Reaction of diazonium salts with transition metals : IX. Reaction of vinyltrimethylsilane with arenediazonium tetrafluoroborates under palladium(0) catalysis

Arenediazonium tetrafluoroborates (ArN₂BF₄ where Ar=Ph, 4-MeC₆H₄, 4-BrC₆H₄, 4-IC₆H₄ and 4-NO₂C₆H₄) reacted easily with CH₂=CHSiMe₃ at 25 δC to give ArCH=CH₂, (E-ArCH=CHSiMe₃ and Ar(Me₃Si)C=CH₂ in excellent yields under palladium(O) catalysis. (E)-ArCH=CHSiMe₃ compounds were obtained predominantly and isolated in good yields by using an excess of CH₂=CHSiMe₃ over ArN₂BF₄. Protodesilylation of the reaction mixture afforded styrene derivatives.     

Synthesis and reactions of 4-vinyl pyridine derivatives of ruthenium(II)

4-Vinyl pyridine (4-Vp) reacts with RuHClCO(PPh₃)₃ (I) in THF to give RuHClCO(PPh₃)₂(4-Vp) (II, which reacts with sodium derivatives of bidentate chelating ligands to afford substitution products, [RuH(CO)(PPh₃)₂(L)]. The bindentate ligands used are 2-hydroxybenzaldehyde, 2-hydroxy-3-methoxybenzaldehyde, trifluorothenoylacetone and 8-hydroxyquinoline. Insertion reactions of the Ru---H bond of II with activated olefins such as acrylonitrile [giving RuCl(CO)(CH₃CHCN)(PPh₃)₂(4-Vp)], 2-vinyl pyridine, dimethyl fumarate and monobromodiethyl fumarate have been carried out to obtain chelated Ru---C bonded complexes. RuCl₂(PPh₃)₃ reacts with an excess of 4-Vp to give an octahedral ruthenium addition complex containing two vinyl pyridine ligands. The dimer [RuClCO(CH₃CHCN)(PPh₃)(4-Vp)]₂ is obtained by the reaction of [RuClCO(CH₃CHCN)(PPh₃)₂]₂ with an excess of 4-Vp. Stereochemical assignments have been made for these new complexes on the basis of IR and ¹H NMR data.     

Synthesis of methyltrioxorhenium(VII) arylamine complexes and mono- and bis(ortho)-chelated arylaminorhenium(VII) trioxides

From the reaction of MeReO₃ with the neutral arylamine C₆H₅CH₂NMe₂ and the aryldiamine C₆H₄(CH₂NMe₂)₂−1,3, have been isolated in good yields the 1/1 adduct complex [MeReO₃ · C₆H₅CH₂NMe₂], 1, and the 2/1 adduct complex [(MeReO₃)₂ · C₆H₄(CH₂NMe₂)₂− 1,3], 2, respectively. The X-ray molecular structure of 2 shows that both rhenium centres have a trigonal bipyramidal geometry and in the axial positions of each rhenium centre are one of the NMe₂ units of the aryldiamine ligand and a methyl group. The mono(ortho)-chelated arylaminorhenium trioxide complex [ReO₃(C₆H₄CH₂NMe₂−2], 3, can be synthesized by a transmetallation reaction of ClReO₃ with [ZnC₆H₄CH₂NMe₂−2₂] in a 2:1 molar ratio. In a similar way the bis(ortho)-chelated arylaminorhenium trioxide complex [ReO₃C₆H₃(CH₂NMe₂)₂−2,6], 4, can be synthesized by addition of a mixture of [Li₂C₆H₃(CH₂NMe₂)₂−2,6₂] and ZnCl₂ to ClReO₃. Complexes 3 and 4 have been isolated as white solids in 66% and 81% yields respectively. The rhenium centre in complex 4 has a bicapped tetrahedral geometry in which the monoanionic C₆H₃(CH₂NMe₂)₂−2,6⁻ ligand is pseudo-facially bonded with a characteristic N1-Re-N2 angle of 107.7(3)°, a Re-C_ipso bond length of 2.112(11) Å and Re-N1 and Re-N2 bond lengths of 2.518(9) Å and 2.480(8) Å respectively.     

Mehrfachbindungen zwischen Hauptgruppenelementen und Übergangsmetallen : XLIV. Synthesen von Hydrogensulfido- und Hydrogenselenido-Komplexen der Metalle Chrom, Molybdän und Wolfram

Hydrogenchalcogenido complexes of general composition (η⁵-C₅R₅)(CO)₃M(EH) (R = H, CH₃; M = Cr, Mo, W; E = S, Se) can be obtained by three different routes, sometimes in quite good yields. Thus, the sulfur and selenium derivatives can be synthesized by insertion of the respective elements into the metal-hydrogen bonds of the precursor compounds (η⁵-C₅R₅)(CO)₃MH. This species also reacts with potassium selenocyanate to yield the hydrogenselenido derivatives (η⁵-C₅R₅)(CO)₃M(SeH) which can also be obtained by treatment of the methyl complexes (η⁵-C₅R₅)(CO)₃M(CH₃ (M = Mo, W) with HBF₄ and Li[SeH]. The corresponding hydrogentellurido compounds are probably formed by these preparative methods but appear to be quickly converted into either the dinuclear tellurium bridge products (μ-Te)[(η⁵-C₅R₅)(CO)₃M]₂ (M = Mo) or into the hydrido complexes (η⁵-C₅R₅)(CO)₃MH (M= Mo, W) by release of elemental tellurium.     

Rhodium(I) complexes of β-diketonates and related ligands as hydrosilylation catalysts

The complexes (O---O)Rh(CH₂CH₂)₂ ((O---OH) = FcC(O)CH₂C(O)CH₃, PhC(O)CH₂C(O)CH₃, 1,2-(CH₃CO)(OH)C₆H₄, 3-benzoyl-(+)-camphor) are catalysts for the hydrosilylation of PhMeCO with Ph₂SiH₂. The optical yield from the reaction catalyzed by the camphor derivative is too low to measure. Only low optical yields (max 8.7% e.e.) are obtained from the same reaction by using similar in situ catalysts with ligands prepared from (+)-PhCH(Me)NH₂. Bases such as H⁻ and PhCH(Me)NH⁻ catalyze the hydrosilylation reaction in the absence of rhodium salts, but only low optical yields are obtained. Ph₂SiH₂ reacts with 2-cyclohexen-1-one under these conditions and the mode of reaction depends on the reaction conditions.     

β-硝基苯乙烯衍生物与二溴海因高度区域选择性氨溴加成反应

以β-硝基苯乙烯衍生物为底物, 二溴海因为氮源/卤素源, 乙腈作溶剂, 建立了碳碳双键上高度区域选择性氨溴加成反应新体系. β-硝基苯乙烯衍生物与二溴海因在室温无水碳酸钠催化下反应, 可高收率获得邻位氨溴加成产物, 最高收率达97%; β-甲基-β-硝基苯乙烯衍生物在氢氧化钾催化下回流反应, 也可高收率得到邻位氨溴加成产物, 最高收率达95%. 实验结果表明, 对于硝基苯乙烯衍生物, 当苯环4-位具有强供电子基团如CH₃O时, 可以得到单一的α-氨基-β-溴加成产物, 但其收率相对较低; 当硝基苯乙烯衍生物的苯环4-位有强吸电子基团如NO₂时, 反应收率则很高. 这一实验结果证明β-硝基苯乙烯衍生物(缺电子烯烃)与二溴海因的氨溴加成反应具有亲核加成的特征. 本文共考察了20种不同结构的β-硝基苯乙烯衍生物的氨溴加成反应情况, 其产物结构经核磁共振波谱及质谱分析确证, 并提出了可能的反应机理.     

Interaction of half-sandwich alkylmolybdenum(III) complexes with B(C6F5)3. The X-ray structure of [CpMo(η-C4H6)(μ-Cl)(μ-CH2)(O)MoCp][CH3B(C6F5)3]

The reactions of the half-sandwich molybdenum(III) complexes CpMo(η⁴-C₄H₄R₂)(CH₃)₂, where Cp=η⁵-C₅H₅ and R=H or CH₃, with equimolar amounts of B(C₆F₅)₃ have been investigated in toluene. EPR monitoring shows the formation of an addition product which does not readily react with Lewis bases such as ethylene, pyridine, or PMe₃. The analysis of the EPR properties and the X-ray structure of a decomposition product obtained from dichloromethane, [CpMo(η⁴-C₄H₆)(μ-Cl)(μ-CH₂)(O)MoCp][CH₃B(C₆F₅)₃], indicate that the borane attack has occurred at the methyl position.     

Synthesis, characterization of new Rh---Co mixed-metal clusters and reactions of clusters containing [Rh2Co2C2] core with 1-alkynes and/or carbon monoxide

Six new cluster derivatives [Rh₂Co₂(CO)₆(μ-CO)₄(μ₄,η²-HCCR)] (R=FeCp₂ 1, CH₂OH 2, (CH₃O)C₁₀H₆CH(CH₃)COOCH₂CCH 3) and [RhCo₃(CO)₆(μ-CO)₄(μ₄,η²-HCCR)] (R=FeCp₂ 4, CH₂OH 5, (CH₃O)C₁₀H₆CH(CH₃)COOCH₂CCH 6) were obtained by the reactions of [Rh₂Co₂(CO)₁₂] and [RhCo₃(CO)₁₂] with substituted 1-alkyne ligands HCCR [R=FeCp₂ 7, CH₂OH 8, (CH₃O)C₁₀H₆CH(CH₃) COOCH₂CCH 9] in n-hexane at room temperature, respectively. Alkynes insert into the Co---Co bond of the tetranuclear clusters to give butterfly clusters. [Rh₂Co₂(CO)₆(μ-CO)₄(μ₄,η²-HCCFeCp₂)] (1) was characterized by a single-crystal X-ray diffraction analysis. Reactions of 1, 2 with 7, 8 and ambient pressure of carbon monoxide at 25 °C gave two known cluster complexes [Co₂(CO)₆(μ₂, η²-HCCR)] (R=FeCp₂ 10, CH₂OH 11), respectively. All clusters were characterized by element analysis, IR and ¹H-NMR spectroscopy.     

New organogold(I) complexes: Synthesis, structure, and dynamic behavior of the polynuclear organogold diphenylmethane and diphenylethane derivatives

Two organogold derivatives of diphenylmethane and diphenylethane, Ph₃PAu(o-C₆H₄)CH₂(C₆H₄-o)AuPPh₃ (1) and Ph₃PAu(o-C₆H₄)(CH₂)₂(C₆H₄-o)AuPPh₃ (2), have been synthesized by the reaction of ClAuPPh₃ with Li(o-C₆H₄)CH₂(C₆H₄-o)Li and Li(o-C₆H₄)(CH₂)₂(C₆H₄-o)Li respectively. The interaction of 1 with dppe results in the replacement of the two PPh₃ groups to give a macrocyclic compound (3) that includes an Au Au bond. Compounds 1 and 2 react with one or two equivalents of [Ph₃PAu]BF₄ to form new types of cationic complex [CH₂(C₆H₄-o)₂(AuPPh₃)₃]BF₄ (4), [CH₂(C₆H₄-o)₂(AuPPh₃)₄](BF₄)₂ (5), and [(CH₂)₂(C₆H₄-o)₂(AuPPh₃)₄](BF₄)₂ (6). Complexes 1–6 have been characterized by X-ray diffraction studies, FAB MS, and IR as well as by ¹H and ³¹P NMR spectroscopy. A complicated system of Au H-C agostic interactions, involving the bridging alkyl groups (—CH₂— and CH₂-CH₂—) of diphenylmethane and diphenylethane ligands, has been found to occur in complexes 1–3 and 6.     

非对称Schiff碱过渡金属配合物模拟酶催化烯烃环氧化(Ⅰ)

研究了温和条件下以亚碘酰苯为氧源,非对称性的和对称性的Mn(Ⅲ)Schiff碱配合物[Mn(Ⅲ)(CBP－phen－Xsal)Cl,X=H,Cl,Br,NO₂,CH₃,OCH₃]和[Mn(Ⅲ)(CBP－R－CBP)Y,R=CH₂CH₂－,－CH(CH₃)CH₂－,－C₆H₄－;Y=Cl,OCH₃]催化非官能性烯烃苯乙烯、环己烯和α-甲基苯乙烯的环氧化反应.结果表明,非对称配合物Mn(Ⅲ)(CBP－phen－Xsal)Cl是一个良好的催化非官能性烯烃环氧化反应的催化剂体系;中心金属离子Mn(Ⅲ)的电子结合能越小,催化环氧化效果越好;对上述3种烯烃环氧化物最好收率分别达到73％、100％和92％.     

Chemie polyfunktioneller moleküle : LXXXVII. Synthese und reaktionsverhalten von 4-methyl-1,2,6-tristiba-tricyclo[2.2.1.0]heptan (Sb3-nortricyclan) gegenüber chrom-, molybdän- und wolframhexacarbonyl

The reaction of CH₃C(CH₂Cl)₃ and NaSb(C₆H₅)₂ in liquid ammonia leads to Sb₂(C₆H₅)₄ (I). Using CH₃C(CH₂Br)₃ instead of CH₃C(CH₂Cl)₃ results in the formation of I and CH₃C[CH₂Sb(C₆H₅)₂]₃ (II). Treatment of II with gaseous HCl in dry CH₂Cl₂ yields CH₃C(CH₂SbCl₂)₃ (III) under elimination of benzene. The reduction of III with Na in THF gives the first all-cis-organocyclotristibane (Sb₃-nortricyclane) CH₃C(CH₂Sb)₃ (IV) which forms the new CH₃C(CH₂Sb)₃M(CO)₅ complexes (Va---Vc) with M(CO)₅THF (M = Cr, Mo, W).     

相转移催化下4-氯苯磺酰基乙酸异丙酯的烷基化反应

在有机合成中可用芳磺酰基作暂时性活化基团。芳磺酰基乙酸酯是具有活性亚甲基的弱酸性化合物。通常要在氢化钠、醇钠存在下才能起烷基化反应。Ono等曾报道4-甲苯磺酰基乙酸甲酯在DBu存在下进行烷基化反应,但反应时间长。近年来,相转移催化在有机反应中的应用受到重视,然而用固液相转移催化法使芳磺酰基乙酸酯起烷基化反应还未见报道。我们在K₂CO₃/DMF体系中,用TEBA作催化剂,研究了4-氯苯磺酰基乙酸异丙酯与不同类型卤代烃所起的烷基化反应。合成了尚未见报道的一或二烷基化产物。     

Catalytic activity of manganese(III)-oxazoline complexes in urea hydrogen peroxide epoxidation of olefins: The effect of axial ligands

The catalytic activity of two manganese(III)-oxazoline complexes [Mn(phox)₂(CH₃OH)₂]ClO₄ and Mn(phox)₃ (Hphox = 2-(2′-hydroxylphenyl)oxazoline), was studied in the epoxidation of various olefins. All of epoxidation reactions were carried out in (1:1) mixture of methanol:dichloromethane at room temperature using urea hydrogen peroxide (UHP) as oxidant and imidazole as co-catalyst. The epoxide yields clearly demonstrate the influence of steric and electronic properties of olefins, the catalysts and nitrogenous bases as axial ligand. [Mn(phox)₂(CH₃OH)₂]ClO₄ catalyst with low steric properties has higher catalytic activity than Mn(phox)₃. The highest epoxide yield (95%) was achieved for indene at the presence of [Mn(phox)₂(CH₃OH)₂]ClO₄ within 5 min. The proximal and distal interactions of strong π-donor axial ligands such as imidazole with the active intermediate are efficiently increased activity of the catalytic system.     

Density functional study of molecular properties of hydrazoic acid and methyl azide

Density functional calculations for hydrazoic acid HN₃ and methyl azide CH₃N₃ and for the respective singly ionized structures HN⁺₃ and CH₃N⁺₃ are reported. An analysis of the electrostatic solvent effects, based on the self-consistent reaction field approach, on the molecular properties and conformational equilibrium of CH₃N₃ is also reported. The results are sensitive to the basis set quality and show some dependence on the different representations for the exchange-correlation functions. For HN₃ very good agreement with experiment is observed for several properties, such as the geometry, dipole moment, vibrational frequencies and for the adiabatic first ionization energy. For CH₃N₃ the energy difference between eclipsed (ec) and staggered (st) conformers (δ_ec-st) is 2.5 kJ mol⁻¹, in good agreement with the experimental value (2.9 kJ mol⁻¹). However, for CH₃N⁺₃, δ_ec-st is −3.2 kJ mol⁻, reflecting a significant modification of the methyl group rotational potential after ionization. Solvent effects on the molecular properties of CH₃N₃ are important when it is solvated in a polar medium. The most significant modifications concern the dipole moment and the frequencies related to the CH₃ symmetric stretch and torsion vibrational modes.     

Synthesis and characterization of Na5[Co(CO)3(P{(CH2)nC6H4-P-SO3}3)2], n = 1, 2, 3, and 6. Novel zwitterion

The electron donating water soluble phosphines, P{(CH₂)nC₆H₄-p-SO₃Na}₃,n = 1, 2, 3 and 6, react rapidly with Co₂(CO)₈ under two phase reaction conditions to yield the disproportionation products, [Co(CO)₃(P{(CH₂)nC₆H₄-p-SO₃Na₃}₂] [Co(CO)₄]. Selective precipitation yields the formally zwitterionic complex anions as the sodium salt, [Co(CO)₃(P{(CH₂)nC₆H₄-p-SO₃} ₃)₂]⁵⁻. The anions can be used as precursors to water soluble cobalt hydroformylation catalysts under two phase and supported aqueous phase conditions. The tendency to form alcohol products is low with these complexes. The behavior of the catalysts is consistent with an active species that remains water soluble during the reaction and is not leached into the nonaqueous phase.     

Reactivity of niobocene dihalogenides toward nitroso derivatives. EPR and IR characterization of the first niobium(IV) complexes containing an ArNO-N,O ligand

The reaction of [Nb(η⁵-C₅H₄R)₂X₂] [1: R = SiMe₃, X = Cl; 2: R = SiMe₃, X = Br; 3: R = H, X = Cl; 4: R =^t, X = Cl] with nitroso derivatives ArNO [a: Ar = Ph; b: Ar = o-CH₃-C₃H₄; c: Ar = p-(CH₃)₂NC₆H₄] yields paramagnetic complexes formulated as [Nb(η⁵-C₅H₄R)(η³-C₅H₄R)X₂(ArNO-N,O) 1a, 1b, 1c, 2a, 3a, 4a and 4c, which have been characterized by ESR and IR spectroscopy.     

A new homobimetallic arenediyl diplatinum(II) unit as building block for macromolecular synthesis. X-ray crystal structure of [C6H2{CH2NMe2}2-1,5-{PtCl(PPh3)}2-2,4]

Treatment of the diaminobenzene [C₆H₄{CH₂NMe₂}₂-1,3] (NCN-H, 1) with one or two equivalents of cis-PtCl₂(DMSO)₂ leads to exclusive formation of the doubly cycloplatinated species [C₆H₄{CH₂NMe₂}₂-1,5-{PtCl(DMSO)}₂-2,4] (3), which upon addition of triphenylphosphine yields the bisphosphine adduct [C₆H₄{CH₂NMe₂}₂-1,5-{PtCl(PPh₃)}₂-2,4] (4). The X-ray molecular structure of 4 revealed the presence of highly distorted square planar Pt(II) centers which is caused by close proximity of the two phosphine donor ligands. Complexes of type 3 can be regarded as suitable starting materials for the directional build-up of larger macromolecular structures.     

Reactions of biscyclopentadienylnickel with lithium and magnesium aryls

The reaction of nickelocene with phenyllithium, ortho-, meta- and para-methylphenylmagnesium bromide, and 2-((dimethylamino)methyl) phenyllithium are studied. It was found that unstable compounds {CpNiC₆H₄R} (R = H, o-, m-, p-CH₃) are formed in those reactions. For R = CH₂N(CH₃)₂, a stable compound, CpNiC₆H₄CH₂N(CH₃)₂, is formed due to intramolecular coordination. In other cases, mainly coupling reactions occur and biphenyl, bitolyl and higher coupling products are formed. Compound (CpNiC₆H₄R) is also formed as a product of thermal decomposition of Cp{η²⁻ C₂H₄)NiC₆H₄R. It reacts further to form the same products as above. The mechanism of the coupling reactions is proposed and discussed.     

Tautomeric and conformational stabilities of methylphosphonic dicyanide, methoxydicyanophosphine, and their isocyano analogs: an ab initio calculation

The relative energies and structural parameters of the equilibrium forms and the potential functions of internal rotation of methylphosphonic dicyanide, CH₃(=O)(CN)₂, methoxydicyanophosphine, CH₃OP(CN)₂, and their isocyano analogs, CH₃P(=O)(NC)₂ and CH₃OP(NC)₂, have been calculated at the RHF/6-31G* level. The total energy of the more stable oxo forms CH₃P(=O)(CN)₂ and CH₃P(=O)(NC)₂ are 10–20 kcal mol⁻¹ lower than the energies of the aci forms CH₃OP(CN)₂ and CH₃OP(NC)₂. The relative stabilities of the cyano and isocyano isomers are almost the same in the case of the oxo forms, but for the aci forms the energies of the cyano isomers are 8 kcal mol⁻¹ lower than those of the isocyano isomers. The potential curves for internal rotation in the aci forms are characterized by a deep minimum corresponding to the trans arrangement of the methyl group and the lone pair of electrons on the phosphorus atom. Two less pronounced minima are symmetrically situated with respect to relative maximum corresponding to the transition cis form. The potential curves of internal rotation in the oxo form possess three minima corresponding to staggered configurations of the methyl group and phosphorus atom bonds. The energy characteristics and geometrical parameters of the studied molecules are compared with known data for similar compounds.     

ansa-Metallocene derivatives XXXIII. 2-Dimethylamino-substituted bis-indenyl zirconium dichloride complexes with and without a dimethylsilyl bridge: syntheses, crystal structures and properties in propene polymerization catalysis

Bis(2-N,N-dimethylamino-indenyl) zirconium dichloride, (2-(CH₃)₂N-C₉H₆)₂ZrCl₂, and dimethylsilyl-bridged bis(2-N,N-dimethylamino-indenyl) zirconium dichloride, (CH₃)₂Si(2-(CH₃)₂N-C₉H₅)₂ZrCl₂, were prepared by reaction of the corresponding ligand lithium salts with ZrCl₄ in toluene. Diffractometric structure determinations reveal C₂-symmetric complex geometries for both complexes. An increased electron density at the Zr center of the dimethylamino-substituted complexes is indicated by reduction potentials which are 0.3–0.4 V more negative than those of their unsubstituted analogs. When activated with methyl aluminoxane in toluene solution, (CH₃)₂Si(2-(CH₃)₂N-C₉H₅)₂ZrCl₂ catalyzes the polymerization of propene to polymers with a microstructure comparable with that of polymers produced with other Me₂Si-bridged bis(indenyl)ZrCl₂ complexes, but with a substantially increased fraction of i-propyl end groups derived from alkyl exchange between Zr-polymer and Al---Me species.