Preparation of micron-size monodisperse polymer particles by dispersion copolymerization of styrene with poly(2-oxazoline) macromonomer

This article describes the preparation of micron-size monodisperse polymer particles by dispersion copolymerization of styrene with a poly(2-oxazoline) macromonomer in an aqueous ethanol solution. The macromonomer acted as a comonomer as well as a stabilizer. The diameter of the particles increased as the concentration of the macromonomer decreased. The higher the molecular weight of the macromonomer, the smaller the particle size. The copolymerization in the solvent containing higher water content gave smaller polymer particles. Under the condition giving the monodisperse particles, the particles volume increased linearly with the yield of the particles. From ESCA analysis of the particle surface, poly(2-oxazoline) chains were enriched on the surface. © 1993 John Wiley & Sons, Inc.     

Synthesis of polymers in aqueous solutions: Polyaddition of bis(oxazolines) with dithiol in aqueous solutions

Polyaddition of bis(4-mercaptophenyl) sulfide ( BMPS ) with m-phenylenebis(2-oxazoline) ( MPBO ) proceeded very smoothly in the mixtures of aprotic ploar solvents such as N-methyl-2-pyrrolidone ( NMP ) with water to produce the corresponding poly(amide–sulfide) with high molecular weights at 90°C under nitrogen. The reaction of BMPS with MPBO , p-phenylenebis(2-oxazoline), and 1,4-butylenebis(2-oxazoline) was also examined in water under the same conditions, and it was found that the reaction proceeds successfully to give the corresponding poly(amide–sulfide)s with high molecular weights. These results mean that water along as well as the mixed solvents of aprotic polar solvents such as NMP with water can be uses as suitable reaction media for the polyaddition of bis(oxazolines) with dithiol to synthesize poly(amide—sulfide)s with high molecular weights. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35 : 2711–2717, 1997     

Preparation and properties of poly(alkyl vinyl ether-2-ethyl-2-oxazoline) diblock copolymers

A method for the synthesis of well-defined poly(alkyl vinyl ether–2-ethyl-2-oxazoline) diblock copolymers with hydrolytically stable block linkages has been developed. Monofunctional poly(alkyl vinyl ether) oligomers with nearly Poisson molecular weight distributions were prepared via a living cationic polymerization method using chloroethyl vinyl ether together with HI/ZnI₂ as the initiating system and lithium borohydride as the termination reagent. Using the resultant chloroethyl ether functional oligomers in combination with sodium iodide as macroinitiators, 2-ethyl-2-oxazoline was polymerized in chlorobenzene/NMP to afford diblock copolymers. A series of poly(methyl vinyl ether–2-ethyl-2-oxazoline) diblock materials were found to have polydispersities of ≈ 1.3–1.4 and are microphase separated as indicated by two T_g's in their DSC thermograms. These copolymers are presently being used as model materials to study fundamental parameters important for steric stabilization of dispersions in polar media. © 1993 John Wiley & Sons, Inc.     

Catalytic performance in 4-nitrophenol reduction by Ag nanoparticles stabilized on biodegradable amphiphilic copolymers

Biodegradable copolymers have received much more attention in the last decades due their potential applications in the fields related to environmental protection, medicine, agriculture, and the chemical processes. Silver nanoparticles (Ag NPs) were prepared via reduction of silver nitrate (AgNO₃) using biodegradable amphiphilic copolymers in aqueous solution. The micelles were constructed from the amphiphilic copolymer composed of poly(2-ethyl-2-oxazoline) and poly(ε-caprolactone). The Ag NPs with a diameter of 10–15?nm were found to show a comparable high catalytic activity toward the reduction of 4-nitrophenol (4-NP) in the presence of an excess amount of NaBH₄. The synthesized Ag NPs-loaded copolymer exhibits high catalytic activity for the reduction of 4-NP to 4-aminophenol.     

Versatility of hydrophilic and antifouling PVDF ultrafiltration membranes tailored with polyhexanide coated copper oxide nanoparticles

Hydrophilic poly(vinylidene fluoride) (PVDF) nanocomposite ultrafiltration (UF) membranes with excellent antifouling and antibiofouling characteristics are fabricated by employing polyhexanide coated copper oxide nanoparticles (P–CuO NPs). The presence of P–CuO NPs is played a significant role in altering the PVDF membrane matrix and probed by XRD, FTIR, FESEM and contact angle analysis. The PVDF/P–CuO nanocomposite membranes exhibited an outstanding antifouling performance indicated by the superior pure water flux, effective foulant separation and maximum flux recovery ratio during UF experiments as a result of the formation of the hydrophilic and more porous membrane due to the uniform distribution of P–CuO NPs. Particularly, the PVDF/P–CuO-3 membrane showed higher PWF of 152.5 ± 2.4 lm⁻²h⁻¹ and porosity of 64.5% whereas the lower contact angle of 52.5°. Further, it showed the higher rejection of 99.5 and 98.4% and the flux recovery ratio of 99.5 and 98.5% respectively for BSA and HA foulants, demonstrated its increased water permeation, foulant separation and antifouling behavior. Further, the decent antibacterial activity is showed by the PVDF/P–CuO nanocomposite membranes with the formation of halo-zone around the membrane when exposed to the bacterial medium demonstrated that, by this process an antibacterial water treatment membrane can be developed by simple phase inversion technique with good membrane stability.     

Micro-Raman investigations of PVDF-based proton-conducting membranes

Proton-conducting membranes of poly(vinylidene fluoride), PVDF, grafted with styrene and thereafter sulfonated, were investigated by Raman spectroscopy. The depth and surface distribution of polystyrene grafts and crosslinker, as well as the sulfonation efficiency, were determined by using confocal micro-Raman spectroscopy. Highly grafted samples show homogeneous distribution of grafted material and homogeneous sulfonation. Depth profiles reveal uneven graft distribution for samples with low and intermediate degrees of grafting. In crosslinked samples, the crosslinker concentration in the interior of the film is found to be roughly 50% of the surface concentration. In contrast to what has previously been reported, the sulfonation efficiency is poor at low graft levels and is further inhibited by the presence of divinyl benzene, DVB, as crosslinker. At degrees of grafting above ∼ 60%, the crosslinker does not affect the sulfonation efficiency and a level of 70–90% sulfonation is reached. The matrix polymer structure is found to be largely retained after irradiation, grafting, and sulfonation. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 3317–3327, 1999     

Amphiphilic silicones prepared from branched PEO‐silanes with siloxane tethers

Amphiphilic silicones were prepared by the covalent incorporation of branched polyethylene oxide (PEO) via a siloxane tether. This was achieved by using six novel branched PEO‐silanes with varying siloxane tether lengths and PEO molecular weight (M_n). Each PEO‐silane was crosslinked via acid‐catalyzed sol–gel condensation with α,ω‐bis(Si‐OH)polydimethylsiloxane (PDMS) (M_n = 3000 g/mol) to yield six amphiphilic silicone films. Film surface hydrophilicity increased with siloxane tether length, particularly after exposure to an aqueous environment, indicating that the PEO segments were more readily driven to the surface. This effect was more pronounced for films prepared with PEO‐silanes containing lower M_n PEO segments. AFM was used to study surface reconstruction of films upon exposure to an aqueous environment. Adsorption of bovine serum albumin (BSA) and human fibrinogen (HF) proteins decreased with siloxane tether length, particularly after first exposing films to an aqueous environment. For a given siloxane tether length, relatively less BSA adsorbed onto films prepared with PEO‐silanes with lower M_n PEO segments whereas less HF adsorbed onto films prepared with PEO‐silanes with higher M_n PEO segments. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 4108–4119, 2010     

Ultra-High to Ultra-Low Drug-Loaded Micelles: Probing Host–Guest Interactions by Fluorescence Spectroscopy

Polymer micelles are an attractive means to solubilize water insoluble compounds such as drugs. Drug loading, formulations stability and control over drug release are crucial factors for drug-loaded polymer micelles. The interactions between the polymeric host and the guest molecules are considered critical to control these factors but typically barely understood. Here, we compare two isomeric polymer micelles, one of which enables ultra-high curcumin loading exceeding 50 wt.%, while the other allows a drug loading of only 25 wt.%. In the low capacity micelles, steady-state fluorescence revealed a very unusual feature of curcumin fluorescence, a high energy emission at 510 nm. Time-resolved fluorescence upconversion showed that the fluorescence life time of the corresponding species is too short in the high-capacity micelles, preventing an observable emission in steady-state. Therefore, contrary to common perception, stronger interactions between host and guest can be detrimental to the drug loading in polymer micelles.     

Poly(ether imide) membranes modified with poly(ethylene imine) as potential carriers for epidermal substitutes

Poly(ether imide) (PEI) membranes were modified with a linear low-molecular weight (PETIM_0.6) and a branched high-molecular weight poly(ethylene imine) (PETIM_60). The membrane surfaces became more hydrophilic and the zeta potentials were shifted from negative to positive zeta values after immobilisation of both PETIM. These measurements also indicated the presence of a swollen surface layer in the case of PETIM_60, while a regular structuring of the surface was observed with scanning force microscopy for PETIM_0.6. A human keratinocyte cell line HaCaT was cultured on the different membranes. It was found that HaCaT cell growth was stimulated by PETIM_0.6. Cells reached earlier confluence on this substratum, while their growth was inhibited on a PEI membrane modified with PETIM_60, which makes PEI membranes modified with PETIM_0.6 a promising material for in vitro culture of epidermal transplants.     

Model Biological Membranes and Possibilities of Application of Electrochemical Impedance Spectroscopy for their Characterization

Biological membranes are essential parts of living systems. They represent an interface between intracellular and extracellular space. Depending on their structure, they often perform very complex functions and play an important role in the transport of both charged and uncharged particles in any organism. Structure of the biological membranes, which play very important role in electrochemical processes inside living organisms, is very complicated and still not precisely defined and explained. Model lipid membranes are used to gain detail information about properties of real biological membranes and about associated electrochemical processes. Electrochemistry, especially electrochemical impedance spectroscopy (EIS), can play a useful role in the characterization of properties of model lipid membranes (planar and supported lipid bilayers, tethered lipid membranes, liposomes, etc.). This review is focused on model biological membranes and the possibilities and limitations of electrochemical methods and namely of EIS in this field.     

Synthesis and emulsion copolymerization of amphiphilic poly(2-oxazoline) macromonomer possessing a vinyl ester group

The present article describes the synthesis and emulsion copolymerization of a block-type amphiphilic poly(2-oxazoline) macromonomer possessing a polymerizable vinyl ester group. The macromonomer was synthesized by one-pot two-stage block copolymerization of 2-oxazolines using vinyl iodoacetate as initiator. 2-Methyl- and 2-n-butyl-2-oxazolines were employed for the construction of hydrophilic and hydrophobic segments, respectively. The surface activities evaluated by the surface tension of the macromonomer in water were fairly good. Emulsion copolymerization of vinyl acetate with the macromonomer was carried out. The macromonomer acted as a polymeric surfactant, as well as a comonomer. The resulting copolymer latex particles were spherical and their diameter was in the sub-micron range. The effects of the composition of the macromonomer on the emulsion copolymerization and the resulting latex particles were examined. © 1993 John Wiley & Sons, Inc.     

Controlled sulfonation of poly(arylene ether sulfone)s and poly(arylene ether ketone)s with different molecular structures for polymer electrolyte membranes

Poly(arylene ether sulfone) copolymers derived from 9,9-bis(4-hydroxyphenyl)fluorene, bisphenol S and 4,4′-difluorodiphenylsulfone and poly(arylene ether ketone) copolymers derived from 4-phenoxybiphenyl, diphenyl ether and isophthaloyl chloride were prepared as precursor polymers for sulfonation reaction in which sulfonic groups are introduced quantitatively into specified positions. Sulfonation reaction for these two series of copolymers by concentrated sulfuric acid was successfully carried out to give sulfonated polymers with controlled positions and degree of sulfonation. Thermal stability, moisture absorption and proton conductivity for these two series of copolymers were measured and the results were compared to those of perfluorosulfonic acid polymers.     

基于聚(2-甲基-2-噁唑啉)和聚丙烯酸的混合刷在毛细管电泳在线富集溶菌酶中的应用

制备了一种对溶菌酶具有可控吸附性能的混合刷涂层毛细管,用于毛细管电泳在线富集溶菌酶以提高其检测灵敏度。首先,分别通过阳离子开环聚合和可逆加成-断裂链转移（RAFT）聚合合成聚（2-甲基-2-噁唑啉）（PMOXA）和聚丙烯酸（PAA）,然后将甲基丙烯酸缩水甘油酯（GMA）分别与PMOXA和PAA通过自由基共聚和RAFT聚合合成出聚（2-甲基-2-噁唑啉）-r-甲基丙烯酸缩水甘油酯（PMOXA-r-GMA）和聚丙烯酸-b-聚甲基丙烯酸缩水甘油酯（PAA-b-PGMA）。将PMOXA-r-GMA和PAA-b-PGMA的混合溶液以一定比例加入到毛细管内,通过加热即可制备出基于PMOXA和PAA的混合刷涂层毛细管。X射线光电子能谱（XPS）对毛细管原材料的表面组成研究结果表明,当混合溶液质量浓度为20 g/L、PMOXA-r-GMA和PAA-b-PGMA质量比为1：1时,所得涂层中羧基的含量随着PAA链长的增加而增加;异硫氰酸荧光素标记溶菌酶（FITC-溶菌酶）吸附实验结果显示,通过改变环境的pH和离子强度（I）可以调控涂层毛细管对溶菌酶的吸附和释放,在pH 7（I=10^-5mol/L）条件下,毛细管可以吸附大量的溶菌酶,当条件变为pH 3（I=10^-1mol/L）时,吸附的溶菌酶可以被释放出来。将这种具有溶菌酶可控吸附性能的涂层毛细管用于毛细管电泳在线富集溶菌酶,当PAA链长是PMOXA链长的2.2倍时,溶菌酶的灵敏度增强因子为17.69,检出限为8.7×10^-5g/L;同一天内对溶菌酶连续测定5次以及连续测定5天,峰面积的日内、日间相对标准偏差（RSD）分别为2.9%和4.1%,迁移时间的日内、日间RSD分别为0.9%和2.1%。涂层的制备只需一步,简单易行,而且涂层具有很好的稳定性。本研究为毛细管电泳分析痕量蛋白质提供了一种简单有效的方法。     

Modified poly(phthalazinone ether ketone) membranes for direct methanol fuel cell

Sulfonated poly(phthalazinone ether ketone)s (SPPEK)s were synthesized by the modification of poly(phthalazinone ether ketone) (PPEK) with 98% concentrated sulfuric acid or 98% concentrated sulfuric acid and chlorosulfonic acid mixture at 80–100°C. The presence of sulfonic acid groups in SPPEKs was confirmed by Fourier transform infrared (FTIR) analysis and nuclear magnetic resonance (NMR), and the DSs were determined by Energy Dispersive X‐Ray (EDX). A blend membrane of No. 21 SPPEK and phosphotungstic acid (PWA) was prepared. The methanol permeabilities of SPPEK and blend membranes were about 20 times lower than that of Nafion117 at room temperature. The direct methanol fuel cell (DMFC) test of 2 M methanol solution and air breathing showed that the blend membrane had a better performance than that of the Nafion117. Copyright © 2007 John Wiley & Sons, Ltd.     

Investigation of interaction of Leu-enkephalin with lipid membranes

Enkephalins are peptides with morphine-like activity. To achieve their biological function, they must be transported from an aqueous phase to the lipid-rich environment of their membrane bound receptor proteins. In our study, zeta potential (ZP) method was used to detect the association of Leu-enkephalin and Leu-enkephalinamide with phospholipid liposomes constituted from egg-phosphatidylcholine (EPC), dioleoyl-phosphatidylethanolamine (DOPE), cholesterol (Chol), sphingomyelin (SM) as well as soybean phospholipid (SBPL). Transfer of the peptides over lipid membranes was examined by electrophysiology technique (ET) and fluorescence spectroscopy (FS), and further confirmed using 4-fluoro-7-nitrobenzofurazan (NBD-F) labeled Leu-enkephalin (NBD-F-enkephalin) with confocal laser scanning microscopy method (CLSM). Results of zeta potential showed that enkephalinamide associated with lipid membranes and gradually saturated on the membranes either hydrophobically or electrostatically or both. Data from electrophysiology technique indicated that Leu-enkephalin could cause transmembrane currents, suggesting the transfer of peptides across lipid membranes. Transfer examined by fluorescence spectroscopy implied that it could be separated into three steps, adsorption, transportation and desorption, which was afterward reaffirmed by confocal laser scanning microscopy. Transfer efficiencies of enkephalin across SBPL, EPC/DOPE, EPC/DOPE/SM, EPC/SM and EPC/Chol lipid bilayer membranes were evaluated with ET and CLSM experiments. Results showed that the addition of either sphingomyelin or cholesterol, or negatively charged lipid in lipid membrane composition could lower the transfer efficiency.     

Influence of core configuration and arm structure on solution properties of new thermosensitive star-shaped poly(2-alkyl-2-oxazolines)

New thermoresponsive star-shaped poly(2-isopropyl-2-oxazoline) (PiPrOx) and poly(2-ethyl-2-oxazoline) (PEtOx) with arm grafting to upper rim of calix[8]arene core were synthesized and studied in aqueous solutions by light scattering and turbidimetry methods. The solution behavior was compared with that for polyoxazoline stars with varying positions of arm grafting, i.e., to lower rim of calix[8]arene. The observed growth of the phase separation temperature for PiPrOx as compared to PEtOx is explained by different dehydration temperatures of ethyl- and isopropyloxazoline units. The phase separation temperatures decrease after the changeover from lower rim grafting to upper rim one due to varying configurations of calix[8]arene.     

The effect of the ionophore valinomycin on biomimetic solid supported lipid DPPTE/EPC membranes

Self assembled monolayers and bilayers are produced on a flat glass surface, bound by a thiolipid onto bare gold. 1,2-Dipalmitoyl-sn-Glycero-3-Phosphothioethanol (DPPTE) is used as the molecule binding to the electrode surface. The lipid lambda-alpha-Phosphatidyl-Choline-beta-Oleoyl-g-Palmitoyl (POPC) and the lipid mixture eggphosphatadiylcholine (EPC) are used as spacer lipids with the aim of achieving solid-supported artificial lipid membranes. With the aim of creating and investigating more natural systems, ion carrier proteins such as valinomycin are introduced into the DPPTE/EPC system. The direct influence on the membranes as well as the effects of different ionic solutions on the proteins is shown.     

Potentiometric pH response of membranes prepared with various aminated-poly (vinyl chloride) products

The preparation and potentiometric pH response properties of membranes formulated with various aminated-poly(vinyl chloride) (PVC-NH₂) products are described. Products containing secondary and/or primary amino functional groups are obtained by modifying PVC with mono- and/or diamines, respectively. Blank membranes prepared with either type of aminated-polymer exhibit nearly Nernstian potentiometric pH responses over different pH ranges. In general, membranes based on diamino products exhibit pH response over a wider range (5–10.5) than membranes formulated with monoamino products (<8.0). These potentiometric results are used to estimate the basicity of the various primary and secondary amino sites in the membrane phases.Dedicated to Professer W. Simon on the occasion of his 60th birthday     

Sulfonated poly(phenylene oxide) membranes as promising materials for new proton exchange membranes

Poly(phenylene oxide) (PPO) was sulfonated to different ion exchange capacities (IECs) using chlorosulfonic acid as the sulfonating agent. Tough, ductile films were successfully cast from sulfonated PPO (SPPO) solutions in N‐methyl‐2‐pyrrolidone or N,N‐dimethylformamide. The obtained membranes had good thermal stability revealed by thermogravimetric analysis (TGA). Compared with an unsulfonated PPO membrane, the hydrophilicity and water uptake of the SPPO membranes were enhanced, as shown by reduced contact angles with water. The tensile test indicated that the SPPO membranes with IEC ranging from 0.77 to 2.63 meq/g were tough and strong at ambient conditions and still maintained adequate mechanical strength after immersion in water at room temperature for 24 hr. The results of wide‐angle X‐ray diffraction (WAXD) showed amorphous structures for PPO and SPPO while the peak intensity decreased after sulfonation. The proton conductivity of these SPPO membranes was measured as 1.16 × 10^?2 S/cm at ambient temperature, which is comparable to that of Nafion 112 at similar conditions and in the range needed for high‐performance fuel cell proton exchange membranes. Copyright © 2006 John Wiley & Sons, Ltd.