Monolayer assemblies of a de novo designed 4-alpha-helix bundle carboprotein and its sulfur anchor fragment on Au(111) surfaces addressed by voltammetry and in situ scanning tunneling microscopy

Mapping and control of proteins and oligonucleotides on metallic and nonmetallic surfaces are important in many respects. Electrochemical techniques based on single-crystal electrodes and scanning probe microscopies directly in aqueous solution (in situ SPM) have recently opened perspectives for such mapping at a resolution that approaches the single-molecule level. De novo design of model proteins has evolved in parallel and holds promise for testing and controlling protein folding and for new tailored protein structural motifs. In this report we combine these two strategies. We present a scheme for the synthesis of a new 4-alpha-helix bundle carboprotein built on a galactopyranoside derivative with a thiol anchor aglycon suitable for surface immobilization on gold. The carboprotein with thiol anchor in monomeric and dimeric (disulfide) form, the thiol anchor alone, and a sulfur-free 4-alpha-helix bundle carboprotein without thiol anchor have been prepared and investigated for comparison. Cyclic and differential pulse voltammetry (DPV) of the proteins show desorption peaks around -750 mV (SCE), whereas the thiol anchor desorption peak is at -685 mV. The peaks are by far the highest for thiol monomeric 4-alpha-helix bundle carboprotein and the thiol anchor. This pattern is supported by capacitance data. The DPV and capacitance data for the thiolated 4-alpha-helix bundle carboproteins and the thiol anchor hold a strong Faradaic reductive desorption component as supported by X-ray photoelectron spectroscopy. The desorption peak of the sulfur-free 4-alpha-helix bundle carboprotein, however, also points to a capacitive component. In situ scanning tunneling microscopy (in situ STM) of the thiol anchor discloses an adlayer with small domains and single molecules ordered in pin-striped supramolecular structures. In situ STM of thiolated 4-alpha-helix bundle carboprotein monomer shows a dense monolayer in a broad potential range on the positive side of the desorption potential. The coverage decreases close to this potential and single-molecule structures become apparent. The in situ STM contrast is also strengthened, indicative of a new redox-based tunneling mechanism. The data overall suggest that single-molecule mapping of natural and synthetic proteins on well-characterized surfaces by electrochemistry and in situ STM is within reach.     

Monolayers of a de novo designed 4-alpha-helix bundle carboprotein and partial structures on Au(111)-surfaces

Mapping of structure and function of proteins adsorbed on solid surfaces is important in many contexts. Electrochemical techniques based on single-crystal metal surfaces and in situ scanning probe microscopies (SPM) have recently opened new perspectives for mapping at the single-molecule level. De novo design of model proteins has evolved in parallel and holds promise for test and control of protein folding and for new tailored protein structural motifs. These two strategies are combined in the present report.We present a synthetic scheme for a new 4-alpha-helix bundle carboprotein built on a galactopyranoside derivative with a thiol anchor aglycon suitable for surface immobilization on gold. The galactopyranoside with thiol anchor and the thiol anchor alone were prepared for comparison. Voltammetry of the three molecules on Au(111) showed reductive desorption peaks caused by monolayer adsorption via thiolate-Au bonding. In situ STM of the thiol anchor disclosed an ordered adlayer with clear domains and molecular features. This holds promise, broadly for single-molecule voltammetry and the SPM and scanning tunnelling microscopy (STM) of natural and synthetic proteins.     

Mixed adlayer of alkanethiol and peptide on GaAs(100): quantitative characterization by X-ray photoelectron spectroscopy

Homogeneous and mixed adlayers composed of an alkanethiol (1-octadecanethiol, ODT) and a peptide (CGISYGRKKRRQRRR) on GaAs(100) were formed in two different solvent systems: phosphate-buffered saline (PBS) and N,N-dimethylformamide (DMF). The chemical composition of each adlayer was characterized by X-ray photoelectron spectroscopy (XPS). The data showed that the makeup of the adlayer and its stability largely depends on the solvent used. Angle-resolved XPS also revealed that the adlayer thickness and tilt angles were different from values obtained from ellipsometry measurements and vastly varied between the two solvents used. The coverage data extracted from the XPS measurements indicated that homogeneous adlayers of peptide in PBS buffer form a multilayered film. Homogeneous alkanethiol adlayers exhibited monolayer coverage under all solvent treatments. Coadsorbed layers containing both alkanethiol and peptide have fractional monolayer coverage in both solvents.     

Assembled monolayers of Mo3S4(4+) clusters on well-defined surfaces

A class of inorganic monolayers formed by assembling the molybdenum-sulfur cluster, Mo3S4(4+), onto a well-defined Au(111) surface is presented. The monolayers have been comprehensively characterized by electrochemistry, X-ray photoelectron spectroscopy (XPS), and in situ scanning tunneling microscopy (in situ STM). The voltammetric data show strong reductive and oxidative desorption signals from Au-S interactions, supported by the presence of both S and Mo signals in XPS. In situ STM shows many small pits in the dense adlayers uniformly spread over the surface, which is a typical feature of self-assembled monolayers (SAMs) of alkanethiols. The density of the pits is ca. 23 (+/-5)% and is significantly higher than for straight-chain alkanethiol SAMs with a single -SH group. The pit shapes are irregular, suggesting multiple Au-S interactions from Mo3S4(4+). High resolution images disclose bright round spots of ca. 8 A diameter representing individual molecules in the SAM. This is the first example of in situ monolayer formation by a metal-chalcogenide cluster directly anchored onto the gold surface through core ligands and offers a simple way to prepare a new class of functionalized inorganic monolayers.     

Adsorption and thermal decomposition of 2-octylthieno[3,4-b]thiophene on Au(111)

The adsorption and thermal stability of 2-octylthieno[3,4-b]thiophene (OTTP) on the Au(111) surfaces have been studied using scanning tunneling microscopy (STM), temperature programmed desorption (TPD), and X-ray photoelectron spectroscopy (XPS). UHV-STM studies revealed that the vapor-deposited OTTP on Au(111) generated disordered adlayers with monolayer thickness even at saturation coverage. XPS and TPD studies indicated that OTTP molecules on Au(111) are stable up to 450K and further heating of the sample resulted in thermal decomposition to produce H(2) and H(2)S via C-S bond scission in the thieno-thiophene rings. Dehydrogenation continues to occur above 600K and the molecules were ultimately transformed to carbon clusters at 900K. Highly resolved air-STM images showed that OTTP adlayers on Au(111) prepared from solution are composed of a well-ordered and low-coverage phase where the molecules lie flat on the surface, which can be assigned as a (9×2√33)R5° structure. Finally, based on analysis of STM, TPD, and XPS results, we propose a thermal decomposition mechanism of OTTP on Au(111) as a function of annealing temperature.     

Light-induced structural transformation in self-assembled monolayer of 4-(amyloxy)cinnamic acid investigated with scanning tunneling microscopy

UV light irradiation effect on the structural transformation in a self-assembled monolayer of 4-(amyloxy)cinnamic acid (AOCA) on Au(111) has been investigated by using electrochemical scanning tunneling microscopy (ECSTM), cyclic voltammetry, and infrared (IR) spectroscopy. A well-defined 4-(amyloxy)cinnamic acid adlayer with a (4 x 11) symmetry was first prepared on Au(111). After UV-light irradiation onto the adlayer, a new adlayer is observed with different molecular arrangement and a symmetry of (5 x 8). On the basis of the results from high-resolution STM image and photochemical reaction, a dimerizaion of AOCA molecules in the adlayer with structural transformation is concluded. Schematic models have been proposed for the unirradiated and irradiated adlayers, respectively. The direct evidence at molecular level about photodimerization of cinnamic acid on metal substrate is presented.     

Nanopatterning of donor/acceptor hybrid supramolecular architectures on highly oriented pyrolytic graphite: a scanning tunneling microscopy study

Hybrid supramolecular architectures have been fabricated with acceptor 1,4-bis(4-pyridylethynyl)-2,3-bis-dodecyloxy-benzene (PBP) and donor 2,6-bis(3,4,5-tris-dodecyloxy-phenyl)dithieno[3,2-b:2',3'-d]thiophene (DTT) compounds on highly oriented pyrolytic graphite (HOPG) surfaces, and their structures and molecular conductance are characterized by scanning tunneling microscopy/spectroscopy (STM/STS). Stable, one-component adlayers of PBP and DTT are also investigated. The coadsorption of two-component mixtures of PBP and DTT results in a variety of hybrid nanopattern architectures that differ from those of their respective one-component surface assemblies. Adjusting the acceptor/donor molar ratio in mixed adlayer assemblies results in dramatic changes in the structure of the hybrid nanopatterns. STS measurements indicate that the HOMO and LUMO energy levels of PBP and DTT on an HOPG surface are relatively insensitive to changes in the hybrid supramolecular architectures. These results provide important insight into the design and fabrication of two-dimensional hybrid supramolecular architectures.     

Fabrication of self-assembled monolayers exhibiting a thiol-terminated surface

We compare two different strategies for fabricating self-assembled monolayers (SAMs) exhibiting a thiol-terminated organic surface, which recently has attracted considerable interest with regard to the binding of metal, and in particular gold particles, to these organic surfaces. Results obtained by IR spectroscopy and scanning tunneling microscopy (STM) reveal that the straightforward approach, namely, using the corresponding organodithiols, typically leads to the formation of disordered, ill-defined surfaces. We demonstrate that high-quality organothiolate adlayers exhibiting an SH-terminated surface can be prepared using dithiols where one of the thiol groups is protected by a thioester group. After formation of the organothiolate adlayer, the protecting group can be removed by immersion into NaOH solution. IR spectra recorded for the deprotected organothiolate adlayer reveal the presence of a highly oriented organothiolate adlayer.     

Scanning tunneling microscopy and spectroscopy studies of 4-methyl- 4'-(n-mercaptoalkyl)biphenyls on Au(111)-(1x1).

4-methyl-4'-(n-mercaptoalkyl)biphenyl (CH3-C6H4-C6H4-(CH2)n-SH, n=3-6, BPn) monolayers assembled on Au(111)-(1x1) in 1,3,5,-trimethylbenzene (TMB) at various temperatures are studied by scanning tunneling microscopy (STM) and scanning tunneling spectroscopy (STS). High resolution STM images reveal that BP3 and BP5 form a (sqrt 3x2sqrt 3) repeating motif superimposed on a temperature-dependent Moire pattern. BP4 and BP6 adlayers are characterized by a coexisting (2sqrt 3x5sqrt 3) majority phase and a temperature-dependent (3xpsqrt 3) minority phase. Assembly at 60 degrees C or 90 degrees C leads to p=5. Compression of the adlayer was found at higher temperatures. Combined with high-resolution structure experiments, the electronic characteristics of BP3 and BP4 self-assembled monolayers (SAMs) were studied by monitoring current-distance (iT-Deltaz) and current-voltage (iT-Ebias) characteristics in TMB employing a gold STM tip|BPn|Au(111)-(1x1) configuration. The semilogarithmic (iT-Deltaz) plots yielded three linear regions in the range 10 pA相似文献   

Electrodeposition of Au monolayer on Pt(111) mediated by self-assembled monolayers

In-situ scanning tunneling microscopy (STM), cyclic voltammetry (CV), and infrared reflection-adsorption spectroscopy (IRRAS) have been used to examine the electrodeposition of gold onto Pt(111) electrodes modified with benzenethiol (BT) and benzene-1,2-dithiol (BDT) in 0.1 M HClO4 containing 10 microM HAuCl4. Both BT and BDT were attached to Pt(111) via one sulfur headgroup. STM and IRRAS results indicated that the other SH group of BDT was pendant in the electrolyte. Both BT and BDT formed (2 x 2) structures at the coverage of 0.25, and they were transformed into (square root(3) x square root(3))R30 degrees as the coverage was raised to 0.33. These two organic surface modifiers resulted in 3D and 2D gold islands at BT- and BDT-coated Pt(111) electrodes, respectively. The pendant SH group of BDT could interact specifically with gold adspecies to immobilize gold adatoms on the Pt(111) substrate, which yields a 2D growth of gold deposition. Molecular resolution STM revealed an ordered array of (6 x 2 square root(13)) after a full monolayer of gold was plated on the BDT/Pt(111) electrode. Since BDT was strongly adsorbed on Pt(111), gold adatoms only occupied free sites between BDT admolecules on Pt(111). This is supported by a stripping voltammetric analysis, which reveals no reductive desorption of BDT admolecules at a gold-deposited BDT/Pt(111) electrode. It seems that the BDT adlayer acted as the template for gold deposit on Pt(111). In contrast, a BT adlayer yielded 3D gold deposit on Pt(111). This study demonstrates unambiguously that organic surface modifiers could contribute greatly to the electrodeposition of metal adatoms.     

Highly ordered adlayers of three calix[4]arene derivatives on Au(1 1 1) surface in HClO4 solution: in situ STM study

Highly ordered adlayers of three calix[4]arene derivatives have been prepared on Au(1 1 1) surface in HClO₄ solution. The adlayer structures are characterized by in situ scanning tunneling microscopy (STM). High-resolution STM images reveal the molecular orientation and packing arrangement in the ordered adlayers. All the molecules are upright on Au(1 1 1) surface in pinched cone conformation. The structural difference of these molecules is proposed to be from the different functional groups at the upper and lower positions. The structural models are tentatively proposed for three ordered adlayers.     

Adlayers of C60-C60 and C60-C70 fullerene dimers formed on au(111) in benzene solutions studied by STM and LEED

Scanning tunneling microscopy (STM) and low-energy electron diffraction were used to reveal the structures of ordered adlayers of [2+2]-type C60-C60 fullerene dimer (C120) and C60-C70 cross-dimer (C130) formed on Au(111) by immersingit in abenzene solution containing C120 or C130 molecules. High-resolution STM images clearly showed the packing arrangements and the electronic structures of C120 and C130 on the Au(111) surface in ultrahigh vacuum. The (2 square root3 x 4square root3)R30 degrees, (2square root3 x 5square root3)R30 degrees, and (7 x 7) structures were found for the C120 adlayer on the Au(111) surface, whereas C130 molecules were closely packed on the surface. Each C60 or C70 monomer cage was discerned in the STM image of a C130 molecule.     

Luminescence from 3,4,9,10-perylenetetracarboxylic dianhydride on Ag(111) surface excited by tunneling electrons in scanning tunneling microscopy

The electronic excitations induced with tunneling electrons into adlayers of 3,4,9,10-perylenetetracarboxylic dianhydride (PTCDA) on Ag(111) have been investigated by in situ fluorescence spectroscopy in scanning tunneling microscopy (STM). A minute area of the surface is excited by an electron tunneling process in STM. Fluorescence spectra strongly depend on the coverage of PTCDA on Ag(111). The adsorption of the first PTCDA layer quenches the intrinsic surface plasmon originated from the clean Ag(111). When the second layer is formed, fluorescence spectra are dominated by the signals from PTCDA, which are interpreted as the radiative decay from the manifold of first singlet excited state (S(1)) of adsorbed PTCDA. The fluorescence of PTCDA is independent of the bias polarity. In addition, the fluorescence excitation spectrum agrees with that by optical excitation. Both results indicate that S(1) is directly excited by the inelastic impact scattering of electrons tunneling within the PTCDA adlayer.     

ToF-SIMS analysis of poly(l-lysine)-graft-poly(2-methyl-2-oxazoline) ultrathin adlayers

Understanding of the interfacial chemistry of ultrathin polymeric adlayers is fundamentally important in the context of establishing quantitative design rules for the fabrication of nonfouling surfaces in various applications such as biomaterials and medical devices. In this study, seven poly(l-lysine)-graft-poly(2-methyl-2-oxazoline) (PLL–PMOXA) copolymers with grafting density (number of PMOXA chains per lysine residue) 0.09, 0.14, 0.19, 0.33, 0.43, 0.56, and 0.77, respectively, were synthesized and characterized by means of nuclear magnetic resonance spectroscopy (NMR). The copolymers were then adsorbed on Nb₂O₅ surfaces. Optical waveguide lightmode spectroscopy method was used to monitor the surface adsorption in situ of these copolymers and provide information on adlayer masses that were then converted into PLL and PMOXA surface densities. To investigate the relationship between copolymer bulk architecture (as shown by NMR data) and surface coverage as well as surface architecture, time-of-flight secondary ion mass spectrometry (ToF-SIMS) analysis was performed. Furthermore, ToF-SIMS method combined with principal component analysis (PCA) was used to verify the protein resistant properties of PLL–PMOXA adlayers, by thorough characterization before and after adlayer exposure to human serum. ToF-SIMS analysis revealed that the chemical composition as well as the architecture of the different PLL–PMOXA adlayers indeed reflects the copolymer bulk composition. ToF-SIMS results also indicated a heterogeneous surface coverage of PLL–PMOXA adlayers with high grafting densities higher than 0.33. In the case of protein resistant surface, PCA results showed clear differences between protein resistant and nonprotein-resistant surfaces. Therefore, ToF-SIMS results combined with PCA confirmed that the PLL–PMOXA adlayer with brush architecture resists protein adsorption. However, low increases of some amino acid signals in ToF-SIMS spectra were detected after the adlayer has been exposed to human serum.

In situ stress and nanogravimetric measurements during underpotential deposition of bismuth on (111)-textured Au

The surface stress associated with the underpotential deposition (upd) of bismuth on (111)-textured Au is examined, using the wafer curvature method, in acidic perchlorate and nitrate supporting electrolyte. The surface stress is correlated to Bi coverage by independent nanogravimetric measurements using an electrochemical quartz crystal nanobalance. The mass increase measured in the presence of perchlorate is consistent with the (2 x 2) and (p x square root 3)-2Bi adlayers reported in the literature. ClO(4)(-) does not play a significant role in the upd process. The complete Bi monolayer causes an overall surface stress change of about -1.4 N m(-1). We attribute this compressive stress to the formation of Bi-Au bonds which partially satisfy the bonding requirements of the Au surface atoms, thereby reducing the tensile surface stress inherent to the clean Au surface. At higher Bi coverage, an additional contribution to the compressive stress is due to the electrocompression of the (p x square root 3)-2Bi adlayer. In nitric acid electrolyte, NO(3)(-) coadsorbs with Bi over the entire upd region but has little fundamental impact on adlayer structure and stress.     

Time-dependent organization and wettability of decanethiol self-assembled monolayer on Au(111) investigated with STM

A detailed study on the time-dependent organization of a decanethiol self-assembled monolayer (SAM) at a designed solution concentration onto a Au(111) surface has been performed with scanning tunneling microscopy (STM). The SAMs were prepared by immersing Au(111) into an ethanol solution containing 1 microM decanethiol with different immersion times. STM images revealed the formation process and adlayer structure of the SAMs. It was found that the molecules self-organized into adlayers from random separation to a well-defined structure. From 10 s, small domains with ordered molecular organization appeared, although random molecules could be observed on Au(111) at the very initial stage. At 30 s, the SAM consisted of uniform short stripes. Each stripe consisted of sets of decanethiol mainly containing eight molecules. With the immersion time increasing, the length of the stripes increased. At 5 min, the alkyl chains overlapped each other between the adjacent stripes, indicating the start of a stacked process. After immersing Au(111) in decanethiol solution for 3 days, a densely packed adlayer with a (radical 3 x radical 3)R30 degrees structure was observed. The formation process and structure of decanethiol SAMs are well related to sample preparation conditions. The wettability of the decanethiolate SAM-modified Au(111) surface was also investigated.     

Adlayer of hydroquinone on Pt(111) in solution and in a vacuum studied by STM and LEED

Hydroquinone (HQ) adlayers were formed on Pt(111) in HF solution and in a vacuum. By using scanning tunneling microscopy (STM) in solution, it was revealed that HQ formed an ordered structure on Pt(111) with a strong attractive interaction between two adjacent hydroxyl groups in neighboring HQ molecules. After the sample was transferred into a vacuum, low-energy electron diffraction (LEED) measurement was performed, which showed that the (2.56 x 2.56)R16 degrees incommensurate structure of the HQ adlayer was formed in solution. The HQ adlayer on Pt(111) was formed also by vapor deposition, and the identical (2.56 x 2.56)R16 degrees adlayer structure was found by LEED and STM in a vacuum.     

Coexistence of multiple conformations in cysteamine monolayers on Au(111)

The structural organization, catalytic function, and electronic properties of cysteamine monolayers on Au(111) have been addressed comprehensively by voltammetry, in situ scanning tunneling microscopy (STM) in anaerobic environment, and a priori molecular dynamics (MD) simulation and STM image simulation. Two sets of voltammetric signals are observed. One peak at -(0.65-0.70) V (SCE) is caused by reductive desorption of cysteamine. The other signal, at -(0.25-0.40) V consists of a peak doublet. The pH dependence of the latter suggests that the origin is catalytic dihydrogen evolution. The doublet feature is indicative of two distinct cysteamine configurations. Cysteamine monolayer formation from initial nucleation to a highly ordered phase has been successfully observed in real time using oxygen-free in situ STM. Random cellular patterns, disordered adlayer formation accompanied by high step edge mobility, and ultimately a highly ordered (square root 3 x 4) R30 degrees lattice are observed sequentially. Pits are formed due to enclosure of the mobile edges during the adsorption process. In the highly ordered cysteamine layer, each unit has two spots with apparent 0.6 A height difference in STM images. The coverage 5.7 +/- 0.1 x 10(-10) mol cm(-2) determined by voltammetry supports that the spots represent two individual cysteamine molecules. A priori MD and density functional simulations hold other clues to the image interpretation and indicate that the NH(3)(+) groups dominate the tunneling contrast. A wide range of interface structures, showing variations in the sulfur binding site and orientation, gauche and trans conformers, and especially hydrogen-bonding interactions, are examined, from which it is concluded that the adsorbate structure is controlled by interactions with the solvent rather than with the substrate.     

STM investigation of the photoisomerization of an azobis-(benzo-15-crown-5) molecule and its self-assembly on Au(111)

Scanning tunneling microscopy (STM) has been employed to investigate the photoisomerization of azobis-(benzo-15-crown-5) on Au(111). A self-assembled monolayer of azobis-(benzo-15-crown-5) with a (3 x 7) symmetry was observed on Au(111). After ex-situ UV-light irradiation, a new adlayer structure with a different molecular arrangement could be seen on Au(111), although the domain size of the ordered packing is small. On the basis of a high-resolution STM image and photochemical reaction result, schematic models have been proposed for the original and ex-situ irradiated adlayers. After in-situ UV-light irradiation, the ordered arrays disappeared and many bright clusters emerged at domain boundaries. The results presented here provide direct evidence at the molecular level for a photochemical reaction.     

Combined theoretical and experimental study on the adsorption of methanol on the ZnO(1010) surface

The structure, dynamics, and energetics of methanol adlayers on the nonpolar ZnO(1010) surface have been studied by He-atom diffraction (HAS), high-resolution electron energy loss spectroscopy (HREELS), thermal desorption spectroscopy (TDS), and density functional calculations. The experimental and theoretical data consistently show that at temperatures below 357 K methanol forms an ordered adlayer with a (2 × 1) periodicity and a coverage of one monolayer in which half of the methanol molecules are dissociated. The ordering of the methanol molecules is governed by repulsive interactions between the methyl groups of the methanol molecules. This repulsive interaction is also responsible for the formation of a second, low-density phase at higher temperatures with half monolayer coverage of undissociated methanol which is stable up to 440 K.