An Inverted‐Sandwich Diuranium μ‐η5:η5‐Cyclo‐P5 Complex Supported by U‐P5 δ‐Bonding

Reaction of [U(Tren^TIPS)] [ 1 , Tren^TIPS=N(CH₂CH₂NSiiPr₃)₃] with 0.25 equivalents of P₄ reproducibly affords the unprecedented actinide inverted sandwich cyclo‐P₅ complex [{U(Tren^TIPS)}₂(μ‐η⁵:η⁵‐cyclo‐P₅)] ( 2 ). All prior examples of cyclo‐P₅ are stabilized by d‐block metals, so 2 shows that cyclo‐P₅ does not require d‐block ions to be prepared. Although cyclo‐P₅ is isolobal to cyclopentadienyl, which usually bonds to metals via σ‐ and π‐interactions with minimal δ‐bonding, theoretical calculations suggest the principal bonding in the U(P₅)U unit is polarized δ‐bonding. Surprisingly, the characterization data are overall consistent with charge transfer from uranium to the cyclo‐P₅ unit to give a cyclo‐P₅ charge state that approximates to a dianionic formulation. This is ascribed to the larger size and superior acceptor character of cyclo‐P₅ compared to cyclopentadienyl, the strongly reducing nature of uranium(III), and the availability of uranium δ‐symmetry 5f orbitals.     

Microwave‐Assisted Synthesis of β‐Lactams and Cyclo‐β‐dipeptides

Different cyclo‐β‐dipeptides were prepared from corresponding N‐substituted β‐alanine derivatives under mild conditions using PhPOCl₂ as activating agent in benzene and Et₃N as base. To evaluate β³‐substituent influence, the amino acids 7 – 26 were synthesized, and a β‐lactam formation reaction was carried out instead of cyclo‐β‐dipeptide formation. The crystal structures of three derivatives of cyclo‐β‐peptides and one β‐lactam are presented.     

1,1‐Diethyl‐1‐germa‐2,3,4,5‐tetra‐tert‐butyl‐2,3,4,5‐tetraphospholan (C2H5)2Ge(tBuP)4, Molekül‐ und Kristallstruktur

1,1‐Diethyl‐1‐germa‐2,3,4,5‐tetra‐ tert ‐butyl‐2,3,4,5‐tetraphospholane (C₂H₅)₂Ge( t BuP)₄, Molecular and Crystal Structure The reaction of the diphosphide K₂[(tBuP)₄] · THF ( 1 ) with the germanium(IV) compound (C₂H₅)₂GeCl₂ leads via a [4 + 1]‐cyclo‐condensation reaction to 1,1‐diethyl‐1‐germa‐2,3,4,5‐tetra‐tert‐butyl‐2,3,4,5‐tetraphospholane (C₂H₅)₂Ge(tBuP)₄ ( 2 ) with the 5‐membered GeP₄ ring system. 2 could be characterized ³¹P NMR spectroscopically, mass spectrometrically and by a single crystal structure analysis.     

Molybdän‐ und Wolfram‐Komplexe mit MNS‐Sequenzen. Die Kristallstrukturen von [MoCl3(N3S2)(1,4‐Dioxan)2] und [Mo2Cl2(μ‐NSN)2(μ‐O)(NCMe3)(OCMe3)2]2

Molybdenum and Tungsten Complexes with MNS Sequences. Crystal Structures of [MoCl₃(N₃S₂)(1,4‐dioxane)₂] and [Mo₂Cl₂(μ‐NSN)₂(μ‐O)(NCMe₃)(OCMe₃)₂]₂ The cyclo‐thiazeno complexes [Cl₃MNSNSN]₂ of molybdenum and tungsten react with 1,4‐dioxane in dichloromethane suspension to give the binuclear donor‐acceptor complexes [μ‐(1,4‐dioxane){MCl₃(N₃S₂)}₂] which are characterized by IR spectroscopy. With excess 1,4‐dioxane the molybdenum compound forms the complex [MoCl₃(N₃S₂)(1,4‐dioxane)₂] in which, according to the crystal structure determination, one of the dioxane molecules coordinates at the molybdenum atom, the other one at one of the sulfur atoms of the cyclo‐thiazeno ring. The μ‐(NSN^2–) complex [Mo₂Cl₂(μ‐NSN)₂(μ‐O)(NCMe₃)(OCMe₃)₂]₂ has been obtained by the reaction of [MoN(OCMe₃)₃] with trithiazyle chloride in carbontetrachloride solution. According to the crystal structure determination this compound forms centrosymmetric dimeric molecules via two of the nitrogen atoms of two of the μ‐(NSN) groups to give a Mo₂N₂ fourmembered ring. [MoCl₃(N₃S₂)(1,4‐dioxane)₂]: Space group P2₁/c, Z = 4, lattice dimensions at –70 °C: a = 1522.9(2); b = 990.3(1); c = 1161.7(1) pm; β = 106.31(1)°, R₁ = 0.0317. [Mo₂Cl₂(μ‐NSN)₂(μ‐O)(NCMe₃)(OCMe₃)₂]₂ · 4 CCl₄: Space group P2₁/c, Z = 2, lattice dimensions at –83 °C: a = 1216.7(1); b = 2193.1(2); c = 1321.8(1) pm; β = 98.23(1)°; R₁ = 0.0507.     

Kinetics of the gas‐phase reactions of cyclo‐CF2CFXCHXCHX – (X = H,F, Cl) with OH radicals at 253–328 K

Rate constants were determined for the reactions of OH radicals with halogenated cyclobutanes cyclo‐CF₂CF₂CHFCH₂? (k₁), trans‐cyclo‐CF₂CF₂CHClCHF? (k₂), cyclo‐CF₂CFClCH₂CH₂? (k₃), trans‐cyclo‐CF₂CFClCHClCH₂? (k₄), and cis‐cyclo‐CF₂CFClCHClCH₂? (k₅) by using a relative rate method. OH radicals were prepared by photolysis of ozone at a UV wavelength (254 nm) in 200 Torr of a sample reference H₂O? O₃? O₂? He gas mixture in an 11.5‐dm³ temperature‐controlled reaction chamber. Rate constants of k₁ = (5.52 ± 1.32) × 10^?13 exp[–(1050 ± 70)/T], k₂ = (3.37 ± 0.88) × 10^?13 exp[–(850 ± 80)/T], k₃ = (9.54 ± 4.34) × 10^?13 exp[–(1000 ± 140)/T], k₄ = (5.47 ± 0.90) × 10^?13 exp[–(720 ± 50)/T], and k₅ = (5.21 ± 0.88) × 10^?13 exp[–(630 ± 50)/T] cm³ molecule^?1 s^?1 were obtained at 253–328 K. The errors reported are ± 2 standard deviations, and represent precision only. Potential systematic errors associated with uncertainties in the reference rate constants could add an additional 10%–15% uncertainty to the uncertainty of k₁–k₅. The reactivity trends of these OH radical reactions were analyzed by using a collision theory–based kinetic equation. The rate constants k₁–k₅ as well as those of related halogenated cyclobutane analogues were found to be strongly correlated with their C? H bond dissociation enthalpies. We consider the dominant tropospheric loss process for the halogenated cyclobutanes studied here to be by reaction with the OH radicals, and atmospheric lifetimes of 3.2, 2.5, 1.5, 0.9, and 0.7 years are calculated for cyclo‐CF₂CF₂CHFCH₂? , trans‐cyclo‐CF₂CF₂CHClCHF? , cyclo‐CF₂CFClCH₂CH₂? , trans‐cyclo‐CF₂CFClCHClCH₂? , and cis‐cyclo‐CF₂CFClCHClCH₂? , respectively, by scaling from the lifetime of CH₃CCl₃. © 2009 Wiley Periodicals, Inc. Int J Chem Kinet 41: 532–542, 2009     

cyclo(β‐Asp‐β3‐hVal‐β3‐hLys) – Solid‐Phase Synthesis and Solution Structure of a Water Soluble β‐Tripeptide. Preliminary Communication

The H₂O‐soluble cyclic β³‐tripeptide cyclo(β‐Asp‐β³‐hVal‐β³‐hLys) ( 4 ) was obtained by on‐resin cyclization of the side‐chain‐anchored β‐peptide 3 (Scheme). In aqueous solution, 4 adopts a structure with uniformly oriented amide bonds and all side chains in lateral positions (Fig. 3).     

Detection of Cyclo‐N5− in THF Solution

Compelling evidence has been found for the formation and direct detection of the cyclopentazole anion (cyclo‐N₅^?) in solution. The anion was prepared from phenylpentazole in two steps: reduction by an alkali metal to form the phenylpentazole radical anion, followed by thermal dissociation to yield cyclo‐N₅^?. The reaction solution was analyzed by HPLC coupled with negative mode mass spectrometry. A signal with m/z 70 was eluted about 2.1 min after injection of the sample. Its identification as N₅ was supported by single and double labeling with ¹⁵N, which yielded signals at m/z=71 and 72, respectively, with identical retention times in the HPLC column. MS/MS analysis of the m/z=70 signal revealed a dissociation product with m/z=42, which can be assigned to N₃^?. To our knowledge this is the first preparation of cyclo‐N₅^? in the bulk. The compound is indefinitely stable at temperatures below ?40 °C, and has a half‐life of a few minutes at room temperature.     

Powder X‐ray study of racemic (2RS,3RS)‐5‐amino‐3‐[4‐(3‐methoxyphenyl)piperazin‐1‐yl]‐1,2,3,4‐tetrahydronaphthalen‐2‐ol

The structure of the title benzovesamicol analogue, C₂₁H₂₇N₃O₂, an important compound for the diagnosis of Alzheimer's disease, has been determined by X‐ray powder diffraction. The title compound was firstly synthesized and characterized by spectroscopic methods (FT–IR, and ¹³C and ¹H NMR). The compound is a racemic mixture of enantiomers which crystallizes in the monoclinic system in a centrosymmetric space group (P2₁/c). Crystallography, in particular powder X‐ray diffraction, was pivotal in revealing that the enantio‐resolution did not succeed. The piperazine ring is in a chair conformation, while the cyclohexene ring assumes a half‐chair conformation. The crystal packing is dominated by intermolecular O—H...N hydrogen bonding which links molecules along the c direction.     

Redox and Coordination Behavior of the Hexaphosphabenzene Ligand in [(Cp*Mo)2(μ,η6:η6‐P6)] Towards the “Naked” Cations Cu+, Ag+, and Tl+

Although the cyclo‐P₆ complex [(Cp*Mo)₂(μ,η⁶:η⁶‐P₆)] ( 1 ) was reported 30 years ago, little is known about its chemistry. Herein, we report a high‐yielding synthesis of 1 , the complex 2 , which contains an unprecedented cyclo‐P₁₀ ligand, and the reactivity of 1 towards the “naked” cations Cu⁺, Ag⁺, and Tl⁺. Besides the formation of the single oxidation products 3 a,b which have a bisallylic distorted cyclo‐P₆ middle deck, the [M( 1 )₂]⁺ complexes are described which show distorted square‐planar (M=Cu( 4 a ), Ag( 4 b )) or distorted tetrahedral coordinated (M=Cu( 5 )) M⁺ cations. The choice of solvent enabled control over the reaction outcome for Cu⁺, as proved by powder XRD and supported by DFT calculations. The reaction with Tl⁺ affords a layered two‐dimensional coordination network in the solid state.     

Synthesis of Cyclo‐β‐tripeptides and Their Biological in vitro Evaluation as Antiproliferatives against the Growth of Human Cancer Cell Lines

A number of cyclo‐β‐tripeptides and their linear precursors were subjected to primary biological evaluation for cancer‐cell growth inhibition (one‐dose, three‐cell essay), and the five most active ones were then tested in the anti‐tumor screen of the National Cancer Institute (Bethesda, USA) with 60 human cancer cell lines. Growth inhibition values GI₅₀ in the one‐digit micromolar, and in one case in the nanomolar range were obtained. The effects show selectivities for certain types of cancer cells and for certain cell lines within these types; the screen includes leukemia, non‐small‐cell lung, colon, and central‐nervous‐system (CNS) cancer, melanoma, ovarian, renal, prostate, and breast cancer cell lines. The synthesis and full characterization of two new cyclo‐β‐peptides, (β³‐HSer(OBn))₃ ( 11 ) and (β³‐HMet)₃ ( 12 ) are described. Other cyclo‐ β‐peptides included in this investigation are (β‐Asp(Bn))₃ ( 13 ), (β‐HGlu(Bn))₃ ( 14 ), and (β‐HAla)₃ ( 16 ), compounds which had been previously prepared by us. Strongest activities were measured with the cyclo‐β‐peptides bearing benzyl‐ester or benzyl‐ether groups in the side chains. The cytotoxic activity of the compounds included in this investigation is much lower (LC₅₀>100 μM ) than their antiproliferative activity (GI₅₀).     

Di‐μ‐sulfido‐bis[diaqua(18‐crown‐6)­barium(II)]–saccharin (1/2)

The mol­ecule of the title compound {systematic name: di‐μ‐sulfido‐bis[di­aqua(1,4,7,10,13,16‐hexaoxa­cyclo­octade­cane‐κ⁶O)barium(II)] bis­[1,2‐benzisothiazol‐3(2H)‐one 1,1‐dioxide]}, [Ba₂S₂(C₁₂H₂₄O₆)₂(H₂O)₄](C₇H₅NO₃S)₂, lies on an inversion centre. The Ba^II atom encapsulated by the 18‐crown‐6 ring is coordinated by the six O atoms of the crown, two water O atoms and two bridging S atoms. The four‐membered ring composed of the Ba^II atoms and the bridging S atoms makes a dihedral angle of 67.1 (1)° with the crown‐ether ring. The aromatic ring system of the saccharin moiety is essentially planar. The packing is built up from layers of the mol­ecules and is stabilized by three intermolecular O—H?O hydrogen bonds.     

2‐Ethylsulfanyl‐7‐(furan‐2‐yl)‐4‐(thiophen‐2‐yl)pyrazolo[1,5‐a][1,3,5]triazine: π‐stacked chains of hydrogen‐bonded R22(10) dimers

In the title compound, C₁₅H₁₂N₄OS₂, the bond distances in the fused heterocyclic system show evidence for aromatic‐type delocalization in the pyrazole ring with some bond fixation in the triazine ring. The thiophenyl substituent is slightly disordered over two sets of atomic sites having occupancies of 0.934 (4) and 0.066 (4). The non‐H atoms in the entire molecule are nearly coplanar, with the planes of the furanyl substituent and the major orientation of the thiophenyl substituent making dihedral angles of 5.72 (17) and 1.8 (3)°, respectively, with that of the fused ring system. Molecules are linked into centrosymmetric R₂²(10) dimers by C—H...O hydrogen bonds and these dimers are further linked into chains by a single π–π stacking interaction. Comparisons are made with some related 4,7‐diaryl‐2‐(ethylsulfanyl)pyrazolo[1,5‐a][1,3,5]triazines which contain variously substituted aryl groups in place of the furanyl and thiophenyl substituents in the title compound.     

3‐Benzyl‐2‐(4‐fluorophenyl)‐1,3‐thiazolidin‐4‐one

The title compound, C₁₆H₁₄FNOS, crystallizes with Z′ = 2 in the space group P2₁/c. In one of the two independent molecules, the heterocyclic ring is effectively planar, but in the other molecule this ring adopts an envelope conformation. The molecules are weakly linked by two C—H...O hydrogen bonds to form C₂²(14) chains. Comparisons are made with some symmetrically substituted 2‐aryl‐3‐benzyl‐1,3‐thiazolidin‐4‐ones.     

Tri­carbonyl(η6‐chloro­benzene)­chromium

The title compound, [Cr(C₆H₅Cl)(CO)₃], is the first group 6 tri­carbonyl ­η⁶‐monohaloarene compound to be structurally characterized. It adopts a classic piano‐stool structure, with the Cr(CO)₃ tripod assuming a syn‐eclipsed conformation relative to the arene ring (ϕ = 2.0°). The extended structure is dominated by intermolecular π⃛H interactions (H⃛ring centroid = 2.94 Å) and non‐classical hydrogen bonds between carbonyl and arene moieties (O⃛H = 2.50–2.58 Å).     

Synthesis and Structure of the Clusters [Hg2(μ—SePh)2(SePh)2(PPh3)2] and [Hg3Br3(μ—SePh)3] · 2 DMSO

The compounds [Hg₂(μ—SePh)₂(SePh)₂(PPh₃)₂] ( I ) and [Hg₃Br₃(μ—SePh)₃] · 2 DMSO ( II ) are formed by reactions of [Hg(SePh)₂] with PPh₃ in THF( I ) or with HgBr₂ in DMSO ( II ) at room temperature. X—ray crystallography reveals that the cluster I consists of a distorted square built by each two Hg and Se atoms. The Hg atoms have almost tetrahedral co‐ordination environments formed by selenium atoms of two (μ‐^—SePh) ligands and Se and P atoms of terminal ^—SePh and PPh₃ ligands. The compound II is a six‐membered ring with alternating Hg and Se atoms in the chair conformation. Two DMSO molecules occupy positions below and above the [Hg₃Se₃] ring with the oxygen atoms directed to the centre of the ring.     

Bis(μ‐hexa­methyl­enetetr­amine)­bis(aqua­di­bromo­cadmium)­di­aqua­di­bromo­cadmium dihydrate

The title compound, poly­[[di­aqua­di­bromo­cadmium‐μ‐(1,3,5,7‐tetra­aza­tri­cyclo[3.3.1.1^3,7]decane‐N¹:N⁵)‐aqua­cad­mium‐di‐μ‐bromo‐aqua­cadmium‐μ‐(1,3,5,7‐tetra­aza­tri­cyclo[3.3.1.1^3,7]decane‐N¹:N⁵)‐di‐μ‐bromo] dihydrate], [Cd₃­Br₆­(C₆­H₁₂­N₄)₂­(H₂O)₄]·­2H₂O, is made up of two‐dimensional neutral rectangular coordination layers. Each rectangular subunit is enclosed by a pair of Cd₃(μ₂‐Br)₆(H₂O)₃ fragments and a pair of (μ₂‐hmt)Cd(H₂O)₂Br₂(μ₂‐hmt) fragments as sides (hmt is hexa­methyl­enetetr­amine). The unique Cd^II atom in the Cd₂Br₂ ring in the Cd₃(μ₂‐Br)₆(H₂O)₃ fragment is in a slightly distorted octahedral CdNOBr₄ geometry, surrounded by one hmt ligand [2.433 (5) Å], one aqua ligand [2.273 (4) Å] and four Br atoms [2.6409 (11)–3.0270 (14) Å]. The Cd^II atom in the (μ₂‐hmt)Cd(H₂O)₂Br₂(μ₂‐hmt) fragment lies on an inversion center and is in a highly distorted octahedral CdN₂O₂Br₂ geometry, surrounded by two trans‐related N atoms of two hmt ligands [2.479 (5) Å], two trans‐related aqua ligands [2.294 (4) Å] and two trans‐related Br atoms [2.6755 (12) Å]. Adjacent two‐dimensional coordination sheets are connected into a three‐dimensional network by hydrogen bonds involving lattice water mol­ecules, and the aqua, bromo and hmt ligands belonging to different layers.     

2,9‐Bis(3‐nitrophenyl)‐1‐azaadamantan‐4‐one

The title compound, 2,9‐bis(3‐nitro­phenyl)‐1‐aza­tri­cyclo[3.3.1.1^3,7]­decan‐4‐one, C₂₁H₁₉N₃O₅, has a tricyclic structure. The torsion angles may be used to describe the relationship of the carbonyl group to the adjacent faces, whereby it is seen that the angles on the face of the aryl­piperidinone side [122.0 (3) and ?122.0 (3)°] are greater than those on the cyclo­hexanone side [?119.8 (4) and 119.9 (4)°]. Although these differences may explain a facial selectivity during nucleophilic addition to the carbonyl group, the presence of the aryl rings is probably also important.     

Methyl 2,3‐dideoxy‐2‐S‐methylmercurio‐2‐thio‐β‐d‐manno‐oct‐2‐ulo­pyranosonate‐(2,6)

The hexo­pyran­osyl ring of the title compound, [Hg(CH₃)(C₉H₁₅O₇S)], adopts the ⁴C₁ chair conformation, and the anomeric configuration of the thio­methyl­mercury linkage is β. The compound exists as two symmetry‐independent conformers, A and B, within the unit cell, and each shows an almost linear S—Hg—C arrangement. Most of the bond distances and angles in A and B are similar, although a marked difference exists in the side‐chain conformation. Weak secondary intramolecular (between Hg and ring O) and intermolecular (between A and B conformers) interactions are documented.     

Synthesis of 4‐(trihalomethyl)dipyrimidin‐2‐ylamines from β‐alkoxy‐α,β‐unsaturated trihalomethyl ketones

The synthesis of a novel series of twelve 4‐(trihalomethyl)dipyrimidin‐2‐ylamines, from the cyclo‐condensation reaction of 4‐(trichloromethyl)‐2‐guanidinopyrimidine, with β‐alkoxyvinyl trihalomethyl ketones, of general formula: X₃C‐C(O)‐C(R²)=C(R¹)‐OR, where: X = F, Cl; R = Me, Et, ‐(CH₂)₂‐, ‐(CH₂)₃‐; R¹ = H, Me; R² = H, Me, ‐(CH₂)₂‐, ‐(CH₂)₃‐, is reported. The reactions were carried out in acetonitrile under reflux for 16 hours, leading to the dipyrimidin‐2‐ylamines in 65‐90% yield. Depending on the substituents of the vinyl ketone, tetrahydropyrimidines or aromatic pyrimidine rings were obtained from the cyclization reaction. When X = Cl, elimination of the trichloromethyl group was observed during the cyclization step. The structure of 4‐(trihalomethyl)dipyrimidin‐2‐ylamines was studied in detail by ¹H‐, ¹³C‐ and 2D‐nmr spectroscopy.     

Stabilization of the Pentazolate Anion in a Zeolitic Architecture with Na20N60 and Na24N60 Nanocages

The experimental detection and synthesis of pentazole (HN₅) and its anion (cyclo‐N₅^?) have been actively pursued for the past hundred years. The synthesis of an aesthetic three‐dimensional metal–pentazolate framework (denoted as MPF‐1) is presented. It consists of sodium ions and cyclo‐N₅^? anions in which the isolated cyclo‐N₅^? anions are preternaturally stabilized in this inorganic open framework featuring two types of nanocages (Na₂₀N₆₀ and Na₂₄N₆₀) through strong metal coordination bonds. The compound MPF‐1 is indefinitely stable at room temperature and exhibits high thermal stability relative to the reported cyclo‐N₅^? salts. This finding offers a new approach to create metal–pentazolate frameworks (MPFs) and enables the future exploration of interesting pentazole chemistry and also related functional materials.