的断裂伸长率或韧性下降.     

The Effects of Hydrophobicity and Textural Properties on Hexamethyldisiloxane Adsorption in Reduced Graphene Oxide Aerogels

To expand the applications of graphene-based materials to biogas purification, a series of reduced graphene oxide aerogels (rGOAs) were prepared from industrial grade graphene oxide using a simple hydrothermal method. The influences of the hydrothermal preparation temperature on the textural properties, hydrophobicity and physisorption behavior of the rGOAs were investigated using a range of physical and spectroscopic techniques. The results showed that the rGOAs had a macro-porous three-dimensional network structure. Raising the hydrothermal treatment temperature reduced the number of oxygen-containing groups, whereas the specific surface area (S_BET), micropore volume (V_micro) and water contact angle values of the rGOAs all increased. The dynamic adsorption properties of the rGOAs towards hexamethyldisiloxane (L2) increased with increasing hydrothermal treatment temperature and the breakthrough adsorption capacity showed a significant linear association with S_BET, V_micro and contact angle. There was a significant negative association between the breakthrough time and inlet concentration of L2, and the relationship could be reliably predicted with a simple empirical formula. L2 adsorption also increased with decreasing bed temperature. Saturated rGOAs were readily regenerated by a brief heat-treatment at 100 °C. This study has demonstrated the potential of novel rGOA for applications using adsorbents to remove siloxanes from biogas.     

Hybrid Gels Assembled from Fmoc–Amino Acid and Graphene Oxide with Controllable Properties

A supramolecular gel is obtained from the self‐assembly of an ultralow‐molecular‐weight gelator (N‐fluorenyl‐9‐methoxycarbonyl glutamic acid) in good and poor solvents. The gelators can self‐assemble into a lamellar structure, which can further form twisted fibers and nanotubes in the gel phase. Rheological studies show that the gels are robust and rigid, and are able to rapidly self‐recover to a gel after being destroyed by shear force. Fluorescence experiments reveal the aggregation‐induced emission effects of the gel system; the fluorescence intensity is significantly enhanced by gel formation. Graphene oxide (GO) is introduced into the system efficiently to give a hybrid material, and the interaction between gelators–GO sheets is studied. Rheological and fluorescent studies imply that the mechanical properties and the fluorescent emission of the hybrid materials can be fine‐tuned by controlling the addition of GO.     

水热合成二硫化钨/石墨烯复合材料及其氧还原性能

以六氯化钨、硫代乙酰胺、氧化石墨烯为原料,采用一步水热法合成了二维的二硫化钨/石墨烯(WS₂/RGO)复合材料。水热合成的WS₂/RGO具有薄层的二维结构,且由于石墨烯的存在,WS₂以较少的层数形成薄片状生长在石墨烯的表面。尝试将这种非Pt类材料用于电催化氧化原反应,测试结果表明,WS₂在碱性条件下氧还原活性非常低,但是复合RGO形成WS₂/RGO复合材料后,电催化氧化原性能有了极大的提高,其起始电位为-0.17 V(vs SCE),转移电子数为3.7,极限电流密度为2.5 mA·cm^-2,同时其具有较好的抗甲醇性能和循环稳定性。这是因为WS₂/RGO复合材料的二维结构具有更高的电子传输速率,同时硫化钨和石墨烯可以发挥协同催化作用。这种新型的二硫化钨/石墨烯(WS₂/RGO)复合材料作为非贵金属催化剂表现出良好的氧还原性能,在燃料电池上具有较好的应用前景。     

水热合成二硫化钨/石墨烯复合材料及其氧还原性能

以六氯化钨、硫代乙酰胺、氧化石墨烯为原料,采用一步水热法合成了二维的二硫化钨/石墨烯(WS_2/RGO)复合材料。水热合成的WS_2/RGO具有薄层的二维结构,且由于石墨烯的存在,WS_2以较少的层数形成薄片状生长在石墨烯的表面。尝试将这种非Pt类材料用于电催化氧化原反应,测试结果表明,WS_2在碱性条件下氧还原活性非常低,但是复合RGO形成WS_2/RGO复合材料后,电催化氧化原性能有了极大的提高,其起始电位为-0.17 V(vs SCE),转移电子数为3.7,极限电流密度为2.5 m A·cm-2,同时其具有较好的抗甲醇性能和循环稳定性。这是因为WS_2/RGO复合材料的二维结构具有更高的电子传输速率,同时硫化钨和石墨烯可以发挥协同催化作用。这种新型的二硫化钨/石墨烯(WS_2/RGO)复合材料作为非贵金属催化剂表现出良好的氧还原性能,在燃料电池上具有较好的应用前景。     

氧化石墨烯/PMMA和表面官能化的石墨烯/PMMA复合材料的制备及其力学性能的研究

使用简单的溶液共混的方法制备了氧化石墨烯/聚甲基丙烯酸甲酯(GO/PMMA)和表面官能化的石墨烯/聚甲基丙烯酸甲酯复合材料.通过透射电镜(TEM),扫描电镜(SEM)和原子力显微镜(AFM)观察了石墨烯及复合材料的表观形貌.通过拉伸实验表征了其力学性能,研究发现随着石墨烯的加入,其拉伸强度和断裂伸长率都有所改善,而且表面官能化的石墨烯的复合材料的改善效果要优于氧化石墨烯.     

氧化石墨烯水热还原前后的发光光谱

分别采用改进Hummers方法和水热还原法制备了氧化石墨烯(GO)和还原氧化石墨烯(RGO)。 GO和RGO经透射电子显微镜(TEM)、紫外-可见吸收光谱(UV-Vis)、红外光谱(IR)、荧光发射和激发光谱(PL、PLE)等技术手段进行了表征。 荧光发射光谱显示,氧化石墨烯(GO)在可见光的激发下可以得到波长在600~800 nm范围内的宽谱近红外荧光。 通过比较氧化石墨烯水热还原前后的光谱变化,发现氧化石墨烯近红外荧光起源于氧化石墨烯的表面含氧基团,如C=O、COOH。 近红外荧光穿透性好、对生物组织损坏小,非常适合于生物成像,预示着氧化石墨烯在生物成像方面的应用潜力。     

氧化石墨烯薄膜的光电化学性质

用改进的Hummers法制备了氧化石墨烯(GO), 在质子化的氧化铟-氧化硒导电玻璃基片上制备了静电自组装薄膜, 通过紫外-可见光谱和扫描电镜对薄膜进行了表征并研究了薄膜的光电化学性质. 结果表明, GO薄膜是一种稳定的光电阴极材料, 在光强为100 mW/cm²的白光照射下, 偏压为－0.4 V时, 0.1 mol•L^－1的Na₂SO₄溶液中薄膜电极的光电流密度达3.72 μA/cm².     

磷酸钒锂/石墨烯复合正极材料的制备及表征

通过三聚氰胺甲醛树脂(MR)中的羟基与石墨烯氧化物(GO)中的羧基发生的沉淀反应来制备功能化的氧化石墨烯前驱体,然后利用溶胶-凝胶及高温热处理方法制备磷酸钒锂/石墨烯复合材料,利用此材料制备了电池电极,并对电极材料进行了结构和电化学表征。结果表明,所得磷酸钒锂为单斜晶系结构,石墨烯堆叠程度显著降低,也有效避免了磷酸钒锂颗粒的团聚,提高了材料的电化学性能。电池的充放电曲线极化较小,在3.0~4.3 V的区间内20 C倍率仍有86 mA·h/g的可逆容量。0.1 C循环100次后容量为119.7 mA·h/g,容量保持率94%。在3.0~4.8 V的高电压区间,10 C倍率下可逆容量80 mA·h/g,0.1 C循环100次后仍有145.6 mA·h/g的可逆容量。优异的循环和倍率性能以及较低的碳含量符合锂离子正极材料实用的要求。     

Facile Synthesis of Nitrogen‐Doped Graphene Aerogels for Electrode Materials in Supercapacitors

Three‐dimensional porous nitrogen‐doped graphene aerogels (NGAs ) were synthesized by using graphene oxide (GO ) and chitosan (CS ) via a self‐assembly process by one‐pot hydrothermal method. The morphology and structure of the as‐prepared materials were characterized by means of scanning electron microscopy, transmission electron microscopy, X‐ray diffraction, XPS spectroscopy, Raman spectroscopy, nitrogen adsorption/desorption measurement and Fourier transform infrared spectroscopy. The electrochemical performance of NGAs was studied by cyclic voltammetry, galvanostatic charge/discharge and impedance spectroscopy measurements. The microstructure, surface area and capacitance of NGAs could be facilely controlled by adding different amounts of chitosan. The prepared NGA ‐4 showed a specific capacitance of 148.0 F/g at the discharge current density of 0.5 A/g and also retained 95.3% of the initial capacitance after 5000 cycles at the scan rate of 10 mV /s. It provided a possible way to obtain graphene based materials with high surface area and capacitance.     

部分还原氧化石墨烯/二氧化钛复合材料的水热合成及其光催化活性

采用水热法以Hummers氧化法制备的氧化石墨和钛酸四丁酯为原料制备了部分还原的氧化石墨烯/二氧化钛(RGO/TiO₂)复合光催化剂, 并研究了该复合材料在可见光以及紫外光下对亚甲基蓝的光催化降解活性.结果表明, 通过改变反应温度和氧化石墨加入量可以调控TiO₂的晶相组成及其在复合材料中的分散性; 在水热反应过程中氧化石墨烯发生了部分还原; 所制备的RGO/TiO₂复合材料的可见光和紫外光催化活性均高于纯TiO₂; 部分还原的氧化石墨烯在复合材料中担当载体和电子受体, 同时可以使TiO₂的初始吸收边向可见光区域红移, 增强了TiO₂在可见光区域的吸收, 能有效提高对目标污染物的吸附性和光催化降解活性.     

钒酸银/氧化石墨烯复合物的制备和可见光催化性能

通过改进Hummers法制备了氧化石墨烯(GO),采用液相沉淀法合成了Ag₃VO₄/GO复合物,利用X射线衍射(XRD)、扫描电子显微镜(SEM)和紫外-可见(UV-Vis)漫反射光谱等技术手段对样品进行了测试表征;并在可见光辐射下(λ≥420 nm)考察了复合物催化剂中GO含量对Ag₃VO₄光催化降解甲基橙溶液(MO)的性能影响。 结果表明,掺杂质量分数2%的GO复合物光催化活性提高最显著,30 min内对MO的降解率可达到89%以上,是纯Ag₃VO₄光催化活性的3倍。     

Syntheses,Characterizations and Adsorption Properties of MIL‐101/Graphene Oxide Composites

Composites of the Cr³⁺‐based metal‐organic framework (MIL‐101) and graphene oxide (GO) have been synthesized with different ratios of MIL‐101 and GO. The composites and the parent material MIL‐101 were characterized by X‐ray diffraction, scanning electron microscopy and nitrogen adsorption. The results indicated that the incorporation of large amounts of GO (10 and 20 wt%) almost did not prevent the formation of MIL‐101 units, but had an obvious impact on the size of MIL‐101 crystals. On the contrary, small amounts of GO added (2 and 5 wt%) prevented significantly the proper assembly of MIL‐101 units, thus resulting in a pronounced decrease in the porosities of composites.