Study of multipole contributions to the structure of water around ions in solution using the soft sticky dipole-quadrupole-octupole (SSDQO) model of water

The solvation of ions in the soft sticky dipole-quadrupole-octupole (SSDQO) model for liquid water is presented here. This new potential energy function for liquid water describes water-water interactions by a Lennard-Jones term plus a sticky potential consisting of an approximate moment expansion with point dipole, quadrupole, and octupole moments. The SSDQO potential energy function using the moments from extended simple point charge (SPC/E), TIP3P, or TIP5P reproduces the pair potential energy functions and radial distribution functions of the respective multipoint model but it is much faster than even the three-point models. Here, the solvation of ions in SSDQO water is studied using ion-water potential energy functions consisting of moment expansions up to the charge-quadrupole term, up to the charge-octupole term, and up to an approximate charge-hexadecapole term using the moments of SPC/E water. The radial distributions from Monte Carlo simulations show the best agreement with the results for ions in SPC/E water for the expansion up to the charge-hexadecapole term. Thus, the best results are obtained when the water-water and ion-water potentials are exact up to the 1r(4) term and also contain an approximate 1r(5) term. Overall, the simplicity, efficiency, and accuracy of the SSDQO potential make it potentially very useful for computer simulations of aqueous solvation.     

Soft sticky dipole-quadrupole-octupole potential energy function for liquid water: an approximate moment expansion

A new, efficient potential energy function for liquid water is presented here. The new model, which is referred here as the soft sticky dipole-quadrupole-octupole (SSDQO) model, describes a water molecule as a Lennard-Jones sphere with point dipole, quadrupole, and octupole moments. It is a single-point model and resembles the hard-sphere sticky dipole potential model for water by Bratko et al. [J. Chem. Phys. 83, 6367 (1985)] and the soft sticky dipole model by Ichiye and Liu [J. Phys. Chem. 100, 2723 (1996)] except now the sticky potential consists of an approximate moment expansion for the dimer interaction potential, which is much faster than the true moment expansion. The object here is to demonstrate that the SSDQO potential energy function can accurately mimic the potential energy function of a multipoint model using the moments of that model. First, the SSDQO potential energy function using the dipole, quadruple, and octupole moments from SPC/E, TIP3P, or TIP5P is shown to reproduce the dimer potential energy functions of the respective multipoint model. In addition, in Monte Carlo simulations of the pure liquid at room temperature, SSDQO reproduces radial distribution functions of the respective model. However, the Monte Carlo simulations using the SSDQO model are about three times faster than those using the three-point models and the long-range interactions decay faster for SSDQO (1/r(3) and faster) than for multipoint models (1/r). Moreover, the contribution of each moment to the energetics and other properties can be determined. Overall, the simplicity, efficiency, and accuracy of the SSDQO potential energy function make it potentially very useful for studies of aqueous solvation by computer simulations.     

UNDERSTANDING STRUCTURAL EFFECTS OF MULTIPOLE MOMENTS ON AQUEOUS SOLVATION OF IONS USING THE SOFT-STICKY DIPOLE-QUADRUPOLE-OCTUPOLE WATER MODEL

The effects of water multipole moments on the aqueous solvation of ions were determined in Monte Carlo simulations using soft-sticky dipole-quadrupole-octupole (SSDQO) water. Water molecules formed linear hydrogen bonds to Cl(-) using the new SSDQO1 parameters, similar to multi-site models. However, the dipole vector was tilted rather than parallel to the oxygen-Na(+) internuclear vector as in most multi-site model, while experiment and ab initio molecular dynamics simulations generally indicate a range of values between tilted and parallel. By varying the multipoles in SSDQO, the octupole was found to determine the orientation around Na(+). Moreover, analysis of the multipoles of more conventional models is predictive of their performance as solvents.     

Solvation of Glucose, Trehalose, and Sucrose by the Soft Sticky Dipole-Quadrupole-Octupole Water Model

Water structure around sugars modeled by partial charges is compared for soft-sticky dipole-quadrupole-octupole (SSDQO), a fast single-site multipole model, and commonly used multi-site models in Monte Carlo simulations. Radial distribution functions and coordination numbers of all the models indicate similar hydration by hydrogen-bond donor and acceptor waters. However, the new optimized SSDQO1 parameters as well as TIP4P-Ew and TIP5P predict a "lone-pair" orientation for the water accepting the sugar hydroxyl hydrogen bond that is more consistent with the limited experimental data than the "dipole" orientation in SPC/E, which has important implications for studies of the cryoprotectant properties of sugars.     

Dipole moments of water molecules confined in Na–LSX zeolites – Molecular dynamics simulations including polarization of water

Molecular dynamics simulations of hydrated Na–LSX zeolite at 300 K were performed with the explicit inclusion of the polarization of water. The Si/Al ratio of LSX is 1 and the number of water molecules per unit cell ranged from 0 to 224 to represent a range of hydration. The calculation results show that the dipole moments of water molecules increase with increasing hydration. By using the SPC–FQ water model instead of the SPC/E water model, the differential heat of adsorption showed similar trends in both models, whereas the differential potential energies between water–water and between water–zeolite are more sensitive to hydration.     

Molecular dynamics simulation of the dielectric constant of water: the effect of bond flexibility

The role of bond flexibility on the dielectric constant of water is investigated via molecular dynamics simulations using a flexible intermolecular potential SPC/Fw [Y. Wu, H. L. Tepper, and G. A. Voth, J. Chem. Phys. 128, 024503 (2006)]. Dielectric constants and densities are reported for the liquid phase at temperatures of 298.15 K and 473.15 K and the supercritical phase at 673.15 K for pressures between 0.1 MPa and 200 MPa. Comparison with both experimental data and other rigid bond intermolecular potentials indicates that introducing bond flexibility significantly improves the prediction of both dielectric constants and pressure-temperature-density behavior. In some cases, the predicted densities and dielectric constants almost exactly coincide with experimental data. The results are analyzed in terms of dipole moments, quadrupole moments, and equilibrium bond angles and lengths. It appears that bond flexibility allows the molecular dipole and quadrupole moment to change with the thermodynamic state point, and thereby mimic the change of the intermolecular interactions in response to the local environment.     

An accurate and simple quantum model for liquid water

The path-integral molecular dynamics and centroid molecular dynamics methods have been applied to investigate the behavior of liquid water at ambient conditions starting from a recently developed simple point charge/flexible (SPC/Fw) model. Several quantum structural, thermodynamic, and dynamical properties have been computed and compared to the corresponding classical values, as well as to the available experimental data. The path-integral molecular dynamics simulations show that the inclusion of quantum effects results in a less structured liquid with a reduced amount of hydrogen bonding in comparison to its classical analog. The nuclear quantization also leads to a smaller dielectric constant and a larger diffusion coefficient relative to the corresponding classical values. Collective and single molecule time correlation functions show a faster decay than their classical counterparts. Good agreement with the experimental measurements in the low-frequency region is obtained for the quantum infrared spectrum, which also shows a higher intensity and a redshift relative to its classical analog. A modification of the original parametrization of the SPC/Fw model is suggested and tested in order to construct an accurate quantum model, called q-SPC/Fw, for liquid water. The quantum results for several thermodynamic and dynamical properties computed with the new model are shown to be in a significantly better agreement with the experimental data. Finally, a force-matching approach was applied to the q-SPC/Fw model to derive an effective quantum force field for liquid water in which the effects due to the nuclear quantization are explicitly distinguished from those due to the underlying molecular interactions. Thermodynamic and dynamical properties computed using standard classical simulations with this effective quantum potential are found in excellent agreement with those obtained from significantly more computationally demanding full centroid molecular dynamics simulations. The present results suggest that the inclusion of nuclear quantum effects into an empirical model for water enhances the ability of such model to faithfully represent experimental data, presumably through an increased ability of the model itself to capture realistic physical effects.     

Effects of hydrogen-bond environment on single particle and pair dynamics in liquid water

We have performed molecular dynamics simulations of liquid water at 298 and 258 K to investigate the effects of hydrogen-bond environment on various single-particle and pair dynamical properties of water molecules at ambient and supercooled conditions. The water molecules are modelled by the extended simple point charge (SPC/E) model. We first calculate the distribution of hydrogen-bond environment in liquid water at both temperatures and then investigate how the self-diffusion and orientational relaxation of a single water molecule and also the relative diffusion and relaxation of the hydrogen-bond of a water pair depend on the nature of the hydrogen-bond environment of the tagged molecules. We find that the various dynamical quantities depend significantly on the hydrogen-bond environment, especially at the supercooled temperature. The present study provides a molecular-level insight into the dynamics of liquid water under ambient and supercooled conditions.     

Solubility of methane in water: the significance of the methane-water interaction potential

The influence of the methane-water interaction potential on the value of the Henry constant obtained from molecular dynamics simulations was investigated. The SPC, SPC/E, MSPC/E, and TIP3P potentials were used to describe water and the OPLS-UA and TraPPE potentials for methane. Nonbonding interactions between unlike atoms were calculated both with one of four mixing rules and with our new methane-water interaction potential. The Henry constants obtained from simulations using any of the mixing rules differed significantly from the experimental ones. Good agreement between simulation and experiment was achieved with the new potential over the whole temperature range.     

Structure and dynamics of liquid water with different long-range interaction truncation and temperature control methods in molecular dynamics simulations

We have used molecular dynamics simulations to study the physical properties of modified TIP3P water model included in the CHARMM program, using four different methods-the Ewald summation technique, and three different spherical truncation methods-for the treatment of the long-range interactions. Both the structure and dynamics of the liquid water model were affected by the methods used to truncate the long-range interactions. For some of the methods artificial structuring of the model liquid was observed around the cutoff radius. The model liquid properties were also affected by the commonly applied temperature control methods. Four different methods for controlling the temperature of the system were studied, and the effects of these methods on the bulk properties for liquid water were analyzed. The system size was also found to change the dynamics of the model liquid water. Two control simulations with the SPC/E water model were carried out. The self-diffusion coefficient (D), the radial distribution function (g(OO)), the distance dependent Kirkwood G-factor [G(k)(r)] and the intermolecular potential energy (E(pot)) were determined from the different trajectories and compared with the experimental data.     

Molecular dynamics simulation of liquid water: hybrid density functionals

The structure, dynamical, and electronic properties of liquid water utilizing different hybrid density functionals were tested within the plane wave framework of first-principles molecular dynamics simulations. The computational approach, which employs modified functionals with short-ranged Hartree-Fock exchange, was first tested in calculations of the structural and bonding properties of the water dimer and cyclic water trimer. Liquid water simulations were performed at the state point of 350 K at the experimental density. Simulations included three different hybrid functionals, a meta-functional, four gradient-corrected functionals, and the local density and Hartree-Fock approximations. It is found that hybrid functionals are superior in reproducing the experimental structure and dynamical properties as measured by the radial distribution function and self-diffusion constant when compared to the pure density functionals. The local density and Hartree-Fock approximations show strongly over- and understructured liquids, respectively. Hydrogen bond analysis shows that the hybrid functionals give slightly smaller average numbers of hydrogen bonds than pure density functionals but similar hydrogen bond populations. The average molecular dipole moments in the liquid from the three hybrid functionals are lower than those of the corresponding pure density functionals.     

Accounting for electronic polarization in non-polarizable force fields

The issues of electronic polarizability in molecular dynamics simulations are discussed. We argue that the charges of ionized groups in proteins, and charges of ions in conventional non-polarizable force fields such as CHARMM, AMBER, GROMOS, etc should be scaled by a factor about 0.7. Our model explains why a neglect of electronic solvation energy, which typically amounts to about a half of total solvation energy, in non-polarizable simulations with un-scaled charges can produce a correct result; however, the correct solvation energy of ions does not guarantee the correctness of ion-ion pair interactions in many non-polarizable simulations. The inclusion of electronic screening for charged moieties is shown to result in significant changes in protein dynamics and can give rise to new qualitative results compared with the traditional non-polarizable force field simulations. The model also explains the striking difference between the value of water dipole μ～ 3D reported in recent ab initio and experimental studies with the value μ(eff)～ 2.3D typically used in the empirical potentials, such as TIP3P or SPC/E. It is shown that the effective dipole of water can be understood as a scaled value μ(eff) = μ/√ε(el), where ε(el) = 1.78 is the electronic (high-frequency) dielectric constant of water. This simple theoretical framework provides important insights into the nature of the effective parameters, which is crucial when the computational models of liquid water are used for simulations in different environments, such as proteins, or for interaction with solutes.     

Hydroxyl radical in aqueous solution: Computer simulation

Molecular dynamics simulations of hydroxyl radical in water are carried out by use of a classical simple point charge extended (SPC/E) water model and a similar point charge model for hydroxyl radical. Structural and dynamical properties are studied along the coexistence curve of SPC/E water at 298, 373, 473, 573, and 633 K and above its critical point at 683, 733, 783, and 833 K with density fixed at 0.3 g/cm3. Dramatic changes in the diffusion dynamics of water and hydroxyl radical near the critical point are related to the reorganization of the three-dimensional structure of water around hydroxyl radical, as revealed by the study of the spatial distribution functions. This study helps us understand the kinetics of oxidation reactions in high-temperature water.     

A computational investigation of thermodynamics, structure, dynamics and solvation behavior in modified water models

We investigate the properties of geometrically modified water models by performing molecular dynamics simulations of perturbations of the extended simple point charge (SPC/E) model of water over a wide range of temperatures at 1 bar. The geometric modification consists of altering the H-O-H angle in SPC/E. The dipole moment is held constant by altering the O-H bond length, while the electrostatic charges are left unchanged. We find that a H-O-H angle of at least 100 degrees is necessary for the appearance of density anomalies and of solubility extrema with respect to temperature for small apolar solutes. We observe the occurrence of two incompatible types of structural order in these models: Tetrahedral, with waterlike translational order for bent models with H-O-H angles in excess of 100 degrees ; and linear, with Lennard-Jones-like orientationally averaged translational order for smaller H-O-H angles. Increasing the H-O-H angle causes the density to increase, while at the same time shifting waterlike anomalies to progressively higher temperatures. For bent models with H-O-H angle greater than SPC/E's, we observe arrest of translational motion at 300 K (115 degrees) and 330 K (120 degrees).     

Structural and dynamical properties of the Hg2+ aqua ion: a molecular dynamics study

Molecular dynamics simulations of the Hg2+ ion in aqueous solution have been carried out using an effective two-body potential derived from quantum mechanical calculations. A stable heptacoordinated structure of the Hg2+ first hydration shell has been observed and confirmed by extended X-ray absorption fine structure (EXAFS) experimental data. The structural properties of the Hg2+ hydration shells have been investigated using radial and angular distribution functions, while the dynamical behavior has been discussed in terms of reorientational correlation functions, mean residence times of water molecules in the first and second hydration shells, and self-diffusion coefficients. The effect of water-water interactions on the Hg2+ hydration properties has been evaluated using the SPC/E and TIP5P water models.     

Combined electronic structure/molecular dynamics approach for ultrafast infrared spectroscopy of dilute HOD in liquid H2O and D2O

We present a new approach that combines electronic structure methods and molecular dynamics simulations to investigate the infrared spectroscopy of condensed phase systems. This approach is applied to the OH stretch band of dilute HOD in liquid D2O and the OD stretch band of dilute HOD in liquid H2O for two commonly employed models of water, TIP4P and SPC/E. Ab initio OH and OD anharmonic transition frequencies are calculated for 100 HOD x (D2O)n and HOD x(H2O)n (n = 4-9) clusters randomly selected from liquid water simulations. A linear empirical relationship between the ab initio frequencies and the component of the electric field from the solvent along the bond of interest is developed. This relationship is used in a molecular dynamics simulation to compute frequency fluctuation time-correlation functions and infrared absorption line shapes. The normalized frequency fluctuation time-correlation functions are in good agreement with the results of previous theoretical approaches. Their long-time decay times are 0.5 ps for the TIP4P model and 0.9 ps for the SPC/E model, both of which appear to be somewhat too fast compared to recent experiments. The calculated line shapes are in good agreement with experiment, and improve upon the results of previous theoretical approaches. The methods presented are simple, and transferable to more complicated systems.     

Assessment of biomolecular force fields for molecular dynamics simulations in a protein crystal

Different biomolecular force fields (OPLS‐AA, AMBER03, and GROMOS96) in conjunction with SPC, SPC/E and TIP3P water models are assessed for molecular dynamics simulations in a tetragonal lysozyme crystal. The root mean square deviations for the C_a atoms of lysozymes are about 0.1 to 0.2 nm from OPLS‐AA and AMBER03, smaller than 0.4 nm from GROMOS96. All force fields exhibit similar pattern in B‐factors, whereas OPLS‐AA and AMBER03 accurately reproduce experimental measurements. Despite slight variations, the primary secondary structures are well conserved using different force fields. Water diffusion in the crystal is approximately ten‐fold slower than in bulk phase. The directional and average water diffusivities from OPLS‐AA and AMBER03 along with SPC/E model match fairly well with experimental data. Compared to GROMOS96, OPLS‐AA and AMBER03 predict larger hydrophilic solvent‐accessible surface area of lysozyme, more hydrogen bonds between lysozyme and water, and higher percentage of water in hydration shell. SPC, SPC/E and TIP3P water models have similar performance in most energetic and structural properties, but SPC/E outperforms in water diffusion. While all force fields overestimate the mobility and electrical conductivity of NaCl, a combination of OPLS‐AA for lysozyme and the Kirkwood‐Buff model for ions is superior to others. As attributed to the steric restraints and surface interactions, the mobility and conductivity in the crystal are reduced by one to two orders of magnitude from aqueous solution. © 2009 Wiley Periodicals, Inc. J Comput Chem, 2010     

Conformational simulations of aqueous solvated alpha-conotoxin GI and its single disulfide analogues using a polarizable force field model

The solution conformation of alpha-conotoxin GI and its two single disulfide analogues are simulated using a polarizable force field in combination with the molecular fragmentation quantum chemical calculation. The polarizability is explicitly described by allowing the partial charges and fragment dipole moments to be variables, with values coming from the linear-scaling energy-based molecular fragmentation calculations at the B3LYP/6-31G(d) level. In comparison with the full quantum chemical calculations, the fragmentation approaches can yield precise ground-state energies, dipole moments, and static polarizabilities for peptides. The B3LYP/6-31G(d) charges and fragment-centered dipole moments are introduced in calculations of electrostatic terms in both AmberFF03 and OPLS force fields. Our test calculations on the gas-phase glucagon (PDB code: 1gcn) and solvated alpha-conotoxin GI (PDB code: 1not) demonstrate that the present polarization model is capable of describing the structural properties (such as the relative conformational energies, intramolecular hydrogen bonds, and disulfide bonds) with accuracy comparable to some other polarizable force fields (ABEEM/MM and OPLS-PFF) and the quantum mechanics/molecular mechanics (QM/MM) hybrid model. The employment of fragment-centered dipole moments in calculations of dipole-dipole interactions can save computational time in comparison with those polarization models using atom-centered dipole moments without much loss of accuracy. The molecular dynamics simulations using the polarizable force field demonstrate that two single disulfide GI analogues are more flexible and less structured than the native alpha-conotoxin GI, in agreement with NMR experiments. The polarization effect is important in simulations of the folding/unfolding process of solvated proteins.