Robust Binding between Carbon Nitride Nanosheets and a Binuclear Ruthenium(II) Complex Enabling Durable,Selective CO2 Reduction under Visible Light in Aqueous Solution

Carbon nitride nanosheets (NS‐C₃N₄) were found to undergo robust binding with a binuclear ruthenium(II) complex ( RuRu′ ) even in basic aqueous solution. A hybrid material consisting of NS‐C₃N₄ (further modified with nanoparticulate Ag) and RuRu ′ promoted the photocatalytic reduction of CO₂ to formate in aqueous media, in conjunction with high selectivity (approximately 98 %) and a good turnover number (>2000 with respect to the loaded Ru complex). These represent the highest values yet reported for a powder‐based photocatalytic system during CO₂ reduction under visible light in an aqueous environment. We also assessed the desorption of RuRu ′ from the Ag/C₃N₄ surface, a factor that can contribute to a loss of activity. It was determined that desorption is not induced by salt additives, pH changes, or photoirradiation, which partly explains the high photocatalytic performance of this material.     

Ultrathin g‐C3N4 Nanosheets Coupled with AgIO3 as Highly Efficient Heterostructured Photocatalysts for Enhanced Visible‐Light Photocatalytic Activity

The photocatalytic activity of graphite‐like carbon nitride (g‐C₃N₄) could be enhanced by heterojunction strategies through increasing the charge‐separation efficiency. As a surface‐based process, the heterogeneous photocatalytic process would become more efficient if a larger contact region existed in the heterojunction interface. In this work, ultrathin g‐C₃N₄ nanosheets (g‐C₃N₄‐NS) with much larger specific surface areas are employed instead of bulk g‐C₃N₄ (g‐C₃N₄‐B) to prepare AgIO₃/g‐C₃N₄‐NS nanocomposite photocatalysts. By taking advantage of this feature, the as‐prepared composites exhibit remarkable performances for photocatalytic wastewater treatment under visible‐light irradiation. Notably, the optimum photocatalytic activity of AgIO₃/g‐C₃N₄‐NS composites is almost 80.59 and 55.09 times higher than that of pure g‐C₃N₄‐B towards the degradation of rhodamine B and methyl orange pollutants, respectively. Finally, the stability and possible photocatalytic mechanism of the AgIO₃/g‐C₃N₄‐NS system are also investigated.     

Facile one‐step synthesis of broken case‐like carbon‐doped g‐C3N4 for photocatalytic degradation of benzene

Herein, a novel broken case‐like carbon‐doped g‐C₃N₄ photocatalyst was obtained via a facile one‐pot pyrolysis and cost‐effective method using glyoxal‐modified melamine as a precursor. The obtained carbon/g‐C₃N₄ photocatalyst showed remarkable enhanced photocatalytic activity in the degradation of gaseous benzene compared with that of pristine g‐C₃N₄ under visible light. The pseudo‐first‐order rate constant for gaseous benzene degradation on carbon/g‐C₃N₄ was 0.186 hr^?1, 5.81 times as large as that of pristine g‐C₃N₄. Furthermore, a possible photocatalytic mechanism for the improved photocatalytic performance over carbon/g‐C₃N₄ nanocomposites was proposed.     

Sunlight‐Driven Hydrogen Peroxide Production from Water and Molecular Oxygen by Metal‐Free Photocatalysts

Design of green, safe, and sustainable process for the synthesis of hydrogen peroxide (H₂O₂) is a very important subject. Early reported processes, however, require hydrogen (H₂) and palladium‐based catalysts. Herein we propose a photocatalytic process for H₂O₂ synthesis driven by metal‐free catalysts with earth‐abundant water and molecular oxygen (O₂) as resources under sunlight irradiation (λ>400 nm). We use graphitic carbon nitride (g‐C₃N₄) containing electron‐deficient aromatic diimide units as catalysts. Incorporating the diimide units positively shifts the valence‐band potential of the catalysts, while maintaining sufficient conduction‐band potential for O₂ reduction. Visible light irradiation of the catalysts in pure water with O₂ successfully produces H₂O₂ by oxidation of water by the photoformed valence‐band holes and selective two‐electron reduction of O₂ by the conduction band electrons.     

Robust Binding between Carbon Nitride Nanosheets and a Binuclear Ruthenium(II) Complex Enabling Durable,Selective CO2 Reduction under Visible Light in Aqueous Solution

Carbon nitride nanosheets (NS‐C₃N₄) were found to undergo robust binding with a binuclear ruthenium(II) complex ( RuRu′ ) even in basic aqueous solution. A hybrid material consisting of NS‐C₃N₄ (further modified with nanoparticulate Ag) and RuRu ′ promoted the photocatalytic reduction of CO₂ to formate in aqueous media, in conjunction with high selectivity (approximately 98 %) and a good turnover number (>2000 with respect to the loaded Ru complex). These represent the highest values yet reported for a powder‐based photocatalytic system during CO₂ reduction under visible light in an aqueous environment. We also assessed the desorption of RuRu ′ from the Ag/C₃N₄ surface, a factor that can contribute to a loss of activity. It was determined that desorption is not induced by salt additives, pH changes, or photoirradiation, which partly explains the high photocatalytic performance of this material.     

Synthesis of Ordered Porous Graphitic‐C3N4 and Regularly Arranged Ta3N5 Nanoparticles by Using Self‐Assembled Silica Nanospheres as a Primary Template

Uniform‐sized silica nanospheres (SNSs) assembled into close‐packed structures were used as a primary template for ordered porous graphitic carbon nitride (g‐C₃N₄), which was subsequently used as a hard template to generate regularly arranged Ta₃N₅ nanoparticles of well‐controlled size. Inverse opal g‐C₃N₄ structures with the uniform pore size of 20–80 nm were synthesized by polymerization of cyanamide and subsequent dissolution of the SNSs with an aqueous HF solution. Back‐filling of the C₃N₄ pores with tantalum precursors, followed by nitridation in an NH₃ flow gave regularly arranged, crystalline Ta₃N₅ nanoparticles that are connected with each other. The surface areas of the Ta₃N₅ samples were as high as 60 m² g⁻¹, and their particle size was tunable from 20 to 80 nm, which reflects the pore size of g‐C₃N₄. Polycrystalline hollow nanoparticles of Ta₃N₅ were also obtained by infiltration of a reduced amount of the tantalum source into the g‐C₃N₄ template. An improved photocatalytic activity for H₂ evolution on the assembly of the Ta₃N₅ nanoparticles under visible‐light irradiation was attained as compared with that on a conventional Ta₃N₅ bulk material with low surface area.     

Highly Selective and Stable Reduction of CO2 to CO by a Graphitic Carbon Nitride/Carbon Nanotube Composite Electrocatalyst

A stable and selective electrocatalyst for CO₂ reduction was fabricated by covalently attaching graphitic carbon nitride onto multiwall carbon nanotubes (g‐C₃N₄/MWCNTs). The as‐prepared composite is able to reduce CO₂ exclusively to CO with a maximum Faraday efficiency of 60 %, and no decay in the catalytic activity was observed even after 50 h of reaction. The enhanced catalytic activity towards CO₂ reduction is attributed to the formation of active carbon–nitrogen bonds, high specific surface area, and improved material conductivity of the g‐C₃N₄/MWCNT composite.     

Highly Selective Photoreduction of CO2 with Suppressing H2 Evolution over Monolayer Layered Double Hydroxide under Irradiation above 600 nm

Although progress has been made to improve photocatalytic CO₂ reduction under visible light (λ>400 nm), the development of photocatalysts that can work under a longer wavelength (λ>600 nm) remains a challenge. Now, a heterogeneous photocatalyst system consisting of a ruthenium complex and a monolayer nickel‐alumina layered double hydroxide (NiAl‐LDH), which act as light‐harvesting and catalytic units for selective photoreduction of CO₂ and H₂O into CH₄ and CO under irradiation with λ>400 nm. By precisely tuning the irradiation wavelength, the selectivity of CH₄ can be improved to 70.3 %, and the H₂ evolution reaction can be completely suppressed under irradiation with λ>600 nm. The photogenerated electrons matching the energy levels of photosensitizer and m‐NiAl‐LDH only localized at the defect state, providing a driving force of 0.313 eV to overcome the Gibbs free energy barrier of CO₂ reduction to CH₄ (0.127 eV), rather than that for H₂ evolution (0.425 eV).     

Graphitic C3N4 Decorated with CoP Co‐catalyst: Enhanced and Stable Photocatalytic H2 Evolution Activity from Water under Visible‐light Irradiation

In this work, graphitic C₃N₄ decorated with a CoP co‐catalyst (g‐C₃N₄/CoP) is reported for photocatalytic H₂ evolution reaction based on two‐step hydrothermal and phosphidation method. The structure of g‐C₃N₄/CoP is well confirmed by XRD, FTIR, TEM, XPS, and UV/Vis diffuse reflection spectra techniques. When the weight percentage of CoP loading is 3.4 wt % (g‐C₃N₄/CoP‐3.4 %), the highest H₂ evolution amount of 8.4×10² μmol g⁻¹ is obtained, which is 1.1×10³ times than that over pure g‐C₃N₄. This value also is comparable with that of g‐C₃N₄ loaded by the same amount of Pt. In cycling experiments, g‐C₃N₄/CoP‐3.4 % shows a stable photocatalytic activity. In addition, g‐C₃N₄/CoP‐3.4 % is an efficient photocatalyst for H₂ evolution under irradiation with natural solar light. Based on comparative photoluminescence emission spectra, photoelectrochemical I –t curves, EIS Nyquist plots, and polarization curves between g‐C₃N₄/CoP‐3.4 % and pure g‐C₃N₄, it is concluded that the presence of the CoP co‐catalyst accelerates the separation and transfer of photogenerated electrons of g‐C₃N₄, thus resulting in improved photocatalytic activity in the H₂ evolution reaction.     

Utilization of N,N‐Dialkylcarbamic Acid Derived from Secondary Amines and Supercritical Carbon Dioxide: Stereoselective Synthesis of Z Alkenyl Carbamates with a CO2‐Soluble Ruthenium–P(OC2H5)3 Catalyst

Reversible transformation of diethylamine ( 1 ) and supercritical carbon dioxide (scCO₂) into N,N‐diethylcarbamic acid ( 2 ) was confirmed by direct acquisition of ¹H and ¹³C{¹H} NMR spectra. The equilibrium between 1 +CO₂ and 2 is strongly influenced by conditions of the supercritical state. Low temperature favors formation of carbamic acid, whereas high temperature causes decarboxylation. On the basis of the spectroscopic results of carbamic acid formation under scCO₂ conditions, the ruthenium‐catalyzed formation of alkenyl carbamates from terminal alkynes, 1 , and carbon dioxide was investigated to demonstrate the useful transformation of elusive carbamic acids. Selectivity toward the CO₂‐fixation products over enynes obtained by dimerization of the alkyne substrates was improved by the use of scCO₂ as a reaction medium. In particular, a CO₂‐soluble ruthenium complex, trans‐[RuCl₂{P(OC₂H₅)₃}₄], was found to be effective in affording Z alkenyl carbamates with high stereoselectivity.     

Acid‐treated g‐C3N4‐Cu2O composite catalyst with enhanced photocatalytic activity under visible‐light irradiation

Acid‐treated g‐C₃N₄‐Cu₂O was prepared by hydrothermal reduction followed by high temperature calcination and acid exfoliation. The structures and properties of as‐synthesized samples were characterized using a range of techniques, such as X‐ray photoelectron spectroscopy, scanning electron microscopy, Photoluminescence Spectroscopy and the Brunauer–Emmett–Teller (BET) theory. The photocatalytic activity was evaluated by measuring the photodegradation of methyl orange under visible‐light irradiation. Based on the results of TEM, XPS, EPR and other techniques, it was verified that a heterojunction was formed. The acid treatment process can increase the specific surface area to form abundant heterojunction interfaces as channels for photo‐generated carrier separation, thereby enhancing its light utilization and quantum efficiency. Results indicate that acid‐treated g‐C₃N₄‐Cu₂O possesses a large specific surface area, which provides plentiful activated sites for heterojunctions to form; in addition, it showed a high visible light effect and the minimum charge‐transfer resistance. Furthermore, the g‐C₃N₄‐Cu₂O material exhibits high levels of effectiveness and stability. Electron paramagnetic resonance and a series of radical trapping experiments demonstrate that the holes and ?O₂^? could be the main active species in methyl orange photodegradation. This work could provide new insights into the fabrication of composite materials as high‐performance photocatalysts, and facilitate their application in addressing environmental protection issues.     

Computational Design of New Heterofullerene‐Based Biomimetic α‐Carbonic Anhydrase Analogues

The biomimetic CO₂ hydration activity of Ru/Rh‐doped fullerenes was revealed by using density functional theory calculations. The mechanism of CO₂ hydration on the proposed heterofullerenes followed the mechanistic action of α‐carbonic anhydrases, and consisted of the adsorption and deprotonation of H₂O, CO₂ interaction with hydroxyl groups, CO₂ bending, and proton transfer to give the product. Free‐energy landscapes for the reaction showed the catalysts to be active for the reaction. H₂O adsorption over the catalysts was exergonic whereas CO₂ adsorption over the catalyst–OH complex was observed to be an endergonic process. Intramolecular proton transfer resulting in the final product, , was found to be the rate‐limiting step for the reaction on C₅₆N₃M (M=Ru/Rh), whereas H₂O dissociation was found to be the rate‐limiting step for the reaction on C₅₉M (M=Ru/Rh). C₅₆N₃M catalysts were found to be superior to C₅₉M catalysts for biomimetic CO₂ hydration, as indicated by the free‐energy landscapes and energy requirements.     

A Porphyrin‐Based Porous rtl Metal–Organic Framework as an Efficient Catalyst for the Cycloaddition of CO2 to Epoxides

A porous rtl metal–organic framework (MOF) [Mn₅L(H₂O)₆?(DMA)₂]?5DMA?4C₂H₅OH ( 1? Mn) (H₁₀L=5,10,15,20‐tetra(4‐(3,5‐dicarboxylphenoxy)phenyl)porphyrin; DMA=N,N′‐dimethylacetamide) was synthesized by employing a new porphyrin‐based octacarboxylic acid ligand. 1? Mn exhibits high Mn^II density in the porous framework, providing it great Lewis‐acid heterogeneous catalytic capability for the cycloaddition of CO₂ with epoxides. Strikingly, 1? Mn features excellent catalytic activity to the cycloaddition of CO₂ to epoxides, with a remarkable initial turnover frequency 400 per mole of catalyst per hour at 20 atm. As‐synthesized 1? Mn also exhibits size selectivity to different epoxide substrates on account of their steric hindrance. The high catalytic activity, size selectivity, and stability toward the epoxides on catalytic cycloaddition of CO₂ make 1? Mn a promising heterogeneous catalyst for fixation and utilization of CO₂.     

Ligand and Metal Effects on the Stability and Adsorption Properties of an Isoreticular Series of MOFs Based on T‐Shaped Ligands and Paddle‐Wheel Secondary Building Units

The synthesis of stable porous materials with appropriate pore size and shape for desired applications remains challenging. In this work a combined experimental/computational approach has been undertaken to tune the stability under various conditions and the adsorption behavior of a series of MOFs by subtle control of both the nature of the metal center (Co²⁺, Cu²⁺, and Zn²⁺) and the pore surface by the functionalization of the organic linkers with amido and N‐oxide groups. In this context, six isoreticular MOFs based on T‐shaped ligands and paddle‐wheel units with ScD_0.33 topology have been synthesized. Their stabilities have been systematically investigated along with their ability to adsorb a wide range of gases (N₂, CO₂, CH₄, CO, H_2, light hydrocarbons (C₁–C₄)) and vapors (alcohols and water). This study has revealed that the MOF frameworks based on Cu²⁺ are more stable than their Co²⁺ and Zn²⁺ analogues, and that the N‐oxide ligand endows the MOFs with a higher affinity for CO₂ leading to excellent selectivity for this gas over other species.     

NHC‐Containing Manganese(I) Electrocatalysts for the Two‐Electron Reduction of CO2

The synthesis and characterization of the first catalytic manganese N‐heterocyclic carbene complexes are reported: MnBr(N‐methyl‐N′‐2‐pyridylbenzimidazol‐2‐ylidine)(CO)₃ and MnBr(N‐methyl‐N′‐2‐pyridylimidazol‐2‐ylidine)(CO)₃. Both new species mediate the reduction of CO₂ to CO following two‐electron reduction of the Mn^I center, as observed with preparative scale electrolysis and verified with ¹³CO₂. The two‐electron reduction of these species occurs at a single potential, rather than in two sequential steps separated by hundreds of millivolts, as is the case for previously reported MnBr(2,2′‐bipyridine)(CO)₃. Catalytic current enhancement is observed at voltages similar to MnBr(2,2′‐bipyridine)(CO)₃.     

Catalytic Conversion of CO2 to Cyclic Carbonates through Multifunctional Zinc‐Modified ZSM‐5 Zeolite

The production of fine chemicals using CO₂ as C₁ building block through inexpensive heterogeneous catalysts with high efficiency under low pressure is challenging. Herein we propose for the first time the utilization of a multifunctional heterogeneous zinc‐modified HZSM‐5 (ZnHZSM‐5) catalyst for upgrading CO₂ by incorporation into cyclic carbonates from CO₂ and epoxides. Owing to the nice surface properties such as abundant Lewis acid, Brønsted acid and Lewis base sites, large surface area, and plenty of micropores, CO₂ could be concentrated and well activated in ZnHZSM‐5 verified by CO₂‐TPD, TG‐MS, etc. Meanwhile, the epoxides were also activated through metal center and hydrogen bond. Therefore, the reaction can easily assemble at the catalyst interface and show exceptional performance, affording the aimed products with high yield of up to 99% in the presence of commercial tetra‐n‐propylammonium bromide (90% in kilogram scale with 0.004 mol% ZnHZSM‐5 and 0.015 mol% ⁿPr₄NBr).     

Gas sorption and characterization of poly(ether‐b‐amide) segmented block copolymers

The solubilities of He, H₂, N₂, O₂, CO₂, CH₄, C₂H₆, C₃H₈, and n‐C₄H₁₀ were determined at 35°C and pressures up to 27 atmospheres in a systematic series of phase separated polyether–polyamide segmented block copolymers containing either poly(ethylene oxide) [PEO] or poly(tetramethylene oxide) [PTMEO] as the rubbery polyether phase and nylon 6 [PA6] or nylon 12 [PA12] as the hard polyamide phase. Sorption isotherms are linear for the least soluble gases (He, H₂, N₂, O₂, and CH₄), convex to the pressure axis for more soluble penetrants (CO₂, C₃H₈, and n‐C₄H₁₀) and slightly concave to the pressure axis for ethane. These polymers exhibit high CO₂/N₂ and CO₂/H₂ solubility selectivity. This property appears to derive mainly from high carbon dioxide solubility, which is ascribed to the strong affinity of the polar ether linkages for CO₂. As the amount of the polyether phase in the copolymers increases, gas solubility increases. The solubility of all gases is higher in polymers with less polar constituents, PTMEO and PA12, than in polymers with more polar PEO and PA6 units. CO₂/N₂ and CO₂/H₂ solubility selectivity, however, are higher in polymers with higher concentrations of polar repeat units. The sorption data are complemented with physical characterization (differential scanning calorimetry, elemental analysis, and wide angle X‐ray diffraction) of the various block copolymers. © 1999 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 37: 2463–2475, 1999     

Palladium Nanoparticles Supported on Titanium‐Doped Graphitic Carbon Nitride for Formic Acid Dehydrogenation

Pd nanoparticles (NPs) supported on Ti‐doped graphitic carbon nitride (g‐C₃N₄) were synthesized by a deposition–precipitation route and a subsequent reduction with NaBH₄. The features of the NPs were studied by XRD, TEM, FTIR, XPS, EXAFS and N₂‐physisorption measurements. It was found that the NPs had an average size of 2.9 nm and presented a high dispersion on the surface of Ti‐doped g‐C₃N₄. Compared to Pd loaded on pristine g‐C₃N₄, the Pd NPs supported on Ti‐doped g‐C₃N₄ exhibited a high catalytic activity in formic acid dehydrogenation in water at room temperature. The enhanced activity could be attributed to the small Pd NPs size, as well as the strong interaction between Pd NPs and Ti‐doped g‐C₃N₄.     

Solar Hydrogen from an Aqueous,Noble‐Metal‐Free Hybrid System in a Continuous‐Flow Sampling Reaction System

We introduce the visible‐light photocatalytic H₂ evolution reaction as catalyzed by a cobaloxime/carbon nitride (C₃N₄) noble‐metal‐free hybrid photosystem by using a continuous‐flow sampling reaction system. The photocatalytic H₂ evolution rate is highly dependent on the structure of C₃N₄, in which porous C₃N₄ shows the best activity compared with bulk C₃N₄ (lamellar) and C₃N₄ nanosheets. When using porous C₃N₄, the system is neither affected by the solution pH, nor the C₃N₄ concentration, nor the structure of the cobaloxime complex.     

Defect‐Free Mixed‐Matrix Membranes with Hydrophilic Metal‐Organic Polyhedra for Efficient Carbon Dioxide Separation

Defect‐free mixed‐matrix membranes (MMMs) were prepared by incorporating hydrophilic metal‐organic polyhedra (MOPs) into cross‐linked polyethylene oxide (XLPEO) for efficient CO₂ separation. Hydrophilic MOPs with triethylene glycol pendant groups, which were assembled by 5‐tri(ethylene glycol) monomethyl ether isophthalic acid and Cu^II ions, were uniformly dispersed in XLPEO without particle agglomeration. Compared to conventional neat XLPEO, the homogenous dispersion of EG₃‐MOPs in XLPEO enhanced CO₂ permeability of MMMs. Upon increasing the amount of EG₃‐MOPs, the membrane performance such as CO₂/N₂ selectivity was steadily improved because of unsaturated Cu^II sites at paddle‐wheel units, which was confirmed by Cu K‐edge XANES and TPD analysis. Therefore, such defect‐free MMMs with unsaturated metal sites would contribute to enhance CO₂ separation performance.